You HAVE to Play SPACE MARINE VR!
7:48
Golden Demon Was Awesome
2:33:27
28 күн бұрын
New Kill Team & Space Marine 2!
1:33:41
How are you SUPPOSED to get into 40K?
1:42:02
2x Slayer Sword Winner Neil Hollis
1:54:57
New Releases & Price Increases!
2:14:57
Games Workshop Broke the Internet
1:33:04
When will Warhammer be Mainstream?
1:22:41
Пікірлер
@M1903Enjoyer
@M1903Enjoyer 17 минут бұрын
How am I just seeing Peachy built a gunpla, and it's my favorite Mobile Suit/Gundam. Although, like a couple, others said an MGEX is a higher bar to start with, but not bad as an experienced hobbiest
@ethanswatzell
@ethanswatzell 48 минут бұрын
Regarding the mixing ratio for Pro Acryl paints, I had the exact same problem as Geoff did. I followed the 1:1 recommendation from Warrick's video and had clogging issues on the Ultra. After some trail and error, I've settled on a rough 1:2 (paint to thinner) ratio, and if that's too thin and runs I'll put one more drop of paint into the mixture. I also found it helpful to drop the PSI a bit from his recommendation. It seemed to be blasting the paint out so forcefully that it was bouncing off the surface.
@thepaintingphase
@thepaintingphase 4 минут бұрын
You’ve made me feel a lot better, thanks - Geoff
@cliveg1395
@cliveg1395 Сағат бұрын
Thanks and sympathy re the howl of pain in learning airbrushing ... it made me feel a lot better given my last attempt.
@thepaintingphase
@thepaintingphase 8 минут бұрын
We’re in it together Brother - Geoff
@AsparagusX
@AsparagusX Сағат бұрын
Regarding those special models: unless GW explicitly says they will be writing game rules in the specific game that I play, then I always assume they will never ever get rules, Legends or otherwise. In fact, even when GW says they are writing rules, I refuse to believe them and just assume GW is lying straight to my face! Until the rules are in my hand, there are no rules and never will be any rules.
@thepaintingphase
@thepaintingphase 6 минут бұрын
Wise man.
@pete104242
@pete104242 2 сағат бұрын
A few things about kill team, I have the starter here. The learn to play is very well structured, the scenery is actually very impressive, would love GW to make more MDF terrain and I get bored painting the plastic. The playing mat is actually thick card, double sided, not paper. Great video though guys!
@FauxHammer
@FauxHammer 12 минут бұрын
I’m so excited to get started when I get home
@thepaintingphase
@thepaintingphase 9 минут бұрын
Great reply. Sorry about getting the mat wrong.
@Paintbetterthan
@Paintbetterthan 2 сағат бұрын
Sexy spam returns! These scammers must paint minis between scams 😮
@benjaminrogers8875
@benjaminrogers8875 20 минут бұрын
It's the only way to afford them 🥲
@simonoldfield9366
@simonoldfield9366 3 сағат бұрын
When you start an episode with absolute certainty you will come out wiser that when you went in
@dreadtrain2846
@dreadtrain2846 3 сағат бұрын
The motor burns out faster on compressors without tanks because they are always running. Whoever said there is no difference is full of something.
@samwright1821
@samwright1821 3 сағат бұрын
Will any of you guys be picking up Halo Flashpoint at the end of the month?
@AlexiBerthe
@AlexiBerthe 3 сағат бұрын
no way it's that simple....
@necaacen
@necaacen 4 сағат бұрын
you are correct, elon musk is a weird and unpleasant human being.
@Tribune43
@Tribune43 4 сағат бұрын
Type Flory Models airbrushing in youtube and watch his tutorials. Well worth a gander and might help solve some of your issues. Number 1 tip - put your thinner into the cup first. Also, make sure you're using the right thinner for the right paints. There's a universal chart on google you can check.
@QuangHồngViệtệt
@QuangHồngViệtệt 5 сағат бұрын
My idea of a perfect date involves food, a cozy blanket, and a lively debate about the proper way to pronounce "gif.💖
@FauxHammer
@FauxHammer 11 минут бұрын
Do you know how much shit we’ve already had regarding AI! You’re not helping Robot Pants
@TrầnThanhThủyủy-r8u
@TrầnThanhThủyủy-r8u 5 сағат бұрын
Can we just agree that brunch should always involve bottomless mimosas and no judgment about second helpings🧡
@virusj216
@virusj216 7 сағат бұрын
oo... we didn't get much posing :( Refer to the instruction manual and the box if you want some great poses!
@shiroyasha4995
@shiroyasha4995 12 сағат бұрын
building a gundam is just like building a tau battllesuit.. you just dont paint them (usually)
@Reuizi
@Reuizi 14 сағат бұрын
8:05 its supposed to be "which one them pray to Tzeentch demon?! "
@henryramirez6106
@henryramirez6106 17 сағат бұрын
For those who just love to customize their model kits, gunpla is in it's own world.
@Nortic111
@Nortic111 21 сағат бұрын
Loved the final presentation! And as much as I still adore any of the 90s models it is the 2010s that's the decade for me.
@Folsomdsf2
@Folsomdsf2 Күн бұрын
FYI, the ver 2.0 of your rg rx 78-2 kit is wildly better.
@Flip5ide
@Flip5ide Күн бұрын
So are you panel lining and customizing yet?
@mowaiken2002101
@mowaiken2002101 Күн бұрын
games workshop engineers could learn a thing or two ..... you know what, they can start in bandai as a freaking intern because the nub placement design in GW's plastic models are fucking ATROCIOUS.
@_gungrave_6802
@_gungrave_6802 21 сағат бұрын
The thing is they know it's bad, but people keep buying that trash. Secondly Bandai's gunpla kits are better because unlike GW they will release newer versions if an older version is deemed to be defective or of poor quality.
@mowaiken2002101
@mowaiken2002101 18 сағат бұрын
@@_gungrave_6802 and also WAAAAY cheaper if compare the amount of plastic and price ratio.
@OptimusMonk01
@OptimusMonk01 Күн бұрын
How's the dole queue working out for you?
@thepaintingphase
@thepaintingphase 10 сағат бұрын
Sorry?
@user-fb2gr3rr3i
@user-fb2gr3rr3i Күн бұрын
Meanwhile it'll be canonically compliant if I just assembled my Iron Hands astartes and played them
@pipfpv7489
@pipfpv7489 Күн бұрын
10:04 now that's clever, stuffing a piece of sponge into one of those brush protectors. i've never seen that before.
@juanferrer5392
@juanferrer5392 Күн бұрын
thats the thing u will break this kit XD
@eaglesfly5236
@eaglesfly5236 Күн бұрын
90's
@kazthehack
@kazthehack Күн бұрын
First look on the thumbnail i thought its going to be a Hot Ones x Gundam crossover
@Prime92
@Prime92 Күн бұрын
There are clear Master Grades as well. You might like one of those since the inner frame is solid, and then the armor is clear.
@_gungrave_6802
@_gungrave_6802 21 сағат бұрын
Clear ones are a stupid purchase to make you spend more than the base version.
@Prime92
@Prime92 5 сағат бұрын
@@_gungrave_6802 If you want to see the inner frame, then it's still a good choice.
@Anton-lt6si
@Anton-lt6si Күн бұрын
the name of my legion is eyes of the moon
@robertpalmer9531
@robertpalmer9531 2 күн бұрын
DAMN. Driving right in to the deep end. This, I my opinion is just 1 step down from the perfect garde unleashed. But this is the BEST build I ever did.
@torifin755
@torifin755 2 күн бұрын
"what devilry is this? who have they- (mass confusion)" Bandai. thats all i can say, Bandai. they are the KINGS of Plamo
@willisjackson7029
@willisjackson7029 2 күн бұрын
I took the much older MG Gouf Custom and I painted and detailed the entire inner frame a few years ago and it was the first time I detailed a kit like that. So I understand what you mean by there’s all of this detail and most people won’t know what’s underneath the armor unless you pop some of the armor off.
@MazdaTiger
@MazdaTiger 2 күн бұрын
try 30 minuite missions for the whole glueless custom kitbash experience, you can also paint them as well
@Airsaber
@Airsaber 2 күн бұрын
Nice! A bit of a hard mode choice for the first gunpla, though. And don't worry - if you handle them well, gunpla kits aren't as fragile as they might seem. What's the music in the video? It's a great track, very space-like!
@yuuyuuyuu4661
@yuuyuuyuu4661 2 күн бұрын
i just watched the other youtuber video similar to this, congrats and enjoy the gunpla journey
@S.A.S.H.
@S.A.S.H. 2 күн бұрын
I, too, just discovered Gundam thanks to Louise's recent video on it. In 6 days I've watched the entire Gundam: Origins series, 8 or 10 of the OG series, and the entirety of Requiem for Vengeance on Netflix, which is superb. And yesterday I bought my first three kits, two HG and an RG. And discoverd Mache Gaikotsu's videos. "Ikea meets lego" is a perfect analogy.
@_gungrave_6802
@_gungrave_6802 21 сағат бұрын
Must watch series is Mobile Suit Gundam(1979 show), 08th MS Team, 0080 War in the Pocket, 0083 Stardust Memory, Zeta Gundam, ZZ Gundam(this kind of sucks), Char's Counterattack, Gundam Unicorn, and Gundam Narrative all of which should be watched in that order. All of those are set in the same universe called Universal Century aka UC which is a futuristic version of our world. Aside from some UC content I didn't mention all other Gundam series take place in an alternate universe. Things like G Gundam, Gundam Wing, Gundam 00(2 seasons and a movie), Gundam SEED(Its dogshit, don't watch it), After War Gundam X, Turn ∀ Gundam, Iron Blooded Orphans(don't watch this if you're depressed), among many others. Some of the older shows haven't aged as well but most of the older UC shows come from the age where hand drawn animation was still a thing. 08th MS Team quite literally has one of if not the best fights in history that has ever been animated with Shiro Armada in the Ez8 fighting Norris Packard in his Gouf Custom.
@S.A.S.H.
@S.A.S.H. 10 сағат бұрын
@@_gungrave_6802 I greatly appreciate the guidance. Thanks!
@thedandy6765
@thedandy6765 2 күн бұрын
single nipping is something that leaves less clean cut i always do a double snip leave a 2mm nub then once all parts are cut out of the arm/leg so on and then i snip it flush leaving zero to no cleanup needed
@keithgoh123
@keithgoh123 2 күн бұрын
Literally building the best kit that Bandai has released to date. Now go build the 1st RG lmao
@dylanconnelly9845
@dylanconnelly9845 2 күн бұрын
jumping in with not only a MG but a MGEX is mad lad stuff as for nippers I go with the DSPIAE 3.0 nippers they cut so clean and they aren't as expensive or as high maintenance as a pair of God Hands and I go with Tamiya slim jaw point for tighter spaces
@inperium7315
@inperium7315 2 күн бұрын
CTM TE ODIO WN
@taloscurze5826
@taloscurze5826 2 күн бұрын
Next steps. Modding. Scribing, painting, light kits, and dioramas. I've been into WH and Gunpla since I was a kid in the late 80s.
@BOSSposes
@BOSSposes 3 күн бұрын
Just say Gundam not Gun-dahm just watch anime and oyull know how to pronounce it lol 2ndly Gunpla are the best kits i have ever touched each mini piece fits flawlessly together and fully articulated for dioramas and there are gundam builder tournament
@_gungrave_6802
@_gungrave_6802 21 сағат бұрын
Its his accent that makes it sound odd.
@KisekiFan
@KisekiFan 3 күн бұрын
MGEX Strike Freedom as his 1st gunpla build, that is some impressive choice, its considered the best kit and with the most parts, i think you can give PG RX-78-2 Unleashed a go. oh btw while its spelled as Gundam its actually pronounced as Gundum. 😂
@joeji7442
@joeji7442 3 күн бұрын
Was the biggest surprise coming from Warhammer the fact that other model companies don't try to rip you off?
@_gungrave_6802
@_gungrave_6802 21 сағат бұрын
Bandai does some sketchy pricing on kits now and then. They charge hundreds for PG and MG kits for what amounts to probably less than $40 worth of plastic.
@Exaris79
@Exaris79 3 күн бұрын
See if you can find the Dragon Momoko/MJH Metal Build Strike Freedom with all of its beam effects.
@Thenewbagman
@Thenewbagman 3 күн бұрын
The only thing that ever baffles me when building Bandai model kits is to notice how much more expensive are my Warhammer miniatures in comparison
@_gungrave_6802
@_gungrave_6802 21 сағат бұрын
Buy their HG or SD kits which are on par with a lot of Warhammer stuff but offer a MUCH better value for roughly the same price. You only buy the RG, MG, PG, MS ones if you start to get really deep into the gunpla hobby or you're a big fan of a specific Gundam anime/mecha.
@GunplaShock
@GunplaShock 3 күн бұрын
The fact MGEX kit for your first kit is insane! Good on you man!
@KanohiHau0000FF
@KanohiHau0000FF 3 күн бұрын
Seeing a Gundam holding a rifle like a rifle is simultaneously cursed and satisfying
@markreinoso1129
@markreinoso1129 3 күн бұрын
Awesome work in having built that kit. And an MGEX at that.