1994 Mercedes E320 Fuel Filter Replacement

How to replace the fuel filter in a 1994 Mercedes E320 sedan. W124 Chassis, M104 Engine.

[@waltpartymiller6802]

Be sure to fit the New Copper O-Rings under bolts, on both ends. If you unscrew the fuel filler cap, it releases pressure in the fuel line & the filter fittings. Fit vice-grips/clamps over a rag & over the flexible fuel lines to diminish fuel loose. Undo the Phillips Head clamp screws before the 17 MM compression & banjo bolt fittings, for less time under the dripping filter. Wearing nitrile gloves will reduce the fuel to wash off your hands. Put a date & mileage with an ink marker on the side of the new fuel filter. Thanks for this helpful W124 M-B 300E video!

[@royharvey4401]

another first class instructional video much appreciated for your precise instructions and first class photography 1 picture is worth a thousand words

[@eallevato]

+Roy Harvey My friend used to say "1 touch is worth a thousand pictures" :)

[@davidchrishawke5849]

Mr. eallevato, Mr Yen & Co., Many thanks for your Mercedes fuel filter replacement tutorial. I do not have a E320 - I have a 1988 Mercedes 300se. There is not a lot of stuff on KZbin for my car - especially for this. I did find one for my make & model , but while okay - I still wasn't sure about some details as I'm less familiar with my car model's rear-end stuff. (This is my first gas-merc in 14 years - I usually prefer diesel Mercedes.) So in sorta' desperation (well not really desperate 'cause I'm at home - not stranded) - I searched again. Your video did the trick. Very clear - addressed my questions. Plus - I didn't break anything which is why I sought out another video even if it wasn't about my specific model of merc. Thanks again - ~cdh

[@felipearellano8783]

thank you this video was very useful, as i didn't have a clue where the fuel filter was located and this video made it so simple for me to replace it without costing me labor charges :)

[@TheBGravit]

Thanks for the video. I have a 1989 300E with the M103 engine. Looks identical underneath there. My fuel line coming from the tank runs just like yours. Over and then back under the filter. Thanks again for posting this. :)

[@malcolmlane-ley2044]

Really helpful, thanks. I wish my 98 SL320 was that clean underneath, the UK uses a lot of salt on the roads.

[@binfinit]

Awesome vid. Thanks! Super clean E320 by the way!

[@chazmichaelmichels6296]

very nice video, very clear and informative..keep them coming..thank you

[@Caylus1578]

Many thanks for this vid from france. I have a 92 (late) 320CE!!!! Great help!!!!

[@Snickerbocker]

Excellent, as always. Thank you.

[@Macaji]

Muchísimas gracias un magnífico video una gran ayuda. Saludos cordiales desde Cadiz España

[@nehuge]

For a 1994, the underside of that car is super clean!

[@hasithaprasad6817]

Nice video and very clear explanation.

[@vijaywaingankar8352]

Good work

[@xfmotorsports]

Great video, that was very helpful. Thanks

[@rushipatel7786]

great clip.

[@LucasFerreira-wv8zh]

Thanks man that was really helpful

[@skintyana421]

Thank you very much . Very help full . Good bless you.

[@jonathanmoflori4915]

thanks much for this vid !!!

[@waltpartymiller6802]

Two copper O- rings come with the new filter. The O-rings fit over the front bolt, one on either side of the 'banjo' fitting to seal that front connection. The rear 'compression' fitting gets no seals. On the rear fitting of the filter, loosen the rear-most 17 MM fitting- the other two hex fittings are fixed. This is the compression fitting and it is on tightly, so spray it with PB Blaster, or such, a day ahead of the operation. For the screws that hold the F.F. bracket, just loosen, do not remove them. Hengst is an OE filter, M-B type quality.

[@paolo-px9gm]

thank you

[@alpoe408]

Should have copper crush gasket on both sides of the banjo fitting

[@ozelot250]

What size wrenches did you use to loosen the fittings?

[@emmanuellopez3898]

Can a bad fuel filter cause the car putter mine decelerates then picks up speed and waist fuel like crazy now and ive never changed the fuel filter since ive got the car

[@Al-px9un]

Is CLK320 w208 fuel filter located at the same place?

[@Nyck461]

Very good and well made video. Just want to know if this E320 is diesel or gas. If this is diesel, this is the primary or secondary filter ?

[@amberleighlush]

what size are the crusher washers I need?

[@mikejohnson7768]

Is the 95 e420 fuel filter in the same location?

[@1djandi]

is it the same thing on w202??

[@iamher6422]

Could’ve released the fuel pressure at the schrader valve. Good vid, though.

[@Beto-yi2tx]

Is this the same for a 1995 W124?

[@Ahleen0]

Hi I’m from Saudi Arabia I need to know the location of the relay of the fuel pump of Mercedes E320 model 1993 Can you help me pls

[@oxanawinter100]

How is that old filter .... mines rusty and old and dirty yours looks like you just put it in ......and taking it out for fun lol