2003-2007 Chevrolet Silverado / GMC blend door actuator reset

[@bobbyjohn5010]

Replaced my battery and the blend doors were all screwed up. Found this post and reset my blend door actuators. Outstanding. Six stars for you. ⭐⭐⭐⭐⭐⭐

[@carlmaro]

3 days since I replaced my battery, 3 days of frustration trying to get my actuators to reset. your video worked the first time. thank you!!!

[@MN6WS6]

Changed the blend door actuator and it worked for a week. Never knew you had to do this because the video with umpteen million views never said anything about a relearn procedure. Thanks for saving me from throwing tools into the next county!

[@toneighty6913]

my 06 sierra was stuck blowing full heat and trying this reset fixed it. thanks.

[@walterkersting9922]

Nothing to it but to do it just like you said. I love how you can own a 20 year old Chevy pick up and make it run like the day you bought it if not better all by yourself and some help from KZbin.

[@perezm714]

Thank you. The HVAC fuse remove and replace saved me sir.

[@sartainja]

Excellent video, Tim. Thank you for posting and sharing your knowledge. Thought to myself as soon as you opened the door that I bet that was a really nice truck since the interior looked really great. Never would have guessed that it had over 200k on the clock. That first generation Silverados were some of the best ever built.

[@t.j.h2810]

Silverados were built long before that model came out so I wouldn't call it the 1st. generation.

[@gabrialshiverdecker9184]

Been driving this summer up until mid-june with no air conditioning thinking I had to replace the blend door actuator tried this and it fixed everything on my 07 Silverado classic I appreciate it thank you

[@andresbaut]

YOUR THA MAN!!! Did exactly what you said to my GMC Yukon XL after having to disconnect the battery and it worked lika charm! Thanks man!

[@Red_Rips]

Bought a new actuator before I tried this 😭 oh well now I have a backup. Excellent video!!

[@MultiRokusho]

Hey man this really helped me fix my mom’s rusted out Silverado. I hope I can get it looking as good as yours.

[@jesuschristgarage7064]

Can confirm that THIS WORKS . I have 2 silverados One 2003 another 2005 Both trucks when ac was on blowing cold . It would out of no where switch to the heater . I would have to park the truck , turn it off . Turn it back on and it’ll go back to ac My 2003 would do it everytime I would drive it I did the same steps he did on the video and now it works

[@cesarmeza6285]

That's bros 🙏🙏

[@primeredisbest]

That is a very nice and clean truck you bought! Well cared for too! I don't know how you do it, but you always have the best of everything! I wish I was like that! I appreciate the video! Thanks buddy!

[@rruizproductions]

After a battery change, I discovered this problem. To fix it, I put my temp levers all the way down and pulled the HVAC B fuse under rear driver side seat, for 15 seconds, started vehicle and let it sit for one minute and took care of the problem. 2006 Isuzu Ascender.

[@hardyflanagan6901]

Thanks for the great advice. The reset instructions did the trick.

[@snakeryanmaster]

Solved my problem, wish I had a guide of all these little resets.

[@howardcamp1291]

Reset mine without replacing! Thanks.

[@MRRANDOM1]

Thanks! It worked for me. My passenger side was blowing heat only, after battery died

[@buckethead2002]

Straight and to the point…Sir I thank you 👍🏾👍🏾👍🏾

[@chevylandt.v]

Cool truck my dad has a 2001 GMC sierra 2500HD 4x4 with the 6.0 and it's the beast. My favorite truck and years, they were called the GMT 800.

[@antonioguerra462]

What. Fuse you take. Bro

[@juangerson]

Wow man, I already used this very quick fix two times, thanks! 👏👏👏

[@averagecarguy961]

Thank you! This worked on my 2006 Escalade!

[@chadchapman7986]

Just saved me $50 thanks.

[@SouthernHustla]

Great video. The info made resetting the blend door effortless 🫡

[@st.denisguitars8409]

This worked great. Thank you for posting it.

[@GSXRgYpSy]

Very helpful! I'm trying to fix my ol mans '01 silverado 1500. The ac/cold air is only blowing out of the defroster. If i turn it to vent with temperature set to cold the air is HOT.. same with the feet the air is HOT when it should be cold.. the air is hot on every setting except the defrost setting. I know the blend door (not blend door actuator) is rotating as it should when turning manually by hand. I ordered a new blend door actuator in hopes that its my problem im just not sure if it is because I'm able to get cold air & AC to come out of the defroster. Any help is appreciated!

[@darrelldyer6681]

That’s a clean looking truck with that many miles. 👍

[@seanpurdy2840]

Bro, the people in the comments plus myself are at your mercy, thank you sooooo much for this amazing information, I now have defrost again ❤❤❤❤ THANK YOU SOOOOOO MUCH SIR, HOPE YOU HAVE A GREAT DAY!!!!

[@flow1180]

Excellent video it saved me $$$$$$$

[@Cwhitt23]

Thanks man!

[@SeanElliottH]

Thank you. Much appreciated!

[@adambolden4198]

Very helpful thanks a lot ❤

[@KyleBunt-t1h]

Would this be necessary after changing a bad blower motor? I've tried everything to get my controller to work but just stumbled across this. Next time I'm with my truck I'll try it

[@luckiechuckie27]

i did this and it’s still blowing from top vent any other solutions ?

[@alfredrivera9148]

Do you have a video of how you replaced that blend door

[@gmtim3840]

I do not, wasn’t really thinking about it when I done it. There are two of them.

[@TR-qr9hs]

Recharge a/c n my compressor doesn't turn on. I have to manually start it.

[@yolandaplater6444]

Please help...I have an 2002 Chevy Silverado with no heat. I bought the resistor Blower A new controller not sure if that's the name but the thing with the knobs that has the settings 1-4 and the other knob has defrost on it....still no heat

[@soksirik6337]

Will this work for Cadillac deville

[@aaronrandolph7777]

Hi there, I’m having issues with the fan speed, on the defrost mode it is really low flow, and high flow on the floor and vents. Can you help me ? Thanks

[@chuckaaron2014]

How to replace the actual blend door ?

[@cateyetrev_2005]

what if it still defaults to the defrost even after i did this?

[@dragonsbloodmoon]

I don't seem to have that fuse. I can not even find a diagram that looks like mine. Maybe you could help

[@michaelglass423]

This didn’t work for me. Any help would be greatly appreciated

[@Arsenn89]

Thank you so much

[@benjaminashley6359]

Nice truck

[@MrJunglegem]

I keep having to do this every week it seems like.

[@johnnysalinas2694]

My truck gets warm once it I stop for a while then I drive and it gets coold again what should I do

[@johnkurttate8978]

I'd say dirty radiator between the transmission cooler,and radiator itself. Mine had the same problem

[@Charliegirl2]

I was about to ask about engine light i think same sensor in mine but Came to see about actuator

[@OldmanADV]

So how did you fix ? Mine is blowing out defrost and the other vents

[@gmtim3840]

If the reset doesn’t work, you will have to change the actuator

[@Mr.ThumbsUp.]

This works 👍

[@oscarramirez1065]

If put newone not need reset nothing..??? Thanks

[@gmtim3840]

I don’t understand what you’re asking me

[@oscarramirez1065]

@@gmtim3840 I buy new actuactor if take off the old one. Not needed reset none..??

[@gmtim3840]

@@oscarramirez1065 sometimes they don’t

[@dmitry92203]

Only one actuator door??

[@larryfine4498]

This is for the hot/cold blend. Dual zone should have two, but process should set both.

[@RodknockRhett]

That's not the blend door actuator. That's the moode door actuator.

[@LegendaryLooter]

i followed this and i thought it worked, until the air changes from the front to the defrost, in like 5 secs from starting the motor, and then you cant get it to move from the defrost position. dam

[@miguelv_1055]

My climate control keeps running even if it have it off while driving , do you know what it could be

[@antoniop5889]

Thnx just bought a new battery and this happened

[@davecrockett7581]

I just reset it And now my AC doesn't kick on

[@gmtim3840]

The reset will not have anything to do with the a/c kicking in. All it does it reset the function of the blend doors. If the a/c isn’t kicking on, you have other problems.

[@davecrockett7581]

@GM Tim38 Thank you. AC worked fine till I changed my battery . I will figure it out. Thank you