Santi Luib III - SL3 Simulations

Пікірлер

@jpnsimulations Күн бұрын

good afternoon Santi I'm trying to print the files ALT_Knob_Case_Oter_part_4 and ALT_Knob_Case_Inner_part_4 and there is a problem with the models. how to solve?

@Pe11ePD 6 күн бұрын

Amazing mod! Shame there is no my country so I can't order!

@SpeedChecked 7 күн бұрын

Hello. Thanks for the video. If I am using your Kory Switches, where the output LEDS have a common ground with the integrated buttons. How could I make it work with a LED driver ? The LEDs in the overhead panel wired from the Korys to the LED driver with the ground pin of each korry also ... Would the one ground connection coming through the LED driver into the Arduino WORK for the input ( Button PIN ) connection direct to the same Arduino board ? Sorry but my electronic circuits knowledge is limited.

@santiagoluib3 7 күн бұрын

Hi. If you use 74HC595 as your LED driver I think you should be fine as the LEDs on the Korry use common GND. Best is if you could simulate this on bread board, ie. LED with resistor and common GND and Data Pin that goes to a pin on the driver.

@HazmatFire59 18 күн бұрын

I don’t have a 3d printer, will you have them in stock soon again 😊

@santiagoluib3 18 күн бұрын

Hi, we just got the parts stocks! 😊

@HazmatFire59 18 күн бұрын

@@santiagoluib3yeah i just saw that, unfortunately, the shipping is 2x the cost of the mods 😢 i will pass

@santiagoluib3 18 күн бұрын

No problem . Unfortunately the shipping has always been the drawback from where I am in the world. Cheers

@johnb6014 20 күн бұрын

Hey Santi, do you have a link to the two resistors you use?

@santiagoluib3 19 күн бұрын

Hi John, you can buy these resistors from any online vendors :) But I think the Asian online shop I got it from may not work in your region if you are in the USA, UK or EUR (it's called Shopee dot ph). I send you one from Aliexpress instead, which caters to everyone no matter where in the world: www.aliexpress.com/item/3256801456365227.html?spm=a2g0o.productlist.main.1.7c902dbdPKjkzL&algo_pvid=a8bdd727-a01b-44b5-bb1c-0101a92ab40e&algo_exp_id=a8bdd727-a01b-44b5-bb1c-0101a92ab40e-0&pdp_npi=4%40dis%21USD%210.29%210.26%21%21%210.29%210.26%21%402140f54217368189628242277ecf38%2112000016948599306%21sea%21US%214547369273%21X&curPageLogUid=2M35JkxkCxdt&utparam-url=scene%3Asearch%7Cquery_from%3A

@Glasairman 21 күн бұрын

My 3D guy delivered today, he uses PLA CF (in German Kohlefaserverstärkt), no sanding and as smooth as a baby's bum. Just waiting for Mr. Ali E. to do his thing

@santiagoluib3 21 күн бұрын

Nice@@Glasairman does he have the brand of the filament?

@hoimi2809 27 күн бұрын

You know the translicent from the acrylic?

@santiagoluib3 26 күн бұрын

it's a 2mm semi-transparent or "opal white" acrylic as it is sometimes called :)

27 күн бұрын

Hi, Santi, your work is absolutely great stuff, which increases the immersion drastically. I love your stuff, so I ordered the complete set of mods for the Throttle Quadrant. Now, my question is, will I automatically receive Mark II of the Flaps mod? Thanks so much again for the great work you do.

@santiagoluib3 27 күн бұрын

Hi, thank you for the kind words and the support. Yes, the flaps mod is default to Mark II :)

27 күн бұрын

@@santiagoluib3great to hear, looking forward to the delivery!

@Gaspard1111 29 күн бұрын

These are really cool, i was looking forward to buy them, but i saw 2.500PHP delivery fees, that's huge...

@gregpruitt1647 Ай бұрын

Impressive amount of design know-how applied here. The level of detail flight simers will go through is amazing.

@ZenMotionSim Ай бұрын

you could have done like an adaptor to reuse the original knob - a printout that woul go into the knob and then into the 9mm tube

@flightsimulatorvietnam8593 Ай бұрын

Sorry sir, you can share Drive with model ? i need it. but i from VietNam i can;t order thank you sir

@keithryant5779 Ай бұрын

These are the nicest diy korry switches I have seen yet. Thanks for sharing! I do have a question. For the overhead panel, are you using a single power supply to power the whole overhead panel lighting? If so, how large/amps are needed for the overhead panel?

@TheKairuzSAdvance Ай бұрын

You can turn on ironing settings in your printer so you have a better finish in the front of the button (if you print it from the front face, I recommend you to turn down line width 0.02 mm from the size of your nozzle, that will also give you a better finish)

@davidealessi7181 Ай бұрын

I just bought the files for this mod but regarding svg file, the online service I'll use to make the laser cut told me that object would measure about 2,5 meters. Can you please help me? They need a .dwg file. Thank you!

@santiagoluib3 Ай бұрын

hi david, please email me at [email protected] :) Thanks!

@QCAlex4 Ай бұрын

Hi Santiago, I'd like to buy your kit but you are out of stock. Also, do you ship to canada?

@santiagoluib3 Ай бұрын

Hi Alex, thank you for your interest. Parts stocks will arrive on estimate in the next 8 days or so. You may check the store after that period. And yes, I ship to Canada :)

@QCAlex4 Ай бұрын

@santiagoluib3 Cool, I'll check this for sure.

@QCAlex4 16 күн бұрын

Hi Santiago, January 16th now and you still out of stock 🤔🤷‍♂️. Do you have any ETA for stock availability ?

@santiagoluib3 16 күн бұрын

@@QCAlex4 Huh?! it's back on stock. :)

@QCAlex4 16 күн бұрын

@@santiagoluib3 oh cool, it wasn't when I've chrck couples of days ago 😊 I'm buying it right now! Thanks.

@IngeBall Ай бұрын

Very satisfying "click/snap" when you locked the PCB in place ☺

@Cooper_013 Ай бұрын

when ordering this from your shop, are we buying a full set for the a320? or buying the plans for it? when i saw the price of $7.68 USD, i thought it was the plans, but then it wants 60$ USD for shipping....

@santiagoluib3 Ай бұрын

Hi @Cooper_013. Shipping cost is always a pain in the neck from where I am in the world and I wish I could do something about it :( So when people buy Kory buttons from me, they do it in bulk numbers, say 20, 30, 50, or the whole overhead panel. That $60 (to where you are) is a minimum, be it 1 Korry or a bunch up to 1kg which (i think) pretty much covers the entire overhead panel set of korrys. I hope that clarifies the confusion :) I do sell the parts for DIY assembly, not sorry not the blueprints/files.

@Cooper_013 Ай бұрын

Would you be willing to work something out so that I can print them myself? I’ll even sign something legally binding that I won’t sell them. They are only for me to use. Been looking at the mantoga ones, but they won’t work for my panels I made. Where as yours actually would.

@thecow76 Ай бұрын

Nice! What paint do you use to coat the switches?

@santiagoluib3 Ай бұрын

Hi, I use polyurethane 1k automotive paints. The lens receive matte black film then applied with flat clear coat.

@bradybrother100 Ай бұрын

I have been trying to reproduce the contrast difference on the light labels and your method using Tint looks awesome! Do you have the link to where you purchased them from?

@Armagedon_13 Ай бұрын

Maybe can be added more buttons and stuff but you need to change the code of the stm32 and try to find a free output or add a new mc to share the data or a mux

@NikonCrayzee Ай бұрын

at 46 seconds into the video, you show a circuit diagram for the Korry assembly. I can see that you've chosen a common anode configuration. You mention in your video that different LEDs have differing brightness requirements (controlled indirectly by individually chosen resistances). Is that the reason you chose common anode? The advantage here would be supply a common voltage of say +5V and then ground each LED that you wanted lit up. Normally, designers use common cathode as its more easy to control the individual voltages to each LED and therefore control the brightness (but keep resistors the same value for any colour). It would be nice to know what your design philosophy was at the time.

@santiagoluib3 Ай бұрын

Hi! Good catch there. I was just having a discussion regarding the same topic at a home cockpit builders group in FB . The diagram in the video is not a 100% representative of the actual circuit. The LEDs there are flipped. And you are right they should be common cathode. I picked that clip randomly to fill the video but it was a very early stage version of the design and must not be used as the actual schematic. To those taking that schematic, just flip your resistors to be common cathode. Also, the representation of the LEDs there is just a placeholder for the PCB for me to mount the actual THT resistors of my choice. For LED intensities, I find 47-50ohms are the right resistance for the Yellows and Reds. For Clear and Greens, I use 220-250ohms. And that is because I find these LEDs to have varying intensities depending on color. I hope that helps and sorry for the confusion. :)

@NikonCrayzee Ай бұрын

@@santiagoluib3 No apologies necessary at all - this whole thing is one big learning curve, some of us are at a slightly steeper end of the curve as opposed to someone such as yourself who has allready done the hard yards and is no on a far gentler slope 😄. Yes I did also notice that both your LEDs were reverse biased, but ignore that as I wanted to understand your design philosophy. Thanks for clarifying. Funnily enough though, in the case of PLC signalling, most inputs from the field are negative logic (or earth seeking). Negative logic provides for some level of failsafe design, though it comes at a slight cost of complexity in terms of understanding/implementation. For DIY cockpits, I'm all for positive logic.

@agile823 2 ай бұрын

A 4-year old thief came and stole my original parking brake lever. Thanks for the mod. I just order it!

@johnb6014 2 ай бұрын

Hey Santi. What Laser do you have? K40?

@shubbaibrahim223 2 ай бұрын

Hi thanks you so much for the effort . I made a pcb like the one in video can you just explain how do you connect it to arduino/mobiflight

@santiagoluib3 2 ай бұрын

Hi, that's cool! Connection to Arduino is basically two output (LED), 1 button and common Ground. Mobiflight has presets for the most common functions of most aircraft, so you can just select the preset that represents the button/led of your choice aircraft. If you can email me we can further discuss details on how to connect it to arduino and mobiflight. :)

@shubbaibrahim223 2 ай бұрын

Thanks a lot for your reply So the 4 pins are 1 ground 2 led+ 3 button 4 led + Correct? How can I email you pls?

@shubbaibrahim223 2 ай бұрын

I replicated same board as ur video but your board common the +and not the - . Am I missing anything ?

@ready4taxi 2 ай бұрын

Does this mod have downloadable files?

@santiagoluib3 2 ай бұрын

Hi, I am sorry it doesn't have downloadable files.

@ready4taxi 2 ай бұрын

@santiagoluib3 would you be able to share the 3d printable files? Would be nice to also get them for the parking brake mod.

@Kreska0 2 ай бұрын

Please, please release the version of it that keeps the original settings, especially now when msfs 2024 was released and it's not allowing the proper configuration. I absolutely hate the original feel of it.

@santiagoluib3 2 ай бұрын

Sorry I don't quite understand what you mean. By "original settings" , do you mean the original detent positions?

@Kreska0 2 ай бұрын

@santiagoluib3 hi, yes the original detent position. Is it available for "special order"?

@santiagoluib3 2 ай бұрын

Hi , in that case you don't need this mod 😊 The very idea behind this kit is to move the positions to be more realistic. In your case Just tighten up the tension adjuster at the front of the unit.

@Kreska0 2 ай бұрын

@@santiagoluib3 it's about the feel of it, tightening the screw still makes the whole thing feels too loose.

@ForzaHorizonRealisticCrash-c8p 2 ай бұрын

does i work with xbox?

@santiagoluib3 2 ай бұрын

Sorry it doesn't.

@maxpinzasub 2 ай бұрын

Complimenti per i tuoi bellissimi lavori. I tuo Korry si possono acquistare già pronti ,oppure bisogna montare tutti i pezzi? Grazie

@santiagoluib3 2 ай бұрын

Hi max, you can either purchase them pre-assembled and ready to use, or you can also buy the parts so you can assemble them yourself. For more details, you can email me at [email protected] to discuss more options. Cheers!

@fsj197811 2 ай бұрын

Well done, thanks for sharing.

@muhammadhosseindoustipour3635 2 ай бұрын

How can I find the button stl files? is there any where I can download them and do with my own printer?

@johnb6014 Ай бұрын

He doesn't release the stl files anymore.

@marcalleaume 2 ай бұрын

Hi i have been checking the JLCPCB website but i do not know the exact reference of the correct pcb to order. could you give me the reference to look at please.

@babybearmc1205 2 ай бұрын

Do you think it could be possible to 3dprint the locking part it will make it much more accessible for people who can’t get there hands if acrylic

@clay_wear8015 2 ай бұрын

did you find a solution?

@afa2127 2 ай бұрын

nice work, how did you program each light to behave like the one in the sim

@laxtjt 2 ай бұрын

Very cool modification and a helpful video! One question I have is how did you remove the gear switch from the circuit board? My gear handle broke off and I want to remove and replace the switch from the circuit board with a new one. thank you!!

@justinrimsch9968 3 ай бұрын

hey how did you manage to make the 3d printed parts move so smoothly? For me it is either so tight that hardly anything can move or so loose that the parts get stuck due to the slight rotation when I experiment with the tolerance

@danielclark3658 3 ай бұрын

Does the switch come with the kit if ordered from your website?

@santiagoluib3 3 ай бұрын

Hi Daniel, If you order the physical kit, the switch comes with it. For the downloadable version, you have to buy the switch 😊 I hope that helps.

@VVardyyy 3 ай бұрын

Hello, may i ask how do you get the labels done? I work in simulator maintenance and we require a bit of craft to fix these labels on multiple switches. Would appreciate any help. Thanks

@santiagoluib3 3 ай бұрын

Hi @VVardyyy, I use 2mm translucent white acrylic, painted with flat black. Then with a CO2 laser, engrave them with the markings. Apply matte black light tint on top of the markings, and then spray with flat clear coat. I hope this helps. If you need more details, pls drop me an email at [email protected]

@supakchairider9675 3 ай бұрын

I visited your website and I would like to order but seem you not ship to Thailand. Dose it possible to ship to Thailand?

@santiagoluib3 3 ай бұрын

Hi @supakchairider9675, sorry about that. I'm having problems trying to add Thailand (and a few other countries) in my store app. But I do ship to Thailand. Just drop me an email at [email protected] :) I hope that helps.

@kenknowles51 3 ай бұрын

Just a word of caution - I originally positioned the arm switch as shown (disarm = closed) but instead of wiring it into the gear or autobrake, passed it through to the right side “fire warning” / black button on the throttle (I was already using the left button for something). This caused two problems. 1) This button specifically is used to put the controller in hardware calibration mode if it is held down when connected to USB - so it means that with the spoilers disarmed the button was effectively held down anytime I turned on the PC which messed up my axis calibrations for the thrust levers (thought I’d broken them😅 until I found out what happened). 2) it meant that the mapping in FS2020 required disarm to be on-press and arm to be on-release. This made it impossible to deploy the spoilers in flight as the disarm was constantly pressed returning them to retracted position (made the flap handle in the fenix go crazy). Solution was to re-orient the switch so that disarm = switch open and don’t wire to the right side black button, only the left side! Great mod though, really recommend it!!

@xxfranek 3 ай бұрын

can i order to poland at ur site?

@santiagoluib3 3 ай бұрын

Hi @xxfranek, For some reasons I still can't add Poland (and a few other countries) in my store app as a destination, but if you wish to order, you may email me directly at [email protected] :) Hope that helps.

@WU3Shamradio 3 ай бұрын

I bought the files from your store and had an acrylic service cut the plates and brackets for me and sourced the ball grub screws from amazon. Fantastic MOD! I love it!!😁😁😁

@jasmenter 3 ай бұрын

Nice work mate.

@SimPilot-dl8zy 3 ай бұрын

Do you have a link to the black headlight tint plastic? I have been searching but have not been able to find it.

@ralfenter2731 3 ай бұрын

Got this mod today an for me its the best Throttlemod so far! The feeling of the Thottle detends are great. All Parts fits well and its easy to install. Thank you for this andfor the really fair price.

@ajaykamath1853 3 ай бұрын

Top notch work as usual and thanks for your contributions to the sim world. I am in the process of designing and manufacturing my flaps, spoliers and landing gear levers. I'm making these parts primarily out if aluminium, brass (gears) and stainless steel. Unfortunately, due to some parts requiring lathe work, its not for your average garage workshop hobbyist. I too do not have a lathe, but am getting those specific parts made by an external workshop. I plan to build this design using my 3D printer, but the rotary parts where youve suggested at least 40-50% infill, i will get a workshop to make them from aluminum using a lathe. Not sure how they'd machine the oart with the square hole though 😢

@santiagoluib3 3 ай бұрын

Instead of a Lathe machine which is intended primarily for cylindrical objects, why not look for metal CNC machines? They can surely make one, but at a cost. You may also try JLCPCB to CNC this for you. Just out of curiosity, why would you need the assembly to be made of metal? You can leave the knob housing with PLA and instead have the knob handles in metal uisng lathe machine. Just my .2 cents 😊😊

@ajaykamath1853 3 ай бұрын

@@santiagoluib3 😄 you're .2 cents is worth a lot given the excellent designs you've come up with. I'll give it a rethink and respond

@ajaykamath1853 3 ай бұрын

@@santiagoluib3 @santiagoluib3 I've had a look at JLCPCB and it's quite good as a service, certainly cheaper than in Australia. The intentions are to use a metal lathe for cylindrical objects. I don't intend making all the parts out of metal, just the parts that need strength. The casing will be 3D printed from ABS (it's more rigid and has better machinability - basically drilling or tapping). The knob handles as well would be 3D printed, then I will rough sand, apply a metal body filler, wet fine sand and then dip in an enamel paint to give it that beautiful smooth look and feel. I'm doing this process for all the knobs for the spoilers, flaps and landing gear.

@XxSwazedxX 3 ай бұрын

please

@mike2636 3 ай бұрын

Hello, would it be possible to tell me what blue/gray are you using for the panels. Thanks.

@santiagoluib3 3 ай бұрын

Hi Mike, I have my color custom mixed in a local paint lab. We basically brought a Java Simulation FCU-EFIS and have them copy the color. :) It is very close to the airbus RAL 7031 (RGB = 91,103,109) but its a tad bluer. Hope that helps.

@XxSwazedxX 3 ай бұрын

hi im planning on making my own cockpit please could you send me the slt files and the circuit board files if that is possible

@Shyobe 3 ай бұрын

Please sell these

@santiagoluib3 3 ай бұрын

Yes we do. Please visit the store at santiluib3.com :)

@Shyobe 3 ай бұрын

@@santiagoluib3 how would install them a

Ең жақсы KZbin

Пікірлер