#146

Рет қаралды 6,617

ToltecMerc

Күн бұрын

Пікірлер: 76

@Samsemillya 8 ай бұрын

That’s why you have a thermal cam, saves a lot of time. Nice job as always

@ToltecMerc 7 ай бұрын

Very true!

@TechTronics7 8 ай бұрын

Reballing the wifi chip with 2balls, without a stencil, you are Master.

@ToltecMerc 7 ай бұрын

Thanks! Just working with what I had on hand.

@glenndavis8255 8 ай бұрын

That is awesome! I have seven PS5 motherboards have shorts and I cannot find it. It’s driving me crazy. Your videos really help me a lot trying to figure it out. Thank you!!!

@ToltecMerc 7 ай бұрын

Glad I could help!

@marinaq5103 8 ай бұрын

We are not watching a casual repair, we are watching a thrill story of resurrection ladies and gentlemen.

@ToltecMerc 8 ай бұрын

Thank you!

@yoho2chn 8 ай бұрын

I believe you have injected voltage into the ground side of the cap instead of the 3.3v side at 14:27 , otherwise you should find that short cap instantly without removing wifi module

@ToltecMerc 8 ай бұрын

You are absolutely right! I did not even notice that!

@yoho2chn 8 ай бұрын

@@ToltecMerc haha, I thought you would notice that after you removed the step-down ic but you moved on the hardest way

@ajaks7636 8 ай бұрын

Sorry for all your pain and suffering on this one. It's amazing how 1 tool can make all the difference. Great Repair and Video. Have a Great Move! Thank You.

@ToltecMerc 7 ай бұрын

It would have made life much easier. I need to stop working on consoles until after the move but I can't seem to help myself.

@ajaks7636 7 ай бұрын

@@ToltecMerc When it's fun, it's addictive.

@MasterJediSean 8 ай бұрын

I'm glad you found your way out of of this rabbit hole, Having a Thermal Camera is an asset when troubleshooting shorted components. Well done my friend! I'm looking forward to your next fix video which may be a while, at least until you get unpacked and setup up a work bench. ttyl. Cheers!

@tony359 5 ай бұрын

‘Never pack the thermal camera’ ;) How boring the world would be without capacitors… 😂

@ToltecMerc 5 ай бұрын

Everything went into a box. I still have tools in a box somewhere. PS5 caps are a lot worse than PS4 caps.

@RustyRaindeerRepairs 8 ай бұрын

And that is why I bought a mobile phone with thermal camera built in😅 Great video as always, interesting and educational. Thx!!

@ToltecMerc 7 ай бұрын

I am in the market for a new thermal camera myself.

@davidstrider2007 8 ай бұрын

Another great repair! Kudos sir!

@ToltecMerc 7 ай бұрын

Thank you kindly!

@n4_ku 8 ай бұрын

Moving sucks. I hope we will see your new place in the next video.

@ToltecMerc 7 ай бұрын

Yep. It will be late May before I am settled in my new place.

@roymarevelous2941 8 ай бұрын

Another great repair video! Always love watching your fault finding techniques. Can I ask what hot air station you're using?

@ToltecMerc 7 ай бұрын

Thanks! It's a Quick 861DW. I have the 120V version.

@jonathansandiford4137 8 ай бұрын

Nice one m8. Thought you would have used the millivolt trick you showed some videos back, to try detect the short. Thermal cams are indeed invaluable tools.

@ToltecMerc 7 ай бұрын

I didn't think about the milli-ohmmeter. I should dig that out.

@haakmeer 8 ай бұрын

great repair again, and 10 K olmost there

@ToltecMerc 7 ай бұрын

Thank You! It's getting close. I'm looking forward to it!

@pjhb_microsoldering_portugal 8 ай бұрын

Another great video 😊👍 Thanks for sharing your knolage. Greetings from Portugal 🇵🇹

@ToltecMerc 7 ай бұрын

Thanks for watching! Greeting to you and I wish you success in your repairs as well!

@amin031 8 ай бұрын

Amazing work as usual.

@ToltecMerc 7 ай бұрын

Thank you so much! Glad you enjoyed!

@2DSwagGod 8 ай бұрын

Nice one again. btw what camera do you use for overhead shot?

@ToltecMerc 7 ай бұрын

Mokose C100

@screen-protector 8 ай бұрын

We had not long time ago EDM-020 with many faults. First of course F7002 blown, next A2 IC behind it was shining under thermal camera. Once removed, WiFi module started giving a heat. Once replaced with 0.76mm balls from a 2nd PS5, we had no sure, but one more fuse with 0603 cap 22uF or 47uF as well. Only by replacing all of it, the console went back to life. I did an explanation video, but not from repair. P.s: one Polish youtuber and SteveBe told that 0.76mm are fine. But that Polish guy on his superb microscope was showing the size of 0.96mm I think those balls for the WiFi.

@ToltecMerc 8 ай бұрын

I have used 0.76mm and also (2) 0.6mm balls on the WIFI. On this repair, I used two 0.55mm balls as my others were in storage. It worked just fine. Thanks for watching!

@screen-protector 8 ай бұрын

@@ToltecMerc Thank you for a prompt reply. No harm in watching, always a pleasure, but it's a shame that sometimes I have to skip to watch it. I'd need 2nd life to have enough time for watching though :D.

@hh-vq3cz 8 ай бұрын

Thank you for your informative videos. Would you try microscope from the first the videos, so, we can see better which locations are tested.

@ToltecMerc 8 ай бұрын

I will try to show the microscope when probing. Thanks for watching!

@CarlosGarcia-d3e 8 ай бұрын

I enjoyed it all the way. It was very fun* and educational at the same time. Thank you very much for sharing. Device solved. All the best. (*) PS: (10:05 - 10:07) So, the "guilty" component should be shown by raising his hand as in a classroom roll call? lol ... Well, how can you not agree with that? Sir: Please transport carefully, that is, your person first, in your own car, and then the other, that is, take your time because we want you back.

@mohindersembi7647 8 ай бұрын

Wow 👌 excellent 👏 excellent 👏 it's amazing how you do it 😊 master of the master 🙌 😻😻😻💪

@ToltecMerc 7 ай бұрын

Thank you so much 😀

@stetofix 8 ай бұрын

Nice fix. I would have soldered the wire for the injection on the other side of the cap. :)

@ToltecMerc 8 ай бұрын

I like to test ground thoroughly.😁

@lestermoreno9437 7 ай бұрын

I have the same issue but board 020 in the 1.80 V rail. my mistake was I use a new thermal cam that didnot work well as my other one instead of double check with both, I confident 100% in my new one, big mistake. that show me the WIFI IC I removed it cause it was getting hot but it wasnt the culprit it was a big cap in the 1.8V nearby the SB and that line is under 200ohms and my meter show me short too in continuity mode another mistake cause was a bad reading cause was hot yet. what solder ball do you use for that WIFI IC?

@ToltecMerc 7 ай бұрын

I used two 0.55mm. Sometimes I use 1 0.76mm or two 0.60mm.

@Alpochino-service 3 ай бұрын

Awesome Master!👍

@argee99 8 ай бұрын

Loved it. Thanks...

@ToltecMerc 7 ай бұрын

Great! You are quite welcome!

@Samsemillya 8 ай бұрын

I’m always wondering why specifically the same caps fail, aren’t those caps just filtering caps? Why would they fail?

@ToltecMerc 7 ай бұрын

I think they used some low quality ceramic caps. It could just be a bad batch but it happens so often. I wonder if they will change suppliers after so many failures. Probably not. Sony wants to make these as cheaply as possible.

@Can3Fix 8 ай бұрын

It would be easier with a thermal camera, but...well done! 😎👌👍🏻

@ToltecMerc 8 ай бұрын

Very true. Mine is in storage. I need to look for a newer/better one.

@Can3Fix 8 ай бұрын

@@ToltecMerc I'm looking at my first one and I think it will be InfiRay P2 Pro, just wondering which version IOS or Android.

@Console_Tech 8 ай бұрын

Another great repair, why using 2 balls instead of one.

@ToltecMerc 8 ай бұрын

I normally use 1 x 0.76mm balls or 2 x 0.60mm balls. My other solder balls were in storage. I used 2 x 0.55mm because I had them on hand.

@Console_Tech 8 ай бұрын

Oh that's why 😊

@Earthling247 4 ай бұрын

Watching you do needless things after needless things was an odd experience. I was wondering if you had done this work before. Now I learned not every repair tech has the same approach. Some times 3 right turns equal a left turn.