1979 Camaro in for a 5.3 LS and 5th gen camaro 6 speed manual THANK YOU FOR SUBSCRIBING! CONTACT, SERVICES, SOCIALS & MERCH! linktr.ee/hspe...
Пікірлер: 90
@Gotmath89 ай бұрын
OK I'm 15 minutes into this video and I'm completely convinced this guy could fix/engineer anything. Impressive.
@TimothyPhaff Жыл бұрын
I am most Impressed with your shop. Lots of basic tools that are needed to do a swap start to finish and the talent to work those tools. I also get the feeling your prices are within the average Joes pocket with reliable craftsmanship. I will look forward to watching more videos.
@kurtisstutzman7056 Жыл бұрын
I miss my 79 Z28, t-top Camaro (468cid/ th400), 9.90's in the quarter...!!! And my 72 SS(350cid/ m21 4-speed) corner carver... But due to my 22+ year long heroin addiction, they both 'went away', but I'm now 69+ months sober and am absolutely loving sober life...! Hopefully soon I'll be able to get em back...!!! Thanks, keep up your awesomeness and don't forget to compliment someone today...
@darksu69479 ай бұрын
That's a very long time to ride those orange capped rockets. I'm glad you made it back to earth my dude. I'm also a former iv user. My thing was speed and opiates, but I was always terrified of H. Suboxone makes it possible for me to have a normal life these days 😊
@kurtisstutzman70569 ай бұрын
@@darksu6947 Rock on...! Thanks, keep up your awesomeness and take care...!
@JonnyHolms4 ай бұрын
I really hope that 🙏 you are still going strong, my story is similar to yours and it's unfortunate what we give up when we are not ourselves..good luck my friend 😊
@kurtisstutzman70564 ай бұрын
@@JonnyHolms Just passed 77 months sober... Thanks, have a great day...!
@JonnyHolms4 ай бұрын
@@kurtisstutzman7056 awesome, keep it up as it only gets better, 👍
@jefflamb36685 ай бұрын
You make it look too easy. Great job. I've got 77z28 i want to do this to.
@HsPerformanceWi5 ай бұрын
Thanks! We've got a 79 T/A coming in this summer that will get a great deal more than this one did. Crate LS3/T56, full suspension, big brakes ect
@Brandon_obs_lsАй бұрын
@@HsPerformanceWiwhat harness u using
@GnarlyBlade3 ай бұрын
Awesome work man. Happy I came across this video; I've got a 77 Camaro project that I'll be dropping a 6.2 into and was curious about the TR6060 fitment. Trying to find a tr6060 has been a pain but I won't give up yet hahaha. Definitely took some notes.
@Jblaylock777 Жыл бұрын
Man I just found this video, and you answered so many questions that I had about my LS3/TR6060 swap in my 80 Tran Am. I’ve been scratching the internet for years trying to figure how to come up with a reasonably priced solution for the drive shaft. If you could post a link to the adapter you used I’d sure appreciate it. Also did you have to do anything to make the rear of the Ford drive shaft fit the 10 bolt? Thanks again, you got an easy sub from me, I’d like this video a million times if I could!
@HsPerformanceWi Жыл бұрын
www.fabbotfab.com/products/tr6060-output-flange-adapter?variant=43829186855158 If i remember correctly i needed a conversion joint at the rear yoke
@Jblaylock777 Жыл бұрын
Thanks man!
@thruitallauto2538Күн бұрын
If ya had two of you, You could conquer the world
@JonnyHolms Жыл бұрын
I've been subscribed to your channel for a while but this is the first time that im commenting and just wanted to say that, You are good, you obviously know your stuff but it's also the attention to details that makes the difference and your attention to big and small things is what in my opinion makes the difference, keep up the great work my friend and I'll keep watching 👀. Thanks.
@lamm442 Жыл бұрын
Nice job, you didn't hide anything or bullshited. Be proud you got talent.
@reignblombergh6959 Жыл бұрын
Did you not rebuild the engine
@HsPerformanceWi Жыл бұрын
nope
@Username44572Ай бұрын
Badass video brother bout to do a 5.3 swap on my 1980 trans am
@Freeman-eo2lx8 ай бұрын
Dent the header tube make it work come on it don't effect horse pressure you tube proved that long time ago
@19yenko57 Жыл бұрын
So basically my dreams of doing this with a standard shift in my ONE OWNER 1979 Z28 isn’t going to happen with my less than good knowledge of how to make this sh!t happen… Dude!!! How much do you charge to convert one?
@HsPerformanceWi Жыл бұрын
shoot me a message at facebook.com/LSXPERT
@AngelRodriguez-zv1zk5 ай бұрын
Hey, would you be interested on doing an ls swap on a 78 tram sam ?
@tylerrhey9558 Жыл бұрын
Will a tr6060 fit on a 4.8? I noticed in another comment you said to use a ls3 flywheel and clutch. Would all of that work for my 4.8?
@HsPerformanceWi Жыл бұрын
yes same configuration as used here
@tylerrhey9558 Жыл бұрын
Okay just wanted to check, thank you I appreciate it.
@jasonhunter26112 ай бұрын
I hope you're not using that truck intake
@anthonyakers63749 ай бұрын
Could anyone find me a link to that intake manifold?
@romangranite7410 ай бұрын
Hi I did ls swap tr6060 on my 70 camaro .I have noticed that my shifter is to further cuz I use mgw shifter.so like to know what you guys use for your 2nd gen?
@HsPerformanceWi10 ай бұрын
stock 6 cylinder camaro tr6060 shifter cut down and re-welded to fit
@Jae_in_the_888 ай бұрын
Bruce look back like let her rip tatter chip
@CamaroMan793 ай бұрын
I couldn’t see in the video (my connection kept lagging) but is that intake fitting under the stock hood or do you have a cowl induction?
@HsPerformanceWi3 ай бұрын
stock hood
@idaho2ndgens240 Жыл бұрын
Some awesome work you do there. I am doing a 70 Camaro LSX swap, building a LS7 wet sump basically. I see you did the drive by cable and was wondering your thoughts about drive by wire vs drive by cable. I like the way you rotated the throttle body, looks like it would be better for cable routing too, even if you didn't do the cruise control. Keep up the good work, love your channel.
@HsPerformanceWi Жыл бұрын
No opposition to drive by wire, just the ecm I was provided. Drivability tuning with larger cams is actually a little easier with drive by wire
@freshbutplain114410 ай бұрын
Holy smokes man! Great job!! What time frame did it take from start to finish?
@HsPerformanceWi10 ай бұрын
swaps usually take me 4-6 weeks with waiting for for parts. sometimes you don't know what you need until you get to a certain point of the build.
@danewilson7 ай бұрын
You didn’t have to clearance the trans tunnel (with a hammer) to clear the trans?
@HsPerformanceWi7 ай бұрын
had to cut quite a bit over the top of the trans and rebuild the hump
Old school hot roddin! Nice work sir! You answered so many questions I have about my project. You went with an LS3 clutch, but what slave did you use?
@servandobustillos902319 күн бұрын
Hello H been subscribed to your channel for a long time. I am currently swapping a 6.2 LS3 with TR6060 out of a 2013 camaro ss to my 1973 firebird. I am having trouble with the clutch, how did you adapt the hydraulic clutch of the TR6060 to this camaro? Thanks!
@HsPerformanceWi18 күн бұрын
this amzn.to/3XGmPwX and this amzn.to/3Xo8PGB
@servandobustillos902317 күн бұрын
@@HsPerformanceWi Thanks a lot H!
@servandobustillos902313 күн бұрын
Hello H, I´m having trouble finding a driveshaft that works for me. I see in the video you installed one from a 2004 ford explorer, did you have the factory GM 8.5 diff? Was the explorer a 4x4 v6? V8? And what did you use for the yokes? I bought the fabbot adapter you mentioned in other comments for the transmission . Thanks!
@HsPerformanceWi13 күн бұрын
@@servandobustillos9023 stock rear diff, nearly all swaps need a conversion U joint to make things work exploder was a 4x4
@servandobustillos902312 күн бұрын
@@HsPerformanceWi Thanks a lot!
@nicholashollerman74585 ай бұрын
What oil pan did you run
@HsPerformanceWi5 ай бұрын
amzn.to/4biBvGg
@tlinzin87 Жыл бұрын
Where is your shop located man??
@HsPerformanceWi Жыл бұрын
Central Wisconsin
@tlinzin87 Жыл бұрын
@@HsPerformanceWi with all respect, you are a bad ass madafacker man, I learn a lot from your videos, you are zero bullshit showing how to fix shit up, I wish I could bring my vehicles to your shop, thanks a lot man!!
@HsPerformanceWi Жыл бұрын
@@tlinzin87 Thank you so much! 🙌 subscribe and I'll keep em coming 👌
@chrisbarg54917 ай бұрын
that is one clean install! Very impressed with your attention to detail
@paulfrankelphd8 ай бұрын
The attention to detail and parts cleanup is impressive.
@KCStrain10 ай бұрын
Very nice swap! how did you end up securing the shifter? Did you use the weird factory 2 prong things that poke out the back of it? Im at that stage with my Gbody swap.
@HsPerformanceWi10 ай бұрын
the 2 prongs ended up on top of the floor, and we didnt have the O.E. isolator bushing so i ended up making my own with a thick rubber isolator with molded studs.
@nightshiftresto315910 ай бұрын
How did you hook up speedometer from cable to non cable transmission? Also very nice swap!
@HsPerformanceWi10 ай бұрын
NVU cluster, photos here instagram.com/p/CskHflUMod4/?igshid=MzRlODBiNWFlZA==
@selflove64353 ай бұрын
Nice swap! 🔥 what drive shaft did you use? And where did you get that adapter piece on the back of the trans that connects to the drive shaft? 👀
@HsPerformanceWi3 ай бұрын
shaft is 2004 explorer 4x4 rear. adapter is fabbot www.fabbotfab.com/products/tr6060-output-flange-adapter?variant=43829186855158
@selflove64353 ай бұрын
@@HsPerformanceWi oh wow! That’s super creative man, I applaud you. I wonder how you got in touch with Fabbot because they never answer they’re phone 🙃
@HsPerformanceWi3 ай бұрын
@@selflove6435 I don't answer mine either
@selflove64353 ай бұрын
@@HsPerformanceWi 😂😂
@danewilson Жыл бұрын
So how did you put the console back in after moving the shifter back so far? Or did you remedy that by cutting and shortening the shift linkage?
@HsPerformanceWi Жыл бұрын
the owner of the car put 5th gen camaro console and seats in it, shifter lined up perfectly for that
@joaquinquintana180710 ай бұрын
Does the transmission have to be in a certain gear vefore mounting the shifter and assembling? Confused how to tell wich gear is correct.
@HsPerformanceWi10 ай бұрын
there's no gates in the shifter itself so it doesn't matter what gear the trans is in
@umakemerandy3669 Жыл бұрын
This is fantastic, the decisions made
@kerryneville52908 ай бұрын
keepin it real
@caseymckee2814 Жыл бұрын
"promo sm"
@mrjones528 Жыл бұрын
What flywheel did you use? I have a gen4 5.3 and tr6060 from a newer camaro and read that I would need to run a special flywheel. Great video
@HsPerformanceWi Жыл бұрын
2010 6.2 camaro clutch and flywyheel
@mrjones528 Жыл бұрын
Thank you. You just saved me a lot of money. Did you have to adjust the distance for the throw out bearing?
@@HsPerformanceWi awesome thanks. I have never done but i heard ls2 flywheel with ls7 oem clutch. Ill be trying soon
@HsPerformanceWi Жыл бұрын
@X04SVTX just use ls3 camaro flywheel and clutch
@x04svtx Жыл бұрын
@@HsPerformanceWi yes sir, i will try that. I was just about to buy ls7 clutch etc. hopefully ls3 cheaper etc! Thank you!
@trentdawg2832 Жыл бұрын
I love 2nd gen camaros…..all of em
@FranksShitBoxCollection8 ай бұрын
Found a TR6060 out of a 2011 V6 Camaro at the junkyard today and im wondering if I could use it behind my 2003 5.3L? If so im assuming I'd just order a clutch kit for an LS1?
@HsPerformanceWi8 ай бұрын
v6 trans will not bolt to a v8
@trentdawg2832 Жыл бұрын
Nice job man….that kid is gonna have a bad ass ride