2020 Silverado 4 Piston Big Brake Upgrade

[@rollinassassin9499]

What years will this work for??? I’m looking to swap my 06 Sierra 1500 to a bigger brake setup

[@ArcFireX]

Yes same thing

[@SpicedRumFLHXSE]

Don’t listen to hacks or tricks someone who paints the pads contact surface on the rotor. You already know he’s an idiot that doesn’t know what he’s doing. Bye bye brake pads

[@LDub_FlyingFish]

No

[@ArcFireX]

Yes

[@mayitom3284]

N a shit ton of paint in the rotor

[@ArcFireX]

The pad while scrape it off it’s fine

[@Allfather88]

Can this upgrade be done on a 2008 sierra? Are the 2019-2020 calipers/rotors the same on all full size GM trucks/suvs? Also, can it be done using the stock gmc 18in wheels?

[@ArcFireX]

Yes yes and maybe

[@estevanrodriguez7181]

Can u feel the difference when braking??

[@ArcFireX]

Yes but it may be placebo

[@luketyson4414]

How many washers did you use per caliper

[@ArcFireX]

Each caliper gets two washers

[@ArcFireX]

At 0:43

[@zepper789]

Подойдут на мой Escalade 2005 тормоза от Silverado 2004?

[@ArcFireX]

Yes

[@OscyJack-]

All for the same stopping distance ;)

[@ArcFireX]

Cap

[@OscyJack-]

@@ArcFireX fact. Big brake kits only increase the durability, heat fade resistance, and better/shorter pedal engagement. I'm not calling you out. I usually do big brakes too. But you stop at the same distance. Especially so with ABS. Combo of physics and computer aided braking. Physically can't stop you sooner by more than the margin of error.

[@ArcFireX]

@@OscyJack- yeah probably marginally but with more pistons and more surface area plus the cool factor it’s a good upgrade

[@OscyJack-]

@@ArcFireX oh 100% it's a solid upgrade

[@ArcFireX]

@@OscyJack- subscribe 💯

[@g-man1471]

How about the brakeline can u use the stock one?

[@ArcFireX]

Yes. The only thing that gets replaced are the brakes, brake pads and rotors. That’s it. Subscribe for more.

[@jimmytwotone2127]

What did you do about the dust shield?

[@ArcFireX]

Don’t mess with it no need to

[@jimmytwotone2127]

@@ArcFireX So you just ran the old 1 or you removed it completely? Thanks for the response...

[@ArcFireX]

@@jimmytwotone2127 there’s no need to remove the dust shield during this swap. it’s behind the spindle. Shouldn’t even be messing with it. You don’t need the spindle from the new Silverado and you don’t need to take yours off

[@lsxjefe]

I got a 2001 Tahoe do you know if this will bolt up?

[@ArcFireX]

Yes perfectly

[@lsxjefe]

@@ArcFireX thanks

[@dilinplayz4249]

Brake lines work too?

[@ArcFireX]

Yes everything swaps over

[@marcomendoza9068]

Will it work without the washers ?

[@ArcFireX]

It will work but DO NOT run it without the washers. The washers center the rotors. Without the washers the rotor is all cricked and will be very bad.

[@ArcFireX]

I show the washers you need in the video. Just go to home depot

[@lowboostgarage8925]

@Paul713x is it the same brake lines ?

[@ArcFireX]

Yes same hardware same brakes. Only thing changed was the rotor caliper and pads

[@christiangrapner]

Do you know if the rears 2019 brakes work as well or are they the same?

[@ArcFireX]

If it’s the new body style it will work

[@jameswilson8907]

This may be late but 2005 suburban brakes fit but need a backing plate trim and the parking brakes are different. You end up with a 2 pot rear caliper and rotor about the same size as the factory front brakes.

[@Valdemar-Perez-III]

You can’t run 17’s on these can you 😂

[@ArcFireX]

No

[@tannercollins7169]

@@ArcFireX 18's?

[@ArcFireX]

@@tannercollins7169 some but most no. 20s and up

[@Gmcmlk]

I have a 2022 silverado with 17s you just need to watch the backspace/offset

[@97lowbo]

I got a 2015 would i have to upgrade the master cylinder?

[@ArcFireX]

No

[@SirCavemaninthewest]

My neighbors caliper unbolted and scored the inside of his wheel. can't have shit in Ohio 🤣🤣🤣

[@cp122589]

That happened to me pulling a scissor lift. Destroyed my wheel but the tire was fine lol

[@thatredcam]

did you spray paint the caliper/rotor or is that how it came ?

[@ArcFireX]

Comes silver. Painted the caliper to look nice and painted the rotor for the video. Brake use will take most of the rotor paint off.

[@mike-xb9qn]

I would have spacers made instead of washers.

[@ArcFireX]

Overdoing it

[@ArcFireX]

Easy upgrade

[@deidrequeen3288]

What size rims??

[@ArcFireX]

@@deidrequeen3288 mine are 20s oem

[@deidrequeen3288]

@@ArcFireX thanks, I got 17's oem