Is that Canadian legal????

That mag release needs to be in a different spot now since it’s not a pistol grip.

Are you guys gonna do an ar10 adaptation?

freakin LOVE IT 1 million % bro keep em coming , talk soon > tom !

I think hornady is making really good decisions. Being in an ar15 is the first good one. Keeping a reasonable twist rate so you can use normal bullets is number 2. Sorry but 8.6 is too expensive, and you are forced to use monolithic, the most expensive type of bullets. If you want supersonic in ar10, there are much better options than 8.6, and for subs 8.6 case is too big and you just dont need an ar10 for subs. Hornady is bringing it to the masses at reasonable prices.

The 8.6 Blk can use cup and core bullets for subsonic just fine. At around 1100 fps in a 1:3 twist the RPM is 264,000, which is fine for most cup and core bullets. The reason Hornady doesn't want to get involved in 8.6 BLK is that if you ran that bullet through a 1:3 twist at say 1400 fps, now you're at 340,000 RPM, which is not 100% safe. You have very little operating margin. So for a company like hornady to mass produce this cartridge for subsonic use in a 1:3 twist, they have to now make barrel length specific cartridges, put warnings everywhere saying absolutely do not use this cartridge in a certain barrel length...etc. Its a massive liability. They could of course just run monolithic like everyone else but that's not the point, wildcat cartridges are boutique, and Hornady adopts cartridges that can be cost optimized and mass produced. They're not going to spend millions on equipment to manufacture cartridges that might turn into grenades if used incorrectly. Hence the 1:5 twist.

I have money take it all

Eugene stoner: this is not what i intended. Not bad though.

Perfect.

Yes

People hate on BCA because the company is owned by criminals. They were formerly Moore Machine Company that produced hot garbage, stiffed a lot of companies on contract orders causing those companies to fold, then were busted by ICE for using illegal workers they didn't pay. None of this is fodder or lore, it's fact. It's all out in the open in legal documents. They closed down for a few years then reopened as Bear Creek Arsenal, same address, same owners. Good on them for getting their act together, but I'll never support them as they screwed over a number of people in the industry that I'm friends with.

That's sick I want one

I had been planning a .338 Spectre AR build but it's been on back burner for some health reasons. I have everything except the BCG and barrel. Just as I was about to have a barrel made for the Spectre, I see the announcements about the 338 ARC. With the 338S I can only find "factory" ammo at SBR. Obviously, Hornad-backed 338A ammo would be more accessible and I'd expect other companies to offer it also. So, the point of this rambling post was to ask "if you were at a point in a build where you could go either way, which would choose?".

I have 5 AR's that i play with it can get expensive tho Especially when you're allergic to cheap stuff least that's what my wife says I've always had bolt guns all my life but I'm having more fun with the AR's there so much more you can do and change.

What a stupid video lol. As if looks matter. You ppl are a joke.

I like putting a heavier Sprinco buffer spring in all my ar15's and ar10's. I find it makes the gun have a softer recoil impulse and they're only like $25. I've tried heavier buffer weights and I couldn't tell a difference.

I bought a nice charging handle at gorillamachining for like 20$ with shipping looking forward to seeing how it performs long term. Upgrades I'd recommend: you need a quality comfortable stock & sling and a bootleg adjustable bcg. Buffer and trigger springs are great cheap upgrades also.

Yea I love colors on my rifle. Olive. With yellow controls. Or. FDE with red controls. 🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉

Now do it in 308!!!

Friends don't let friends buy or shoot RPR's 🤮🤮🤮 Far too many other choices with better factory triggers and barrels. When it comes to upgrades the RPR is one worst platforms sold compared to CZ/Bergara for budget choices. Good on you for teaching the kids safety and proper skills!

If you waited this long to get it done, better get real busy quickly, like he says. I’ve seen this info on several other good sources as well.

i am a huge ultradyne fan. i want the set they have with muzzel device and front site..always thought ultradyne was effective and sharp. ..where who does the stiffle for the hand grip?

What was the velocity?

Might as well just be 8.6 blackout.

hey brotha nick , great setup n happy shootin as always , you keep em coming , talk soon > tom !

Bca has gone downhill on their cs they used to be really good at taking care of issues. Now they just try to ignore you till you fix it yourself. The main issue ive seen lately is piss poor extractors and firing pins. Aside from those issues the guns are usually fine.

Build List here…. eaglerun23.com/blog/f/budget-upgrades-ar15

I hear you shilling BCA alot. Are you sponsored by them at all? Money, ammo, firearms?

2:20 youre the reason why we get shit firearms in the US. Youre jacking off these companies and dont demand perfection. We make the shittiest guns in the US because you guys say" iM NOt TaKIng iT TOo WaR"

I don't see the point... a lever action 5.56? If it was a big bore for a .458 or .50 beowulf I could be on board...

Keep the content rolling 🎉

I believe that thermal and (digital) NV scopes of today are in the same position as red dots were in the 90s: bulky, expensive and some with questionable performance. With incremental development in microprocessors and components, imagine how more compact, reliable, durable and affordable they will be in 10 years. And that’s before talking about how fast software evolves: scopes with integrated range finding, HUD with range and weather information, real time BDC reticles and target tagging will be common place sooner than we realize.

Merry Christmas to everyone

The 8.6 can shoot cup and core only subsonically. It’s supersonically that will rip it apart. Now, does barrel length dictate how fast the bullet gets twisting? That may affect what I just said

Ever moving goalposts:)

Yo man wishing you and the family a very merry Christmas

Nyet, this is fine. /commies

Why not test its ability to cycle subsonic ammo since the 8.6 is primarily for subsonic use?

Youre not allowed to show the name of your channel?

Now that vibes gov not buying up all ammo .. prices will drop some .. will go back up . Mid summer does ever year

looks like a double charge. same thing happened to me in 300 blk sub doing a ladder. case looks the same

Custer sure could have used this at the Little Bighorn !!!!!

look into the cloward piven strategy brother nick , n email me asap what you think about or if you have any questions about it , email me , i know other certain things our gov. does to us , thanks n talk soon > tom !

You know we aren't allowed to make our own food. Buy your food from Walmart like you're supposed to. Haha!

They thought your little white paper rolled packages were joints.

Quality content 👍

Big thing is how it performs in the field. If it hits at 500k rpms, I can imagine the performance of the lead bullet itself would be difficult to predict. It may very well come apart with a lot of spalling inside the game, making harvesting more "fun" than it should be. I just can't see lead holding up when it hits. Now if it does, wow. It would be destructive with the weird trajectories on impact.