1989 Evinrude Yachtwin 6 hp outboard

  Рет қаралды 1,268

The Small Engine Guy

The Small Engine Guy

11 ай бұрын

Trying to figure out if the parts motor I bought is a fixer or really is a parts motor

Пікірлер: 5
@wearzymaan1541
@wearzymaan1541 10 ай бұрын
Great video, looking at one now. Asking 250, thanks for the heads up on lower end.
@donk499
@donk499 9 ай бұрын
It's strange how it sounds "OK" while running, but has a definite clunk while rotating by hand. I'm wondering if perhaps something is wrong with the gearcase making it clunk like that. Probably the powerhead, but possibly the gearcase. Oh yeah, forgot that the upper bearing seems to be sloppy as well. Wonder if this thing spent some time under water, and internals got rusted... The "throttle cracking screw" may have been in too far causing that roller to be so far off the cam as well. And yeah, watch out for those damn plastic cams with the little set screw to adjust WOT, they will bust like that everytime when you try to advance them. In this case, that cam is not available separately, you would have to replace the whole retainer/cam assembly, which is quite expensive. Such a shame, would love to know exactly what happened to this thing. Oh well, plenty of good parts to donate to other engines. I'm a two stroke guy for sure, worked on these engines "back in the day", when they were brand new. Don't listen to silly criticisms like that, always check everything simple you can check...
@thesmallengineguy6924
@thesmallengineguy6924 9 ай бұрын
Not completely sure about this one. Definitely wasn’t right and as much I feel like I should have pulled it apart to investigate these models (4,5,6,7.5 and 8 hp) are getting hard to find parts as you said. I ended up selling it to a guy and told him what I had found. It was listed for sale the next morning for $600. At least I can sleep at night. Thanks for watching.
@donk499
@donk499 9 ай бұрын
@@thesmallengineguy6924 Some people have no scruples at all. Unfortunately, he probably sleeps just fine...
@chadhall9606
@chadhall9606 2 ай бұрын
I have same motor extra long shaft ran fine went to start it when I was ready to leave would hardly start when it did couldn't throttle it up bogged down and die took air box off was alot of fuel in it ant ideas
1970's Evinrude 6 HP; Various Repairs
1:18:41
Brandon's Garage
Рет қаралды 76 М.
Johnson Evinrude 6 HP outboard carb cleaning (1986-2001)
15:06
The Small Engine Guy
Рет қаралды 1,7 М.
DEFINITELY NOT HAPPENING ON MY WATCH! 😒
00:12
Laro Benz
Рет қаралды 21 МЛН
🤔Какой Орган самый длинный ? #shorts
00:42
THEY made a RAINBOW M&M 🤩😳 LeoNata family #shorts
00:49
LeoNata Family
Рет қаралды 32 МЛН
1❤️
00:17
Nonomen ノノメン
Рет қаралды 13 МЛН
1971 Chrysler 9.9  outboard needs some work
33:32
The Small Engine Guy
Рет қаралды 12 М.
"Fixing" Wayne's 2 HP Evinrude
50:25
Brandon's Garage
Рет қаралды 14 М.
1989 Evinrude 6hp Cold Start
2:57
Pine Lake Parts
Рет қаралды 853
Fixing an outboard that stalls at idle
29:29
Dangar Marine
Рет қаралды 269 М.
Johnson 9.9 with a big secret part 2 the assembly
39:20
Michaels Backyard Marina
Рет қаралды 139 М.
Seized Evinrude 8 HP Outboard; Powerhead Autopsy
25:44
Brandon's Garage
Рет қаралды 108 М.
68 6 hp Evinrude Thermostat Test - Cooling System Flush - THIS OLD OUTBOARD
17:35
Юный мастер стрижки 😮🔥
0:39
Citadel Shorts
Рет қаралды 4,6 МЛН
#armenia
1:01
NS Production
Рет қаралды 2,8 МЛН
berenang lagi #viral #shorts
0:12
Kakek Endo Family
Рет қаралды 45 МЛН
Всегда проверяйте зеркала
0:21
Up Your Brains
Рет қаралды 3,6 МЛН