I've seen enough ammo failures from this company to steer clear.

Fireball 😮 Too bad Thanks for the video

Compared to Tela Impex?

Good video dude - keep it up!

I am an RC2 and Four prong only person, but it is very educational to learn about what else is out there! Thanks!

I’ve now shot roughly 500 rounds of the Soviet Arms 122 grain FMJ ammunition. One purchase was when it first came out and it was in the 250 round ammo can. The second purchase was as individual 20 round boxes. I had similar results with both purchases and all 3 of my guns love it (M70, KR-103, SA GF3). Groupings have all held fine out to 100 and 200 yards, though I have no data to present from my experience. No failures of any kind and I’ve used 4 different magazine manufacturers. I will continue purchasing this ammunition as a way to invest in American Manufacturing. Is it gold, no, but it functions just fine and I assume they will continue to make improvements. My two cents isn’t worth a penny, but I thought I’d share. Thank you for all the videos you’ve provided us!

Very thorough!

Thanks for this, not a lot of info on this.

I know im comparing apples to oranges, but in terms of PSA's track record, I've have nothing but good experiences. I got their M110 clone, only ever 2 malfunctions from improperly tuned gas block (2 clicks over fixed it, and it was the first time i fired it). Their 168gr .308 OTM was grouping in the rifle at 1-1.5 MOA at 100 yards and had more consistency than the Federal Gold Medal match of the same spec using SMK bullets. Another thing to note is that all of the OTM ammo I've purchased from PSA has had a lot more consistency with the hollow point geometry, having less off center cuts and less rounds with visually damaged tips. So, from my experience, no issues. The rest of their stuff, no idea though, but their .308 works.

Is your hat the Mobile Infantry hat from Starship Troopers?

This is a fantastic video. Very informative and high-quality

Was the ammo corrosive at all to your gun? If I bought some of this ammo (750 rounds) oils it be a good I’d es to flush it with water and then oil/ clean it after each shooting?

You definitely need a good quality flash hider that won’t change your point of impact your gun shot way better without the one you started with

Im no fan of PSA and wouldn't buy this ammo. I have had nothing but bad experiences with PSA stuff. I just built my AKs off 556 WBP parts and galil sar kits. Not sure why so much hate towards 556 AKs , mine run just as good as my 7.62 AKs. I reload my ammo and get my stuff dialed in before i bulk load.

Great information. I'd like to see a video like this with New Republic x39 ammo bc i shoot it a lot c:

3-5 MOA? Acceptable for an AK. You always want better but AKs gonna AK. Still basically able to hold on a full size silhouette out to 300ish.

Why are you excluding flyers?

You are insanely good at providing every little detail of information to analyze ammo, ive never seen anyone do it like this You deserve a hell of a lot more subs and views

I found one box of this AAC ammo that feels significantly lighter than all the other boxes of it I have. I want to get my scale out and see how different it actually is but I haven't gotten around to it yet. It's so light I'm wondering if there's even powder in there 😂 I've shot a few other boxes of this stuff and it seemed fine. For the price I'll keep using it!

I bought 400 rounds the day it first came out. 34 rounds in had a case separation at the neck...

It’s sad that although I want to buy this, given PSAs track record for quality, I’ll purchase Azerbaijani Tela ammo instead lol.

I chrono'd an older batch of AAC 77gr SMK yesterday with a garmin chrono. I got an SD of 179.2 with 10 shots. On the high end I was hitting 2850ish with a 12.5" barrel and on the low end I hit 2490ish.

another quality video

It looks like they’re cleaning things up a bit since I tested it. The batch I had made Tula look good in every aspect. Glad to see. Great video!

I think its time you had that rifle rebarreled. Its performance for groups has been awful since I started viewing the channel.

Actually looking for Rail to replace the HKey Slim.. but can’t decide to go with Geissele mlok or B&T.. especially because of colors to match the RAL. What’s your preference between your Handguards?

When you close the stock hold the button down to extend the longevity of that hinge. Otherwise it might start folding on you just from getting hit lightly.

I have the real and original G95k Parts, are you interessed?

I use mine when I go hunting and camping, especially in fall and winter. Or really when I do anything outside in winter. The wool ones are nice and warm. In the summer, I use a cotton one. I've bought mine from Amazon, from various manufacturers, some are good and some are pretty bad. Yeah the peak on my wool m43 stands out more than it should, but it's fine. Still the most comfortable hat I've ever worn.

You shouldn't have over 2 inch grouping at a 100 yd either is the barrel or a bad ammohave you thought about using zmac's engine additive when the barrel was hot pour down the barrel while you're letting are you kicking back for a minute let it get on the boat the receiver area what have you give it a minute wipe it all down what the Z max penetrate the metal

ive seen it said that certain(ar15) triggers will not work with the hk416/mr556 uppers....ive been running the ALG defense trigger, but wanting to go with like a 2-stage Geissele, but not sure about compatibility-thoughts?

Stumbled on your AK content. Love your work, subscribed.

What exactly is the top? Is there a combat shirt, too? Cool niche camo.

This is my first time seeing that grip and I just ordered one immediately! Thank you! Going to subscribe now.

I just got the Recessed Night Howler and apparently Wolfpacks muzzle devices are only compatible with their mount. I have the Rearden Atlas mount on my can and it doesn't lock up nearly as tight as the rearden muzzle devices. From what I found out , Wolfpack uses a 24° taper when the Plan B's like Rearden are 25°... They are supposedly fixing this issue, I just haven't reached out to them yet...

Reardon recommends against using wolfpack muzzle devices since they use a 24° taper instead of the 25° spec.

I asked CAT about this. They do not recommend using mounts like this paired with flash hiders due to severely cutting down the distance to the blast baffle. It will probably be ok but just be aware you are decreasing performance and probably introducing more stress to the blast baffle. I would use the reared minimalist muzzle device if you want to you use a low profile hub mount.

Curious about your 416/mr556 upper. Did you go with an adjustable gas block? I was really considering a current production mr556 but the gassing while suppressed was a deal breaker for me. Was i wrong?

Kinda curious what your day job is (would totally get it if you don't wanna say), but I feel like with your demeanor and the way you explain things you'd make a good teacher.

I would not use the Rearden 13/16ths crowsfoot wrench. It's only 3/8ths drive for one thing and its only .2500" thick which is great SOMETIMES but for installation it sucks. It slips easily and can be deformed very easily too. Mine is no longer in specc and I only torque to 30ft/lbs. The rearden wrench sucks. I actually prefer FCD Plan B mounts for this reason alone. The FCD Plan B mounts use 3/4ths wrench flats which is just more robust imo. I use the FCD armorers wrench. Plus, 3/4th" flats are what most other muzzle devices use so if you already have an armorers wrench for say...surefire muzzle devices or whatever then you won't need a new tool.

Take a look at the Revival Defense/FCD rearden compatible devices. I have their A2 style as well as their 4 prong. Both are extremely good at flash mitigation. 4 prong is on an 11" Bren 2 and the A2 on a Galil Ace 16" both 5.56

I got some of this ammo and with my Zastava m70 i was able to get 2 moa at 100 yards with a 3x primary arms microprism. Using the same ammo on the same day eith my arsenal sam7f-62 i got about 4-5 moa with the same microprism. Different aks definitely like different ammo. I get generally poor accuracy with brass norma. I was happy with this stuff. It definitely had more recoil than the brass norma too.

Really like paint color setup gives depth to white on tan brown like teture would do with urethane looks great.

How do you like the RMR HD so far? picking an optic to ship with my P30L

I know it’s going for the SDMR however that small of an optic looks odd to me

Have an 11" MR223A3. Great rifle. If I could change anything, it would be a lighter 416a5 barrel and the A5 adjustable gasblock. Otherwise it's pretty much perfect.

I wish you reviewed every product im thinking about buying.

id still use the ambi mag release. id just file it down untill it stuck out exactly where i wanted it!

Funny you said that comment about the flashhider. I eventually called HK and they were willing and able to remove the flash hider off. total turn around was less than a week

damn how do you afford all this drip