1000hp 4 Piston Turbo K24 STREET Engine Build and Dyno

1000hp K24 for the street? 4 Piston Racing built one and backed it up by running it on their engine dyno. Get these rods here - boostlineproducts.com/collect...

[@alphaomega8713]

I can imagine Toretto saying “Not a bad way to spend $10,000”

[@jacobhoke581]

If its only $10,000 thats cheap as dirt for 1000hp

[@johnd9357]

Yeah. Much more than 10k.

[@turnip5465]

@@jacobhoke581 10k for the engine + another 6-8 for the turbo system/intake manifold etc

[@David-gl7rg]

Add the transmission and differential.

[@samp6162]

And fuelling, ECU ect ect. It's a $40k setup at least.

[@waugy370z8]

Over 250hp per hole? Pretty damn impressive. Especially since you can calm it down for a daily driver if you really wanted to. Awesome build 👍

[@waugy370z8]

@Adam Fears Thats just an awesome build.

[@waugy370z8]

And rock solid internals.

[@songklehkids3042]

1 piston 250 hp. Amazing

[@MsJoaquin01]

Songkleh Kids 600cc, r6 turbo? More...

[@songklehkids3042]

Woww

[@MaxCaissie]

@@MsJoaquin01 he's talking about power per cylinder

[@phantommedia9964]

One piston makes more hp than my BRZ lol

[@ACommenterOnYouTube]

250 hp per piston at 33 psi = high compression pistons with super fuel ...

[@edgargarcia4545]

Don’t let this distract you from the fact that Hector is going to be running 3 Honda Civics with spoon engines. And on top of that, he just went into Harry's, and he ordered 3 T66 turbos, with NOS. And a Motec exhaust.

[@Make-Asylums-Great-Again]

Cringe

[@chrisdelarosa4120]

Is it bad if so why?

[@byjohnmrdg4056]

Fast Furious

[@AndresGarcia-uz2jq]

lmaoo , read it in brians voice too 😂

[@christophercasey8833]

Hahaha 🤣 I’m dying

[@mattyi91]

If I ever get rich, I’ll keep y’all in mind

[@arcadiagreen150]

15 gallon fuel tank should last about 7 miles. Not bad

[@MehemLED]

That's enough for few races.

[@zombie22_]

The best part is if you got a good tuner, and you want to drive it on the road,you could probably get well over 20mpg

[@joelstatosky1817]

@@zombie22_ . Because of the magical vtec. You could also have different tunes for different situations, one for daily one for racing

[@nosurrendergarage124]

When people with no clue comment lol

[@shorty808100]

15 gallons should last about a little over 1/4 mile in a V8 I would imagine this four cylinder would kid burn 7 1/2 gallons a pass if it were mine but I would be running a carbureted engine with a high flow fuel pump, instead that EFI crap you guys run now a days with a carb it could make a lot more than 1000HP IMO if you wanna build a race 4 banger there’s three choices of blocks a Mitsubishi, Toyota and Nissan I like Mitsubishi the best I had a 2.4L Mitsubishi bored 60 over sleeved at 11-1 compression had 320 psi of compression per cylinder ran a high performance 2 barrel Weber carb that thing was bad ass 0-60 in about 2.5s 0-100 in about 4s it would burn the tires off if I let it and it was N/A never got to take it down the track though sadly no way I coulda ran boost on it woulda blown the head gasket every run probably it got the gas mileage of a large V6 after I built it, boy was it a fun lil truck, I wanna go wild and build another one except with boost this time I’m gonna put a 14-71 supercharger for a top fuel bike on it and probably run it on methanol it’s should do 200+ easy in the 1/4 maybe I can brake the 4 banger world record for fastest 1/4 and MPH cause I’m going with a 4-5 speed lenco tranny

[@TolandTheShattered]

Boosted Boiz, where ya at?

[@KodiaKSE]

@@Theguitarskater1 still making more power than anything you are driving =)

[@connoisseuroftigolbitts]

Theguitarskater1 You must be watching the wrong boosted boiz fool

[@Ghostmap]

Very interesting video, such precision in the make up, congrats !!!

[@hondacrx0]

Awesome Build!

[@christianreyes9115]

Omg that’s some clean shit , block and head looking like it came straight outta the factory brand new.. and omg 😮 that revving sounds amazing

[@vasilistyper7882]

Honda K series its amazing I drive an Ep3 n/a with K20A2 and it is awesome.

[@noegarcia7491]

such a high quality video for such a small channel

[@haddockracing]

Worth every penny.

[@MrIntercoolers]

Great vid. Thanks

[@MrCTruck]

Mad respect for the amount of knowledge and experience and passion this dude has for these motors and his customers

[@boeing737d]

Dayum!! My friend would love to have this swap in his EG6. Gone.

[@kseriesdan9722]

What a work of art. Now to win lotto

[@nmwracing]

Nice job

[@wonkybomb1865]

They build awesome motors but if you want a whole built long block from them top to bottom it doesn't come cheap but you get what you pay for that's for sure. If you're on a budget do the bottom end yourself and spring for the 4Piston head at least, they do it best. Just make sure you pick the right one for what you need they have so many different options from street to drag or both and even water-cooled or closed deck for the insane hardcore for that matter.

[@elia2441]

Damn I wish I could have these guys build me and engine, my Honda got jacked up while I was deployed😭

[@THEMAN03100]

I just got back from my tour in Somalia I boosted as soon as I got home 😁 09si. If you want you can follow me dee_fg2

[@fredc8618]

@@THEMAN03100 whar were you doing out there?

[@THEMAN03100]

@@fredc8618 providing security for marsoc and small airfield

[@tunerworld]

I’m getting this for the Civic!

[@thisnotmyrealname]

Great! I'll get one for my daily class commute please.

[@Itr-tv7kt]

wow.. i need this motor in my itr !!!

[@wombatonsteroids]

Would be nice to show a dyno plot at the end (although you can see the numbers on the monitor towards the end of the video). Crazy results as always from 4P. Doesn't get any bigger/better than that.

[@TexasP00nTappa]

NA power just upgrading internals can get pretty high depending on the setup. I forget what channel(it may be this one) that made 500-600hp on a k24a2 that was NA

[@top-notchfrenchiesofhousto6345]

I need one of these motors for my go cart

[@ianeyolfson6525]

That seems like bomb just waiting to go off

[@outofmind9222]

This is damn impressive. The k24 is Hondas best motor

[@alomechanthasinh4079]

It's really Out of Mind 😉

[@outofmind9222]

@@alomechanthasinh4079 facts

[@O.A_Ih4teno0bs]

My money is on k20 i think the rod ratio on k24 not going to last as k20 I think best combination is the destroked k24 with longer rod would be more reliable and also still great power

[@Concepcion40]

Need this

[@rokanresho8817]

Nice job and nice video just I want to ask how long garante for this machine

[@mohammad2001m]

Looooooove it 💙💙

[@RobHTech]

awesome vid. Are they interference engine when built?

[@sonichuizcool7445]

This engines life is measured in seconds.

[@Iseenoobpeoples]

It will last multiple seasons of racing.

[@TyinAlaska]

I love cars, but I've never taken on a project car. I've got a tuned Audi S5, and I love it... But I'm thinking of getting a 4piston engine with a few drag cartel parts, mating it to a ZF 8HP, and swapping it into an MX-5 ND. There are a few other upgrades I want to add to the Miata as well; upgraded infotainment, custom carbon fiber interior parts, chassis stiffening components, wider track suspension parts and upgraded coilovers, pilot sport cup 2 tires on Rays TE27s, larger breaks, and OEM-look molded fender flares - all being the main components on my mind. Now, I know that the 8HP is an automatic, but I'm chasing a car that I can effortlessly throw around twisties and tracks, but which will also be efficiently comfortable on the highway. While you may have your opinions on styling and particular parts with similar capabilities, what do you think of my potential build list? Do you think it could be a recipe for success?

[@clifftonsolis651]

Now attaching this to a crv awd transmission and shoving into a 90s civic would be ultimate

[@becca8039]

ok I had to stop the video for a minute..... 1,000hp and it still has i-VTEC?

[@mcfriendzzone5651]

MO POWAH BABE

[@pudu4803]

@@mcfriendzzone5651 A MORE PAWAH BABYY!

[@Steez510]

😂

[@uncomfortabletruth1548]

It goes from a 12v to a 16v instantly.

[@dompettipis9454]

@@pudu4803 LIGHTNING LIGHTNING LIGHTNING BUFFHORSES OMAGAHHH

[@Mrcrowntown]

Makes me excited for my 2.7l Toyota block to get here 💪

[@mikeperez1507]

One can only dream of one day having a fully built 4piston engine

[@robertrose5339]

The same here I love those engine

[@robertrose5339]

Just wondering how much is that engine with a big turbo on it what's the price on it?

[@pietronegretto]

Oh yes, the perfect daily engine

[@bighomieJ5X]

The 2 dislikes are Nissan sr20 owners 😂🤣😂🤣, that's a beautiful engine , I kno where 2020 income tax check is going ...🤗🤗

[@wilfreddiazvellon7896]

BighomieJ5x - pure jealousy of them knowing that a Honda will kick their sorry behinds very very badly.

[@daynight1921]

Lol ? Sr20 have better engine

[@bighomieJ5X]

@@daynight1921 to each it's own ....

[@ibancitoChavez]

I want to boost my sr

[@djscottymaxx]

Day Night Honda guys in denial like Ford guys, always talkin they shit up like nothing out ther better🙄

[@seogabonotjah6555]

3:05 Vtec kick in

[@Marrque]

Great

[@wellingtonalbuquerque5338]

Top parabéns

[@edgarpadron9406]

I’ll take one ☝🏽

[@igor-rp5mw]

Just a story for entertainment made from the comfort if IT seat = { "At 4 Piston Racing we got it building for over a decade and we gonna show you a 1000hp Honda k24 engine". "At another geolocation there was a guy gaining knowledge and experience tuning EJ engines that many people hate. Later he called him self BBR tuning. He started showing to people that correctly tuned and properly maintained stock EJ can reliably be making 500 whp for long time and 600-700 whp less reliably but still for significant time and with torque figures up to 200 less than hp. In the end of 2023 he showcased on his DynoJet an unopened 100% stock from the factory Subaru EJ25 with stock STI drivetrain hitting 700 wheel torque and just over 1000 wheel horse power. Taking this engine off the car and showing us it is stock . No damages ! Engine intact, awaiting what is next. Immediately after he, BBR person, puts in his own built EJ 25 stage X and hits over 1000 wheel torques and 1400 wheel horsepurse while xeddy triple disc clutch is giving up. He, BBR person, can not wait for the track season to open and prove to himself and the others in car community what a stock and built EJ engines can do." }

[@mattwilliams2637]

Where can I find these sleeves and copper o rings? And did you have to bore out the cylinders when placing the sleeves in?

[@turbovolvos40]

I wonder how many of those parts are really necessary for 1000hp. Awesome build all the same.

[@4pistonracing]

The turbo is doing a lot of the work....making power is one thing. Making it last is another. We use this engine in 12 hour LMP2 cars at about 650hp. This particular one is in a Time Attack Lotus at 950hp right now.

[@calebnichols2742]

Does the K24A4 need machining to fit the boostline rods?

[@mcfriendzzone5651]

Hertlife liked this video

[@joem3713]

Im a bmw guy But a honda guy at heart. I have my k swap ek sitting havent touched it for 2 years but itll get its time and when it does boy let me tell you haha

[@Bytrl]

Ill give you 4k for everything but the mounts if they're not ekk2 hasports w an eg subframe, axles, or ecu. Paypal?

[@cletusvanndam1058]

Well back to the drawing board

[@tonymedina9339]

Do you sell engines like that? And what do they go for? Hopefully under 20k

[@willhull9677]

Put 4 of these in a car, each wheel gets its own one. Lock and load baby!

[@CrAzZyTheCodingBoss]

4000hp beast

[@murphyspell7125]

H1 Hummer

[@reconalphabravo7]

Will these guys do the swap and tune or just crate and send you an engine?

[@hectorpatino7113]

Why isn’t the vtc actuator used then? Curious to know why it’s not connected

[@rahadyanmuhammad271]

Hi. I newly interest with automotive I am amaze with your buildm congrats 👍 By the way. I still don't really get a point. Why some engine could go up to 500++ hp some other just below it. Even with higher CC

[@strikermaximus365]

Do the pistons have oil consumpstion holes.

[@b.i.g.s5291]

If I hit my parlay tonight I know where I’m going with my money

[@GeorgeGCChen]

My dream is to buy a civic body and ship this engine to my home and put it in the ek and boem! One hell of a civic?

[@chon4413]

I will love to see that engine race a 2arfe

[@TM-dm8zx]

😍

[@kevinp5639]

Dreams 😚

[@Lunatech04]

Is it the drag race motor on your website?

[@glennsilverio6632]

Is the specs provided somewhere? Size of the cylinder, head port size, etc. Do you know where it could be provided?

[@MiggysAventures]

I want Their K24 N/A Street engine that makes 360Hp🥺with K-Tuned parts in a Teggy

[@sk8erboy551]

Any DSM builds?

[@monkbyblood]

Sorry what angle you running that cam?

[@larky6201]

Boostedboiz fans where you at?

[@kzarnold3678]

Now I know how to pronounce the retainer and valve spring. brand name

[@amyasseektruth8246]

You guys just pushed the bar up - way up!!!

[@MannyDelReal]

This is old news 😂 a f22 single cam is pushing more then this with a stock block not bored just pistons and h beams stock head 😂

[@amyasseektruth8246]

@@MannyDelReal insane man

[@amyasseektruth8246]

@@MannyDelReal I love how people hated on Honda 4 years ago... Rice this rice that... Little did they know.

[@ingodwetrust9153]

Really nice built love it!, There’s no way Wiseco rods be my first choice for 1000hp

[@strongme80]

What rods would you run with?

[@theflash6611]

Hello but just wondering can I buy one but supercharged instead of turbo?

[@keithcannon3682]

I would like the part number for those pistons if you don't mind. I am porting my own k24a2 head,running factory cams,using same boostline rods, same intak3 manifold. I haven't decided on an exhaust manifold yet. Regardless it will be t4 twin scroll with dual 38 or 44 wg's because my turbo is the gt3582r. I am not conviced I need sleeves. I have seen factory short blocks making over 700whp. This engine will go into a 2004 rx8. Since I am running the rx8 transmission and diff I don't see where making over 550/600 whp will be worth it. Those factory parts will probably not survive. Anyway...the part number for the pistons would be great. They sound exactly like what I am looking for. Oh...and those boostline rods ...they are awesome. Please suggest what sleeves you would get if you were in my area. I am near Charlotte NC Thanks for your time.

[@DJToneRI]

No mention of which fuel they used? No mention of compression ratio? Also, why isn't the VTC solenoid hooked up to anything on the engine dyno? They retained VTC, but didn't use it???

[@madpower1977]

Can you ship to portugal? Engine price plus send away how much please?

[@josephharief9062]

like it, any suggestion what transmission suitable for this power?

[@wb5mgr]

And therein lies the riddle...

[@andrescruz4291]

How much does it cost to get a fully built k series?

[@venividivicipartita3750]

Is there a price and parts list for this build?

[@randyvelez6010]

Not bad for a daily driver

[@787brx8]

Wonder how much power they could make by using my prototype? The prototype makes it possible to run full timing advance on my Mazda Protege with no noticeable knock or pinging. I made A video showing where the timing was and where it is at now, with A few full throttle pulls at the start. More tests are on the way.

[@franciscoribeiro6223]

What should we use for transmission in an 1000hp engine like this. Just reenforce a manual oem transmission works?

[@franciscoribeiro6223]

@Sergio Aguirre thanks

[@davej.1762]

I wondered I know it's a smaller engine and it's souped up pretty good is it any good for on off-road vehicle?

[@davej.1762]

@@playandgrowtv9846 I have a Ford Explorer but I want to keep it as a four-wheeler vehicle and a family vehicle but I wanted it to have some balls. And it's about ready for it. So tell me what would be the best engine transmission and drivetrain to put in? I wanted to find a way you put an IROC Z28 engine in it but I'm thinking I'll find a way 2 twin turbo it or supercharged it

[@effsea1233]

My 90's model Civic only ran on 3 cylinders, because I was poor. I used JB Weld to hold one of the plus in, again, because I was poverty stricken. I wish these guys would give me a motor. I could be an ambassador for them, and then win races, and score lots of women, and be famous, and party like Josh Duhamel. #FreeRawanda

[@alexvickery6153]

Images this in a classic mini, fiat/Abarth, vw bug or kombi!

[@TheBlaert]

It would be sacrilege especially the Fiat/ Abarth. As for the VW's, a good 1.8 20v Turbo will make as much power as this

[@markrodriguez2137]

Bravo.👍I cant wait to buy one.Hope you take credit card.

[@LNukem256]

What you gapping the rings at

[@gracemapanao4173]

Build a mid enigne honda S2000 with 1000hp K24 and 7 speed gearbox

[@ob1kanukie]

Can't wait to fire up mine soon!!! #KILL

[@billrussell7672]

What Honda trans will stand that beast

[@robertelser2889]

How much to purchase built and ready to drop in?

[@kzarnold3678]

Science

[@Azzmelater]

I'm really upset at the fact that I sold my 06 rsx type-s two years before this engine became such a popular way to make power.

[@PEREZCHOOCH]

The next big thing is going to be the K20C4 engine found in the 10th Gen Honda Accord 2.0T.

[@itsjussjerry]

All that and will still get dragged at racewars by Hector's civic with a spoon engine, nos, t66 turbo, and motec system exhaust.

[@mrfm-qu9yn]

*TAKE MY MONEY*

[@followthegrow108]

1000hp 4cyl street engine. Wow. Anyone got a video of a car with tjis engine in it.

[@Drake5153]

What would this engine make roughly on 91/94 octane? I could see maybe 700, but 33psi for 1000 sounds like e85

[@bananaman2184]

I’m wondering the same

[@shipshrekt2156]

116 race fuel time

[@pluviamachina3583]

Where can I buy this?

[@esco1578]

I wonder how many miles this would last before a catastrophic failure. If driven responsible

[@lavozdelaconciencia847]

Where you guys located it

[@90slegends49]

What is comparison ratio?

[@EthanDavis.w]

So he's saying you can toggle the power on and off? Like daily drive it and then flip a switch when you want all of that boost?

[@MmeDesgranges]

With a Motec M1 setup you can setup various boost management strategies .. like say a rotary dial .. or a toggle switch .. or ..