2024 Honda Africa Twin Adventure Sports - Update, User Modes, Wear Areas and Potential Upgrades

[@heyspookyboogie644]

It’s funny how relatable your situation is. 2024 ATAS, manual, 260lb guy, lightweight son as passenger, similar attitude to avoiding cosmetic damage, aesthetics on luggage, etc etc.

[@Sasquatch_by_Day]

That's great you've been getting some riding in, it's been so hot here in New Brunswick I haven't been out much and I'm only at 1000km. I'm still completely lost with using the dash, your demo here may help me but then again I am King of the Luddites so maybe not. My top box just came in last week, holy crap it is huge! I am used to travelling light, all my camping gear is very small & lightweight from my days of multi-day long range hiking trips, I could probably fit everything for 2 weeks in the top box alone and not even need the side cases. I've been using Cena comms for years, it works great both to my passenger and to my riding partner when doing long trips together. I am due for both a new helmet and new comms, I'm going with the LS2 Advant X modular and the Cardo unit made specifically for that helmet. I've been wearing the LS2 Valiant for 8 years now and it is hands down the best helmet I have ever had but I like modulars.

[@coolhandchunk]

The dash just requires you to sit and play for 20 minutes and then it makes sense. The left side button pod take a few rides to get used to the button placement and get that muscle memory built up. I still fumble from time to time... but it's getting easier each ride.

[@Sasquatch_by_Day]

@@coolhandchunk You overestimate my abilities with tech good sir.

[@mikemills5144]

I have the same comm system, as well as the Cardo PackTalk and the upgrade to the system you have. Knowing what I know now I would pass on getting the Cardo. I think the sound, mics and noise cancelling are much better on the other units. Thinking about adding an AT AS to the stable, maybe next year...

[@olias6822]

The passenger foot peg brackets are removable which should make it easier to apply protection. I've been enjoying your videos and appreciate the info. Thanks!

[@coolhandchunk]

@olias6822 appreciate your interest and kind words. Cheers.

[@LayneSteighlee]

@3:54 get some 3M adhesion promoter and get automotive 3M tape...it will never come off.

[@heyspookyboogie644]

5:41 condolences for your tank. I know I’ll be pissed the first time I do something like that to mine. But if you plan to keep it long term and aren’t looking to flip it in a couple years for a new bike, then it just adds character for an adventure bike. (Unlike if it was basically any other kind of bike)

[@coolhandchunk]

@heyspookyboogie644 that is one way to look at it. I just know I get mad every time I look at the right side of the bike!

[@1136tscc]

Airwhawk worked for me on my vstrom 1050. Very little air in the bladder is key.

[@coolhandchunk]

@@1136tscc good to know. I might try that first before dropping big money on a new seat.

[@heyspookyboogie644]

8:00 Something that might look nicer, be more durable and be more useful could be wrapping the passenger peg frame in paracord. Though it would still be a pain with how complex that shape is. And if you really needed it, it’s there.

[@coolhandchunk]

@heyspookyboogie644 that's an interesting idea... might try it out.

[@HugovanderVelden]

My backpad was mounted with glue kit on the top suitcase by the dealer. Same set.

[@coolhandchunk]

@@HugovanderVelden glue kit? Interesting. How new is your bike and top box? Same design? Mine came with double sided tape that was already attached to the pad itself. I had to wipe down the box with alcohol to clean it and then stick the pad to it.

[@HugovanderVelden]

@@coolhandchunk June 15th 24. The dealer told me up forehand that it would not stick. They came with the solution to glue it. I suppose you can use any glue. It has to be a good one offcourse. Succes.

[@coolhandchunk]

@@HugovanderVelden good to know. If you happen to find out what kind of glue they used, please share! Safe riding!

[@HugovanderVelden]

@@coolhandchunk mine is 7 weeks old. Same topcase. It is not a special Honda glue kit. Its a general type but Works good. We in europe use the word kit as the kind of material , sorry for the confusion. Kit means its a thick glue.

[@coolhandchunk]

​@@HugovanderVelden no worries! Enjoy the bike.... I love mine!

[@WADER999]

I like your video and commitment . Does the passenger feel comfortable ? I would like to prepare as much comfort as possible in the rear .

[@coolhandchunk]

All three of my family members have riden on the back... no significant complaints. After a really long ride (300kms) my son does start to get 'unsettled' and moving around on the seat a bit. If both you and your passenger are 'big' people, you may find it a bit cramped. I have another video posted showing the passenger room.

[@WADER999]

@@coolhandchunk We are medium . I am 174 cm height, and my wife is 170 cm and 70 kg in weight .

[@coolhandchunk]

@@WADER999 you should be fine

[@eastman79]

Hey, this is wierd.. Had the 2024 atas since launch now and the topbox passanger back rest have never fell off, the black paint on the pillion footrests is not wearing as yours, and min have 6700km now. I hope like you that there is some winddeflectors for the atas soon but not likely.. Have a nice day and enjoy the great bike :) Greetings from Norway.

[@coolhandchunk]

@eastman79 thanks for the feedback. As for the paint wear, I am sure that it is likely more the result of my son not being careful getting on and off the bike. With the backrest pad.... I installed myself. I wonder if the dealer installs the pad they use a different adhesive or employ some special prep knowing there is a potential issue. Or perhaps the adhesive on my pad had degraded from storage???

[@mattyb7736]

I have covered the wear areas with clear stone chip plastic sheet. Go see your local panel beater or trim shop. Cheap and stops damage to the frame and tank where the legs and the fat guts i have hit the tank.

[@coolhandchunk]

@mattyb7736 yes, I am still planning to do this on the exposed painted areas (for similar reasons you have mentioned hahaha)

[@tripleaaa8662]

Try a touratech Standard Seat - I m happy with it (but it`s one piece)

[@Romenet310]

I don’t own the AT but on the Transalp, the power you have set for “P” is the lowest setting. Is it the same on the AT?

[@drewhbend]

have not had any paint wear on my passenger peg. odd.

[@coolhandchunk]

I started to notice the wear almost immediately. It's almost like it wasn't cured properly or is missing a coat. Not durable at all.

[@heyspookyboogie644]

Have you tried using any wireless android auto / CarPlay adapters?

[@coolhandchunk]

@heyspookyboogie644 I haven't bothered with the wireless adaptors. I didn't want to tear half the bike apart to hide the dongle and the extra cost with the wireless option was a tough pill to swallow compared to a $15 Anker cable.

[@mr.t9976]

Do the plastic or metal side cases need an additional bracket?

[@coolhandchunk]

The plastic side cases do not... they attach directly to the bike. The only to add is a small rubber piece that comes with the cases. The plastic top box needs a plastic mounting plate (comes with the case here in Canada) and it bolts directly to the rear rack on the bike. The metal side cases and top box require additional mounting brackets... I think they come with the cases.... but not 100% sure.

[@heyspookyboogie644]

Seems like awfully thin double sided tape for that application. I thought it would ship with that thick grey rubbery double sided 3M adhesive. 4:51

[@coolhandchunk]

@heyspookyboogie644 the stock double sided tape was thin. What you see in the video was the extra tape I added... both were about the same. I agree, the thicker foam type may have been a better choice.

[@heyspookyboogie644]

@@coolhandchunk hope you include it in an update if you go that route. Looking forward to seeing how this luggage setup works out for you.

[@Rayk76]

Superglue for back rest pad

[@z15crasal]

Get some 3M double sided tape with spray on activator/primer

[@coolhandchunk]

Worth a try. Thanks

[@wilsonjui1425]

@@coolhandchunk I used the outdoor double sided tape and it worked in 100+ temps. Stock double sided fell off in the sun and is worthless.

[@Chromatrix1]

Where did you get your center stand? I can’t find one anywhere.

[@coolhandchunk]

It's an OEM accessory. I ordered it with the bike and installed myself. I think SW Motek also makes one.

[@Chromatrix1]

@@coolhandchunk Cool thanks. All of the aftermarket companies are redesigning parts to fit the 24’ model and it’s going to be late fall until they come out. OEM tends to be a little heavier, but the center stand is critical. 👍🏼

[@coolhandchunk]

​@@Chromatrix1the OEM works fine.... and I am not that worried about the extra weight anyways.

[@thnksno]

The OEM center stand for the 2022 works fine. However, the 2024 ATAS is shorter. So, it's a bit of fun fitting it if all you have is the side stand to support the bike.

[@locomotive_motorcycles4434]

Corbin and done. Buy once cry once

[@Sasquatch_by_Day]

Concur. I've had Corbins on two different bikes and they are exceptional, especially as a bigger guy in that the sides/edges don't collapse under my weight and provide excellent support for my legs.

[@coolhandchunk]

I may still go that route.

[@mattyb7736]

I bought a corbin seat for my ATAS. If its supposed to be an example of a comfortable seat I'm seriously disappointed for the money I spent. Id have been better getting a custom job done at my local upholsterer

[@Sasquatch_by_Day]

@@mattyb7736 Corbin seats definitely aren't for everyone. If you are the type that likes a soft seat Corbins are not for you. I like a firmer seat, at 250lbs softer seats compress too much for me. The two Corbins I've had were the most comfortable seats I've ever had.

[@coolhandchunk]

@mattyb7736 this is exactly my issue and why I haven't gone ahead with any of the options.... I really don't want to spend that kind of money and then regret it. Thanks for the feedback.

[@thnksno]

You say you're a big guy, I assume you're over 6'. If so, your seat being in the low position isn't doing you any favors.

[@coolhandchunk]

Big guy = heavy!!! I am only 5'-9" with a short inseam. I am all torso.... the short seat is actually perfect.

[@geirfriis7268]

Honda motorcycles have a lot of problems!! It is just not acknowledged! It is not cool to criticize the Honda bikes. 3 premium Honda bikes since 2016 and all with problems. Dealer laughs and dismisses!

[@coolhandchunk]

I am quite sure all manufacturers and bikes have some sort of problems... especially as the tech included on these bikes increases. I opted for the extra Honda warranty for that reason...just for peace of mind.

[@charlesochler5800]

I had trouble with my suzuki. Shop had it 8 months and called me to come get it. They couldn't figure out the problem. I ordered a tps and a fuel pump and fixed it myself. Took me 10 mins to diagnostic with a multi meter and a pressure Guage. My point is they are not worth the trouble. My bike was under warranty and ended up out of my pocket

[@serhiyluchka6349]

I have the same bike and I put Vstream tour vindscreen and cuted it with grinder due to it was very tall and to me it looks very good if you want leave your email and I send you picture how it looks

[@coolhandchunk]

I will look that windscreen up. Thanks.