How to Replace Rear Shocks 09-14 Nissan Murano

Buy Now!
New Shock Absorber Set from 1AAuto.com 1aau.to/ia/1ASS...
1A Auto shows you how to repair, install , fix, change or replace your rear shocks. This video is applicable to the 09, 10, 11, 12, 13, 14 Nissan Murano
This process should be similar on the following vehicles:
2009 Nissan Murano
2010 Nissan Murano
2011 Nissan Murano
2012 Nissan Murano
2013 Nissan Murano
2014 Nissan Murano
🔧 List of tools used:
• 18mm Wrench
• 8mm Wrench 1aau.to/oa8/1AX...
• 13mm Socket 1aau.to/oAh/1AX...
• 18mm Socket 1aau.to/omE/1AX...
• 21mm Socket 1aau.to/omE/1AX...
• 1/2 Inch Breaker Bar 1aau.to/ocv/1AX...
• Ratchet 1aau.to/oCF/1AX...
• Socket Extensions 1aau.to/oAh/1AX...
• Torque Wrench 1aau.to/oqZ/1AX...
• Rust Penetrant
• Floor Jack 1aau.to/oiI/1AX...
• Jack Stands 1aau.to/ohV/1AX...
• Vise
• Wire Brush 1aau.to/ocL/1AX...
Subscribe: / @1aauto
Check out our playlist:
Nissan Murano 2009-2014 2nd Generation: • Nissan Murano 2009-201...
For More Info visit us at 1aau.to/h/PI/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@1AAuto]

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*

[@pollydor07]

Thanks with wrench size details very useful

[@1AAuto]

+SANG THONG Thanks for checking us out! 1AAuto.com

[@Strings-Of-Madness]

Anyone else notice the rear rotors are installed backwards (the driver side rotor is on the passenger side and vice versa).. Slotted rotors are designed to vent brake dust outward and away from the hub..

[@mohamedhersi2065]

Nice If i want 2 new shocks MORANO 2005 & i am in somalia how match the price plz help for this

[@funderberg]

Another great instructional video!

[@taylonr1]

At around 5:50 how do you ultimately get that nut off the top assembly? I got it w/ the 8mm wrench so that the post is flush with the nut but can't get it to get any looser

[@MichaelVeroukis]

Nice trick with the vice.

[@eddiekovalik4564]

Any suggestions if the upper strut mount welded bolt snapped in half???

[@1AAuto]

+Eddie Kovalik You will likely need to replace the strut assembly.

[@quethree]

Perfect. Thank you.

[@1AAuto]

+Michael.Espindola Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

[@natemiller4592]

Very nice! Thank you!

[@1AAuto]

+Nate Miller Thank you for your feedback!

[@devinlambert5466]

What kind of wrench is the 18mm what do you call that?

[@1AAuto]

+Devin Lambert The tech uses a 18mm wrench.

[@jserra3273]

@@1AAuto I'm guessing the question is, what kind of wrench has that deep offset where it drops right down over the nut while the wrench is perpendicular to the shock. I have a standard set of wrenches and the angle on them prevents you from fully seating them. Trying to find a better option

[@dannysautorepair]

Great video

[@1AAuto]

+danny lopez Thank you!

[@runwayray]

Thanks for a excellent how to video!

[@1AAuto]

+Raymond Mejias Thanks for checking us out. 1aauto.com

[@mugensohc2.271]

Will my 17 be same ?

[@tkrdg7885]

Do NOT try to unscrew the NUT, the nut was welded on, Only unscrew the bolt I was trying to unscrew the NUT, I was wrong.

[@hermnkiel1080]

Are you referring to the one she took off when removing the assembly which holds the damper?

[@juanvazquez3878]

Now I know where the knocking noise in my Acura MDX comes from. I didn't activate (three times) the oil and gas before installing them. Hgggrrrrrrr.

[@1AAuto]

+Juan Vazquez Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

[@jackc396]

that wrench to take off the top jamb nut... i don't have anything inset to get on it like that. ???

[@jackc396]

got it! good video and great communication. thx -J

[@tishenkolevi]

I acctually just took a grinder and cut the nut off .LOL

[@TheBmmd321]

Thorough

[@1AAuto]

+Brian M Thanks for checking us out. 1aauto.com

[@hendytendy5972]

Top stud broke off. I don’t know what to do