Thanks for the video man!! How is your N54 going? Do you still have it?
@turbolabamerica3 жыл бұрын
Yes, 193k miles. Its in great shape. I want to go back through the turbos when I get my truck back
@turbolabamerica3 ай бұрын
Yes. I since converted it to single turbo
@davinroussel5543 жыл бұрын
Awesome I have been on the fence on these 19t and contacted you on the matter of fixing them if I go this way.👍👍
@TeyronP3 жыл бұрын
Can’t wait to buy my set of 19ts now, been following your channel waiting for a video like this! Thank you, you have my support.
@milehighboost55213 жыл бұрын
Great information. Used your rebuild kit for my stock turbos with the wastegates and they have been feeling strong. I did plan on upgrading to 19ts once i broke them but I seriously doubt i can anytime soon so i may just swap them anyway. Looking forward to the next video to see how i can tell if i need to rebalance if and when i do this upgrade
@eric49a3 жыл бұрын
Ah very good information! Thank you! Have you checked out the Chinese 17T turbos that are all over eBay and what not? Same problem?
@supraboy823 жыл бұрын
love the video.. thanks for doing this. do one on the 17t versions!
@humble18353 жыл бұрын
Thanks for all your work on these turbos. I know there are a lot of guys making the switch to upgraded turbos. Guess I'll pull my turbos and grab a couple kits from you. 👍👍👍. Also do you know for a fact that the tdo4hl turbine doesn't fit the housing? If I'm going to pull the turbos and try and bullet proof them I might as well upgrade?
@jwolff91533 жыл бұрын
Where's the second video checking the balance? Also how much would it cost to send you a set of brand new 19t's for the preventive kit along with balancing?
@TheNinjaSpartin3 жыл бұрын
Do yo think it would be possible to put a TDO4HL turbine wheel in these housings with machining? I have always wondered if possible as I imagine it would reduce the exhaust side restriction quite a bit.
@robertvasile37703 жыл бұрын
Thank you,you are the best💪
@rudyarias86383 жыл бұрын
Awesome work brother
@turbolabamerica3 жыл бұрын
Did you get your turbo on
@Martin-ci4ts3 ай бұрын
the viv 19t v3 have this problem?¿
@ashleys741611 ай бұрын
Do you still sell these kits too fix 17t. I'm needing to m to rebuilt my n54 rear turbo. Axial okay. Thrust bearing kit be okay?
@jisanghyun944 Жыл бұрын
Hey i bought the upgraded thrust bearings for my new turbos. But I have no idea how to install them. Can you provide us with instructions?
@edwardwerley88313 жыл бұрын
Great info. I will be purchasing kits. I have 2 new 19Ts, and do you recommend the complete rebuild kit or just replacement parts kit? Also I have heard that the oil seal ring so be changed to a "overlapping" seal to avoid oil leak. Do you agree? If so do you sell this, or is it apart of your rebuild kit?
@turbolabamerica3 жыл бұрын
The turbo already has the staggered seal. The reason they leak is from the failure of the parts shown, when the parts fail the turbo assembly moves in the axial direction and is mashing into the seals causing the sides of the piston rings to wear
@edwardwerley88313 жыл бұрын
thx! I think I might go with the entire rebuild kit from you to make sure I am solid.
@dixiemae50423 жыл бұрын
👊🏻💪🏻
@turbolabamerica3 жыл бұрын
I haven’t seen you comment in a while welcome back
@mikestrucks3 жыл бұрын
@ Dixie Mae 💪🏻💨💨💨
@cptrey3 жыл бұрын
So do you have to rebalance them after upgrading the thrust bearings?
@ltdasilva933 жыл бұрын
Hey brother I have a couple of questions Im hoping you could address but first off thank you for this information. - Does this kit work for the eBay 17T's as well (Specifically vivautoparts, or any relevent 17ts with the 6 blade) - viv-autoparts states their 19T's on ebay have the upgraded harwdare, i know your turbos didn't come from the same seller, but would you believe they actually do? Thank you kindly
@frankjordan60863 жыл бұрын
Do a video on the 17t!
@chris883313 жыл бұрын
So with this thrust bearing upgrade can they support the 900hp quoted or do they need more work to reach say 700whp
@boostedfb6brah6093 жыл бұрын
Have you done many rebuilds or modifications to the PTE6262 ball bearing turbocharger?
@fiiianknight3 жыл бұрын
Great content 👍
@SyncedCyberSoule8 ай бұрын
updated links? thanks in advance
@reda198913 жыл бұрын
Great video! please post link to upgraded parts and quality check video for these. I have a set of brand new "19T" and im kinda scared to install them with their high failure rate. If i can upgrade them and be on the safe side that would be very encouraging. I also noticed that mine have a part number showing ''19TB'' which seems to be some sort of revision of the early 19T from the same chinese suppliers, however i have no idea what have been revised since their first ''19T''. I think the early version had some issues with oil drain or feed port but not sure if anything else has been changed.
@turbolabamerica3 жыл бұрын
Just posted
@brandoneubank59523 жыл бұрын
What do you think of 17t? Need your input is it same kit?
@n54nz22 жыл бұрын
So are the v3 or v4 19ts good now or is this review done on them ?
@mikestrucks3 жыл бұрын
Nice one 👍🏻
@sr20dett10003 жыл бұрын
You should do a review on the b7/b8 A4 K04 turbos.
@codyclarke54063 жыл бұрын
What’s your opinion on the new version 3 19T?
@turbolabamerica3 жыл бұрын
They never mentioned if they changed the oring to the correct size. They really need to be checked anyway. Because the parts haw change hands too many times to know of someone is being truthful about what they are selling
@stevemurch69743 жыл бұрын
Necessary to rebalance ? Seriously you rebalance everything even if its stock and keeping the same orientation.
@dannyvera11453 жыл бұрын
Hey is there a way I can send you my 19Ts for the rebuild and if so whats the estimate price? I know you probably get asked this many times but I literally asked everyone here in Chicago and no one wants to touch them because they’re from China.
@turbolabamerica3 жыл бұрын
We can upgrade them or repair them if needed. It depends on the extent of the damage but it’s possible fir it to med cartridge replacements but I can try to repair them for 375-650 for both
@dannyvera11453 жыл бұрын
@@turbolabamerica the ebay 19ts would be brand new in the box still. I would hopefully want to get upgraded with your rebuilt components.
@dannyvera11453 жыл бұрын
Is there a way I can email you or contact you?
@slicktop2jz8553 жыл бұрын
Love hearing a yank use metric 👍
@turbolabamerica3 жыл бұрын
I’m from the south
@husainamin83773 жыл бұрын
These turbos are junk, car put 450whp on stock turbos, while it put 430whp on 19T. Something is not correct with those turbos, could be restrictive turbine housing or wheels design.
@justlolz14113 жыл бұрын
You were tuned?
@justlolz14113 жыл бұрын
With supporting mods? I made 570 on e and fbo with 17ts
@husainamin83773 жыл бұрын
@@justlolz1411 Tuned, FBO, meth injection on 98 RON. 17Ts is better than 19T first batch. They released V2 with 6+6 compressor wheels
@Xtremecarfan101883 жыл бұрын
Umm yeah, idk what happened but you shouldn’t have a decrease in power from upgraded turbos even on the same tune. A buddy of mine switched from stock turbo FBO custom tune and just changing the turbos he gained like 80whp on the same tune.
@husainamin83773 жыл бұрын
@@Xtremecarfan10188 That supposed to be. I'm still digging into this issue, could be something else came into after replacing the turbos. Who knows.