Any updates/improvements on this project?

I've built plenty of wireless devices, but somehow was always able to get away with modules. Some modules you can get nowadays are just incredible - there's an entire eco system of modules based onthe nRF offerigns. Now, I am working on a device that will need it's own antenna and this video is just the ticket!

und uf züridütsch?😂

Thanks for your video! Can you recommend a cheap/affordable shortwave radio to detect emissions within the home please? The models in your video look to cost around the £200 mark which seems a bit pricey for me, but I am not familiar with how much they should cost and what functionalities are required. Thank you!

Even with my €900k lab I still love using the rtl sdr( yes got waaay more powerful toys( no cant use these if you got only ham license). Its simple it works, though my antennas 100% dont fit in a cuppboard unless I can get a 20m cuppboard😅

GREETINGS from Va. W4GDM

I know this is 2 years old but something I didn’t see mentioned. If you add a second 1/4 wave stub spaced 1/4 wave from the first you will get a deeper and sharper notch. I don’t know how far you can take that, might get unwieldy after a few. You can make it tuneable also by adding a variable capacitor across the far end.

Hi there, I hope someone see this. I am doing the process for the rpi 5, in the git the image says it has rpi 5 support but when I go burn the image to the sd card I get “MBR DOES NOT HAVE A VALID SIGNATURE”. Does anyone recognize or know how to fix this?

This gentleman sounds exactly like Andreas Spiess, the guy with the Swiss accent.

That fancy SDR unit is amazing!

Try Halow combined 802.11ah for long distance and 802.11s for additional distance using mesh. Halow on lower frequencies and higher output power with mimo would be even beter like 64mbps oker 7kms. Give it an HT formfactor with two mimo antenas and internal normal wifi and ethernet port for your small devices to connect to then you could have your tacticool civilian manet. Use zello or briar over large areas with no cellular coverage

Thanks again for yet another amazing video. Do we need a ham radio license to experiment with this?

That will want to connect to any eero pro 6 mesh router that is nearby.

Thanks so much for all your excellent videos!

how do you load the drivers for the Heltec v2 board ? My pc wont recognize the boards.

Hi !!! Greetings from Buenos Aires, Argentina. I bought two Baofeng Handies, the cheapest ones, the simplest ones, BF999S, how can I send data from DB9 to handy number 1, receive data on handy number 2, and decode it with arduino uno and RS232 module HW-044 ? , and show that data on a cheap OLED display like 1.3" (GND, VCC, SCL, SDA) Thanks so much !!!!!!!

is it more powerful than meshstastic?

Thks & I can't wait for LoRa satellite relays

Thank you for a truly great presentation. I have a VHF SA818 Firmware Version 1.1 - When I invoke filters --emphasis disable --highpass disable --lowpass disable SA818: INFO: +DMOSETFILTER:0 filters [Pre/De]emphasis: disabled, high-pass: disabled, low-pass: disabled and indeed a waterfall of the receive shows the filters to be disabled - UNTIL I transmit, then at least the low pass filter is restored. I was hoping to use an external ctcss/data decoder, but that will not work when the low pass filter returns after transmit... Any ideas ??? es Thank You agn, de nu5d

Are configurations for Cisco phone available?

I Iuse RTL:SDR V3 With USB Thats Like A Coax Cable, Its Trabnsparrent And You Can See The Mesh Like Wires Around It And I USe That, Friend Who Dumpster Dives Gave It To Me, Im So Thankful To Him :)

0:20 I BBought The One At The Bottom RIght, Turned Out TTo be A Scam Ebaay Seller. Lost My Money :( And Im DIRT POOR ! It Was Quarter Of My Months Pay !

which is the frequency for lora aprs in europe? i am in greece

Please don't add your personal "photo" to the thumbnail - nobody want's to watch when they see that.

Hi Andreas. I really liked this video. Can the CP2104 module connect a photocoupler like the TLP222A to ground? This would be very handy for driving a sequence of my driver amp and PA. I can of course put the footswitch in parallel to a path to ground. 73 David M0YDH

Hi, can we use a SDR Rx radio to accurately measure the FM frequency deviation. ie. as a deviation meter to check the transmitter drive level? any thoughts? thanks regards Nigel ZL2SEA

Very good presentation! 73 de K5VA

For a second there you sounded like the backwards voice on twin peaks. Great content though. Thanks

This channel looks really interesting. Subbed here.

Guten Tag, dürfen HB3 Funker auch AREDN betreiben? 73s von HB3XYR

Hi! It seems that you tested it without the RF source component. This way you tested the RF path and anthenna with the matching components. My question is: how to test it with the RF component populated? Because we don't know the its pin's impedance, so we need to match the impedance with the component populated. Thanks!

Oh man, thanks for the great video! the familiar “Swiss Distortion” explains wonderful lectures! Like your other channel so much. 73 DE BA4QFU

Always great channel ❤

Hello Mr. Andreas. I'm Aykut Kaplan. I'm a member of a search and rescue team in Turkey. I want to build a device that can detect people behind walls in earthquake debris. I need your help. Can we get in touch?

I wonder if IPv6 would also be a solution for this project? Cellular providers seem to mostly provide IPv6 addresses which are all globally routable. I am not sure if the cellular providers will just block all incomming connections though.

Very neat, stumbled upon this while looking at options to build some new Fox Transmitters. I want to broadcast recorded voice audio rather than what sounds like musical tones. Have more fun taunting people. :)

How did you calculate or measure the cable delay ?

Do you know if there is any SPICE model to run a simulation ?

Dude, didn't know you had this Chanel. I've been missing out.

Why hasn't anyone made a dual mode APRS (AX25 and LoRA) digipeater on 2 metres? In the UK the 70cm frequency is right in the middle of the licence-free ISM band, and most people who are raving about LoRA/Meshtastic are using the non Amateur allocation around 800 MHz, to be honest, Meshtastic is just a craze, as soon as people realise that it is only SMS they will rapidly get bored with it, it is reinventing the wheel a bit because you can doing everything already using standard APRS. So why not a dual-band AX25 and LoRA digipeater iGate on 144MHz?

How far can you be for this to work?

One comment on this. SmartSDR for FlexRadio, which is included with every FLEX-6000 radio is plug and play and a VPN is not required at all to operate remotely. It even provides a secure connection to your radio and you do not require any network skills. Zero Tier is a great solution for accessing all the other devices on your network.

Are you going to produce a video showing how to set up a gateway? I'm in the US, and with a HAM license I can transmit up to 10 watts.

Well done as always!!! Cheers* K4PMO

I have just bought myself a LiteVNA 64 and the first problem is how to test an antenna that only has an ipex connector. It is the small antenna that comes with a Heltec V3. Any ideas?

How do you remove the cap from the black antenna? I want to use the same case as you...

What you want is an I2S stereo CODEC talking to the RPI or ESP32. Split the stereo to L = LocalAudio, R = RadioAudio - with the individual channels optimized. If you want more radio modules, they make 4-channel I2S codec that only needs the single I2S data-lane (2x16-bit split audio channels per 32-bit I2S channel period). That would still work with a minimal ESP32, and would give you another 2x radio slots for 3x total radios and a local mic/speaker.

The Rattlegram app would be great if it didn't have the huge drawback, which is that it doesn't work with the lock screen.

Does the phonebook use hash or blockchain validation?

Genius! Great Video, I have tested it on the bench today and it works great ! de S79KW