Пікірлер
@marioflores5985 2 күн бұрын
Was touch and go about using a screwdriver. Once the keyhole made a full turn it still wouldn't pop. Put a rag between paint and flat head and popped it up. Thanks.
@GiantAntCowboy 2 күн бұрын
@@marioflores5985 phew, surgery successful, nice! Happy to help, cheers!
@notice_fpv 5 күн бұрын
That's it. I'm bailing on dji..... While it's still worth something. :)
@GiantAntCowboy 5 күн бұрын
@@notice_fpv Haha! Definitely Pros & Cons between the systems. Which is best depends on your uses for sure.
@thesouthwestern 6 күн бұрын
Why did you change your design spacing from 10.4 to 12? Wasn't 10,4 more accurate?
@GiantAntCowboy 6 күн бұрын
@@thesouthwestern did I saw 12mm somewhere? My most recent builds use approximately 10.4mm spacing. Let me know, appreciate the comment!
@thesouthwestern 6 күн бұрын
@@GiantAntCowboy Your thingy-verse model is set to 12 mm. So I just wanted to know before I print if it was a mistake, or if the 10.4 was the mistake. I will just shrink it, thanks.
@undeze 7 күн бұрын
Haha. Bugger. Buy an ice axe maybe. Good on you for pushing it though 👍
@GiantAntCowboy 7 күн бұрын
@@undeze haha yea, didn’t really have time for this hike, and definitely didn’t have time for injury… I can see this location from my house, and have been thinking about going up again with the last know GPS coordinates I pull from the logs. Obviously it’ll be pretty worthless at this point, but still fun to find!
@notice_fpv 8 күн бұрын
Don't they need to be in the same video mode? Honestly asking... Range goes up as resolution goes down (*I think).
@GiantAntCowboy 8 күн бұрын
@@notice_fpv yea, you’re 100% right. HDZero 1080p30 mode is less stable than the other modes. Here’s another video where I tested all the HDZero modes through the Gantlet. kzbin.info/www/bejne/nGnNaYGHfN56qaM Did like 30+ runs, haha! Which system do you fly?
@notice_fpv 8 күн бұрын
@@GiantAntCowboy I've got DJI, but been flying HDZ (hence leaping to it's defense) as well as analog. Where can I find the Quad Rescue video (next in the series)?
@GiantAntCowboy 8 күн бұрын
@@notice_fpv Here’s the quad “search & rescue” video: (kzbin.info/www/bejne/j4KnXqR-acycr6c) it turned into quite the hike. Great time! As far as image & penetration DJI wins hands down in my experience. Here’s my latest video doing some antenna testing with DJI O3, (kzbin.info/www/bejne/j5vYea2qbK9mjKc) and even with basic antennas it outperforms the other systems. Very impressive!
@0baakFPV 9 күн бұрын
only 7-8 minutes? I see li-ion builds on youtube that get 20-30 or more, why is this one so low?
@GiantAntCowboy 9 күн бұрын
@@0baakFPV with my latest 6s2p builds I’m getting much better flight times. Here’s the updated test which compares 18650 vs 21700 6s2p packs. (Long Range FPV Battery Testing DJI | 30+ Minute Flight Time | 18650 vs. 21700 Li-Ion Packs 6s2p DIY kzbin.info/www/bejne/e5S4dJeFqN95b7c) These ones are awesome!
@0baakFPV 9 күн бұрын
@@GiantAntCowboy sweet man watching now thanks for the reply
@JuicySmullietFPV 9 күн бұрын
Do you have a video making the 6s2p setup? Or any recommended video. I have followed FalconRads video to make single packs but I’d like to make a 2p also so I can have no huge pack instead of having to parallel them.
@GiantAntCowboy 9 күн бұрын
@@JuicySmullietFPV yea, proper 6s2p packs are great. I don’t have a build video, but if you re-watch @0:54 I show a couple build pictures of my 2p pack. You can see I made the wire a square for connecting the inner cells which works great and should ensure current flows evenly through all cells. I used solid copper for fun (curiosity) but regular stranded copper is probably a better choice, and it’s insulated. Anyway hope that’s helpful, happy to answer questions, cheers!
@JuicySmullietFPV 9 күн бұрын
@@GiantAntCowboy I’ve got to figure out the configuration. 1p is easy, negative to positive… but 2p, I don’t quite get that one yet.
@GiantAntCowboy 9 күн бұрын
@@JuicySmullietFPV it’s really the same as a 1p build but each cell is now two cells. So start by taping cells together in pairs, then pretend they are a single cell. Contact me on Facebook GiantAntCowboy, and I can share some pictures.
@farisnazeri9841 10 күн бұрын
Hello sir , are u doing new long-range walksnail kit ? i am eager to watch the review from u
@GiantAntCowboy 9 күн бұрын
@@farisnazeri9841 thanks, appreciate the support. If WalkSnail wants to send me a setup I’ll test it. I’ll reach out to them. However feel free to send them a message too, it always helps when others recommend my channel. I’m certainly interested to see how higher power performs in these tests!
@Itsvyzbzx6r 12 күн бұрын
Thanks man just did this on my 08 ZX6R life saver
@GiantAntCowboy 12 күн бұрын
@@Itsvyzbzx6r glad to hear, cheers!
@DroneVisionIT 15 күн бұрын
Great range!!! With two directive antennas (patch+helical) on the VRX and an Albatros long on the VTX I can barely get to 2.7km with a lot of interference :( even with 1.6w of power.. do you have any advice for me?
@GiantAntCowboy 14 күн бұрын
@@DroneVisionIT well, you must have clear line of sight (LOS); meaning nothing (trees, building, power lines) between you and the drone. If you have clear LOS, try different channels, generally VTXs output the most power on lower channels like “R1” and the least power on higher channels like “R8”. So I always use “R1”. Antennas are sensitive, if you’ve ever crashed the quad the Albatross might not work as well as it should, and if you’re using a UFL to SMA Pigtail connector those fail often. Try replacing both. Which VTX/VRX are you using? Do you have any DVR footage to share?
@DroneVisionIT 14 күн бұрын
@@GiantAntCowboy I had a clear line of sight :( you can see It in my last video.. i dont know what to do..
@dstario 15 күн бұрын
man, just wanted to extend my gratitude to you, that flathead screwdriver trick did the job.
@GiantAntCowboy 14 күн бұрын
@@dstario thanks glad to hear it worked for you!
@exsoldier2012 15 күн бұрын
i had problem yesterday i spent 3 hours and nothing today morning i saw your video -5 minytes job done thank you .any idea how to avoid again problem in the future
@GiantAntCowboy 10 күн бұрын
That’s awesome, happy to help. Lubricating the lock, especially before storage would probably help. It seems like the aluminum is oxidizing, so any light oil coating would help reduce the issue.
@fyzobaba 15 күн бұрын
It's twitchy cos u not used to the stock rate. U have to turn down the rate , add more expo, and turn down the center sensivity. Stock is 160 for sensitivity, 460 for rate, and 0.54 for expo. Try this 100, 300 and 0.6 for pitch , yaw and roll.
@GiantAntCowboy 15 күн бұрын
@@fyzobaba Appreciate the advice, but i think it’s just normal behavior in Normal or Sport modes; just the quad over-correcting to stop itself & hover. I’ve flown three different DJI FPVs now and they all do the same thing. In Manual mode they fly fine, no twitching, handles more like a standard FPV quad. For reference I’ve been flying FPV quads for 5 years so I’m very familiar with rates, expo, tuning ect. I have a dozen FPV quads, but really like this one for checking out things around the property. I can literally sit on my couch and fly around most my farm, amazing! I did a couple follow up videos talking more about my experience, (kzbin.info/www/bejne/fpnMiWyKipx5mZY) and actually lost this one in a mountain during a test, haha! Check those video out of curious, cheers!
@fyzobaba 15 күн бұрын
@@GiantAntCowboy nice one .
@SeeFPv-qm6ie 16 күн бұрын
I made the switch from dji since there gonna be banned soon😂
@GiantAntCowboy 16 күн бұрын
@@SeeFPv-qm6ie I’ve also been flying DJI O3 lately. Got a good deal on V2 Goggles. Really impressed with the range & penetration performance. Did you see my latest DJI Test video?
@Braincho 19 күн бұрын
Would like to ask for best diameter and thickness of the reflector and the copper wire please?
@GiantAntCowboy 18 күн бұрын
@@Braincho somewhere between 52-56mm is ideal, I’ve gone larger as well with good results. Largest diameter creates bigger side lobes in the signal radiation pattern. For wire I always use solid copper “Romex Type NM-B Copper Building Wire”, it’s available at most hardware stores and 1m contains 3 or 4 wires enough for several antenna builds. I don’t remember the exact wire diameter, but it’s pretty standard. Has to be solid though.
@Magneticitist 21 күн бұрын
It's odd to see the iflight combo working better than the TrueRC at times as the TrueRC patches are definitely superior.
@GiantAntCowboy 20 күн бұрын
Yea, “take it with a grain of salt”. There were some variables that may have affected the results. All the antennas I used were Linear or LHCP, but since the X2-Airs are RHCP I had to use a different set of Helicals & Omni antennas which were connected using UFL-SMA connectors. So these variables could have created performance issues, however as mentioned i did have similar glitches in my original HDZero tests years ago. This X2-Air setup did perform the best through the gantlet though. It’s hard to do perfect tests with all these variables. Thanks for watching, appreciate the comment. Cheers!
@eminyesillie122 21 күн бұрын
I'm excitedly looking forward for the new video. Thank you for the effort you put into the FPV community.
@GiantAntCowboy 21 күн бұрын
@@eminyesillie122 thanks! I really appreciate the support from everyone and will keep trying to produce quality videos!
@ByronBrownSydney 22 күн бұрын
I did this once spent 3 days looking for mine in intense bush behind my house - thing just starting emergency landing - that's a big mountain to climb
@GiantAntCowboy 22 күн бұрын
@@ByronBrownSydney yea, I felt like the battery should have gotten me home. In more recent tests I’ve found you can actually push the emergency landing quite far, but in my case I accidentally disarmed… dumb. Oh well, live & learn! Good exercise 🏔️ 😄
@resort4994 24 күн бұрын
Try connect Alientech antenna to the googles and do some test
@GiantAntCowboy 24 күн бұрын
I don’t see any Alientech antennas for the O3 system. Can you provide more info?
@BrandonBeans 25 күн бұрын
Did I miss the control setup? The one with stock DJI v2 antennas on the goggles all the way around and the stock o3 antenna on the drone... Thats how I do ALL my LR now and I don't need to worry about turning my head to aim for signal. With MIMO we can have gain through beamforming, and when we swap to antennas that don't take advantage of that we have to rely on the antenna gain by itself (no MIMO gain!). When using stock v2 antenna, the best drone antenna I found is the long FlyfishRC o3 antenna.... Also, food for thought: I was just flying tandem with a buddy with patches and true rc stubbies on the goggles and long truerc sma antennas on the o3 in the drone and when he had signal issues a few km out I had perfect video. he lost video and had to ascend, while I was just following him up wondering whats wrong 😂
@GiantAntCowboy 24 күн бұрын
You’re basically saying that using Linear antennas allows the system to use multipathing, or bouncing signals to strengthen the signal. While using CP antennas eliminates the ability to use these bouncing signals? I would think this would be more useful in a parking garage or bando situation than in long-range where higher gain directional antennas should perform better. (Though theoretically directional linear antenna would be best). In my tests my high-gain CP antenna setups seemed to perform better. Regarding your buddy’s setup, I wonder if he wasn’t aiming his patches well, or if there was just a general issue with his setup. Eitherway great info, appreciate you watching and sharing feedback! I continue testing and recording results, but let me know you thoughts.
@BrandonBeans 24 күн бұрын
@@GiantAntCowboy multi path interference is not a problem with DJI digital transmission, the packets are serialized and it knows time of flight for the packets over the air, so there's no concern of displaying the slightly older and out of phase reflections. Antennas as the engineers designed allows the o3 to use creative phase offsets in the transmission and reception of signal and this forms constructive interference to boost this signal. Aiming antennas really can be a thing of the past!
@GiantAntCowboy 24 күн бұрын
@@BrandonBeans but you’re saying this only works with stock linear antennas? I didn’t actually test the stock linear antennas too much because I didn’t think performance was so great in initial testing, especially through “the gantlet”.
@BrandonBeans 24 күн бұрын
@@GiantAntCowboy I'm saying it is designed to work with the stock antennas, and no guarantees any other way. That's all really.
@robert-gille 25 күн бұрын
How does the vista compare to the O3 when using the same antenna setup?
@GiantAntCowboy 25 күн бұрын
At the moment I can’t comment on the Vista performance. I might pick up a Vista at some point for testing though, at which point I’ll post some comparisons. Thanks for watching, cheers!
@elxero2189 26 күн бұрын
The hglrc hammers are my worse antennas. I found thay the transmit anytnna frkm the wuad is pretty improtant maybe even more than the receieve. As for the true rc patches without them i have the woorse oerformmance on hdz
@GiantAntCowboy 25 күн бұрын
Interesting, I got these HGLRC antennas because the were the longest antenna with a UFL connector I could find. At the moment pretty happy with the performance of this setup.
@Phoenix.- 26 күн бұрын
Great Tests! Regarding the long range part, do you prefer the DJI Goggles V2 for your daily flights to the newer models or is it just that they have a better mounting interface for the different antennas to run the tests?
@GiantAntCowboy 25 күн бұрын
Thanks man. I have actually tried the Goggles 2 or Integra yet, so I can’t speak to them. The V2 goggles are great because swapping antennas is simple, I can fit glasses under if I’m not wearing contacts, and I got them used for a good price!
@Phoenix.- 24 күн бұрын
@@GiantAntCowboy With the Googles 2 & 3 range improves. But have the feeling; the V2s still offer a better immersive experience of them all during flight.
@Mr.Laidukas 26 күн бұрын
I was already missing your videos and waiting for a new one. You edit them in calm, esthetic, pleasing manner. They are like ASMR, I enjoy them even if content is not relevant to me. For example I do not have and do not fly DJI.
@GiantAntCowboy 25 күн бұрын
Hey man thanks, I appreciate you on-going support! I wish I could produce more videos, but my obsession with details and lack of free time limit my production capacity to like one video a month… which system do you fly the most? I have a few videos in the works.
@Mr.Laidukas 25 күн бұрын
@GiantAntCowboy I enjoy flying fixed wing planes line of sight. I also enjoy technology, so I occasionally fly FPV to learn technology and try new systems and setups. Curently, I use Walsnail V1 goggles with different Vtx.
@GiantAntCowboy 24 күн бұрын
@@Mr.Laidukas cool, I haven’t built a fixed wing yet, though I used to fly RC Planes years ago. It’s on my “to do” list! WalkSnail is perfect for fixed wings, can’t believe some of the range tests I’ve seen!
@WildpixFPV 26 күн бұрын
Thank you so much for the great work, the way you set up the screen is super professional now! I would have preferred some more "usual" upgrade patches only instead of the multiturn-helicals. Did you ever try the Maple Wireless Mjolnir? I have them laying around, waiting way too long to finally build a O3 setup with the Goggles V2 for them.
@GiantAntCowboy 26 күн бұрын
Thanks, appreciate the comment. I’d love to test more antennas but decent high gain antennas are expensive. This video will only make like $3.50 in ad revenue… so I can’t justify buying antennas just to test. These Helicals only cost like $5 each to make and perform great! Are they’re any antennas you’d like to see me test though? You mentioned the Maple Mjolnir setup, maybe I can reach out to some companies for samples to test. Thanks for watching, cheers!
@Dec1duousTree 27 күн бұрын
Great video! Thanks for sharing! 🙏
@GiantAntCowboy 26 күн бұрын
Thanks bud, appreciate the comment!
@vk2icj 27 күн бұрын
With the 7 turn helical antennas, are they dual frequency 2.4/5.8? They only look 5.8.
@GiantAntCowboy 27 күн бұрын
They are only 5.8ghz, but I don’t use the 2.4ghz for DJI. My RC Link is ELRS Gemini.
@vk2icj 26 күн бұрын
@@GiantAntCowboy Thanks mate. Awesome flying. Do you think that sticking to 5.8 restricts your range at all?
@GiantAntCowboy 26 күн бұрын
@@vk2icj no, because the O3 system only uses 5.8ghz for FPV video. The 2.4ghz signal is for the DJI RC Link. The DJI FPV drone (and maybe Avatas) however can transmit video on 2.4ghz and does have noticeably better performance.
@reedfpv 27 күн бұрын
the old goggles uses h.264 encoding, while the goggles 2 (new one) uses h.265. you can punish it with very low bitrate still remains very flyable, even with the stock antennas. (I use x-airs tho.)
@GiantAntCowboy 27 күн бұрын
Interesting point, thanks for sharing. These retransmission systems (DJI/WalkSnail) make me nervous because they can disconnect when pushed too far. For mountain surfing I’ve always used Analog or HDZero, which have fixed latency/resolution, static feedback, and can’t disconnect (per say). However I’m obviously impressed with the DJI O3 system and will be testing it more in the mountains.
@awerks12 25 күн бұрын
Goggles don't encode the video, VTX does. There's a difference in encoding between Vista and O3. Goggles don't matter here/
@GiantAntCowboy 25 күн бұрын
@@awerks12 thanks for sharing, good point. I’m guessing O3 looks better/ can transmit the extra pixels because the h265 encoding. Is there any disadvantages to using h265? Link stability for example?
@awerks12 25 күн бұрын
@@GiantAntCowboy no, the only disadvantage is that more processing power required. Link stability is all the same.
@reedfpv 19 күн бұрын
@@awerks12 yea my bad, still h.265 encode
@Robocopter_fpv 27 күн бұрын
Check out OTR Helical antennas
@GiantAntCowboy 27 күн бұрын
Yea I know ORT and have always wanted a pair, however I’ve been making these helicals for years and they only cost about $5 each. Can’t beat that!
@Robocopter_fpv 26 күн бұрын
@@GiantAntCowboy curious if your DIY ones are as good. They definitely don't look too, too hard to make but the OTR have nice laser cut acrylic and the craftsman is very good. The problem for me is finding decent male to female plug ins for the goggles 2.
@Paulwhittingham 26 күн бұрын
@@GiantAntCowboydo you have a tut vid for the helical assembly? I can only get rhcp locally
@GiantAntCowboy 26 күн бұрын
@@Paulwhittingham here’s a video I made years ago showing how simple it can be to DIY. ( kzbin.info/www/bejne/ioSXl4yZiZh3e6c ) However if you want more detailed explanation tutorials, search @ModelRCReviews or @FalconRad, both have excellent video with detailed steps. I’ve been making and using these for years, cheap, simple & amazing! Let me know if you have any questions, cheers!
@GiantAntCowboy 26 күн бұрын
@@Robocopter_fpv OTR look very professional, and I assume they do some sort of tuning so theoretically they should be better than mine; however mine have always worked very well, I’ve made a dozen over the years, and they only cost about $5 each. FPV shops have adapters for the Goggles 2 that convert them to SMA or RP-SMA which could be a good option. Here’s a simple DIY video I made years ago - kzbin.info/www/bejne/ioSXl4yZiZh3e6c
@scottyh72 27 күн бұрын
I have gone 5 miles and 2.5k' up with truerc x2s on bottom and omni's on top. Stock 03 antenna on vtx. 20 mbs setting. Lowest bitrate was around 8.
@GiantAntCowboy 27 күн бұрын
Yea the stock VTX antenna works great, I just found it loses performance when turn due to its size. Using two tall Omnis isn’t necessary but does offer some performance gains. Appreciate you sharing your experience!
@xjet 27 күн бұрын
Stag--- geringly good tests. 😀
@GiantAntCowboy 27 күн бұрын
Thank you sir, appreciate you tuning in! The STAG & I are just trying to keep these tests fun & interesting.
@SetUP1 27 күн бұрын
I would really like to see a comparison with moonlight+WS_GogglesX and yours setup O3 + dji googles v2. Since in my region where I fly, there is a lot of different interference, and on the same antennas on the vista unit and the avatar HD pro Kit, imade tests, the difference in range turned out to be about 3-4 times in favor of DJI. the same effect was achieved with patches.
@colibrifpv 27 күн бұрын
Awesome test, it was nice to see the differences between these antenna setups... makes me want to go antenna shopping...
@GiantAntCowboy 27 күн бұрын
Have you tried making some helical antennas? Really easy and just incredible performance!
@LivLazer 27 күн бұрын
Awesome video, interesting results and incredible performance! Thanks!!
@GiantAntCowboy 27 күн бұрын
Thanks, happy to share, cheers!
@jaysonrees738 27 күн бұрын
The wild thing is that wireless video is still getting better.
@GiantAntCowboy 27 күн бұрын
Yea, curious what the O4 or the future of other FPV systems will bring. Even after years of doing these tests I’m still amazed by the capabilities of these systems!
@callsign_whitefox5146 27 күн бұрын
@@GiantAntCowboyso far personally not liking the o4 over the o3 could just be since it’s in the Avata 2 but yeah.
@GiantAntCowboy 27 күн бұрын
@@callsign_whitefox5146 interesting, what don’t you like about the O4 system?
@callsign_whitefox5146 26 күн бұрын
@@GiantAntCowboy mainly the goggles and the avata so far. sold it and went to using the o3 just cuz it doesnt feel right.
@WildpixFPV 26 күн бұрын
@@callsign_whitefox5146 No hate, just to put some counterweight here: I am amazed by the Goggles 3! Best and lightest fit for me, don't even feel them on my head and face! The picture, range, screensize and over all handling has reached the furthest optimum possible. Will never upgrade again (lol)! The Avata 2 is a good longrange cruiser and an amazing explorer with all its functions! But not suitable for true freestyle at all. Can't wait to slap some 04 Air unit on a built!
@Wild__FPV 27 күн бұрын
You totally helped me out, thanks man! The test was awesome - you're the best!
@GiantAntCowboy 27 күн бұрын
Thanks bud, appreciate the comment!!
@FPVVins 27 күн бұрын
thanks to you I discovered helical antennas, I fly with 2 helical 7 turns and lumenier patch at 7km I have 50.8mbs it's incredible 😮
@GiantAntCowboy 27 күн бұрын
Are you using DIY Helicals? 50mbps at 7km is awesome!! Glad to have helped, hoping folks find this video helpful as well.
@FPVVins 27 күн бұрын
@@GiantAntCowboy yes diy, 3d printed, i use a 1.5mm2 domestic electrical copper cable and the base is 1mm thick copper plate. I forgot to mention that is with the old dji unit, two hglrc antenna.. it's awesom yes, first time for me that i reach as much km.. i would like to test 10 or 12km the next time, with 6000mah i fly more than 20km flat
@GiantAntCowboy 27 күн бұрын
@@FPVVins amazing! Yea keep pushing the limits, exciting stuff. Very satisfied with this setup!
@WinstonSmith1984 27 күн бұрын
Interesting. You should try 4 helical antennas: you'll probably get an even better bitrate and lower latency at that range. I use 2 Pergoda triple feed patches on top with the Iflight Crystal plate and get reasonable range, but not as much as you got with the helicals.
@GiantAntCowboy 27 күн бұрын
Yeah I bet quad helicals would work great. I’ve used that setup on my HDZero and WalkSnail quads in previous videos. For this setup I’d like to use the iFlight Crystal antenna simply because it fits so nicely. Quad helicals are tricky to attach & aim properly and have to be removed after each flight. Thanks for watching, appreciate the suggestion and maybe for testing purposes I’ll make two more LHCP Helicals. Cheers!
@CarlPaulsen 27 күн бұрын
Excellent video, as per, but pleeeeeaaaassseee use megaBITS, not megaBYTES when talking about mbps, thanks...
@GiantAntCowboy 27 күн бұрын
Thank you sir, and yes good point… megabits it is. Cheers!
@InfinityDrones 27 күн бұрын
Awesome video as always! Looking forward to those teasers you mentioned.
@GiantAntCowboy 27 күн бұрын
Thanks man, appreciate the comment!
@aviphysics 28 күн бұрын
Great build.
@GiantAntCowboy 28 күн бұрын
Thanks bud!
@Happyants_ 29 күн бұрын
whats the best hdzero vtx for long range?
@GiantAntCowboy 29 күн бұрын
Both the Freestyle V1 & V2 VTXs are great. Flown both out 7km (4miles). However it’s all about antennas, because I’ve also flown the old 500mW VTX out 7km, done over 5km with 200mW & over 3km with 25mW. Are you using the goggles or a VRX?
@Happyants_ 29 күн бұрын
@@GiantAntCowboy idk I haven’t thought about that yet but i would rather get both because I want walksnail or hdzero I don’t like dji anymore
@Happyants_ 29 күн бұрын
Sorry I rather get the goggles not both*
@GiantAntCowboy 29 күн бұрын
@@Happyants_ ok, both work great, HDZ goggles are great and a WalkSnail VRX works well on them. Here’s my goggle antenna setup/testing - kzbin.info/www/bejne/eYrTmYlre7WVj8U I run helicals because they are cheap DIY & work great, (you don’t actually need four…) Crosshair antennas also work well and are smaller.
@Happyants_ 29 күн бұрын
@@GiantAntCowboy oh I saw that vid it was so funny the antennas look straight out of the future but I don’t have the tools to build something like that
@TimApologun Ай бұрын
you absolute legend, just saved me a mechanics bill, thank you!!!!
@GiantAntCowboy Ай бұрын
Hey, happy to help, cheers!
@marinehm Ай бұрын
Do you happen to know if they make helical coil antennas for DJJI (Goggles 2)? I have 2 pair of goggles. FS/Walksnail, Goggles 2. So far, i'm pretty impressed with both. I get some video jitters on the goggles 2. One of my local pilots suggested it could be the way I have the recording set up. Would that cause video jitter/stutter? It's like it's missing frames. 1/2 to Almost 1 full second gap between frames. It's weird.
@GiantAntCowboy Ай бұрын
Helical antennas work great on DJI, I did a bunch of tests recently, here’s a Draft version of my new video - DJI FPV Long Range Penetration Antenna Tests for Improved Signal kzbin.info/www/bejne/j5vYea2qbK9mjKc (haven’t finished it yet, so any feedback is welcome). Regarding the delay it could be an antenna or signal issue… towards the end of this video I talked show examples of stuttering I was getting with some of my antenna setups, even with decent MBPS. Let me know what you think. Cheers!
@joacimtidblad4594 Ай бұрын
Tack!
@GiantAntCowboy 28 күн бұрын
Takk Takk, very much appreciated!
@talonfpv Ай бұрын
Dude great content thank you so much! 🤘
@GiantAntCowboy Ай бұрын
Thank you, appreciate the support!
@mikaeluggla966 Ай бұрын
Thank’s a lock 😅 It worked perfectly!!!!!
@GiantAntCowboy Ай бұрын
Haha great to hear, cheers!
@BrutalBradVr Ай бұрын
Just had this issue on my 06 ninja 650r after sitting for a month of no use. Some wd-40 and a flathead loosened it right up. Just make sure to lubricate the mechanism in the cap and your good to go!
@GiantAntCowboy Ай бұрын
Great to hear! Surprisingly common issue with newer motorcycles. Never had this issue with my older motorcycles.