This is doable with 6 jack stands and a warm garage yes?

Thanks for this awesome video. I followed your advice step by step and I was able to do this job by myself! Thanks.

i wonder if this would work on my 2010 F-150. maybe i could buy this and modify it with angle grinder if the frames are same width.

So I've had this issue for almost 3 years and didn't know how to resolve it, I had to disconnect the cable that indicates the trunk is open so it won't kill the car battery, and I casually strolled into KZbin and found your video, just tried it and boom it worked, Thank you so much man I sincerely appreciate 😊😊

What if I want to change the gear oil filter for it?

Finally someone with something helpful. Great video. Even if my 2011 2.0tdi 140hp don't show fault code, it bangs, loose power, and as soon as it's slightly warming up it's gone. Have also changed the dcf but did not fix it. Well it fixed the rattling from the dcf so still happy I did that job(the garage did, 1700$). Well I think it's time for an obd checkup while doing it. In Norway it's NOT 450$ for 4 new injectors. Great help man👍

I really like the idea of using ODB reader to measure the temperature, as I do not have an thermal gun for this purpose. Is there any difference between 2011 Sienna and 2017-2021? Mine is 2011 and I don't seem to see any difference in the procedure.

Do you know if this would be the same procedure for the 2024 pilot with the 10 spd? Thank you in advance. Good video

Thanks for this in-depth look at the 2007. Mine needed very little to pass safety, a testament to their attention to build quality. The car runs amazingly...waiting for my next big road trip!

Cheaper than a transmission for sure

Had same issue. Encountered mine at 70k. Fluid drain and fill did the trick. More religious about changing after that

Hi...hows the sticky tape holding up?please share your long term feedback

Your a BETA male

How does this guy know so much about transmission fluid but missed removing 2 bolts so he could access the fill cap

Was going to originally get this done at the dealership, but after watching this video and Car Care Nut's video.. I think I'll save myself money and do it myself. Thank you!

I've got an 05' F-150 xlt supercrew cab 5.4L 3v, 79k miles....i thought i had enough problems trying to fix timing...I've got a slap, only thing reading on diagnostic is VVT solenoids...so i bought Motorcraft...truck has been sitting for 2 years in a part of my driveway that collects a few inches of water when it rains...my 16yr old daughter wants the truck...im scared to look after i seen your video...lol New Sub! Looks you went above and beyond for the customer...and did a great job...a would gamble and say you have decades under a hood...I grew up in a big garage with any tool i needed because my father and grandfather were both diesel mechanics by trade....my father had 2 very bad strokes, and has dementia now and lives in a rest home....we had planned in moving to Myrtle Beach SC, from Kentucky when he retired with the whole family...they were about to close on a beautiful property with 3 garages, where we were to build that hotrod we had talked about since i was a kid, spending late nights at the garage getting cars finished....he had 55 and 57 he sold when i was very young...i had a 79 monte carlo we played around with when i was a teenager....but we hadn't picked a chasis....but sadly he had a stroke 2 months before retirement and one a year to the day a second stroke that debilitated him...the 05 truck I'm fixing was his, when they took his license, he gave me the truck....and i wouldn't sell it for all the tea in China, i sure miss not having a garage just to pull in, with air lines a roll around for metric, and a roll aroundfor standard, didn't have a lift though, they worked on alot of busses, and big floor jacks, and big ol jack stands, i couldn't tell you how many pizzas i ate with my father working late at the garage in the 80's, id love to wash my hands again with that old GoJo hand cleaner, and get cleaned up and eat pizza with my father again,.. But, im real scared to look under it now...😬✌️

Like .Thank you. Hello from Ukraine.

Great report !!! Thanks for info. Very pertinent information. 👍🏿

Crazy you did it with 1 gallon. My 2.4 gdi 2012 optima manual says 7.5 us qt. Which I got similar extract I did measure it. That’s just shy of 2 gallons. Also to people scared of using the valvoline. My owners manual says ATF sp-IV Kia genuine or other brands meeting above specifications. Good thing I had bought 2 gallons just incase. Though I should have checked the manual first.

I accidentally removed a 14mm little bolt from right behind/under the plastic overflow cap. A few drops came out of it but it appeared to not really do much. Did locate the actual drain plug with magnet after wards…… hopefully my transmission isn’t broken now ha lol! Does anyone know what the little bolt near directly under behind the overflow cap does? Man, I always do something stupid doing repairs and maintenance on the cars!

Great video. Straight to the point. Looks like my next project on my truck

How much oil is required for toyota avalon 2015

When screwing into the soffit to fasten the wire clips, are you only going into hollow vinyl or is there wood behind the vinyl you’re hitting?

I have had to make my own weldable plates but I sprayed all the rust with this product that turns rust back to metal first. Then I did all the welding and after that sprayed everything inside and out with undercoating. This was 5 yrs ago and I sold the truck last year and the guy that bought it is using it to haul hay rolls to peoples cattle ranchs and he knew about the frame but still says he has had no issues out of it at all. He has also stated that no rust has come back at all. I think the rust converter was a very good idea and would recommend that that part of the process to be added to any rust repair. This is the product that I used for this Rust-Oleum Rust Reformer Spray Black. I got it from amazon which was the cheapest place to get it. I liked it so much I have started using it on every car or truck I buy just to prevent rust from starting. Its that good and no I do nit have an Amazon store lol

Do all these pilots have the same issue.? I feel like every channel talks about transmission problems. I was looking to buy one but every time I watch a video someone is always working on the tranny. Is this car even worth buying??

The question is. Should we be in neutral or park when setting the level after reaching correct temp? Should we be at neutral or park after cycling park drive neutral?

When I did my Toyota. There is a obd2 jumper method to check trans temp without scanner. Some people say just check pan temp with temperature laser gun, others say no because outside pan temp is not accurate to inside. I did both methods at the same time to check accuracy. My temperature gun was about 5 degrees lower when the obd2 jumper method to dash lights kicked on. In most cases I think temp gun to transmission pan is accurate enough. The temp gun is say is 5-10 degrees reading under the temp inside the trans pan

i have a 2010 nissan altima 3.5sr the transmission slips a lot it runs and drives fine it’s just making a loud noise, could the fluid possibly be empty or do i need a transmission replacement

I have a 2006 honda pilot and I've noticed a couple differences. 1 - the owners manual doesn't say anything about waiting 60 seconds and not longer than 90 seconds or whatever and 2 - my transmission dipstick seems a little different. The 2 dot hole marks seem to be more towards the end of dipstick compared to yours.

I have a 2015 Santa Fe limited 6 cylinder watched your video.Very easy , how long did it take to do this transmission fluid job.

Does this not have a transfer case?

I've been having this problem for the past 2months with most mechanic unable to sort it out. I will now return to instruct them on changing this . I did some personal checks and found oil all over my oil sump. Thank you Thank you Thank you. This video is very helpful

What about the filter?

What gear car should be on when I drain and fill transmission with fluid? Parking or neutral? Thank you.

My 2015 IS was totaled in June. I found a mint condition garage kept 2012 LS for sale 134k mile for 13k and thought I was downgrading because of the age..boy was I wrong. I have driven a Saab..and Infiniti G35 and the IS but this is by far the best sedan I’ve ever driven. Thankful it does not have air suspension or AWD. Only complaint is the material on the arm rest and the glove box look dirty and I wish I could have them replaced. Enjoyed the video you were spot on

Thanks!

This was fantastic, thank you so much. Where does the air go when you pump the fluid into the trans? What torquewrench are you using?

Does the vehicle need to be completely level or can I get away with jacking up the front?

Great tutorial. Wish all videos were like this one.

Great Video. I do have a question though, don't you need to actually drive the car in all gears for the fluid to circulate through? I feel like simply cycling through the gears while stationary might not do the job. Curious to know.

I appreciate the simplicity of how you explained things. Im surprised at the complaints from some people who prove they dont have enough experience to do this successfully.

Landed Stuart last time and was watching this unique historical airplane. It's just amazing.

Will this part work on a SuperCrew Cab model? 2007

My husband has been eyeing these for a long time. I finally let him bite the bullet. We just got ours yesterday, and we have the curtain lights on the garage door. They are just phenomenal. Our neighborhood is pretty dark, and I know our neighbor will appreciate the extra lighting for evening walks.

Thanks Man your video help me so much

Where is the auto trans fill level port. Also my 20q6 all wheel drive has NO trans lipstick. And where are the drain and fill ports for the transfer case???

Where is the auto trans fill level port. Also my 20q6 all wheel drive has NO trans lipstick. And where are the drain and fill ports for the transfer case???

You know where to buy the fill cap?

Sure it's easy > > > if you have a LIFT!🙄 Try doing it laying on the ground. Also... aren't there aftermarket dipsticks that can be installed on the later model F150's... you know like the good old days when vehicles HAD DIPSTICKS!

Excellent video bud! Thank you so much. My 150 foot Pro lights will be here soon. I can't wait to get em up and rockin!