We get a first look in person at the 2021 Mustang Mach 1. We take you through the details on the Fighter Jet Gray and Base Model Mach 1 to give you a close up of every detail that makes these cars special.
Пікірлер: 753
@keyakku9354 жыл бұрын
"it's about personalizing not only the appearance but performance..." *that's gonna cost you 5 grand for that spoiler*
@KeairaKusanagi4 жыл бұрын
The GT350R wing is $12000.
@KeairaKusanagi4 жыл бұрын
I'm buying that grille for my GT. I want lights in the grille
@pawg2064 жыл бұрын
Keaira Finlay it’s a totally different front bumper lol. The headlight is the same yes but that’s it
@KeairaKusanagi4 жыл бұрын
@@pawg206 yea. But the grille is the same dimensions as the 2018+ mustang.
@pawg2064 жыл бұрын
Keaira Finlay just do the whole bumper conversion
@TMB5BER4 жыл бұрын
Those faux fog light panels were never meant for lights ,,,, they are meant for twin Turbos,lol
@eYeHyZZz4 жыл бұрын
Not gonna lie I haven’t kept up with the mach 1 just waiting for 23 and I seriously thought they were some twins
@raionshishi82904 жыл бұрын
That's what most people are gonna do obviously.
@k48473 жыл бұрын
I concur (BUT I THINK you meant to say 2X twin turbos) a Turbo is Free more efficient way to make more HP
@GerardPedrico3 жыл бұрын
Black Mustang means that you do not need to go to the car wash service too often. You can still look nice. And it looks mystical.
@k48473 жыл бұрын
@@GerardPedrico I have a black Lincoln AND its hard if not impossible to keep clean. The Magnetic Metallic paint is beautiful and looks Mystical, mud blends right in NOW that is the color you need if you don't want to wash it as often. Black is way too hard to keep clean as even just only dust shows up on it.
@sirdavidr60644 жыл бұрын
Looks nice but just doesn’t stand out enough and doesn’t seem special like previous Mach 1s. Seems like they just want to quickly sell something and didn’t put any development into it
@freeautoinsurance3654 жыл бұрын
this is what the old mach 1's were
@crevis124 жыл бұрын
The stripes are weak, needs to be more pronounced, and please add a shaker scoop!
@crevis124 жыл бұрын
Go look at the 1970 Mach 1.. the stripes down the sides, the bold black hood stripe and the shaker!! That is what we want.. with line lock and 500 hp! Made to go light to light as well as canyon carve on sundays
@kevindust27124 жыл бұрын
@@ZboeC5 This has very little in common with the Bullitt. The B has the GT350 intake and the PP1 suspension. The Mach 1 has the GT350 intake, the GT350 transmission, the GT500 coolers, different aero and the PP2 suspension.
@DalHarpJr4 жыл бұрын
@Kevindust... Thank you, for enlightening those that do not know the full mechanicals of this car as few do. You definitely beat me to the punch schooling the non-believers! LOL
@331Grabber4 жыл бұрын
The shaker should be optional on the non race ready Mach 1. Or both since we like them so much.
@zappedbylife70584 жыл бұрын
I’m sure they’ll be aftermarket if they don’t, the shaker hood is what made the mach 1 stand out bummer ford went without
@TheKnightWolfen4 жыл бұрын
But a shaker in a modern day dual fuel injected car would be faux anyways... could always buy one off Ebay or something and tape it on... same difference Lol. They already have the fog light area that's detachable for either cooling or maybe even the possibility of bolting on a TT kit and making use of them... now that's something I'd be down for. Car already looks great, just needs at least another 200whp and then it's worthy of the name!! Even though the old classics were never near that, or even this level, but still... love the car and hopefully I can afford one by May next year 😎
@scottandrews48224 жыл бұрын
The shaker hood was optional from the factory on non Cobra Jet models also. I had a '69 351W with one as a factory option.
@rumrivertriples40734 жыл бұрын
@@scottandrews4822 I caught that too. Or the 390 for that matter. In '70 it was optional on the 351C as well.
@scottandrews48224 жыл бұрын
@@rumrivertriples4073 Yes, it was optional on any V8 engine.
@joenobody25804 жыл бұрын
Soooo is that radar absorbing paint ? Asking for a friend.
@pebblesbambamtwins4 жыл бұрын
WUAHAHAHA! That should be an option too...
@tareqjawdat64014 жыл бұрын
You cracked a good joke there man but for a moment i was quite n thought what if that's possible?! lol imagine u flyin pass thru a radar n they get 0 readings! that would be a WOW thing to have cool imagination man!!
@pebblesbambamtwins4 жыл бұрын
Tareq Jawdat they’d prolly chase you down and book you for speeding AND illegal equipment!
@Alexander6614 жыл бұрын
First event after Covid. I didn’t realize it was 2021 yet.
@thesauceman84574 жыл бұрын
Thats what i was gonna say 😂
@deeznutz90634 жыл бұрын
Didn't realize the *TrumpVirus* was over. Oh yeah, it isn't. 124,000 dead in the US and counting!
@dereckhernandez79394 жыл бұрын
@@deeznutz9063 You do realize over half of those deaths are old people being forcibly put into nursing homes by democrat governors right? If you're going to ruin everything by promoting communisim, at least get your facts straight.
@bobtenharkel43674 жыл бұрын
Dereck Hernandez he must watch cnn.
@dereckhernandez79394 жыл бұрын
@@bobtenharkel4367 "cnn, not even once" Im amazed some people have it so bad they spew this shit in a video about mustangs. Im a pretty middle of the road guy. But this is the reason ill be voting for Trump.
@antoniorios38563 жыл бұрын
i think its a perfect track/street combo, that transmission also allows for more power if u wanna supercharge it. Looks pretty sick also
@IMGONEIN604 жыл бұрын
Awesome info as usual Evan, but is fighter jet grey part of the appearance package?? I would love to have a base version with the appearance package...
@joenobody25804 жыл бұрын
Ask him if there's any plans for a big block 7.3
@bliglum4 жыл бұрын
No shaker hood, no sale. That was the best part of the Mach 1!!!
@daisbestDA94 жыл бұрын
Yeah it wasn't the cobra jet engine or anything...
@wayneblack40773 жыл бұрын
ABSOLUTELY
@rchoper214 жыл бұрын
Why can't ford sell supercharged 5.0 gt starting at $43k like Lebanon Ford?
@lealandyoung4 жыл бұрын
Because they want a supercharged car that can actually hold up on a track as well as handling and braking competently. The Lebanon Ford cars are just GTs with a blower strapped on without much of anything done in the handling and braking department. 3 laps in and the Lebanon Ford cars are going to be pulling off the track and going on the trailer if the owner doesn't put the them into the grass first trying to catch cars with less power like the GT350 and soon Mach 1. The S550 chassis doesn't really work all that great when you get power numbers much past the GT350 and is part of the reason the GT500 comes with a DCT since it allows a more comprehensive traction management system than the automatic and manual cars have. You can band-aid it with some bolt-ons and sticky tires but look at what they put into the GT350, GT350R and GT500 to really extract usable performance from those cars as well as durability.
@christenn324 жыл бұрын
They don't want to warranty it because the msrp of a 5.0 makes it affordable for a lot of people. Ford knows 95% of the GT500s will be garage queens, so they supercharge it knowing their wealthy owners will never beat on it. On the flip side Ford knows that 95% of supercharged 5.0s will be beat to hell by it's owner.
@ConstantineJoseph4 жыл бұрын
Supercharging means they have to re engineer the entire engine and other parts to take the massive increase of heat. It won't be the same engine as modern turbo and supercharged engines are designed to be durable and specifically be resilient to heat. However with heat, comes with increased issues as components break easier throughout the car so the cost is much higher when you want turbo or supercharged. So if they offered a supercharge variant you have to pay a lot more which most mustang segment customers are not keen to fork out that kind of money for a mustang.
@scottyhudson11074 жыл бұрын
Also 43k is very low for a car with that power people will get themselves killed showing off
@raionshishi82904 жыл бұрын
@@scottyhudson1107 Already have examples of dumb asses buying cheap Mustangs with tons of power in the past showing off at car shows and giving the Mustang the staple of "Crowd Killer".
@bige83974 жыл бұрын
Just put the Shaker on it. The Shaker is the Mach 1. How Ford ever thought to pull off a Mach 1 w/out the Shaker is beyond me.
@mmessisco4 жыл бұрын
I had a 04 mach 1. I would never buy a mach 1 without a shaker
@justaburgscousin4 жыл бұрын
That’s a pretty decent looking GT. 😂 honestly I like the way it looks but it doesn’t justify the price tag. It should stand out way more. I’ve got a royal crimson 2018 gt premium, and I’d rather have that car than this one. If it had the shaker, maybe optional rear and side louvers, with a bigger horsepower jump, then the price would be justified. Pretty much every complaint about the car, he just use the “just buy aftermarket parts” excuse.
@gregbphotography4 жыл бұрын
Agree. Although one of the chief engineers said the GT350 open air intake on the car was already set up. Adding the shaker hood would require a completely different engineering set up to incorporate the shaker hood.
@robertmclure4 жыл бұрын
Oh for fks sake get over the shaker. Jesus.
@bige83974 жыл бұрын
Gagik Etibaryan Sad but true.
4 жыл бұрын
Still working on the development of the engines Does that mean there's a possibility for more hp?
@chrism39334 жыл бұрын
@god isnt that the same hp figure the 2020 Bullitt came with? If so, that's fucking weak.
@evanthomas96564 жыл бұрын
Chris M to be fair 480hp isn’t super weak considering stock. U throw a couple bolt ins get a tune and cam and u get be pushing some serious power without forced induction
@wayneblack40773 жыл бұрын
i THINK THEY WILL ADD A SHAKER OPTION
@shamismcswigins4534 жыл бұрын
Your channel is soooo underrated, you deserve many more subscribers! While other “car guy / influencers” KZbinrs are making clickbait videos on reacting to pictures, you are actually at an unveiling. I appreciate your place in ford/5.0 history and hope for your future success. I am an enthusiastic subscriber and anxiously wait for your videos. Keep up the great work & awesome ford content!
@revanevan4 жыл бұрын
Thanks, I'm hoping it grows. I appreciate the comment.
@RangerDanger074x44 жыл бұрын
Great video Evan!!! So did he say you cannot get the 10 speed in the fighter jet grey package?
@revanevan4 жыл бұрын
Stick only.
@mikegay85114 жыл бұрын
I'm sold on a Mach 1. Who can I talk to, to place an order and bypass dealer mark ups? The fighter jet Gray is going to look excellent in my driveway.
@robertstewart30864 жыл бұрын
Good Luck With That ! I still haven't figured out how not to get screwed on the GT500 !
@mikegay85114 жыл бұрын
You trying not to pay dealer mark ups. That crap is out of control to charge 60k for the top of the line Mach 1.
@rembo1834 жыл бұрын
Mike Gay - Going thru dealers only way to buy these cars. Otherwise dealers wouldn’t exist.
@rembo1834 жыл бұрын
Robert Stewart - Not all dealers add markups,
@Themazcorner4 жыл бұрын
Thanks for the video! One Question will the handling package be available with the 10R80 or not. In the video it is mentioned it is available on the "performance model" not sure what that means in this context. I am on the waiting listing for one here in Sweden, but it depends on the final pricing here and what package/options that will be available to us
@revanevan4 жыл бұрын
I believe so.
@alvaromolina16234 жыл бұрын
According to all the articles on the mach 1 that I've read, the handling package is only available for the tremec six-speed manual transmission. I hope that isn't the case however because I would love to get the handling package with the 10 speed.
@gustavo-gs6jy4 жыл бұрын
Where’s the shaker scoop???
@al1514 жыл бұрын
So will this car outperform a camaro ss 1le which is almost on par with a GT350? That is my concern. I am not talking about 1 lap but consistent lap times without overheating.
@leroypaterson27374 жыл бұрын
Beautiful vehicle. Can't wait. Just very disappointed about the 480hp. I think Ford should have pushed for 505hp at least. The standard GT (10 speed automatic transmission) is going to beat the Mach 1 manual in a quarter mile drag race if only 480hp....how disappointing would that be!?!? Cannot think that Ford would allow that to happen! :ol My opinion: Expect 500hp to 525hp
@markdevero56484 жыл бұрын
Probably underrated..... Good call.
@al1514 жыл бұрын
Well the GTPP 10 speed beats the Bullit really bad in the quarter mile and 0-60 mph. There is almost a 1 second difference in the quarter mile.
@martyrichards3083 жыл бұрын
The last Mach 1, '03-'04 made 25% more horsepower 305 vs 245 than the GT. That was a difference worth talkin' about. I had an '03 and that DOHC all aluminum 4.6 was a rocket and revved like nobody's business. Track day was amazing, upgraded the brake pads for that and had a blast. I can't see me going for the new one. "the striping is important", not so much. No shaker, not really a Mach 1.
@UnityMotorSportsGarage4 жыл бұрын
Dude you killed it once again!!! Always ahead of the pack in Ford Unveilings!!! Love it
@revanevan4 жыл бұрын
Thanks
@zenozeno87654 жыл бұрын
Cool video! your love for mustangs is always shown. By the way i have notice your weight loss ! Good videos and keeping fit!
@revanevan4 жыл бұрын
Thanks, lost 25 lbs. I appreciate the compliment and encouragement.
@413x3984 жыл бұрын
@@revanevan How warm and fuzzy. Now drop and give me twenty!!
@mustang_garage4 жыл бұрын
It's always good to see J.O. because when you see him at a show you know there's a cool new Mustang product there!
@blasmartinez47074 жыл бұрын
I wonder if you would be able to get the Recaro seats in the handling/appearance package?
@robertstewart30864 жыл бұрын
Dude I'm confused as well..Just give us the damn options we want !
@ricksinger80164 жыл бұрын
Shaker was available with the 351 ,390,428 do your research
@crevis124 жыл бұрын
Needs a Shaker hood!!
@chrism39334 жыл бұрын
I want to know why this 2020 Mach 1 and 2020 Bullitt have similar HP ratings when the 03's were separated by 40 hp. Couldn't the 2020 Mach 1 be delivered with 520hp?
@1225KPH4 жыл бұрын
The '03 GT was 260HP. The '03 Mach 1 was 310HP or 50 more.
@Motor-City-Mike4 жыл бұрын
Works for me - at least as much as the Mustang does anymore. I see some people aren't happy that it's not more "old school" (shaker scoop etc) but the Mustang moved on from retro after the '05+ body style went away, and the old styling marks wouldn't look right no matter what. A shaker scoop wouldn't even shake now, there's no longer that "lopey" idle that made the scoop move in the first place. Personally, I think the whole car should have stayed retro, again the '05+ body, like the Challenger has but Ford isn't interested in selling an updated version of old - Mustang buyers are young just like they were when the Mach 1 began and it's them Ford is designing for. Now THIS old fart would love an '05 "Mach 1" - 7.3 with a cam lopey enough to shake that scoop, close ratio 5spd, solid axle on leaf springs with a 4.56 and a locker. Call it the Drag Pack and knock the headlights out of the naturally aspirated Camaros and Challengers out there, just like in the beginning. Hey, an old man can dream....
@tednewcomb10484 жыл бұрын
Amen brother !
@paultucker12724 жыл бұрын
Great video Evan, thank you. It's a superb car, my only gripe is I wish you could get the 10-speed with the Handling Package. Otherwise, it looks superb.
@revanevan4 жыл бұрын
Thanks Paul.
@kevindust27124 жыл бұрын
The automatic is great for cranking out quick and consistent 1/4 miles but the increased downforce from the handling package would be a detriment on the drag strip. It makes sense to me why they wouldn't offer the handling package with an automatic.
@prolevel47174 жыл бұрын
When will we get the 428 egine option
@OrangeBoss-ww8eb4 жыл бұрын
might be better deal buy used gt 350?
@nemesis_ftw25964 жыл бұрын
And play the game of will my engine go boom? Good luck with that...
@daisbestDA94 жыл бұрын
@@nemesis_ftw2596 2019s and 20s don't have that issue
@jonasblane21574 жыл бұрын
@@daisbestDA9 Yes they do believe it or not. I wont touch them for this exact reason. Here's a stock 2020 GT350 with a broken valve at 1000 miles. www.mustang6g.com/forums/threads/2020-gt350-1000-miles-dead-with-broken-valve.143051/
@elmostong18654 жыл бұрын
Awesome Video, Great info on the MACH 1
@revanevan4 жыл бұрын
Thank you.
@raceredboss4 жыл бұрын
So he said they are still working on the engine calibration ? Does that mean we might see higher horse power numbers ?
@RaceGasSmellsGood4 жыл бұрын
Love it! Curious to see how its lap times compare to a PP2 and a GT350! Thanks for another killer vid!
@bradwhite58844 жыл бұрын
I'm glad they brought back the Mach 1, hope they bring back other sports pack like Boss 302, King Cobra and so on
@piercemccauley70794 жыл бұрын
This ain’t a Mach 1 I hate to break it to ya
@dnsbb80334 жыл бұрын
Pierce McCauley I remember my first 04 mach 1 miss the shaker hood I have a 16 5.0 procharged and I still miss seeing the shaker moving
@SoFarFromCrust4 жыл бұрын
Wasn't the king cobra a 4 banger turbo?
@joellevesque8603 жыл бұрын
Are the front fenders the same as the ones on a 2018-2020 S550?
@Robert84554 жыл бұрын
Those looking nothing like Magnum 500s. I like that handling pack and the color but despite its negative effect on the top end, I still would have like to see the shaker as an option. Would be real nice to have a twin turbo option too.
@sergebasque84604 жыл бұрын
Thanks again Evan you look to be in great shape, just retired two year ago bicycling 15 milles everyday. Now this Mach 1 is gone be faster than a 2020 GT because I’am pretty sure hot rod boys from Ford is take care of that performance side of it. I’am gone say hp will be in the 500. Thanks good content has always.😎👍
@revanevan4 жыл бұрын
Thanks!
@TimJohnson-or9iy4 жыл бұрын
I’m a Ford guy but please tell me they’ve rectified the 5.0 typewriter tick and piston slap issues. If not, it’ll be an embarrassment.
@sidsideways28284 жыл бұрын
Was the on Sunday?? I was there with my 2003 mach 1
@mikebutler80434 жыл бұрын
Great video sir. Thank you
@vulturex32654 жыл бұрын
thanks for the update, wish it had a 5.2 crossplane crank in it with 500hp. Dealer mark-up will kill its sales since it not much more than a GT Premium Package.
@gen1c8rs884 жыл бұрын
I to wanted a 5.2L cross plane V8 in the Mach 1 with 517 SAE HP(100 HP per liter) at 7500 rpms and a 8000rpm redline. I hope that the Mach 1 with the handling package will be on par with the GT350 in the handling department. Mabye there will be a Boss 315 for 2022.
@yourmom1lastnight4 жыл бұрын
I don’t want to put fog lights in there, ima run my twin turbo setup through that
@KeairaKusanagi4 жыл бұрын
Whereas I want fog lights. The lack of them has been my biggest gripe with the S550
@andrewchavez51824 жыл бұрын
gt500 engine in the mach 1 as the top performance engine?
@Patrick-fw4qd4 жыл бұрын
I was all ready to put down an order but reusing the 5.0 without any changes doesn't seem very Mach 1 to me considering that's how the last two Mach 1s were
@deedo7734 жыл бұрын
Im soooo getting one, definitely handling package either red/blue/yellow/ paint color. still not sure if i want 10 speed or the Tremec 6 speed
@_hashtag4 жыл бұрын
I had the 10 speed on my old ZL1. It is a phenomenal transmission.
@darrenwilliams33984 жыл бұрын
Richard Mountford I agree I’m getting one as well! I just hope they’re not going to be overpriced and marked up like the gt500/gt350 and r
@diegobanuelos174 жыл бұрын
Darren Williams they definitely will be
@k48473 жыл бұрын
The 10 speed will OBVIOUSLY Shift Quicker than a 6 speed manual AND 1 OF the 10 gears will KEEP the engine ALWAYS in its Optimum Power Band. ALSO it has paddle shifters like a Ferrari and will operate JUST like a 10 speed standard IF you want it to. When you want to pass, IF you blip the left paddle it will automatically choose the optimum gear for passing, it does that for any speed. I'm glad my stang has the 10speed ALSO the Magnetic Metallic paint is beautiful. It's dark metallic grey that Almost looks Black (it does turn black at night) but it doesn't require the high maintenance of black paint. Mud blends right in so it looks clean while muddy I highly suggest you look at one with that paint, its awesome.
@camirocz4 жыл бұрын
Very good informative video.Thank you.
@mattfarahsmillionmilelexus4 жыл бұрын
I wonder why the '74 Mustang II Mach 1 isn't in the promo pictures? That 2.8 V6 was a real animal.
@mistress3134 жыл бұрын
I owne a 2004 mach 1.........please bring back the shaker scoop
@petejoseph82573 жыл бұрын
So, when will it be available with the 7.3?
@williamclark37124 жыл бұрын
VP cars will never be sold to public? I thought same rule applied to TT cars but there is a 2020 GT350R TT for sale.
@MaximillianRed4 жыл бұрын
6:09 how about both lights and air like the challenger headlights /winning.
@jg115964 жыл бұрын
Mach 1 vs GT350 - other than the 5.2 FPC motor, what's the difference? is the 5.2 going away because of reliability issues?
@robertstewart30864 жыл бұрын
What about the Coyote issues ? Does the new Mach come with the non optional (normal tick ?)
@jg115964 жыл бұрын
@@robertstewart3086 What issues does the 5.0 Coyote motor have? this motor has been around so long, I thought it would be fully sorted out and bulletproof
@robertstewart30864 жыл бұрын
@@jg11596 Wow, not sure how you haven't heard about the Gen 3 Coyote issues ? A fair amount of them have piston to wall clearance issues with the plasma coated cylinders , and it starts off with a ticking sound coming from the Oil pan ! And could lead to premature engine failure ! (it's all over KZbin)My friend Don has a 2018 with 8000 mi and his is starting to tick ! Ford is no longer replacing these motors and is calling the tick (NORMAL) is hopes that the car will fall out of warranty when it self destructs ! Then you have KZbinrs like StangMode who's Gen 3 is fine ! It's A CRAPSHOOT !
@ithomasschacht43314 жыл бұрын
It needs the Shaker hood. Sounds like a song and dance why it's not there Mr. Mustang. 😄 Pretty cool car. Glad there bringing it back.
@scdevon4 жыл бұрын
The functional shaker intake definitely improved the performance of the older Mach 1's, but they've probably engineered their way around not needing it at all anymore.
@shoes38714 жыл бұрын
i dig it wonder if some parts will fit my 2020
@AntilleanConfederation4 жыл бұрын
We need a break down of the configurations. What exactly does handaling package add and what does appearance package add.
@revanevan4 жыл бұрын
Noted!
@AntilleanConfederation4 жыл бұрын
REVan Evan please and thank you. Looking forward to the video. 😎
@TheKnightWolfen4 жыл бұрын
Yes thank you Evan... love this car! And so many haters out there already without really knowing a Damn thing about it Lol
@michaelparra87194 жыл бұрын
Mach 1 emblem is in the wrong place. it need to be at the bottom of the fender like in 69 and 70.
@coreysmithsvt4 жыл бұрын
I want a drag pack mustang with the new 7.3 and a 4.10 gear. Not a cobra jet either, a legit street/strip mustang.
@AntilleanConfederation4 жыл бұрын
Boooorrrriiinng. I’ll take turns and rev matching down shifts any day.
@413x3984 жыл бұрын
I'm with you on the 7.3. Needs another year or two to get the bugs worked out and the aftermarket cookin'. Then we can pitch the Tik Tok Coyotes and swap in something with some bigger teeth.
@coreysmithsvt4 жыл бұрын
NEPTUNE117 there are already plenty of options for that: the pp2, the gt350, the gt500, and now the Mach 1. Drag racing is more accessible and affordable to the average car enthusiast. Track days are pretty expensive at my local road course, but for $25 bucks I can spend a night at the drag strip. I like turns too, but to do it legally and safely, it’s cost prohibitive.
@joeleaton71874 жыл бұрын
Yes yes yes yes that would be so cool , kill the Dodge challenger scatpack 1320!
@TheKnightWolfen4 жыл бұрын
Lol seriously? I killed Scatpacks down the 1320 in my 2014 ffs Lol
@cobraracer46624 жыл бұрын
There were two different Mach 1 hood scoop versions available. One is the "shaker" that is mounted on top of the air cleaner and goes through the hood (Cobra Jet on the side), the other is a hood scoop that mounts on the hood (351 on the side for example.) and is non-functional. Most people would install a aftermarket air cleaner making the hood scoop functional. With the new Mach 1 being fuel injected it needs a hybrid hood scoop/cold air intake. The two so-called fog light openings might work.
@k48473 жыл бұрын
A FULLY FUNCTIONAL RAM AIR shaker would have been the way to go on this 2020 Mach
@bobbyweymouth24934 жыл бұрын
Lol no shaker hood bc it’s strictly a performance car... but no bump in power, no SC options lol... just a rebadged gt 🥺
@Perry21864 жыл бұрын
should of had the shaker hood and a 6.2l truck engine in it make it pressure the mustang corbas , cameros and challengers
@dinosoarmotorsports4 жыл бұрын
How does he talk about the tires and not mention sizes? I am trying to find out the base Mach tires sizes. Wheels are bigger than Bullitt/PP1 wheels, so aren't the tires on the base Mach? This is a big indicator of cornering speeds and performance overall. Maybe that's not been settled yet.
@revanevan4 жыл бұрын
Look up my story on mustangdriver.com
@jimphillips75824 жыл бұрын
@@revanevan tire sizes ??????
@elr21419794 жыл бұрын
Does it come in white?
@michaelholliday60374 жыл бұрын
I love the old school 1970’s music! It almost sounds like the intro to the six million dollar man TV show!
@overheadcamwalling41464 жыл бұрын
thanks for the info. Jim is very informative and seems like a nice guy.
@tommy-jt6kj4 жыл бұрын
480p max res? What is this being filmed on a Motorola razor?
@Offthehandlenick4 жыл бұрын
Where did u get the pic with all 3 gens?
@revanevan4 жыл бұрын
I took the photo at the event.
@sigma4g4 жыл бұрын
so theres 10 colors for this car? what colors are confirmed for this car?
@mustangsrule584 жыл бұрын
Thought you were in Tulsa?! Nice car!!
@MeMyselfI_694 жыл бұрын
10:02 the GT PPL2 didn't have that and the offset had the tires going outside of the fender with SC2's.
@liquidleopard44954 жыл бұрын
And owners complained on the forums about the tires throwing debris down the sides of their car and tearing up the paint.
@MarkNOTW4 жыл бұрын
Why would they only offer one color in the handling and appearance package???
@michaeltorruiso54364 жыл бұрын
Yeah not a fan of the dull grey and orange. Bummed its the only color in the handling and performance package.
@don-nl1vk4 жыл бұрын
put the shaker scoop back already that hood is boring , to bad !!!
@robertstewart30864 жыл бұрын
What's wrong with a 2018 GT hood on your brand new Mach1 ? FORD?
@GTJIMI34 жыл бұрын
It sucks. Should call it Mustang GT. Because that's what it looks like. 🤬🤬🤬
@raionshishi82904 жыл бұрын
@@GTJIMI3 Honestly i just doesn't, there is nothing on this that the normal GT actually has standard.
@edwardarsiaga35694 жыл бұрын
No big hood scoop?
@ShelbygtR-wo8wh4 жыл бұрын
Great video,I like it but I want Ford to bring back the Boss 429
@monstermavericks4 жыл бұрын
I agree. Boss 429, one of the best muscle cars. Now very rare and expensive. This is looking more like a trim package.
@1225KPH4 жыл бұрын
Program Manager Scott Hoag sold management on the '03 - '04 Shaker by proving it provided a mild performance boost above 80MPH.
@tylerparker19594 жыл бұрын
What’s the point of getting the handling package or this car it’s going to be 50k plus makes more sense to get a gt350
@cobraracer46624 жыл бұрын
If you do a search for a Challenger Hellcat Redeye review you can see a single large hood scoop ductwork under the hood that is made to seal with the cold air intake to the throttle body.
@richardpratts70114 жыл бұрын
Absolutely Beautiful!! 👍 I'm gonna get one.. Love the color's..
@TheCdM19814 жыл бұрын
How is the lip molding up front “required” when the PP2 doesn’t have it with a 305 up front? That explanation makes no sense.
@kevindust27124 жыл бұрын
Well, the GT PP2 should have had it from the beginning to prevent rock chips. Maybe they are admitting that they missed that on the PP2. Or maybe the front wheels on the Mach 1 are set out just a little more than the ones on the PP2.
@TheCdM19814 жыл бұрын
Kevindust impossible. Ford said it was legally mandated. A car company can’t just release a car with something required. It’s a bad excuse and most likely incorrect and a lie because they have no reasoning to their body style queues
@DalHarpJr4 жыл бұрын
@C M... Check certain 2020 Audi and Mercedes Benz models with a wide wheel & tire set up, and you'll see the very same type of plastic fender extensions that are DOT mandated to be installed for the vehicle to sell in the U.S. Maybe with the GT350's outboard coolers, the wheels or the wheel offset changed, pushing them out. The GT350 has different/ wider fenders which probably didn't need the fender extensions like the Mach 1 now does, since its based off of your basic GT sheet metal. Just my uneducated guess.
@TheCdM19814 жыл бұрын
DalHarpJr again. The PP2 doesn’t have it. I never said anything about the GT350. I am very well aware it’s fenders are much wider than a normal S550 fender. The PP2 has 305’s in front. Square stance. If that doesn’t need it the mach1 with a staggered doesn’t either.
@raionshishi82904 жыл бұрын
@@TheCdM1981 Dude, are you really butthurt over some simple lip ? Seriously, who the fuck cares.
@JerryCecco4 жыл бұрын
What are the weights of Mach 1?
@NokturNPolska4 жыл бұрын
In your opinion is it possible that they will actually make the engine more powerful, like 500+ hp?
@leroypaterson27374 жыл бұрын
I think the stick will be over 500hp.
@NokturNPolska4 жыл бұрын
@@leroypaterson2737 That's great news cause I am very interested in the manual version. The last question ;) I am writing to you all the way from Poland, we had here normal GT as well as the Bullitt. Do you have any information that this will be also a global car for all different markets including Europe?
@leroypaterson27374 жыл бұрын
@@NokturNPolska - Apologies, did not see your message. Yes, global product for 2021. 👍
@4-LOW4 жыл бұрын
Why the hell did they leave out the hallmark of the Mach 1? No shaker? Really? Well, that's par for the course for Ford over the last decade. They've totally lost their connection with the consumers.
@robertstewart30864 жыл бұрын
WOW ! Well said !
@CodeineAbdulJabbar4 жыл бұрын
Shaker was an option on the original Mach One
@Sergeantgrunt4 жыл бұрын
Not all Machs had the Shaker. I understand it, but don't like it. Cervini has been doing ram air hoods for a long time. I'm sure Ford could have done it and make it functional.
@lxtermi19064 жыл бұрын
@@Sergeantgrunt even if they couldn't They could at least gave the benifit of the doubt and put a non functional shaker.
@nicknick20264 жыл бұрын
Because they would had to make a new hood and would have to spend tons of money for the crash testing and all those rules and regulations, so they just threw a normal hood because it didnt cost them anything..its all about the cash..
@xGhostRidah4 жыл бұрын
The shaker comes up in the front! Thats the surprise they didn't mention yet!
@michaelwatkins56154 жыл бұрын
First ever car reveal with a factory rep that knows the product. Well done.
@lawrencegatt45153 жыл бұрын
Ford should have a Mustang named after the great 👍 race driver Ken Miles.
@chadkent12413 жыл бұрын
Amen. Just finished Ford vs Ferrari for the tenth time lol
@domingodeanda2334 жыл бұрын
That was pretty damn good!
@robertgardner12594 жыл бұрын
Liked the video, but Ford has enough "Track Focused" Mustangs. Time to build something for us "Drag Racers". No 5.2 CPC No 3.5 TT No 7.3 Godzilla Honestly the trans out of the GT500 should be a option.
@revanevan4 жыл бұрын
Yes!
@deanarmstrong81854 жыл бұрын
Agree
@JustinLaNoue4 жыл бұрын
5.2 CPC N/A and DCT would’ve actually been special. Not this sadly 😔
@zombieaficionado62684 жыл бұрын
2021 Mustang Terminator!!!
@k48473 жыл бұрын
IF the 1550hp ELECTRIC Mustang is not a drag racer than WHAT IS???
@400hpmustang4 жыл бұрын
Top loader or body mounted shifter? One piece driveshaft or cheezy Chinese two piece drive shaft?
@user-qi9rr5so8x4 жыл бұрын
Does anyone have any info on base pricing?
@christopherj.snyder27384 жыл бұрын
I’ll wait for the next Mach One, Ford can keep this one
@amac84874 жыл бұрын
That color is 🔥🔥🔥
@2010challengerRT4 жыл бұрын
I want one with a hopped up 7.3L Super Duty V8.
@johnt66734 жыл бұрын
Love the front end. Wish it had 500 Hp. Not sure your going to feel the 20 Hp over the normal 5.0. Hell, may not even feel the difference if it did have 500 Hp.
@50_ANNIE4 жыл бұрын
With Twister Orange in the color lineup I really hope they make a Twister Special Edition.
@KingOfCreampies4 жыл бұрын
So it’s essentially a bullitt with some body work😂
@UltStream4 жыл бұрын
well this is the replacement for the Bullitt after all
@ckmckeon4 жыл бұрын
Yes but the most important thing is that they brought the Tremec over to the Mach 1. So its a better version of even the bullitt.
@stevearmstrong53234 жыл бұрын
The Mach 1 looks great. Its a pity that people who were not even around when the original came out, feel they much gripe about details. The most fabulous Mach 1, the Twister Special came with very few options and no niceties. My 2019 Ecoboost can beat the 428 SCJ in the quarter, plus outperform 99% of the cars of that era on a road track. We are in a great period of auto history, but the number of options are limited by production numbers, government mandates, and development costs.
@robertstewart30864 жыл бұрын
Wow that was a fancy answer as to why Ford cheeped out by not giving the new Mach1 it's own unique hood ! Also did he say you CAN have the Handling package that include fat rims & tires with the 10R80 ? Or not ? I'm a little confused ?
@srhatfield4 жыл бұрын
2:50 Customizable except if you want the handling package and an automatic. Those 2 are not available together in the Mach1. I'm not an automatic person but damn that just seems random to me...
@robertstewart30864 жыл бұрын
I know Right !? How out of touch with there consumers can they be !?
@Guy99984 жыл бұрын
Unfortunately none of the current Mustangs are all that customizable from the factory. I hate how you can get some options with one package but not other options without generally going for another package like a black roof with the performance package. Even wheel options are locked behind certain packages. You can't even get the spare tire if you go with the performance package.
@robertstewart30864 жыл бұрын
Guy9998 Wow that’s so crazy about the spare tire. This is a huge problem with Ford! And is probably the single biggest reason why the bullet mustang was such a failure. Zero options, literally! No 10R80 and you really had to light green! How hard can it be to add an option when it’s coming down the assembly line? If it’s an extra option then charge extra for that option!?
@Guy99984 жыл бұрын
@@robertstewart3086 I really don't understand the spare tire thing. I mean it's not like the performance pack has additional things in the trunk obstructing the spare tire area. I didn't realize the Bullitt was such a failure. Come to think of it I've only seen one on the road in my area and there are lots of Mustang owners here. The only options on the Bullitt was Black or Green and Recaro seats. I don't think many bought the black. I think the Bullitt was really just for fans of the movie. I'm sure some guys tracked it or drag raced with it but really it was for guys like Matt Maran. I wanted one because of the lack of badges and I love the film. I also thought it sounded better than the standard GT. I ended up buying an Orange Fury GT PP1 instead because I got $12000 off on it for it being an '18 and it had pretty much everything I wanted minus magna ride. No regrets here. I've still not had any problems with the MT82 but the engine does tick until it warms up.
@robertstewart30864 жыл бұрын
@@Guy9998 Sorry to hear about your unfortunate Coyote tick, hopefully it wont get worse ! This is one of the Exact reasons I was hopping the New Mach ! would get the Predator motor only NA. Similar to the 03 &04 Mach which got the Cobra motor only NA ! Remember the Predator is hand built and is far less likely to experience poor piston to wall clearance issues like the Coyote. I would love to have a 2021 Mach in my garage sitting next to My beautiful 69 Mach1 ! If Ford would truly Honor the Heritage .
@theman.63964 жыл бұрын
Would rather have a functional shaker. Come on its 2020 you guys can make it work.
@liquidleopard44954 жыл бұрын
They "made it work" in 2003. It added drag, added weight on top of the engine, and made the exact same power as the shaker-less Cobra.