Hatsan Hurcules Bully .25 teardown

Taking apart my .25cal bully to fix a air leak.

[@makerofmanythings8447]

Thanks for the tare down man, I really appreciate it. I have a .25cal bully and a .45cal bully. This is helpful, thanks bro.

[@mtairgunner4044]

Thanks, A tip if you do replace the nylon type washer inside the valve, when refilling the gun you might have to dry fire it a few times as it will leak until that gets seated in with the plunger.

[@navaxoalaska3749]

My friend it was big help your video. Thank you very much. Love and respect from Greece.

[@jason3064]

Thanks man✊🏾

[@legolasxD14]

thanks for you video, I appreciate. I have a malfunction with the cocking handle, because when I try to charge the pellet, the handle is blocking against galarian magazine and I need to move it manually to charge the pellet :/ Has anyone had a similar problem?

[@mtairgunner4044]

I have the same problem, only does it with 2 of my magazines and my 3rd one works fine. There is no adjustment that I can see and haven't looked into it to much because I usually only use the one mag. I will try and look into it more next week when I'm off work and see if I can see a way to adjust or fix it.

[@pitbullxl2606]

Great video! Can you delete that biggest bolt on the hammer wen u delete the fill cover plate? Will that effect the weight/impact of the hammer.. And if so would adding weight to it increase power?

[@MWS67]

Can you put a 700cc tank on the bully?

[@pootinhammer]

i need to get an adapter like that, i want to cut the shroud down and mount my ldc directly to the barrel, I dont want that extra shroud length there not really aiding in moderation

[@mtairgunner4044]

When I cut mine down I had a friend make my adapter for me. I have heard that some people called and asked donnyfl and he built them there might be worth a call and ask if they could do it for you.

[@airpower7692]

mine had 2 tiny steel bbs under those springs on the cheek rest

[@mtairgunner4044]

Interesting, I bought this gun as one of Hatsan refurbished deals. Definitely will not do that again as a few things have been messed up with it.

[@esshaw1881]

Thx for the video I would like to ask a question plz when I fill my bully with air after I am done and I bleed the hose out of air it doesn’t stop till it bleeds out the whole bottle I was told that the Irving of the filling valve needs changing my question is is that the one under the bottle or another one

[@mtairgunner4044]

The oring for the fill check you will need to take the whole gun apart to get to it. At 31 minutes in the video will help you with showing where that oring is at.

[@yossshooter1198]

Do you know the size of this oring?

[@trickyman6784]

In the lapse of time 2:08 that screw i my rifle was broken and I can’t find it any help to buy it in somewhere!!

[@mtairgunner4044]

You will have to contact Hatsan and see if they have a replacement or where to get one. On hatsanairgunsusa.com they have a number to call or a form that you can fill out.

[@tahirjamilchaudhary8338]

thnx bro. i have bully. his bypod rail brokn. can u tel me what i do plez

[@mtairgunner4044]

I would remove the plastic bottle cover that has the bipod rail and get a bottle clamp for the bottle that you can hook ur bipod to. You can find them online from donnyfl for a nice one or on eBay you can find 3d printed ones. I use a 3d printed one on mine had has worked great for 2 years so far. Hopefully this will help

[@makerofmanythings8447]

How many shots do you have on your .25 bully?

[@mtairgunner4044]

Not 100% positive, but around 1500 or so between pellets and slugs.

[@poacher.]

good . i like it

[@lachezarkrastev1921]

Where is the breech seal my friend?

[@gilbertmartinez6538]

Did you get a count on all the o-rings? Doesnt look like there is nearly enough in that kit from Hatsan

[@mtairgunner4044]

The kit had every o-ring in it for complete replacement of them all.

[@gilbertmartinez6538]

@@mtairgunner4044 what was the count? ...and are you a gunsmith?

[@mtairgunner4044]

If I remember correctly there is 22 orings in the kit. I do gunsmithing on mine and local guns for air and powder burners.

[@LeMortso]

Thanks so much for the video, but man, your tools make me cringe! Invest in some better machine shop tools PLEASE! Yours are marring up the parts.

[@LeMortso]

How much work was it to remove the probe cover? I see no earthly reason to keep it since the hole goes thru the body anyway... Also hatsan has no listing for the Bully O-Ring set only for the Hercules... will that one work?