Checking for leaks and replacing O-rings. I also show how to take apart the fill port and gauge.
Пікірлер: 26
@deecarter10593 жыл бұрын
Great video. Thanks very much.
@rudy_yazz73074 ай бұрын
hello, really a good, useful video. If I may tell you, what is the original factory size of the thread on the regulator that is connected to the filling tube thread? and what is the thread size on the air filling tube? Is the thread on the regulator M18*1.5 in diameter and the thread on the air filler or large bottle M30*1.5? Is that true? Thank you for helping
@mtairgunner40444 ай бұрын
Thanks, I'm not sure on the thread sizes and have given this to my father-in-law so do not have it anymore to check. You might be able to find out on gatewaytoairguns site there is some really good threads and info on the 700 there
@rudy_yazz73074 ай бұрын
@@mtairgunner4044 okay, thank you for the advice, hopefully you will always be given goodness, thank you
@fuselman913 жыл бұрын
Great vid. Now I know the O ring seizes. Is 1.5 x 13 mm the OD or ID?
@WaschyNumber12 жыл бұрын
Would a 28mm digital gauge fit on this cylinder tube?
@generallee4412 жыл бұрын
Hi, I love your tutorials. they are clear and very well detailed.👌👍 I have a problem with air leaking out of the barrel of my artemis pp700S-A. what do you think is the problem? Which orings would need to be replaced? I disassembled part of the weapon and I noticed that when I wanted to overhaul the barrel it was spinning in a vacuum and it did not lock when it was completely screwed in, is that normal? thank you in advance for your help.
@mtairgunner40442 жыл бұрын
Sounds like your valve pin is not seating, could just be dirty or need to be resmoothed. The barrel spinning is a common problem, some people drill through the receiver up to the part that is spinning and tap so a set screw can be inserted to hold it in place. I have not had to do this so don't have a ton of info on how they do it. Might be worth it to go to an airgun forum and ask. Airgunnation.com or gatewaytoairguns.org
@generallee4412 жыл бұрын
@@mtairgunner4044 I solved the leak problem and resold the pp700 thank you👍
@stefanic882 жыл бұрын
Great video! I cant uncrew my fill port. I see you used an adapter to unscrew it. Where could i get one?
@mtairgunner40442 жыл бұрын
Thanks, The adapter for the gauge on the fill port should have come with the gun in the bag of spare o-rings. If you didn't get one best thing to do would be contacting the company you bought it from and asking about getting one. Hope this helps
@stefanic882 жыл бұрын
@@mtairgunner4044 I did not get the adapter with my gun. But I did manage to remove the pressure gauge with needle nose pliers. Do you have any suggestion on how I could remove the whole fill port from the cylinder?
@mtairgunner40442 жыл бұрын
@@stefanic88 to take mine off I used a Phillips screw driver with rounded shaft that fit all the way through the fill fort. That will give you enough leverage to break it free, then will unscrew by hand.
@stefanic882 жыл бұрын
@@mtairgunner4044 thats what I tried but now I cant unscrew it anymore. Looks like I overtightened it. I am a bit hesitant to use a vice ...
@stefanic882 жыл бұрын
@@mtairgunner4044 Just a thought. Would it help if I heat up the cylinder (degassed of course)? If yes, what would be the best way to do it? Put in in an oven or locally heat up the threaded part?
@abuzarshamsi97662 жыл бұрын
Hi. About the oring size. Is this inner dia or outer dia? I want to replace builtin regulator oring
@stephendavies16683 жыл бұрын
Very informative & useful video! Can you tell me where to obtain the gauge removal tool? Thanks.....
@mtairgunner40443 жыл бұрын
The gauge removal tool comes with the gun, it is in the package with the spare orings. If you didn't get one or can't find it I would got to airgunarcheryfun.ca/ and message Wes and he might be able to get you the tool.
@stephendavies16683 жыл бұрын
@@mtairgunner4044 Thanks for getting back to me. I'm in the UK and I don't think that the removal tool is included with package as sold here. I shall try and source one from a SMK spares stockist. Your video will prove an indispensable resource to anyone attempting seal replacement on one of these pistols.
@ragotphilippeh64962 жыл бұрын
Hi bro Great video, very interesting thank you for uploading. My question : I can see that you have a Huma Air regulator. Is it stock or did you install it yourself ?
@mtairgunner40442 жыл бұрын
Thanks, I installed the huma regulator. They are very easy to install.
@ragotphilippeh64962 жыл бұрын
@@mtairgunner4044 Thanks you bro !
@ragotphilippeh64962 жыл бұрын
@@mtairgunner4044 Thanks you bro !
@user-ou1og5fo1p11 ай бұрын
Здравствуйте в Россию отправите клапан и редуктор ?