2022 Beta Motorcycle KYB Fork Rebuild, Fork Seals & Bushings, Step By Step Instructions!

Leaky Fork Seal? No Problem! Follow along for step by step directions on how to rebuild your KYB forks on your newer 2020+ Beta Motorcycle
BETA PARTS 🛠️⚙️- Choose "3 Seas Recreation" for your Beta parts! Customers can now order all Beta parts and accessories directly from the Beta USA website. All parts inventories are in real-time. Customers can choose shipping options and the best part, selecting their preferred dealer.
Why choose 3 Seas Recreation as your preferred dealer?
-We have spent over $40,000 this year alone on our race team, all of which are on Beta Motorcycles.
-We have produced over 300 "How To Beta Videos". All free to the public.
-When you choose "3 Seas Recreation" a portion of that sale will come back to our shop, all profit goes back into our race program and our KZbin videos.
-Since 2011 we have been a pioneer with the Beta Brand in the USA and spend hundreds of hours giving advice over the phone for Free.
-We are BETA ONLY when it comes to Off Road Dirt bikes, all of our attention is on Beta!
-We take brand new bikes out of the show room and give full riding videos, none of this is backed by the Factory or Beta USA
Beta Parts Link:
betausa.com/ac...
-------------------------------------------
NEXT LEVEL
🔔 Hit the bell next to Subscribe so you don't miss a video!
👍 Like Our Videos
💬 Comment Below
🏍️ Enjoy The Ride, Jared
-------------------------------------------
#3SeasRecreation #BetaMotorcycle #KYBForks

[@3SeasRecreation]

BETA PARTS 🛠⚙- Choose "3 Seas Recreation" for your Beta parts! Customers can now order all Beta parts and accessories directly from the Beta USA website. All parts inventories are in real-time. Customers can choose shipping options and the best part, selecting their preferred dealer. Why choose 3 Seas Recreation as your preferred dealer? -We have spent over $40,000 this year alone on our race team, all of which are on Beta Motorcycles. -We have produced over 300 "How To Beta Videos". All free to the public. -When you choose "3 Seas Recreation" a portion of that sale will come back to our shop, all profit goes back into our race program and our KZbin videos. -Since 2011 we have been a pioneer with the Beta Brand in the USA and spend hundreds of hours giving advice over the phone for Free. -We are BETA ONLY when it comes to Off Road Dirt bikes, all of our attention is on Beta! -We take brand new bikes out of the show room and give full riding videos, none of this is backed by the Factory or Beta USA Beta Parts Link: betausa.com/accessories.html ------------------------------------------- NEXT LEVEL 🔔 Hit the bell next to Subscribe so you don't miss a video! 👍 Like Our Videos 💬 Comment Below 🏍 Enjoy The Ride, Jared -------------------------------------------

[@tristanpenrose7248]

Hi Jarod. Your videos are exceptionally helpful. I'm based in New Zealand and have a 2021 Beta 430 race edition. Would you supply parts to New Zealand?

[@davidlawton1128]

Having purchased a 22 300 Racing, your uploads are v appreciated. Q. How much should the forks be pushed back up through the triple clamp? Is there a stock setting which you use?

[@3SeasRecreation]

Good Morning, thank you for watching our videos I appreciate it! Typically the KYBs mount to where the outer fork tube is just barely above the upper triple clamp. Since I can't upload a picture with this I'll suggest laying a nickel on the triple clamp and matching both sides to that height. Of course customers can change that to fit their riding styles. Hopefully that helps! Also, keep in mind that we offer discounts on OEM Beta parts and the accessories on the Beta USA website. If you are ever in need give us a call! Thanks, Jared

[@davidlawton1128]

@@3SeasRecreation Thank you. I'm in the UK so parts sourcing not viable option, but your upload content is greatly appreciated!

[@my-max-media7621]

You can put nylon spacer in after seal so the clip goes against it and no issues with clip on seal.

[@Garagecouchofjohnnyyz]

Hello and thanks for the videos. My question is I rebuilt my KYB forks on my 22 Yamaha 250x and did the inner oil change pumping out the air ten plus times all bubbles seem to be gone. First ride after front was stiff and bouncy. I stopped and opened the bleeder screws and a shot of air came out larger pshhht than normal. After that it seemed good. Is this normal?

[@3SeasRecreation]

I'm sure there was still some air built up in your forks. It's extremely hard to get it all out. I think you did the right thing. Enjoy the ride, Jared

[@burstcasino]

Gotta do this job on my '22 300 Race. Thanks for the videos.

[@3SeasRecreation]

Thanks for watching our videos, very much appreciated! Thanks, Jared

[@dannybolanos15]

Hey great video were can I find the fork oil suggested capacity I got a 20 300 race edition I believe there the same

[@3SeasRecreation]

Good Morning! Thanks for checking out our channel! Here is a cool chart that is really helpful on the forks: betausa.com/content/SUPPORT_PDF%27s/SST-2020-2%20KYB%20Fork%20Set%20Up.pdf Enjoy the ride, Jared

[@fmjdustin]

Did you have to back out the clickers. I followed this video but later say others say you have to back them out?

[@3SeasRecreation]

Good question! Yes they recommend backing the clickers out. In honesty I have not seen an issue when customers do not. You should be good to go. Enjoy the ride, Jared

[@motocrissenduro5651]

Best video !!

[@3SeasRecreation]

Thanks for the positive vibes! Enjoy the ride, Jared

[@my-max-media7621]

I'm going to assume these forks for Mark have been revalved/shimmed? ...being an AA pro

[@3SeasRecreation]

Good Evening, actually Mark runs stock suspension.. I can throw the kid on a 125cc (which he raced for a season) or put him on his 350 and he always seems to be a top 5 rider no matter what.. pretty discouraging for the rest of us lol... Enjoy the ride, Jared

[@mikaelstansis9427]

Do you have a video of changing oil in innercartridge or how you spell it, from sweden 😄

[@3SeasRecreation]

The next time I rebuild a set of KYB forks I will take the time to do the inner cartridge and I will film it! Thanks for watching, Jared

[@professionalpiddler1071]

Great video! Thanks

[@3SeasRecreation]

Glad you liked it! Thanks for subscribing! Enjoy, Jared

[@TheyDaredMightily]

These are the same forks as the 21 rieju mr 300 arent they? Cheers

[@3SeasRecreation]

Good Morning, I do not know much about the Rieju bikes but KYB does seem to come standard on quite a few different brands. I am pretty sure that the internal settings are going to be different between the brands based on the bike manufactures request. Thanks, Jared.

[@Sean85Laney]

Can you swap the guts of the kyb forks with the stock beta 500 forks?

[@3SeasRecreation]

Good Afternoon, thanks for the comment! You would have to buy the complete fork assembly, the KYB closed cartridge stuff does not work inside of the Sachs open cartridge forks. If you ever need Beta parts consider giving us a call, we can drop shipping anywhere in the USA! Enjoy the ride, Jared

[@dantejadman1856]

The year model of my beta race is 2021

[@dantejadman1856]

I have beta 300 rr race, how do I soften the front fork?

[@3SeasRecreation]

Good Morning, typically I would recommend a softer spring rate, there is a chart on the Beta USA website that you can check out for your weight. If you decide you want new springs we offer discounts on parts and sometimes free shipping if the order is over a certain dollar amount. [phone]. Thanks, Jared

[@nzmarkb8713]

Do you not wash the entire assembly

[@3SeasRecreation]

Good Afternoon, we did not drain the internal chamber so we did not wash that. Thanks for the comment and enjoy the ride! Thanks, Jared

[@Chris-uh3cm]

COME ON IF YOURE NOT GOING TO DO A FULL REBUILD DONT BOTHER MAKING A VIDEO!

[@3SeasRecreation]

Sorry to disappoint lol