1.6 HDI 8v - Vibrations and rattles at the air filter box

Рет қаралды 19,604

11 ай бұрын

How to solve the vibrations and rattling of the air filter housing (air filter box) in the Peugeot & Citroen 1.6 HDI 8 valves, Euro 6, Euro 5 engine
Part OE number code: 1623159380
- Gasket for connection with the turbine. The ring, it must have the dimensions 60x50x5mm: outer 60 mm, inner 50 mm, rubber ring thickness: 5 mm: s.click.aliexpress.com/e/_Dlg...
☕🍵 If this video tutorial was helpful to you, you can press the "Thanks" button to buy me a coffee 😊
1.6 HDI DV6FC
Comment résoudre les vibrations et les cliquetis du boîtier du filtre à air (boîte de filtre à air) dans les moteurs Peugeot et Citroën 1.6 HDI 8 soupapes, Euro 6, Euro 5
Cómo solucionar las vibraciones y traqueteo de la caja del filtro de aire (caja del filtro de aire) en el motor Peugeot & Citroen 1.6 HDI 8 válvulas, Euro 6, Euro 5
Como resolver as vibrações e ruídos da carcaça do filtro de ar (caixa do filtro de ar) no motor Peugeot & Citroen 1.6 HDI 8 válvulas, Euro 6, Euro 5
Cum se rezolvă vibrațiile și zdârâitul carcasei filtrului de aer (cutia filtrului de aer) la motorul Peugeot & Citroen 1.6 HDI 8 supape, Euro 6, Euro 5
Как устранить вибрации и дребезжание корпуса воздушного фильтра (корпуса воздушного фильтра) в двигателе Peugeot & Citroen 1.6 HDI 8 клапанов, Евро 6, Евро 5

Пікірлер: 51

@thesieht957 14 күн бұрын

Thanks for the video. This is the only video about this problem on KZbin. A problem that all owners will have, when owning a car with this engine

@muhitkhan5072 2 күн бұрын

Thank you for making this video. I completed the replacement on my 1.6 Peugeot 208. It took me 30 mins and was easy to do. I did need to use a T25 Torx screwdriver.

@alexvlasin8530 10 ай бұрын

Mulțumim de video! N-a rezolvat-o mecanicul, am rezolvat-o eu acasă cu ajutorul tutorialului tău 😊

@salimmetin 2 ай бұрын

Very good video with detailed instruction. When the severity of the vibrations increases, you should check whether the engine is running properly. The cause of extra heavy vibration should be addressed and fixed.

@joelpichon3369 Ай бұрын

Bonjour , Merci à vous car le Garage n'a jamais solutionné mon pb de bruit qu'on entendait dans l'habitacle au niveau des pédales , il ne trouvait pas d'où venait ce bruit malgré plusieurs recherches !!!! , un grand merci à vous car je ne savais plus quoi faire pour ce bruit vers 1500 et 2000 tours ..(qu'on entendait plus quand il faisait froid, Vous super !!!! j'ai remplacé les joins et plus de bruit !!! Bravo à vous

@AdrianDragan 21 күн бұрын

Bonjour! Je suis content de t'avoir aidé.

@FudgeMaths 9 ай бұрын

Just replaced mine - thank you once again for the video Adrian - I knew exactly what to look for. All it cost me was £10 for the set of rings and about 30 minutes of my time. My rear rings were both missing and the front two were worn. For a novice like me it is also very satisfying to be able to carry out a job like this rather than send the car to a garage - I always used to when much younger and when cars were simpler but the complexity now puts me off. In case it helps others: I was working on a Grand C4 Picasso series 2: I found it easier to take the screws out of the bottom air intake tube where it joined onto the front of the car and remove the whole section. I needed a T25 rather than a T20 On my car the air box is further under the bodywork so the 3 screws were harder to get to. I didn't have a 90 degrees tool to unscrew the top of the air box but, after taking off the various tubes, I was able to bring it forward enough to get a straight down screw driver down to unscrew and replace.

@gyorgyhorvath8899 Ай бұрын

Hi I assume you live in the UK? May i ask where you were able to buy a set of rubber rings? Thanks George

@revi330 5 ай бұрын

Thank you so much for making this video! I replaced my used pads (2 of them in the back wasn’t even there) and my car is way more quiet and vibrations are significkly lower, before changing them i fell those vibrations under my feet now it’s gone. Cables were scratched and thanks god i found your video because i would never know that i need to change 4 small gum pads to make my car more comfortable and prevent my car from more dangerous situations. Thank you.

@AdrianDragan 5 ай бұрын

Hello. I'm glad I was of help to you.

@Predrag.Mihailovic 3 ай бұрын

Thank you so much for making this video!

@AdrianDragan 3 ай бұрын

Thank you. I'm glad I was of help to you.

@revi330 5 ай бұрын

Thank you so much for making this video! I replaced my used pads (2 of them in the back want even there) and my car is way more quiet and vibrations are significkly lower, before changing them i fell those vibrations under my feet now it’s gone. Cables were scratched and thanks god i found your video because i would never know that i need to change 4 small gum pads to make my car more comfortable and prevent my car from more dangerous situations. Thank you.

@AdrianDragan 5 ай бұрын

Hello. I'm glad I was of help to you.

@user-uk6ln8hf2p 6 ай бұрын

Merci bcp

@FudgeMaths 9 ай бұрын

Hi Adrian, Thanks for the post - am aiming to replace my rubber rings this weekend as my airbox clearly isn't attached at the back properly. Out of interest, what was the degreaser you used and is it safe for use on the plastics in the engine bay? I bought some WD-40 Specialist Degreaser a couple of days ago but realised it isn't safe for plastics - frustratingly, when researching it, I ended up on the USA website which has a very similar product suitable for plastics but the UK version isn't. Many thanks

@AdrianDragan 9 ай бұрын

Hello. I have not researched about my dehresant if it is suitable for plastic, but I have used it many times in the last years and have not had any problems. However, if the manufacturer says about your product that it is not suitable for plastic, I would look for another one that goes with plastic. Cheers!

@GrooveMushroom 6 ай бұрын

Very nice video) How is your oil leaks? Maybe you will make video about turbo gasket change? Mine looks the same as yours, and air filter started to rattle also 🙂

@AdrianDragan 6 ай бұрын

Hello. For the moment, there are no more oil leaks at the turbo, but I will order a gasket for that connection of the plastic tube with the turbine. The ring, it must have the dimensions 60x50x5mm: outer 60 mm, inner 50 mm, rubber ring thickness: 5 mm: s.click.aliexpress.com/e/_DlgxLy9

@GrooveMushroom 6 ай бұрын

@@AdrianDragan But is there a ring from the factory? I was in 3 auto shops today, and they cannot find this part..

@GrooveMushroom 5 ай бұрын

Bought air filter box sealings, thanks a lot!! But I need a code of this turbo sealing ring.. Bit of a problem now)

@AdrianDragan 5 ай бұрын

@@GrooveMushroom Hello. I did not find that ring in the Peugeot spare parts catalog. But I found something on Aliexpress, I haven't tested it yet. The ring, it must have the dimensions 60x50x5mm: outer 60 mm, inner 50 mm, rubber ring thickness: 5 mm: s.click.aliexpress.com/e/_DlgxLy9

@bigT4875 3 ай бұрын

Hi Is is the same pattern to replace the rubbers with Peugeot Partner Tepee ?

@AdrianDragan 3 ай бұрын

Hello. If you have the same engine, it is the same procedure.

@MichauFA 10 ай бұрын

Hey Adrian, first, cheers on the video! Just did the replacement preemptively, following your guide. But, in the process, I broke off the vacuum pipe on the filter body, I noticed yours is missing too. I glued mine for the time being but eventually want to buy a new body and put it as it should be. My question is - how do you remove that damn hose from the pipe without damage? :) I was unable to figure it out even after the 'incident.

@AdrianDragan 10 ай бұрын

Hello. I bought this car with that pipe already broken, so I can't tell you exactly how to remove it, theoretically you press the fixing clips and it should come out, but in practice it kind of breaks. You can improvise with a small hose tube to put it as you see in my video.

@carlocascionedalmonte7711 10 ай бұрын

would you know the measurements of the tube you inserted into the vacuum pipe? I tried to find one similar but they are all too big. What material is the tube you inserted?

@carlocascionedalmonte7711 10 ай бұрын

Hi Adrian, thank you so much for your video. For some time now, after having replaced the air filter, I have noticed that inside the passenger compartment, accelerating up to 1.1 - 1.2 rpm, a vibration-like noise is heard which disappears when it reaches 1.4 rpm. I checked that the front filter box support rubbers are still and I haven't noticed any particular movements. Could this vibration be caused by the mounting rubbers under and behind the filter housing? Thank you so much

@AdrianDragan 10 ай бұрын

Hello. You should also check the tires that are mounted behind the casing, on my car those tires were the most damaged.

@carlocascionedalmonte7711 10 ай бұрын

Thank you so much I will do this control

@johnmchugh9914 7 ай бұрын

@@AdrianDragan Amazing vid! Thank you so much. What are the.... " tires that are mounted behind the casing".... that you mention? Do you have a pic or a vid? I just don't understand what you are referring to when you say 'tires'?

@chrisdenik 8 ай бұрын

Hello Andrian. Is the same part and for Peugeot 3008 mk1?

@AdrianDragan 8 ай бұрын

Hello. If the model of the air filter housing is the same on your car, they probably have the same code. It would be best to go to an auto parts store to identify the exact reference.

@EroticRalle 11 ай бұрын

Can you do a video on replacing the valve cover gasket?

@AdrianDragan 11 ай бұрын

Hello. Maybe in the future I will make a video on how to replace the cover gasket.

@MrManole19 9 күн бұрын

Salut,am un motor 1.6 hdi psa ,90 cp ,din 2008, si imi tremura la relanti,ce imi recomanzi sa verific.Multumesc

@silenthitman47 2 ай бұрын

Vad ca e rupt stutzul de la conectorul 2 , care face parte din capacul carcasei filtru aer...azi am schimbat capacul sinei pe acelasi motor....mecanicul l a rupt la schimbul de filtru... ar trebui si tu sa il schimbi daca vrei....

@AdrianDragan 2 ай бұрын

Salut. Multumesc pentru recomandare. Momentan nu am nicio problema cu acea improvizație. Dar m-am gândit și eu sa schimb capacul, totusi la mine va fi necesara și înlocuirea acelui furtun ce se conecteaza la tubul capacului.

@curranjoey 4 ай бұрын

Servus. I believe the link to AliExpress you provided in the description is incorrect?

@AdrianDragan 4 ай бұрын

Hello. In the link is only the sealing ring of the air intake tube on the turbine. I left the code for the round rubber pads for the air filter box: 1623159380. You can buy from your local parts store, but I recommend checking with the store that this code is compatible with your car.

@curranjoey 4 ай бұрын

@@AdrianDragan ah! Multumesc.