2018-2023 Mustang Pedders Front And Rear Suspension Kit SportsRyder EziFit Installation

Bill shows you how to install a Pedders SportsRyder EziFit Front and Rear Suspension Kit on your 2018-2023 Mustang.
Looking for a more commanding stance? Take your pony's suspension to the next level with this premium Pedders upgrade that will lower the center of gravity on your 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, or 2023 Mustang, and deliver enhanced handling for an overall better driving experience.
Also, without the need for a spring compressor or special tools for installation, you'll be back on the road in no time.
This kit includes:
*(2) SportsRyder EziFit Assembled Front Struts with Springs and Strut Mounts.
*(1) SportsRyder EziFit Rear Shocks with Springs Kit (Includes 2 Shocks and 2 Springs)
Purchase Product Here:
www.cjponyparts.com/pedders-f...
Check out more 2018 Mustang Strut & Shock parts from CJ's here:
www.cjponyparts.com/2018-must...
Check out more Pedders parts from CJ's here:
www.cjponyparts.com/pedders/c...
Subscribe to CJ Pony Parts on KZbin here:
kzbin.info_c...
Music Provided By:
www.epidemicsound.com/

[@gokaisilver3801]

Lol "I like them on the top. Brendon likes them on the bottom. We're going with the top because I'm his boss"

[@viditsingh3209]

I will be buying this when I get my mustang gt. Should be getting it soon.

[@mikerosa650]

Just installed these. Like earlier today. Didn’t know about the notch on the top of the strut mounts. Now I gotta unbolt the tops and check underneath I feel like right now? Wish I watched this first lol

[@mikerosa650]

Went back in and corrected them today. Drives nice !!

[@george4u1960]

Appreciate that you said it's an inch-and-a-half lower. Do I need caster plates. To align my car back to spec.

[@CG-sr9xg]

Overall, I found this was a good kit. Couple things for the novices like me: 1. Torque the top strut nuts to 46 ft lbs AFTER the car is on the ground 2. You might as well replace the crappy stock end links at the same time. I didn’t and now they’re making noise. Replacing mine with Pedders adjustable ones this weekend.

[@eddygranados6433]

Does anyone know that name of that aluminum part that holds the spring ?

[@adamschauweker2675]

I see these are made by an Australian company and probably not too well known in the USA. How do these stack up against other brands that we know like Koni, Steeda, KYB, Ford Racing ect. Are these premium options for the S550 or more mid range for a non coilover set up?

[@cjponyparts]

These are a solid step up over the stock components. I would put them on par with Ford Performance.

[@martymarfishhunt3622]

How come no before and after pics?

[@cjponyparts]

Ice Storm. We will be adding some to our website soon.

[@gigi9467]

so i know they lower the car but how dp they compare performance wise to say the steeda struts and springs

[@cjponyparts]

They are a new product but so far I would say they are on par with Steeda, Ford Performance, etc.

[@timojaramillo2249]

the notch facing in towards the car. What does this do? if not installed facing in what would be the result?

[@mikerosa650]

I’m here for this. Did you find anything out lol

[@Ecosse57]

was really hoping cj pony parts was going to make this a drag project car.

[@cjponyparts]

Don't worry we have a plan for that coming soon! - Bill

[@TheCarCrazyGuy]

What was your actual install time Bill?

[@P3RSONALD3VIS3]

2 - 3 hrs @ 8:55

[@cjponyparts]

Including shooting video it was less than 3 hours. On my own with a lift and no camera this is an hour install but I have done a lot. - Bill

[@excelerater]

how do they ride? Ford OEM shock suck balls,how much of an improvement are these ? and they should fit 2015-2017

[@sickactor]

I just got mine & installed em. Now why is my back more lowered then my front? Can someone pls help with this? It came all pre-esembled & had a professional do it.

[@guerro327]

Should have done subframe and diff bushings while you were in there.