Рет қаралды 56,979
This video describes how to hardwire a dash cam in a 2015 - later model F150 pickup truck.
In this installation, I use an Aucee dashcam wiring kit that I have modified by soldering a 30mm twist-lock glass fuse holder with a 2 amp glass fuse, and a 1/4" female terminal connector. I'm also using a Mini/Micro2 fuse tap on the existing 15 amp fuse in the passenger footwell fuse panel.
Maybe the links below can help!
Rexing V1P Dashcam: amzn.to/2ymWPxf
If you prefer only a front-facing dashcam: amzn.to/2VkMknf
Kingston Canvas Go! 64GB MicroSD card (recommended by Rexing) : amzn.to/34NbRbL
Aucee hardwire kit: amzn.to/2VFEQKp
Ferrites: amzn.to/34Q78G5
Safe auto trim removal tools: amzn.to/2VENPvr
Circuit tester: amzn.to/3anvVTf
Makita drill and driver set: amzn.to/3alhcrR
If you're a Milwaukee fan instead: amzn.to/3by0RkU
Or Dewalt: amzn.to/34S7Wuq
*I am an Amazon Affiliate member, so a small percentage of purchases you make from those links above go to fund this and other videos.
Inline 30mm glass fuse holder and 1/4" female terminal connector: (any auto parts store will have them)
Micro2 fuse tap: ebay.us/bnP5ly (also check at parts stores, like NAPA: www.napaonline...)
Make sure to consult your owner's manual for less important fuse circuits in your fuse panel (do not tap into anything used for airbags, restraints, or important lights).