1 door Traulsen freezer warm

[@vhj5803]

I work at a high end hotel in the maintenance department and all of our reach in coolers and freezers are Traulsens. The cab and evap sensors go out sometimes and I’ve replaced them before. Great job and great video.

[@Eddy63]

Great Saturday fix Super Dave ... Hope the customers appreciate all the good jobs ,not only you do but all the other guys on these channels do ... Lot of good people on here ...

[@mattagee8104]

Always good to save those old parts. They’ll get you through a pinch. Good job. Thanks for sharing.

[@paulnye6025]

Always good to harvest parts from retired equipment. That’s gotten me out of many weekend jams

[@ajhvac6207]

Ha ha Dave “ I had to”. Love you man!!! Get that coil clean... you’re the best...

[@gene-khvacr]

SuperTech!!! Great attitude fun to watch keep it coming bro great tips shared 👈👍👍👍😎

[@deafhvacrsocal5292]

Good to know about temporary sensor part...I do have several new sensor with me. thanks for sharing !

[@superiorcomfortheatingairl3373]

That was a good HVAC Shop Talk last Sunday with you, AK and Zack

[@jessicamikhail4442]

Thanks for such a detailed video- it really helped me out!

[@wilsongb09]

And That is why you are a supertech. 👍keep up the good videos coming.

[@TheLenaweeTrekker]

WHAT! YOU DON'T HAVE EVERY SENSOR KNOW TO MANKIND ON YOUR TRUCK! Seriously, of all the makes that I have serviced over the years, Traulsen has been the least troublesome. Then they went and put the smart motors into them. A bird farts on a power line and knocks out the smart evaporator motor assembly. That's oh so much fun to replace.

[@HVACRDUDE]

Literally did the exact same video..I'm like wait...I remember this..haha..NICE REPAIR DAVE!

[@jimlamperti]

I have a 2009 traulsen one door freezer, I bought it used having trouble with the txv valve sticking because of green dye that was put in.What txv valve do you like? And how would you clean out the system if possible. Changed out the 404a gas twice and filter dryer, still has trace amounts of green dye. Thank you for any help.

[@NorCal-refrigeration]

Sporlan or danfoss valves. Just replace the valve.

[@jimlamperti]

@@NorCal-refrigeration thank you, 1/4 ton or 1/8 ton?

[@NorCal-refrigeration]

@@jimlamperti can’t remember call Traulsen with model number

[@timothydelgado4907]

Do you have any tips on getting those screws out behind the top panel for the condensing unit area

[@lorenzoontiveros7875]

Good afternoon Dave can I ask a question on a unit traulsen ADT132wut-hhs is a unit whit a refrigerator in the top and freezer on the bottom,the top unit has the coil sensor clamp on the txv but the bottom freezer the coil sensor is on the coil ,the txv on the freezer was replaced I don’t know if they forgot to clamp the sensor at the txv or not ,but we’re the coil sensor supposed to go ,on the txv or the coil ?

[@NorCal-refrigeration]

In the coil for defrost cono

[@lorenzoontiveros7875]

Nor-Cal Refrigeration & H.V.A.C thanks a lot have a great weekend

[@atch_n_sons]

Good video Dave🤙 I like to pop the sensors in ice water and look for 32k @ 32*f. Ever off I replace

[@OcRefrig]

Yea, Nice trick ! easy to remember !

[@marcelo9445]

Thank you sensei- Grasshopper

[@omarrc9628]

That looks like a great meter.. what stores carry it?

[@NorCal-refrigeration]

New version amzn.to/46cA7TR

[@johnpaulsonjr7214]

Where do you get the parts book at the end?

[@JTJUlian]

what if the pipe coming out of the coils that freeze is frozen?

[@drcolster]

Hey Dave, does that Traulsen electronic t/stat have a cabinet probe calibration parameter..???

[@NorCal-refrigeration]

drcolster I don’t know. But the sensor has a specific ohms valve at a specific temperature and it’s has gone bad.

[@drcolster]

@@NorCal-refrigeration Yes 100% the old sensor was bad, but the 2nd hand one you put in,you may have been able to calibrate it to be correct.. but your getting a correct new one anyhow.. top job.. one question, washing condensor, can you get water in the electrical box underneath..???

[@NorCal-refrigeration]

drcolster water yes. I didn’t understand your 1st question. Makes sense now. 👍

[@otishanna5056]

Great work

[@HVACRDUDE]

Also love the traulsens!!

[@davidhodgin3792]

32k ohms in ice water is what you are looking for. 2014 sensors go bad. Mostly the coil sensor. Latest version will have GB on label. Replace both. The coil sensors go bad much more often.

[@LEXSAN775]

How did you put it in manual harvest mide though ?

[@NorCal-refrigeration]

Scroll to ds then select y

[@LEXSAN775]

Ty Ty Ty.

[@LEXSAN775]

What does ele los and err mean brother I just finished HVAC/r school and working at nugget casino in Reno nv and I have so much to figure out. By myself wtf?! Lol

[@Akvan79]

Never worked on these units. How complicated are they ? Are parts easy to find ?

[@lorenzoontiveros7875]

Thanks 🙏 a lot we have a couple of those on our place I known how to trouble shot them

[@jacobcolby1423]

Where can I find literature to navigate the menu’s on those? I’ve looked on the traulsen website and haven’t had any luck.

[@nickanto]

Look up the manual for the controller. Intela Traul

[@eastlandgin]

Why are Traulsen Refrigerators considered by some to be better than say a Beverage Air or even Turbo Air? Better components, less failures, better design?

[@atch_n_sons]

They are one of the only to use a txv, and without a receiver. Their stainless lasts forever, and easy to work on

[@NorCal-refrigeration]

Dan T they are rebuildable and last.

[@b16civic93]

I'm in Baltimore Maryland its 30s and windy... alot of no heat over here!!

[@NorCal-refrigeration]

Vernon F get some. Sounds busy. My daughter goes to Hopkins

[@Jeepjones85]

I’ve worked on a few of these and I have looked in the manual and can’t seem to find out what that left little control is mounted about half way up by the condenser looks like it has a phone cord plugged into it. Any idea what that does ?

[@NorCal-refrigeration]

It’s for fast programming and troubleshooting with a controller or lap top I believe

[@aircooledtx]

Good fix on Saturday, to get them cold.. Dave

[@NorCal-refrigeration]

Michael Lee thanks Michael

[@nickanto]

These sensors are notorious for going bad. I've probably changed a few hundred in the last ten years. I usually swap out both the cabinet and evap sensor while I'm in there. They both will fail eventually.

[@russell4309]

Have you ever had trouble finding the service and parts manuals for specific traulsen or hobart reach-in models?

[@atch_n_sons]

Call Traulsen they will email you everything you need, good tech service

[@NorCal-refrigeration]

JustRuss nope google they come up. Also there tech support is top notch.

[@russell4309]

Thanks il try that

[@articairrefrigeration9142]

Good show, what catalog was that?

[@NorCal-refrigeration]

Scott Lorenson refrigeration hardware supply

[@klgenus3]

My question is where you got that book

[@NorCal-refrigeration]

Whole sale house that’s sell that brand of equipment. And google on your smartphone

[@socalcasedog]

Worked on a few of these. 99% of the time its 1 of the temp sensors. I always replace both at the same time

[@NorCal-refrigeration]

Casey Smyth I have both. 👍👍

[@socalcasedog]

@@NorCal-refrigeration the things we learn in our field......wether the common sense way or the hard way lol

[@jddilligaff]

as always good content .

[@mwheatingcoolingllc5311]

man i work on a lot traulsen how’s can i get one those catalogs just starting my on business

[@reedapplianceservice937]

Just got my RHS catalog ( www.rhsparts.com) in the mail today. The NorCal Dave bible. On my way to never calling tech support.

[@DanO181919]

Reed Appliance Service How do you request the catalog? Thanks.

[@MsJain123]

which brand coil cleaner you are using ?

[@NorCal-refrigeration]

jain toms Home Depot stuff in a can.

[@kevinlarson3996]

Wondering if you have an app or website to get equipment manuals?

[@beardowns8050]

Partstown and heritage parts is good for commercial units.

[@kevinlarson3996]

Thank you

[@davejohnsonnola2758]

Partstown site seems easier and more reliable than Heritage , but Heritage has had better prices on parts I've needed so far. Try and get make and model from customer ahead of time so you can download manuals ahead of time.

[@jarrettholybee7199]

What book is that?

[@NorCal-refrigeration]

Jarrett Holybee refrigeration hardware supply

[@ryanself3763]

Will you message I’m new to these and I have 30 of them to maintain but have background in hvac for 10+ years please lmao

[@TheGhettoLobster]

next level

[@hemicoupe2539]

Always the evap sensor

[@KB-wq5bb]

Sunny and in shorts, that sucks I'm in 28° weather for next 4 months

[@NorCal-refrigeration]

S. Carolina maintenance oh man where are u at?

[@KB-wq5bb]

@@NorCal-refrigeration close to clemson sc

[@NorCal-refrigeration]

S. Carolina maintenance I had no idea you had cold winters there, I always thought it was mild in winter in SC.

[@KB-wq5bb]

@@NorCal-refrigeration some days are ok but we do get to 0° mid winter. Enjoy the warm weather. I have to wait until April or may to warm up.

[@capitolrefrigerationheatin7501]

I was at almost 0 on NY, I want to move to Cali

[@TheBoar6767]

Show more detail

[@NorCal-refrigeration]

Make your own channel 🤘⚡️🤘✨✨✨

[@harrydickson4575]

👍👍👍

[@TheBoar6767]

You cut out the only part I needed to see pmfao

[@OcRefrig]

Good video ! good information right here. 👍

[@throttlebottle5906]

traulsen pronounced ""trolls-on" :))

[@sjefoekel6058]

SUPERTECH!

[@rocker8692]

Iceotosis

[@throttlebottle5906]

who would have guessed a failed "chinesium spark-tronic anti-sensor" lol

[@kenb1918]

First! Lol