One of the best most honest video I have ever seen you don't hide any of the problems you had too many videos are just a bowl of cherries and cream and then you don't see the four or five times they've had problems with things. Menu on a great video and thank you for the information

One of the best most honest video I have ever seen you don't hide any of the problems you had too many videos are just a bowl of cherries and cream and then you don't see the four or five times they've had problems with things. Menu on a great video and thank you for the information

I changed the water pump on my 1995 Roadmaster which has an LT1 and I drove it for about 10 minutes and the water pump is blistering hot. It got up to operating temperatures and the hoses seemed to be a normal hot and puffy feel. Advice? Thx

Absolutely pointless video he doesn't even show you him taking off the injectors bad video dude

Thank you for the video, you really explained it well!

wtf is the damn cameraman doing bruh who tf gave this 4 year old the camera

I only replaced the bearing In the pulling the part # 6202 .

I remember that connector for the vapor gas, there is one also at the fuel pump that I had to cut when replacing the fuel pump in our 2004 Corolla, I have special pliers for the lips but nothing works on it sometimes; mechanic shops are no different; they can screw those connectors as easy and there is no way I am paying $1400 to a dealer got the part from Rockauto from manufacturer Standard CP3495, made here, for $280 out the door, saw a Dorman cheaper but made in china, no thanks. A shop down the road wants to charge $250 labor, clear codes and tests; I have a computer and can clear them codes myself, but are them codes suppose to clear once the valve is operating again? the codes point to a stuck valve. Great video.

Does any fluids leak out of the hoses when you replace it? Do you have to clamp the hoses first?

I have no check engine code, each time I fill up gasoline on my 2006 Corolla, I have to rev it up or it will die on me, could that related to this fuel canister?

You guys are awesome! Installed my fuel injection and saved around $1500 on my 2003 6-cylinder chevy express. You're a valuable asset.

Is "spider" a trademarked name or just a generic name?

Where in the engine of the 1997 Toyota Corolla the wire of the vacuum solenoid switch valve connects to ?

Don't feel bad about the 140k. I'm changing mine and I'm at 250k miles on it.

Great video... thanks🤟🏾💯

Superb work and great video.

Just changed my spark plugs and the engine is now shaking and getting a squalling noise when I start the car(2006 Impala). Any suggestions? flashing engine light.

Will this work on 2002 Ford expedition Eddie Bauer edition 5.4l engine to change the transmission fluid and filter?

Don't think you're a good mechanic when you can't even tell us that the slide bolts are different and where they go. Talking about everything else. Besides the stuff that people don't know cause they're not familiar with new technology.😊😅😮

If this is bad or leaking can it cause my car to “crank but not start?”

This video helped me so much! I needed one of these off of a junkyard 08 Toyota Yaris and everything came off easy, even the fuel vapor hose!

Thanks for the video, very helpful

My bracket isn't so easy to get off 😆

I would spread good words about you

Can you get a P0171 code for this???

Is the oil filter accessible from the top of the motor, or from underneath?. I have a 2002 v-6 Intrigue, i hope its similar to this.

None of these videos show removal of back plugs. Dont know what youre doing...dont make the videos

Easy job!!

That tab was the bane of my existence for what felt like an hour. Followed by the rusted bolts. 🥲 I might eventually need to buy a new canister. For now it's just one I pulled from the junk yard that appeared to be in better shape than mine.

This is a Very Accurate Video.. Thanks

sometimes it pays to pay a pro and this is one of those times in my opinion

this looks to involved for me, i will pay a pro

I didn’t see vacuum line hook up, I have one hanging that is supposed to go on the manifold but I cannot find it. It is to control heating and cooling vents on dash.

Great job guys 👍

Great informative videos .I'm doing that on my 96 Sonoma following you step by step. Thanks

Damn good video I like how u showed how to do it if your not replacing the radiator and hoses great job thanks for sharing with us

Awesome, I'm trying to see how the lines come out. Pt1 ends still in. Pt2 starts with them already out.

Where's part 3?

Toyota dealer in Halifax told me today (10 yrs after this video was done) that it would cost about 800 Cdn dollars 2024!!

I dodged a bullet with my residential AC, they said I needed a new contactor and wanted $500 bucks to replace it. I did it for $25. I took my car in this morning and the diags indicate a leak from the evap canister. Their price for replacement was not as bad as the dealer, $700, however with a quick search and your video I'm going to do this myself. Thanks for this.

Do you have any idea on what is holding the 5/16" fuel return line in on an 01 S10??? I have done all the things you have done, but there is no room between the firewall and the valve/rocker arm covers. From what I can feel, there is a bolt down there and some steel or plastic bands below the cover that have to come off then the line should be free. I have the one bolt out past that that is on the transmission but the line still won't come out. Any ideas???

Do you have to remove other parts to get to it?

Nicely done guys I have done a few of these and this video is spot on

So much easier than these modern vehicles with the engine crammed under the hood so tight you can't do anything without engine-out service. I just got rid of my 2013 Chevy Sonic with the junk 1.4L turbo engine and I'm looking at getting an early 2000s Silverado with one of these 4.3L engines. Trying to educate myself on any potential work I may have to do. I changed all of the injectors on a Chevy 3.1L V6 in the parking lot of an apartment building so this job looks very manageable in an apartment parking lot as well.

Hello, for the first time, I'm going through all of that, but I would like to know which spider injector I should order for a 2000 GMC Safari van. Could you advise me on that? I don't want to order the wrong part.

Good videos

Not even any good information on this bro the video is horrible

Thank you, Mr. Dobis! I'm so lucky to have the very same vehicle you used in this video 😊 Very clearly explained!

anyone know where this canister is at on 2001 Corolla ? Front of the car or rear ?

а почему нет на русском титры?