How do you change the size later so the roller is not 750cm long?

Hi, great video. Please could you do a video on how to create clay extruder applicator for clay crafters? It looks like a wing nut drill applicator. Thank you ☺️

True artistree!

Wow glad i found you!

CRACK!!!!

I am having trouble with the vertex group, it doesn’t cover the entire cylinder, what am I doing wrong I follow all the steps

I can’t even highlight the whole cylinder.. do you lock it ??

you should print it in yellow clear resin so it can be lit.

I have tried this over a dozen times now, following the tutorial to the T, and it comes out great. BUT, when I save as stl and then open in my Slicing software (flashforge), it comes through broken. Any advice?

Awesome video :-) Can you mabye tell how to use a non seamless picture and turn it into a rolling pin ?

you gotta be able to afford a 3D printer to do this.

Yes, as an experienced blender user... I found I had the same problem as others did with it applying the displace modifier to the inner cylinder as well as the outer one even though I made my vertex group and applied it. You must apply the solidify modifier (by clicking the little down arrow icon next to the modifier and selecting apply).. THEN make the vertex group and add displace...etc. Took me a minute to figure out that's what I was doing wrong. Thx for the tut!.

This is a very helpful tutorial, very easy to understand. Thank you

For anyone still doing this and getting trouble, make sure you APPLY the modifiers which can be found in the little down arrow on each modifier and you need to get out of edit mode to apply it .. Thanks for this tutorial

I follow all the steps perfectly but after 2:28 it doesn't work. the next steps do nothing for me - Subdivision surface and displace modifier. when I add the texture for displace modifier nothing happens. this is my 4th attempt following this guide. EDIT- Finally got it using EmperorGuam's Tutorial.

This looks amazing, will have to try it eventually. Have you considered making a corrugated steel roller for things like factory roofs?

i was able to do this once. then when back and did the same tutorial and i dont get smooth inside anymore.. dont know what wrong

This is fantastic! Thank you... what material/type of plastic did you use to print this roller with? I'm looking at the Creality Ender-3 V2 and hoping it would be able to make rolling pins!

HEY @Craft Logic how y doing? can y help me, i am new to the blender and i want to know how did y exacly step by step (like y are teaching a 3 years old kid) how did y made the inside of the object smooth? thx

Can you do a updated video on this please 🙏

I added Blender and when it opens there is a cute band another like triangle. How you you remover them? And thank you for the amazing help with designing. I so need it

When I click tab .n going into edit mode it doesn't select inside of the cylinder. For that reason m going anable to select only outside vertex group. In the end texture goes inside too. Please make one video with latest version please. Thanks in advance

ya any texture with this method you cannot rotate the displacment its beyond annoying i just want it sideways not streight up like fk blender

How tf are you selecting the whole edge like that the most crucial step you do not explain R.I.P tecxture roller

CTRL R does not add loop cuts

Man I'm just here trying to find a way to make pelts for my minis

Hi thank you so much for tutorial. however you do go a bit fast and rewinding many many times I still cant keep up. I get lost round about 2.30. The key settings ar not the same on my version of blender so by the time i search for what you are saying, I am lost again. I sound unapreciative but I dont mean to. Thank you for trying. 😊

Really enjoyed this video! I learned a lot, thank you! I followed along and duplicated the size you used and made my own roller, when I took the file over to cura to slice it the roller was tiny!! Not sure what I didn't wrong.

Where can I download the files?

This is one of the worse tutorials I've come across on You Tube. It's all very well you know what you are talking about, you have to assume though that your audience knows diddly squat. To that end you need to.. 1) Talk slower and stop waving your mouse around as you speak. 2) Make sure you clearly and slowly explain what mouse clicks you are doing at the same time as your narrative. 3) Don't automatically assume your audience knows anything.. e.g. you need to explain how to select the faces or whatever they are. Your viewer doesn't know you are holding down the shift key in order to do so. 4) Different versions of Blender have different options submenus (or whatever they are called).. i.e. the Modifier submenu in 3.4.1. is different to the one you are using as are some of the others. You have complete nupties to Blender, like me, before we've figured out what you've done and found where the "apply" button has been hidden, you're 5 steps ahead. 5) You were far too quick going over the textures (as with everything else).. An explanation as to the fact that the ones you called up are not part of Blender and what you are supposed to be looking for on Google would have helped. Having said all that I thank you for sharing your knowledge with us lesser mortals to whom Blender and other 3D software are a nightmare..

How well does it work on xps foam though?

Awesome video, really easy to follow and I managed to make my first roller. The only thing I cannot do is making the centre smooth... help!

Hello, thank you for the tutorial. At the stage 'adding the texture' - nothing happens when I add it, however I need my roller to be much smaller (radius is 30mm) - is this why I'm not getting a texture appear? Adjusting the strength does not solve this. Thanks in advance for the help.

Is that pla or resin to print that roller?

When i create mine for some reason i cant get my pattern to come out clear and crisp. I do have a much more detailed pattern so didnt know if there might be some additional steps that i may need to take to get mine to work. could you help me?

Thanks for the video! Does this method works on newer versions of Blender? I'm stuck on min 1:35, it selects different (only outer shell) and nothing works afterwards. Not sure what it is I am doing wrong, so looking forward to making these!

спасибо за подробные разъяснения 🤝👍

Thank you so much! The tutorial is great! How do you save the file? When I am trying to export the file as stl the size is 450 MB :(

amazing!! Thank you

The end result looks awesome. The only thing I would change is to make the pattern a little less regular, most old buildings with shingles don't have them all exactly the same size. Shingles also get replaced often because originally they were just held in place with wooden pegs. My parents live in a 500 year old house, listed building, so they still have to fix their roof the old fashioned way with shitty pegs.

I'm after a granite stone block texture so I can make slips that can be printed, painted and applied to a wall to give the effect of real stone like you would find in say a old castle. I get involved with sfx with a local film school that runs classes for young people in the holidays and this is the only way I can see to create something like this. Trying to build a relatively cheap set to create a stone arched doorway. Thanks

Hiho! Thanks for the hints! I needed a few hours to find my fault why i also could not exclude the inner side from being textured. In the current 3.3 Blender i found the APLLY option for the solidify modifier behind the camera symbol in a dropdown menue. After applying this i could proceed as described. It is a pity that the UIs from Blender and zBrush make it so difficult to use them. Years ago i had a program called Cubify Sculpt, where you simply said wrap that picture along a path and voila it was wrapped. Only issue was that it could not doe it seamless and there was always a few milimeter seam.

Okay is anyone else insanely frustrated with this tutorial? How does he select the inside and the outside of the cylinder? When I click tab it only selects the outside. He also pans out to a different view and is able to select the entire cylinder without circling around the whole thing with the mouse.

I still get the texture on the inside of the cylinder even after making the group. Is there a trick to selecting only the outside?

I got lost somewhere at loop cuts.

How did you select the vertex on the inside of the cylinder. So no texture will not appear on the inside of the cylinder.

Do you have a method on how to print that roller for resin printing?

Amazing tutorial, my mind is now blown with the possibilities of this 🙌❤️

For the mace spikes, you could actually only make one side, then join the spikes to use the mirror modiifier instead of copying everything. When you join the mace and spikes using boolean, as long as the spikes have the modifier active it will work as if they are a single model. Just my opinion XD . Great tutorial tho!. Subdivision modifier is a powerfull tool when modeling (also can make your computer cry if you go beyond its limits).

Everytime i want to print somthing. i first search for files to look for options, every time i end up deciding to make something myself because i can't find what i want or i don't like the way it's already made, i end up on a blender tutorial, and its totally worth it. I learned a lot more than i thought i would with this tutorial, i didn't knew how to setup a vertex group before. Thanks a lot man!