1.5v to 220v inverter

[@TechIdeasAG]

Li-ion charger circuit using 1 transistor kzbin.info/www/bejne/eoDHm6t8hcl9aZo

[@الحقيقة-د5خ]

Pl can u explain how it work means its idea?

[@fighters1000]

How much is the amp?

[@ayieshabrielle7234]

I got free energy, I plugged an extension cord in my neighbor's back yard, he still hasn't found it yet

[@TechIdeasAG]

OMG!!! Free energy really exist. 👍👍👍

[@johnhorgian4970]

Ayiesha. 🤗🤗😂😂😂

[@linhtinh6341]

Really cool😂

[@lukagtv1175]

There is no free energy 😋

[@kacka966]

Lol😂😂😂

[@alexpapapa82]

multimeter please!!

[@Денис-ъ9п2л]

Вот именно!

[@electroumit]

Multimeter can't measure output voltage. Because high voltage and high frequency output. Multimeter may be burn if measure output voltage when no load.

[@alexpapapa82]

@@electroumit 🤔

[@robmarrin6720]

@@alexpapapa82 in that case put the multimeter to amps and put it in series with the secondary coil to measure its output it won't be a huge current so a ten amp meter will be sufficient high pitched noise heard at the end is because the dc to ac output is not at the correct frequency for the led lamp

[@nosli230E]

@@electroumit high voltage ? High frecuency?

[@cristianmg6924]

Bien por el circuito. El problema es que da corriente alterna en onda cuadrada y no en onda senoidal (que es la que se necesita para la vida cotidiana), las cuadradas que las usen las raquetas eléctricas o fuentes de alto voltaje y poca corriente, pero las senoidales son más usadas y son las que mas necesitamos.

[@mjrnabac]

Si en el primario de un transformador tienes una onda cuadrada a la salida (en el secundario) tendrás un tren de impulsos con un tiempo de descarga dependiente de la carga en el secundario y obviamente la inductancia y resistencia de tu transformador. Un transformador no deja pasar DC, solo AC, por lo cual solo tienes cambios en tu onda de salida en los cambios de tu onda cuadrada y no cuando esta es constante. En escencia sería un tipo de filtro pasa altos. Puedes pensarlo también como que una onda cuadrada puede ser descompuesta en muchas ondas sinusoidales de distintas frecuencias, donde la ganancia de cada una de estas varía dependiendo de la constante de tiempo de tu transformador (dependiente de la carga), al tener mayor atenuación con las frecuencias más bajas tu onda ya no puede ser cuadrada.

[@pierpa_76pierpaolo]

I need to build a '220 vac 800 w stator armature to add to what is already there so as to get to 1600 w (1.6 KW). Any advice? With the ferrite proposed in the video I could make primary and secondary with a value in Henry based on the diameter of the wire chosen and the voltage and 'amperage needed to finish the project. Thank you very much.

[@mjrzwanenburg]

holycrap! that was a hell of a firework that happend in my house after building this and tried it reversed from high current into low!

[@fikrinoh1135]

For those who says its fake, transformer only works with a voltage that changes value over time. AC and pulsating DC do change value over time. In this case, he puts transistor, which means he make the DC voltage from the batter pulsating to the primary coil. Also, as you can see, this inverter is the simple one, which means it has low power output. The LED bulb he used in this video requires very low power to operate. So, this inverter is still powerful enough to empower LED bulbs but not the others.

[@pigeondamigion569]

Transistor... Making DC into AC voltage... Whaaaaaaaaaaaaaaaat?

[@fikrinoh1135]

@@pigeondamigion569 No. I didn't say that. I say, "Pulsating DC".

[@pigeondamigion569]

@@fikrinoh1135 "Pulsating DC" IS AC you silly peanut, it's a sine wave going from positive to negative, if you mean rectified AC, which goes from positive to 0, then it just would'nt work with a transformer, transformers don't work like that.

[@fikrinoh1135]

@@pigeondamigion569 Before you say I'm silly peanut, study first the difference between pulsating DC and AC. Pulsating DC flows in one direction, and the voltage never drops below zero. But AC moves in both direction, and it can drop below zero. Use the internet to do research first before you say something to the others. Search in Google "Can transformers work with pulsating DC" and "Difference between AC and pulsating DC".

[@suprememasteroftheuniverse]

@@pigeondamigion569 please, stop showing your pigeon's stupidity here. Your mom will thank you.

[@flyguille]

Yes, it can be done, but that AA will last too short time with that 9W load plus 2W maybe, convertion loss?. That is a basic Auto-oscilator, not controlled by any way, just lets that transistor runs freely, and not protection, so the EMITER-COLLECTOR JUNCTION will suffer with all those FEEDBACK pulses from the coil. It requires a protection diode in reverse in parallel with that junction.

[@СуперМарио-х3ь]

I agree and I think what conversion loss is much bigger. But it still interesting schem

[@rich1051414]

Now I can power my TV with an AAA battery! This will save me a ton of money!

[@williamguillen4113]

No. AAA ba

[@99199678]

Noo..

[@Bilknasmedia]

I would like to see electroboom reviewing this! 😂

[@mariocardoso160]

isto não é falso .é real e funciona a matematica e a electricidade esplicão este fenomeno

[@shashankhmgowda7668]

😵🤣🤣yes

[@4gauge10]

THE RECTIFIER!!.

[@mohanakrishnanp6934]

Yeahh me to broo😂😂😂

[@r2deizer681]

@@mariocardoso160 olá tenho uma dúvida e possível fazer esse tipo de transformador mas feito com una alternador de 12 volt com saída 220 para alimentar electrodomesticos de uma casa ou um ar condicionado por exemplo

[@clfung2008]

I wonder how long the battery will last in this situation ! Thanks for sharing !

[@KOSYAKOV__NIK.]

Дайте автору картофелину , два электрода и Саяно-Шушенскую можно закрывать...

[@rahman9023]

Думаеш не правда?

[@abdoun8214]

Thank you i can finnaly watch tv with only 1.5v battery!

[@nosli230E]

The smart TV only need 24v DC in my case

[@kartikeypanwar9622]

@@nosli230E he can watch 9 televisions in series 😂😂

[@andrejmatus2692]

I

[@ashfaqjuna]

Now you can bake pizzas with one AA cell.

[@Igor-nx9pd]

What's wrong with your brain?

[@engineerkohat]

With such a worst class whistling, this circuit has not practical weight.

[@harvinjoy9895]

Yes it can't handle too much abuse

[@markevans2294]

On the other hand the whistling counts against those claiming that this is faked.

[@harvinjoy9895]

@@markevans2294 yesh

[@granpatriarca3726]

It's just a joule thief inverter. it's 100% real and actually a common experiment in electronics.

[@suprememasteroftheuniverse]

What is a joule thief?

[@granpatriarca3726]

@@suprememasteroftheuniverse "A joule thief is a minimalist self-oscillating voltage booster that is small, low-cost, and easy to build, typically used for driving small loads. This circuit is also known by other names such as blocking oscillator, joule ringer, vampire torch. It can use nearly all of the energy in a single-cell electric battery, even far below the voltage where other circuits consider the battery fully discharged (or "dead"); hence the name, which suggests the notion that the circuit is stealing energy or "joules" from the source - the term is a pun on the age-old expression "jewel thief". " More info at wikipedia.

[@ALSomthin]

Well if you really wanted to light a led bulb with batteries just remove the rectifier in the bulbs circuitry and connect the bulb directly to tha batteries. The batteries will last longer.

[@amyprostmusic9646]

Would you explain to me what happens inside the transistor that allowa the current to oscilate? I can't get that clear, but I just can't figure it out by myself

[@dedi-asnawi]

pleas measure voltage on output with voltage measure tool.

[@wazileiyjh]

It will not last longer i think , because if it will last longer then the maker of this video might be popular now imagining 1.5v into 220v... But this video is better than free energy project.

[@westelaudio943]

This is one of the most basic curcuits. A CRT does the same thing by transforming your mains voltage 220/120V etc. Into 27000 volts for the picture tube. So nothing special here. Of course you can up-transform a battery's 1.5V to 220V mains, it's just not a very good idea since excessive current is drawn from the battery.

[@kuldeeprathod6802]

These is not possible because you attached dc source (bettary) and dc source not provided fluctuating magnetic flux

[@binaryrider180]

D882 change dc to ac

[@nilenninju4709]

@@binaryrider180 awwww right lool

[@kuldeeprathod6802]

@@Randibaaj_sala i forgot.... U r ri8

[@TheSharad97]

@@binaryrider180 lol.....a transistor never converts dc into ac..transistor is meant to act as either switch or an amplifier because of transferring the resistanc from one region to another..read transistor biasing circuits and it's working in Physics..😂😂

[@binaryrider180]

@@TheSharad97 He made a mini inverter...

[@charlescomodoro3483]

Preciso experimentar montar esse circuito. Vou usar o TIP41 da outra montagem. isso é um inversor que, gerando o campo magnético variável, pode sim gerar na outra ponta os 220Vac necessários pra acender a lâmpada. Penso que a pilha vai durar muito pouco. Mas é bem interessante este circuito.

[@Khushiparashar2679]

Winding calculation for 1.5 dc volt to 12 volt dc with this ferrite core

[@cachhomevideo1546]

Good work ..how long does battery last?

[@axelbelleris]

Thank you! 1.5V :O That´s pretty awesome! Greetings from Argentina. :)

[@lucasmelo6635]

Compatriota. Si conseguiste esos elementos para fabricarlo, pasame el dato jaja.

[@axelbelleris]

@@lucasmelo6635 Hola Compatriota. Son muy fáciles de conseguir. El transistor D882 suele hallarse en las lámparas de emergencia ésas fluorescentes, casi seguro lo encontrarás allí. El núcleo de ferrita cuadrado es el que encontrarás en cualquier flyback de monitor de PC de tubo y TV de tubo, todos sirven. El alambre de cobre no tiene que ser exactamente del grosor que te dice el vídeo, sólo debés cumplir la condición que el bobinado primario siempre tiene que ser de alambre más grueso que el alambre del secundario, y podés reciclar el alambre de cualquier transformador que encuentres, o del yugo del monitor de donde saques el núcleo del flyblack. La resistencia puede hallarse en cualquier circuito de potencia, en la misma lámpara de emergencia, o de donde sea, mientras sea de un valor de entre 10Ω o menos de 100Ω aproximadamente debería funcionar igual. La lámpara que tenés que usar sí o sí tiene que ser la bajo consumo LED o la bajo consumo fluorescente, porque la incandescente no funcionará. Debés armarte de chatarra para desarmar y reciclar componentes. Saludos desde Córdoba Capital.

[@lucasmelo6635]

@@axelbelleris capo!! Perfecto!! Gracias genio!!

[@lucasmelo6635]

@@axelbelleris Saludos desde Junín, Buenos Aires!

[@Shaurya_II]

How does this work the transistor isn't connected to any external controller to turn it on and of and without that there's no ac current so the transformer shouldn't work?

[@jayvaghela064]

Sir Can I Use D5011 Or C5296 Transistor In This Idea?????

[@ПавелМяус-ф5ю]

Translate pls)) Это не фейк, это обычный блокинг генератор! Он работает абсолютно на любом транзисторе, PNP или npn. Так же работает на мосфетах, например irfz44n, irf3205 и.т.д В общем, если вы не пробовали - не говорите, что фейк!

[@ПавелМяус-ф5ю]

No, this is not a fake. This is a standard blocking generator, it can be made on absolutely any transistor, PNP, NPN, anyway! it works even with the 92 case at 0.1A. just need to take a 12-0-12 transformer for example, and connect a collector to terminal 1, to the extreme base, in the middle of the power + or -, depending on the transistor, npn or PNP!

[@kirillb.51]

Батарейка быстро сядит да и такая лампа будет очень слабо светить

[@ПавелМяус-ф5ю]

@@kirillb.51 Но это не фейк, как многие говорят. Можно сделать более эффективную схему на мультивибраторе из двух транзисторов или мосфетов, мощность будет больше, но трансформатор тоже нужно перемотать во первых, вторичку и первичку, рассчитать на примерное выходное ≈220-230v Мощность от одной пары транзисторов tip41 и tip42(это стандартная пара PNP и NPN транзисторов, каждый током 6А) Вышло примерно 50-60w

[@ПавелМяус-ф5ю]

@Felix Cotov Это 2 разных типа транзисторов! И обычно, их выделяют от обыкновенных транзисторов!

[@ПавелМяус-ф5ю]

Cotov Дадада)) Все, пока))

[@ayushpaul9358]

u will need 23334 turns of coils on secondary to produce 220 v as u hv used 14 turns on primary...

[@paulomootores]

What music?

[@kunaldhar6713]

Sad music :(

[@johneygd]

I hate that music.

[@kjengtumbaga430]

What music

[@gurugian12]

Tell me if u know !

[@andriwtf222]

@@johneygd me to

[@HyperHyena88]

Does it have to be that exact transistor and resistor to work ?

[@jarmenkell2313]

It should be a great great mind-shocking invention if you measure the output voltage with voltmeter as well as wave form with oscilloscope.

[@SebTubesTV]

How long would the battery last

[@markolsen7438]

I am sorry for all of you that say this is fake,,,,,,it does indeed work, Although there is no piratical application for it other than light up a bulb or giving your friend a shock without the amperage. I learned to make these when I was a child some 50 years ago. It can be made out of your old phone charger only in reverse. Hook a battery up to the output end a touch the plug that goes in the wall and test for yourself

[@avtollic]

How many turns are there in each coil? Thank you!

[@Evgeniy09011985]

кпд небольшой с таким транзистором, лучше полевой ставить, и частоту надо повышать

[@григорийхудожник]

и для разгона полевика нужна микруха типа uc3842

[@UnknownPerson-nl7te]

is that black part magnet>?>??

[@MrAdeljas]

why don't you show how this circuit works ? some oscilloscope analysis

[@rajnish747]

probably cause he doesn't have enough money to buy one

[@avtollic]

Сколько витков в каждой катушке? Спасибо!

[@JohnvL]

We use no 220v and more. Europa use 230 v now from year 2004! Motor it's from 380 to 400v at 50hz.

[@mathwins7953]

John vL In belgium, we use 230v like you say, real triphase is 460 and for big project, we have 690v... Very usefull for big motor , if you don’t want to have a big bill for the electricity consumption... Power= voltage x Amps, for the same power, if we increase the voltage, the amps reduce, and the bill to... Also, it’s more dangerous, if your body has a resistance of 7M Ohm, at 230v : you get 3,3mAmps, a quite dangerous... but at 460v : 6,5mAmps and for 690v : 9,8mAmps, trust me, the differencial in 460v and 690v don’t react like a 230v, he take more time (1-3 seconds) for cut the circuit and try to save you

[@mmohhinni]

from where you got the core? You are mentioning about voltage. But how much current?

[@based5578]

I think i can already heard ElectroBoom say "B.S.A.F ©".

[@naturesounds1664]

If we add an other battery bor better ampere, can it power a receiver?

[@genocidallemonade9188]

name of music please 0:07

[@adventurefishingscotland3918]

Do you need to use a flyback tansformer core?

[@hoofbags]

Inverters are great, aren't they? I used to experiment with those contact breaker style ones but the frequency is much lower so not as efficient. Great movie. (o:

[@HaveFaithInGod]

You forgot to add the little bottle of water to the parts list. What's it for anyway?

[@15s.98]

Это блокинг генератор. It is an blocking oscillator

[@ЮраБаранов-ж7г]

Без кандера не бывает.

[@AchuMeris-sp1pc]

Pls how did you get the transformerror core

[@سيديمحمدسيديمحمد-م1ب]

Converter not inverter

[@flyguille]

Inverter, the same function and basic principle as your home-ups!. Inverter because it elevates the voltage, converter because it is converting DC to pseudo AC. But in real it is a DC 1.5v to pulsar DC 220v or good enough, for pseudo AC you needs to run the transformer backward, so it is required another transistor handling the other half.

[@afzl_007]

How much time it will work brother. Plz respond, iam highly curiosed😊😊

[@kingskiller1253]

No no you can't do It that lamp has own battery and it need very low power to work

[@juntech..3440]

what if i add another transistor will the current get high?

[@martinlodeltech8318]

Hice con un transformador de 13+13 usando el secundario como primario y un par de baterias 18650 en série de 2200mAh y soportó una lámpara de 9W pero hasta 205v con una R de 240 y un 2SC5200 (con disipador).

[@TuMundoAndroideMania]

Como es que la vuelta genera voltaje? Y si la misma vuelta que le dor no le doy vuelta y dejo el cable largo no es lo mismo no entiendo eso de la vuelta ya que veo que los alambre esta separado y no se junta como pasa la corriente a caso es invisible o inalámbrica se vuelve

[@SebTubesTV]

Does the frame have to be metal?

[@MrAntoxa01]

У нас на работе электрик смеялся, над этим видео. Поспорили на бутылку. Собрали эту фигню, его током убило.

[@slavikpisik]

Господи🤣🤣😂 как смешно😁😁😂🤣

[@Серёга-у8е]

а током то чего убило? по пьяни в щиток полез?)

[@EW6RN]

А я как-то еду на электровозе (машинистом работаю), тут внезапно пропадает ток в контактной сети. Благо у меня с собой эта схема была, закинул провод на рога электровозу, подключил батарейку от фонарика и поехал!!! Правда два тяговых электродвигателя спалил, не выдержали, но всё равно автору спасибо!

[@Егор-л7ч1э]

Хорошая история жаль что вранье, там напряжение высокочастотное и ток там мизерный

[@EW6RN]

А видео значит правда да?)))

[@idelcinomm2599]

montei uma pequena usina aqui em casa ,fantastico mudou a minha vida

[@rakeshv46]

I like your videos sir,, thankyou

[@TechIdeasAG]

Thanks

[@PaffcioStudio]

It is probably an eviscerated LED bulb. Stickery flash diodes used in phones have been installed in it to give strong light.

[@rearm2046]

this is real guys you need electronics 101 for dummy to understand this is call switching power supply(Joule thief) it oscillating to 50hz that is why you heard a weird noise when he connect the battery

[@rich1051414]

The sound depends on the load, as the current getting pulled off controls the rate of oscillation. No load will simply short the battery out lol.

[@Rimonds]

Can you explain a bit more, how long can one battery like that power a 220v light bulb? How is the efficiency of a circuit like that? does it heats up and how big of a load can it handle? :D this seems really cool to me

[@rearm2046]

@@Rimonds about 30 second more or less

[@rearm2046]

@@Rimonds 30watts below it can handle

[@rearm2046]

@@Rimonds it will heat up if there is no load and if you change the battery voltage

[@TuMundoAndroideMania]

Como es que la vuelta genera voltaje? Y si la misma vuelta que le dor no le doy vuelta y dejo el cable largo no es lo mismo no entiendo eso de la vuelta ya que veo que los alambre esta separado y no se junta como pasa la corriente a caso es invisible o inalámbrica se vuelve

[@johnhorgian4970]

That battery is empty in 3 minutes. 😂😂😂😂

[@musicmixrecords]

14:250 це 1:17.6 це 1.5:26.8 вольт на виході. Чи я не правий? Почепіть вольтметр на вторичку 😃 використана лед лампа з підтримкою діммінга. Горить в чвертьнакала чи щось таке. Найопка чистої води

[@СергейСергеевичКунатенко]

Саме так!

[@СергейПлетнев-ь3м]

Братка не гони так сильно! завязывай с фэйкоми!

[@smert_rashistskiy_pederacii]

That's cool. But how long even LED lamp will work on one 1.5v АА-battery?

[@smert_rashistskiy_pederacii]

​@Tassadar En Taro I said one charge will be too short and you saying bulb gonna die even sooner than one charge lasts... perfect system...

[@williamguillen4113]

Just a little.

[@СлавкаГудело]

Конденсатор бы ещё припоял

[@Короткообовсём-м3э]

пОять, это от слова пОйка?

[@СлавкаГудело]

@@Короткообовсём-м3э я не заметил

[@pigeondamigion569]

Ты думаешь слишком логично УНИЧТОЖИТЬ УНИЧТОЖИТЬ

[@vladimirilin1980]

там можно было место батарейки катушечку и чтоб без электричества работало все. бесплатное.

[@codesvlogswithhemal4936]

for how much time can the battery run the led?

[@ВяачеславВоробьёв]

Лампочка переделана?

[@ПавелМяус-ф5ю]

Вячеслав, нет. Схема сделана на самом простом блокинг - генераторе. Работает с абсолютно любым транзистором в любом корпусе, но нормально работают лишь некоторые.

[@ПавелМяус-ф5ю]

На выходе HV с высокой частотой, зависящей от ёмкости внутри транзистора

[@olololo2529]

Мне интересно сколько потребляет это лампочка 💡??

[@fomasvet9235]

@@olololo2529 точнее) на сколько хватит батарейки, в импульсных системах сколько потребляет лампочка не совсем корректный вопрос, тем более светодиодная

[@АхметКарим-в9ч]

@@olololo2529 написано 3 ват

[@JWH3]

What is the flux you use there? Or is it solder paste?

[@TechIdeasAG]

Yes, only solder paste

[@JWH3]

@@TechIdeasAG what do you use for the paste?

[@JahanZeb1976]

wow. Awesome. With such a small battery you are glowing such a big bulb! I would make such thing and will run my air conditioner in summer and heater in winter!

[@Engineer9736]

It's an LED bulb so it could run for a bit on a penlite (If you rip out the 230v electronics). But this whole video is nonsense indeed.

[@MrKwinto29]

Its a piece od shit.

[@kyawsankyawsan6656]

Cartoon

[@kyawsankyawsan6656]

Carton

[@rohanambike6476]

Can you tell how to make a 5v dc to 220 v ac Inverter ???

[@CEzikMaj]

This can't output shit ~ Electroboom 2016

[@yasyasmarangoz3577]

Link please

[@ksk8549]

я вижу вы очень хорошо разбираетесь в электрике ! скажите вот у меня возник такой вопрос есть "нетбук" ASUS TRANSFORMER BOOK (T100TA) питание micro-USB 5V-3A есть один "повер"-банк с выходом 5V-2A (и другой "повер"-банк с выходом 5V-2A) при этом каждого отдельного банка явно не хватает для зарядки "нетбука" ! а вот если соеденить шнуром один USB-выход банка (и соеденить шнуром второй USB-выход другого банка) в один общий провод (паралельно плюс к плюсу)-минус к минусу (то по идее на общем "выходе" получим 5V-4A) т.е вроде получается что при таком соединении вольты не сложатся (а вот амперы именно сложатся) и тогда с такого общего паралельного "повер"-банка можно с запасом питать "нетбук" ? или так не получится и всё-таки нужно ставить на каждый провод диоды ШОТКЕ что-б ток шёл только в одном направлении (и не "перетекал" просто-из банка в банк при этом не заряжая "нетбук") ? что вы мне подскажите по этому поводу

[@ДмитроКилименчук-ы3б]

По идее должно сработать. Диоды выбирать с наименьшими падением напряжения на переходе и запасом по мощности. Считаю не помешают, так как схемотехника повербанков может быть разная и при параллельном подключении могут быть небольшие перекосы напряжения.

[@diy576]

input 1.5 v. =14-0-14 / input 12 v. =...?...0....?..

[@itsglizda345]

112-0-112 but i'm not sure

[@diy576]

@@itsglizda345 ขอบคุณคราฟ

[@diy576]

112-0-112 =12v. //// Output 250 = 220 V.//// 500 v. =....?.....คับ

[@itsglizda345]

@@diy576 112-0-112 in primary is 250v in secondary ?

[@Andrey-wolt]

А про индукцию ты забыл ,олень? В таких схемах напряжение на выходе зависит от тока!!лось!

[@kencohagen4967]

How many turns of wire on each side? Where can you get transformer magnets?

[@johnruscigno5738]

ken cohagen it looks like the ferrite core of a fly back transformer, you get them out of an old TV

[@TechIdeasAG]

Before making comment that, this video is Fake, please watch this video also kzbin.info/www/bejne/bJ7UZ6Npr6toi7s

[@АрсенийЕгин-х1ж]

В России такую схему соберёт первоклашка! Удивил бабу х...м!!

[@6p1p]

I think this is a half royer inverter which using the magnetic saturation to oscillate, it similar like blocking oscillator.. The video should be real. the only thing is some cheap LED lamp they are using capacitor dropper and capacitor impedance are frequency dependent . When the inverter produce higher then line frequency which is 50/60Hz then the capacitor will have lower impedance which make less voltage drop. or more current to drive LED.. This type of inverter output waveform might having some spike voltage rather then square wave.. the spike voltage can easily go up few hudred or even Kilo voltage. You can try to light up a flourscent straight lamp , flourscent lamp require higher voltage to break down the gas and working voltage will be around 60-200V.

[@eduardodaniel9433]

they are idiots, I know it works I did, thanks for the content !! ☺

[@phucnguyen-wh5en]

Xao lon

[@gordonshumway4801]

@@АрсенийЕгин-х1ж в роиссии могут только бояру херачить

[@eliseumga2]

What other equivalents can you use in place of the D882 transistor?

[@MrKwinto29]

Its fake;)

[@eliseumga2]

@@MrKwinto29 😥

[@williamguillen4113]

Any, same polarity, same case.

[@LacerationAudioPinoy]

Electroboom explain this

[@LHJARS]

Learn about electronics and you will know. There are good books

[@bloverprimal5086]

I think you have pretty good patience to make that about 1:15 ratio coils. I wanna put some iron shavings there

[@waynegouin939]

Not sure its real or fake. But automotive coils take in 12V and put out10,000 volts, so its very possible. Tesla did lots of this kind of stuff, too bad the money mongers were against him, they should have worked with him and embraced his genius, but they were blinded by greed and money.

[@TechIdeasAG]

It's 100% real. You can try it

[@mr.mythoclast4451]

it`s real, yeah you got he clue! it`s just a transformer with a small oscillator. you can also do it more efficently with 2 FET .. it`s a Inverter

[@allrightenergy]

You are smart.

[@joseeduardodelangelhernand6412]

Aunque de más voltaje, la potencia será la misma y la determina el núcleo. La relación de transmisión ya solo es por si va ser reductor o elevador. Es algo básico

[@ivansereev6113]

хм..мало верится

[@ПавелМяус-ф5ю]

Но это правда)) Это стандартный блокинг - генератор))

[@ПавелМяус-ф5ю]

@Felix Cotov Защитник бл*ть😂 Ну вот нехер обсирать нрмальное видео, что это мол фейк, фейк... Руки из жопы.

[@Andrey-wolt]

И мне мало верится, что ты не Даун. Это блокинг генератор..иди учись

[@SentrionVigines]

Ivan Sereev Да запросто, но абсолютно бессмысленно. Что бы преобразовать с 1.5v до 220v и питать нагрузку в 3w, от пальчиковой батарейки должен протекать ток в районе 2Ампер . Это называется бессмысленная и беспощадная х@йня.

[@ivansereev6113]

+Sentrion Vigines ни о чём тогда

[@noobnitesh]

Hey bro I have a question that what if we don't use resister and transistor.

[@josefaschwanden1502]

It doesnt work

[@mariopodskarpie]

Good idea. Congratulations. Like and hands 🐾 up!

[@TechIdeasAG]

Thank you

[@kekahazra9769]

What's that black hollow rectangle ?

[@хххх-з8м]

Okay! 👍🏻 Like! Brawo!

[@bondamabond4551]

How many numbers of turns makes 220v coil winding

[@enceladussatellite1304]

Any radio amateur requests the principial scheme.

[@MEI3D]

muy buen trabajo pero no se confundan esto es de CD/CD y no de CD/AC, si me equivoco expliquen el porque, saludos👌

[@ДІД6996]

руки тебе поотрывать - за такую намотку

[@васявасиливич-э8б]

За что ты чо не одыкватный чтоли не смотри

[@FUNKAFANTAS1]

сам попробуй намотать коилы

[@13-й-ш3ц]

Funka Fantas - HW а что там такого страшного, мотал и не раз и намного ровнее, просто нужно иметь немного терпения...

[@ДмитроКилименчук-ы3б]

Согласен, мотать целый слой витков поверх поверх входящего провода тупо. Высоковольтный трансформатор пробьет на раз под нагрузкой, хотя в его случае с запиткой от 1.5v это не страшно.

[@NickyDIY101]

why we need 10 ohm resistor? what happen if lower resistant than 10 ohm or if totally without resistor?

[@Євген-е4г]

Блокинг- генератор, и что? Я таким люминесцентные лампы когда то зажигал лампы.

[@kamickgd723]

0.2мм, wrap one layer of tape between each layer of wire, finished with 250 turn. 1mm magnet wire 14-0-14 ноль это отвод середины. D882 транзистор 10 ohm resistor

[@aderlandioporoka5243]

Mintirozo vai inganar outro

[@suprememasteroftheuniverse]

Aprende a escrever primeiro.

[@GustavoOrtizz]

Master of the Universe habla en otro idioma

[@aderlandioporoka5243]

El Cabeza de Pingo :D ei amigo este espero me to funciona mesmo?

[@GustavoOrtizz]

Aderlandio Poroka Speak un english or Spanish please :(

[@aderlandioporoka5243]

El Cabeza de Pingo :D português sou brasileiro

[@husein522]

Y is ferrite core use can we use only magnet?

[@johnangel5869]

Неплохой развод для тугодумов, мне понравился фокус!))))

[@AndrejGavriluk]

John Angel Повышающий трансформатор. Где фокус ?

[@-tvdis7213]

@@AndrejGavriluk фокус в том, что это не повышающий трансформатор......... это его собственно ручная фейковая хрень для развода.... Инвентор не может таким маленьким быть)))

[@Короткообовсём-м3э]

Всё тут законно. Простейший инвертор.

[@catinka]

@@-tvdis7213 Может, он очень слабый. А такая лампа заработает и от 160 (Может и от 100) вольт. Да и такой лампе плевать на то какой на входе сигнал - туда хоть постоянку, хоть 400кгц подай она заработает.

[@-tvdis7213]

@@catinka блин, чувак , так и быть не поленюсь объяснить эту хуйню... Он взял батарейку, один контакт пустил на транзистор( который работает как кнопка и открывается при определенном напряжении), эта ситуация уже абсурдная, потом он к одному из выводов транзистора подключает резистор который еще хрен пойми на сколько понижает напряжение, ну и в оконцовке он ска подключает это дерьмо к катушке, ... Ну а второй контакт сразу идет на катушку. Эта схема фейк, создана не для, тех людей, кто на инженеров учился. Видео созданно тупо для раскрутки ПРОСМОТРОВ в США...

[@unyimedavid821]

what if i use a 6volt battery, will it work as well or do i need to increase the size of magnetic coil?

[@williamguillen4113]

Need more turns in the transformer.

[@user-yw7yv9yi7i]

Народ - вчіть фізику і принцип роботи транзистора .

[@manuelalvarez9852]

How,,long is it on..please

[@pauloinventostube7533]

Muito bom !

[@oswaldofloresmamani3758]

Debujos animados

[@prabhakarranjan6433]

What is black product you have used