Great job Nick, you make this Hybrid Job look easy.
@CarMechaNick3 жыл бұрын
Thanks Tom I do my best!
@bilalflayeh68894 жыл бұрын
Good and clean job man , Waiting for more nice videos .
@CarMechaNick4 жыл бұрын
I'll keep them coming!
@sonatahybrid4 жыл бұрын
Great video and you are an awesome technician
@CarMechaNick4 жыл бұрын
Thanks a million!
@intrepjc3 жыл бұрын
AWESOME work my dude , getting ready to remove one tomorrow , this video will definitely help me a ton!!!
@CarMechaNick3 жыл бұрын
I hope it does, good luck! Have fun! 👍
@Kam87GT3 жыл бұрын
Hi . what code you got on OBD ?
@CarMechaNick3 жыл бұрын
I have no idea but I will start to put that info in my video descriptions.
@serg_vladimirovich2 жыл бұрын
@@CarMechaNick hello. How much it's cost? Repair or new transmission. Sonata 2012 hybrid
@CarMechaNick2 жыл бұрын
@@serg_vladimirovich all depends on demand for your area
@andresolvera22433 жыл бұрын
Awesome video! Thank you for taking the time to share this. Out of curiosity what is the book hours for this job (hybrid)?
@mikejahner69433 жыл бұрын
Bro thanks for posting this video It helped me so much. I pulled tons of transmissions but never a hybrid transmission. I got to meet I was kind of scared. Everybody was telling me Make sure I don't get electrocuted cuz I could die. But I want to step by step did everything you showed the video. And what do you know. Tomorrow I will be watching the install video for the quickest and easiest install. Thank you so much so appreciative.
@CarMechaNick3 жыл бұрын
There was a lot of that being said when I did my first hybrid. Which you can really F yourself up. No worries just stay educated and cautious of what you're doing. 😁 That's awesome! I'm happy it was able to help. It's fun to do things the others are unsure of. 👍
@spartanedw4 жыл бұрын
Is there a way to test the electric drive motor out of the car? More specifically I just got a used one and want to know what to look for during a inspection just to make sure I'm not going to waste my time putting it in..
@chepa4244 жыл бұрын
Good job my friend I got a question is this the same procedure like a regular Trans a means hybrid need a special tools? ? Thanks and keep it up the great job God bless you
@CarMechaNick4 жыл бұрын
Thanks! No special tools needed. Just remove that big fuse and give it time to dissipate. Then you're good to go!
@robmattu60723 жыл бұрын
What tool did you use to remove CV shafts
@johnhenderson6407 Жыл бұрын
Thank you. Say where do you get those plugs to save on coolant?
@garagesociety9907 Жыл бұрын
Good job.
@CarMechaNick Жыл бұрын
Thank you!
@denisboss73093 ай бұрын
Is there a difference between a transmission with a plastic valve body pan and a metal valve body pan? Will a transmission with a plastic body pan fit a hyundai that had a metal body pan?
@mannymaria1234 жыл бұрын
new subscriber.....you have great camera angles...the best ive ever seen....better then eric o.....But.....your vedios should be like this one....not like the super fast ones that you created before....keep them coming
@CarMechaNick4 жыл бұрын
Thanks for subscribing! I've been trying to figure out the best way to do them still. I have a mount I'm going to be trying soon. I also have a handheld record and stop button so I want to try cutting out as little as possible. While keeping the speed consistent through the entire video.
@mannymaria1234 жыл бұрын
thanks man .....like I said your shots are super clean.....but the speed way to fast to follow comforatably....let 1 0r 2 seconds go after shot before cutting out to give us time to absorb the material...I follow the greats,,,,eric o....fordmakeyouloco and a lot of other top you tubers.....you have great camera angles.....
@mannymaria1234 жыл бұрын
I like seeing the socket spinning and you do a great job of setting up that angle
@CarMechaNick4 жыл бұрын
I'll have to check them out. Thanks I appreciate the feedback and I'll keep that in mind for the next one.
@mannymaria1234 жыл бұрын
will be looking forward ....keep them coming
@mikejahner69433 жыл бұрын
How long do you think it took you to pull it out? Great job by the way
@CarMechaNick3 жыл бұрын
Like with most Kia things I'm sure it wasn't long. Sorry I'm not sure on exact time.. Thanks!
@craigherron76963 ай бұрын
Just found out my transmission is going to need replacement. How many book hours should i expect it to take?
@ronmertes74394 жыл бұрын
Hi CM!!! Thanks for the great video. My 2012 Kia Optima Hybrid trans with 172k seems to have died. looking at installing a "used" unit. The two cars drivetrain appears to be identical, Any advice. I may still find someone to do this for me.. two many years of being under jackstands for this 63 year old... but I'm cheap and enjoy the challenge. you make it look so easy..
@CarMechaNick4 жыл бұрын
Thanks a million! You're a beast! Here in ohio its not much fun working on stands. My employer shop isn't ac and that's still miserable at times. Even with my big fans. I'm pretty sure I installed a used unit here no issues. These Hyundais are easier in my opinion. Its really not a bad job to tackle but that's easy for me to say with a rack and my toolbox at work. I'm sure you can knock it out tho! 👍👍
@FLJAMESFL4 жыл бұрын
Dude awesome job.
@CarMechaNick4 жыл бұрын
Thanks man i appreciate that!
@albert-phonseanna19334 жыл бұрын
Nice job . but it would be wonderful if were added voice on it you can still do it Great technician+ great tool= great job
@CarMechaNick4 жыл бұрын
I will consider doing that for sure! Thanks for the feedback.
@johnhenderson6407 Жыл бұрын
At the 10:24 + 3 sec mark, I can't get that connector off. Any hints?
@marilynstovall66102 жыл бұрын
How much do you charge for this
@p.krasnoslobodtsev Жыл бұрын
hi, where are you located?
@muratguler32093 жыл бұрын
Hi, Nick! I have Kia Optima Hybrid 2014. I`ve got problem with transmission and getting error msg on dash "Hybrid system error. Stop car safely". Can you help to fix it? Thank you
@CarMechaNick3 жыл бұрын
If possible I would definitely have someone qualified with a scanner check it out and give you a proper diagnosis.
@israelrios402 жыл бұрын
I didn’t see any torque converter on the video
@skatelegacy74852 жыл бұрын
after disconnecting the "Service connector" for inverter lines. It must be wait atleast 5 mins and wait the voltage to dissipate. then 2 inverter terminal must be measured by Multi tester when starting a service. Right?
@CarMechaNick2 жыл бұрын
Yeah man, if you scurred.
@Thunderroad8517 Жыл бұрын
Thanks for the video !!! Is it possible to get that trans and not pull the subframe??? Thanks in advance !!
@CarMechaNick Жыл бұрын
I always pull full subframes for trans jobs. Not sure if it's possible without.
@Thunderroad8517 Жыл бұрын
@@CarMechaNick yes I had to pull it to. I learned the hard way about the rack. From now on I will disconnect it from the steering shaft first. The corrosion in Ontario seizes the stab bushing bolts. Thank you sir.
@CarMechaNick Жыл бұрын
We live and learn!
@LeGiTiMoSiTy3 жыл бұрын
The dealership closest where I live is horrible. I have to replace my transmission but not spending my money there. Wish more companies in my area worked on this car. You can fix it if you want. I can buy the transmission and pay ya lol.
@CarMechaNick3 жыл бұрын
Man that stinks. I'm located in Cincinnati Ohio how far are ya!? Lol
@LeGiTiMoSiTy3 жыл бұрын
@@CarMechaNick I'm in Nashville. I used to live in Columbus a few years ago
@CarMechaNick3 жыл бұрын
@@LeGiTiMoSiTy Nashville is cool I used to go there when import alliance was at the speedway.
@LeGiTiMoSiTy3 жыл бұрын
@@CarMechaNick nice. My wife wants to take the kids this year to cedar point and kings island so I may just drop my car off to you lol
@CarMechaNick3 жыл бұрын
@@LeGiTiMoSiTy We are on Colerain Ave. I've never been to cedar but I love kings island. It's really close to where I live as well.
@oscarrobles12114 жыл бұрын
Que bien como se observa el desmontaje de algunas partes de este sonata, lo lámpara es lo repuerco que ha de ser el dueño, un desorden total.
@chrisdavidson45524 жыл бұрын
Are those reverse thread bolts between oil pan and bell housing? 19:30 or is video reversed?
@CarMechaNick4 жыл бұрын
Haha im still learning to edit in a way and I used to just mirror things when I would hang the camera upside down. I've since learned to rotate 😅 everything comes out lefty loosey righty tighty.
@chrisdavidson45524 жыл бұрын
OK. Thanks. Replacing trans in a 2012 optima hybrid today. Is there any programming or learning procedure required after replacement. What is the suggested transmission fluid?
@jolush12074 жыл бұрын
@ 17:47. Omg how did you pop that axle off so easy?. I have a 2013 Sonata Hybrid and I had 5 different shops tell me they couldn't take the axle off. They told me even if they were to take off the axle, my aftermarket Duralast axles wouldn't fit my car. Any guidance would be helpful. Thank you so much.
@CarMechaNick4 жыл бұрын
Is it stuck in the hub? Are the Duralast axles the wrong part number? If the part number goes to your vehicle they will fit fine. We use autozone parts regularly with few issues and they are great about warranty items. If its stuck in the hub tell them to put some heat on it. Air hammers are great but nothing beats a 6lb hammer. A hammer will for sure mushroom the axle. You have to install the nut a few threads to keep it from being to much to fit through the hub. Really hard to explain through text but I hope that helps in some way.
@jolush12074 жыл бұрын
@@CarMechaNick no the hub side is fine but both transmission side of the axles cannot be taken out. Different shops tried heating it up, banging hub side w hammer, and few pry bars. I was going to take it to the dealership but dealer doesn't use aftermarket parts. Part numbers are absolutely correct. I use Duralast gold for brakes, pads, battery, timing n water belt, etc.... I just found it completely absurd for local shops to tell me that my Sonata Hybrid doesn't "take " Duralast axles. But i seen you dismantle this car with ease.
@CarMechaNick4 жыл бұрын
Thank you! Haha I love what I do and I do it often. It shouldn't be that hard. DO NOT apply heat to the trans or to the axle close to the trans. Sometimes rotating them and prying. Or using 2 pry bars to put even leverage on both sides. I've had cars where I've had to wedge my chisel in there . Be careful with the axle seals into the trans. You can also tap the axle cup with a ball peen as you pry. It will come out. You just need to find someone more motivated. That stinks, the dealer should be willing to use your parts just with no warranty.
@jolush12074 жыл бұрын
@@CarMechaNick yeah after I seen them heat it up i just gave up. Axles seal are delicate. Funny story on the sonata hybrid, the axles only clicks and makes noise when turning during the summer time. All winter long it runs fine. But as soon as their is a 85+ degree day it just start making noise. I knew I should just bought a Camry instead 🤣🤦🏻♂️
@CarMechaNick4 жыл бұрын
Haha always go with the Toyota! Thats a seriously odd situation with the axles. I'd try the dealer for sure.
@paulakemp52984 жыл бұрын
how many quarts for a 2012 hyundai sonota hybrid transmission?
@Kam87GT3 жыл бұрын
5
@petedavenport3 жыл бұрын
Nick I have my mechanic he put one in from a junkyard and testing it while it's on the jacks and all the lights in the dash go on and stay on and nothing happens is there something that he needs to do any help is appreciated thank you
@CarMechaNick3 жыл бұрын
Does he have a scan tool? I would for sure check to see why the codes are being thrown. Lmk what you find. Its been a while since I've done one of these, but I feel every car needs to be flashed/programming of some sort. If traction control is in the car will not perform correctly on the stands.
@petedavenport3 жыл бұрын
@@CarMechaNick thx nick im sure i or he will be in touch
@Kam87GT3 жыл бұрын
Nice job well done .? What code on OBD ?
@CarMechaNick3 жыл бұрын
That's a good question man it was a long time ago. Not to mention someone else may have diagnosed and I did the jon.
@Kam87GT3 жыл бұрын
@@CarMechaNick thank you for reply . I have 2015 sonata hybrid some time show error Hybrid System warning safety stop and do not drive and When that happened car get jerk and slipping transmission and when I stop and start a game everything good but I checked the OBD p1744 transmission converter ! Deler says need a new transmission but car have only 100K But is happen sometime no Erroe or check light for few day and then back ! I think is not transmission Because all gear change very smooth and car don't have any problem until the error pops up ..
@CarMechaNick3 жыл бұрын
Man that is super unfortunate. It may have a problem with the converter. May be something intermittent which can be a pain in the butt. I hope you get it figured out my friend! 👍
@malikhakim80744 жыл бұрын
I have a problem to ask you mr mechanic me also mechanic i repaired kia Optima 2017 automatic transmission and this gear slipping in shifting 3rd gear if u know about this problem please answer me
@CarMechaNick4 жыл бұрын
Sounds like the clutch material may have deteriorated.
@malikhakim80744 жыл бұрын
@@CarMechaNick sir i reopen the gear and everything is good cluth and rubber too 3rd gear slipping and late shifting
@mrandmrsrubicon77803 жыл бұрын
Do you know what the issues were when driving?
@CarMechaNick3 жыл бұрын
I honestly cannot remember I do so many cars.
@toto4u9244 жыл бұрын
Hi my hyundai sonata hybrid 2011 wont start the engine code related to transmission any idea what is the issue please help me
@CarMechaNick4 жыл бұрын
Well it sounds like you know what it is you just don't want that to be the case. I know that feeling. I'm sorry my friend.
@mikejahner69433 жыл бұрын
Isn't the Hyundai Sonata hybrid transmission the same as the non-hybrid transmission
@CarMechaNick3 жыл бұрын
If I remember they are quite different but man its been a long time.
@RealWjay2 жыл бұрын
Hi!! Recently the pump of the HSG on my car failed and I have the service light (yellow wrench) came on with the flashing ready light, and my car started having a problem like its kind of confusing to wether use EV mode or gas. Especially when its coming to a stop from driving. And sometimes it wont accelerate using the EV mode from a stop til gas engine takes over (but this takes like 3 seconds after hitting the accelerator). This also occurred when weather is hot and the car has been running for a while technically hot as well. I have replaced the pump and the service light went out but the issue or problem is still there. Do you think its the HSG? the HSG or its senson might been burned since the pump failed? Can someone help me with my problem? Theres no light on the dash by the way
@CarMechaNick2 жыл бұрын
Man I can't really tell you much over youtube comments I'd have to see it in person.
@RealWjay2 жыл бұрын
@@CarMechaNick Hey, so to make it more clear now, when the engine is cold everything is perfectly working. As soon as the engine gets hot, thats the start of having the issue. Especially when the weather get hot. When the engine is hot, basically from driving it, and slowing down or coming from a complete stop, when i try to accelerate, the electric motor does not respond and it waits til the engine takes over in order for you to be able to drive or move the car (about 3 seconds delay from a complete stop). So when the engine gets rest a bit, then its all goes back to normal (well not quite, electric motor responds but not too long til it switches to gas motor). Basically its all about when it gets hot (weather and the engine). Do you think its something like a sensor?
@CarMechaNick2 жыл бұрын
Do you have a check engine light? I'd try to find a shop willing to look at live data from pedal sensors and TPS. Not something I can do here.
@RealWjay2 жыл бұрын
@@CarMechaNick theres no engine light. No lights in the dash
@CarMechaNick2 жыл бұрын
Yeah someone with a proper scan tool should be able to look at live data and possibly give you an answer.
@mmitchell17273 жыл бұрын
What was the mileage on that kia?
@CarMechaNick3 жыл бұрын
I'm not sure it was a while ago, if I had to guess, around 150k miles.
@DRP19834 жыл бұрын
Hey my friend I had to remove the engine from 2012 Kia optima hybrid I had to remove the transmission to Just let me know please
@CarMechaNick4 жыл бұрын
I'm kind of confused on what you are saying. You don't have to remove the trans at the same time. It just doesn't take long if you take it out as one unit.
@DRP19834 жыл бұрын
Car MechaNick I want remove the engine is broken but I don’t find flat wheel screws so now I wanna know if we had to remove the transmission with the engine together because he have the electric motor between the motor and transmission
@CarMechaNick4 жыл бұрын
Yes yes yes take them as a pair. Sorry.
@CarMechaNick4 жыл бұрын
It isn't to hard but there isn't enough room to separate if I remember correctly its been a while. Good luck! 👍
@DRP19834 жыл бұрын
Car Mechanic Thanks my friend you’re doing good job
@majdjamal8248 ай бұрын
Great job man this is perfect I have the same car and it’s pouring transmission oil very bad Do i need a new transmission if yes do you have one for sale If no please lmk if i can fix it and send me your address I really appreciate your response in advance
@CarMechaNick8 ай бұрын
I don’t sell them. You can find reman units or used units at local salvage yards.
@tutosELMANE3 жыл бұрын
What is the cost of that, does anyone know?
@CarMechaNick3 жыл бұрын
Anywhere from 1000 to 3000. Depending on where the part comes from and who does the work.
@malikhakim80744 жыл бұрын
I can remove gear in just 15 mints 🥰🥰 without remaining chassis
@CarMechaNick4 жыл бұрын
Thats awesome man keep up the good work. Its not always about speed though, quality of work needs to be a top priority!
@Texaca4 жыл бұрын
@@CarMechaNick --- good advice, too many ppl rush in and get over their heads, without doing the research first. I won't touch a vehicle, if I find out, that an untrained or unskilled mechanic has worked on. 😄
@marc639 Жыл бұрын
I tought electrics had no transmissions? Whats the advantage l?