Not all heroes wear capes amazing video man really cool to hear a pros opinion on them
@jonfield77773 жыл бұрын
Thank you this played a huge part in my decision making process. I hope to get upgraded turbos from you soon.
@abelucious3 жыл бұрын
VIV addressed these issues after they saw this video according to them, I installed the updated version of these about 5 weeks ago and I'm tuned for 21 psi boost, we'll see how long they last,
@Rm3c3 жыл бұрын
Any updates? Mine’s arriving next week 👌🏽
@abelucious3 жыл бұрын
@@Rm3c they’ve been working perfectly, I haven’t been pushing it much because of wet winter roads already, but I’ve been to 22 psi boost a few times and the power comes on till redline, so far so good , they’re louder than the 17ts and make really nice induction noises
@kinginmortal57203 жыл бұрын
@@abelucious u have a link to this turbos?
@abelucious3 жыл бұрын
@@kinginmortal5720 2021 VIV V3 TD04-19T Billet Twin Turbochargers for BMW 335i E90 E91 E92 E93 N54
@abelucious3 жыл бұрын
Look that up on eBay
@lestermackay4333 жыл бұрын
Can you add the link to the rebuilt kit specifically for these turbos?
@dennispiet83553 жыл бұрын
super explanation, I must say, great work
@diandobrev6807 Жыл бұрын
Please review of the V4
@ben70203 жыл бұрын
Thanks for the N54 video 👍
@josephgy53243 жыл бұрын
Hey turbolabs! Do you by chance sell upgraded/rebuilt n54 19t turbos? I would be interested in a set. That or likely having a set sent to you.
@davispaul823 жыл бұрын
Very informative and keep making these videos. Something I'd like to know is how to balance the turbos when you put the back together and will there be a part 2 as others have commented?
@artusheganyan84593 жыл бұрын
Wheel shaft is mitsubishi volvo sab? Td04 19T?
@tysonsevo54313 жыл бұрын
These are not the upgraded ones from viv autoparts
@HeirByFaith3 жыл бұрын
You mentioned that you were gonna balance these? Would have liked to see how bad they were from the factory in the video...
@skatepark023 жыл бұрын
I've got the 17T on the way. Would yo say that I should get these balanced? Great video by the way
@vtecnegro853 жыл бұрын
Dang that turbine side on the 19t is pretty small compared to the compressor.
@BEYTEK3 жыл бұрын
Another Awsome vid man.
@tighematthew3 жыл бұрын
Awesome info cheers
@alexheriberto12593 жыл бұрын
Appreciate the video !!! 👍 had alot of questions on these turbos and u awnsered all thanx ! Any other turbos u recomned that are cheap but a lil better then these for my n54?
@ferilisociedad52743 жыл бұрын
Hi turbo lab, thanks for this video, I have no experience in this field, have a stock N54 engine and wanna make the upgrade turbos, would you recommend this 19t blade ones with the upgrade kit? Or should I go with other brand? I wanna make around 550 to 600 hp without pushing turbos to the limit, it’s gonna be a daily driven 135i, thanks for your time
@facemann_e9373 жыл бұрын
17t 6blades have to have actuators rods positioned for optimum waste gate open and close. Also keep tune under 23 psi 24 25 with E85 mix. Definitely a convo to have wit your tuner.. I suggest Doc Vu Just a deeper thought to rebuild the chra center sections with turbolabs 17t turbo rebuild kits..These Chinese units theyre deliberately using fail parts to sell to us...guess they want repeat buyerslol
@BartjeMssls2 жыл бұрын
Is the viv 19t using the same thrustbearing as the 17t?
@TopG823 жыл бұрын
What’s the price if I want you to do the same to my 19t ? Including a full rebuild kit for both turbos
@silver_n54423 жыл бұрын
I emailed him and he said $250 to rebuild a set of turbos and $125 to deburr both housings.
@TopG823 жыл бұрын
@@silver_n5442 I tried to contact turbo lab through Facebook but they didn’t answer Can you give me his email ?
@TopG823 жыл бұрын
@@silver_n5442 Im not a 100% English speaker so what do you mean by $125 deburr? What is that ?
@SupraSkylineHKS3 жыл бұрын
Planning on getting these 19t's, all I need your kit is that all or is there parts you recommend getting that your kit doesn't include???
@adrielsilva67782 жыл бұрын
Where are u located? Florida??
@arkadiushl3 жыл бұрын
Soo... From what I understand upgraded thrust bearing kit makes these 19t reliable if we push it above 20psi?
@turbolabamerica3 жыл бұрын
The spacer size is the main pony of failure but yes it makes it reliable for any boost level below the point of surging
@97cammedgtp3 жыл бұрын
do they make the thrust bearing and collar upgrade for the 17T or just the 19T?
@aaronhughes66403 жыл бұрын
So if I’m correct the turbos do not need to be rebalanced after the rebuild kit?
@setterlee3 жыл бұрын
Good info, I was thinking to go single turbo with my N54 but I don't want to loose the quick reaction of the twins... This apply to the 17t too? And, another question... I'm from Chile, can I buy this turbos, send to your location to make this upgrade and you send me after that?
@marcusmenge61913 жыл бұрын
What do you think about running an oil restrictor? Or do you believe your replacement parts will eliminate blowby via excessive oil pressure?
@ltdasilva933 жыл бұрын
I need an answer to this :D
@marcusmenge61913 жыл бұрын
@@ltdasilva93 I've done more research and since changed course I ordered a doc race dr700 kit. However it is paramount that the stock pcv system both high and low are eliminated and an external system is ran.
@marcusmenge61913 жыл бұрын
@@ltdasilva93 I think a restrictor would be a workaround to a larger problem
@thelightning873 жыл бұрын
Whats your take on the compressorhousing? It's still a small stock snail with a 1inch exit.
@ltdasilva933 жыл бұрын
Hey the viv auto parts eBay 19ts specify that they come with the dual oil port assembly and 14mm upgrade as well. Any experience with those?
@tighematthew3 жыл бұрын
I just brought those i will find out in a few months let you know 🤞
@n54andrew3 жыл бұрын
@@tighematthew ever find out??
@tighematthew3 жыл бұрын
@@n54andrew putting them on soon just arrived yesterday
@hellaspower75463 жыл бұрын
@@tighematthew any update on this?
@tighematthew3 жыл бұрын
@@hellaspower7546 just going through turning now so far no problems 👍
@artusheganyan84593 жыл бұрын
Can you add link for wheel shaft? Please
@turbolabamerica3 жыл бұрын
The shaft is unique. I don’t know if I can get that part easily but I’ll look into it
@edwardwerley88313 жыл бұрын
Great info on the video for everyone getting 19T. I recently purchases the rebuild kit to install prior to installing the turbos. would you replace the seal with a staggered if I have an extra?
@turbolabamerica3 жыл бұрын
The one I went through here already had a staggered seal
@Darius01943 жыл бұрын
Hey man, you have the 19t link in your bio, would you recommend those???
@cupompa3 жыл бұрын
What turbo for the N54 would you recommend as an OEM+ upgrade? So basically a turbo that exceeds in every measure over the stock Mitsubishi twin turbochargers?
@JP-st8sf3 жыл бұрын
Pure turbos
@WhiteE7035i3 жыл бұрын
RB Turbo
@cupompa3 жыл бұрын
@@JP-st8sf Thanks!
@cupompa3 жыл бұрын
@@WhiteE7035i Thanks!
@WhiteE7035i3 жыл бұрын
@@cupompa I would email or call Rob “RB Turbo”. His customer service is bar none and will recommend what you need based on what power levels you want. He offers really good discounts as well. RB and Pure actually build and balance their turbos unlike other companies that source it out. You can’t go wrong with either one. Good luck!
@BVonBuescher Жыл бұрын
Can’t believe a company called turbo lab of America is recommending Chinese turbos And I’m actually going to buy them
@pennypacker20003 жыл бұрын
what about the 17t ?.. do they have the upgraded internals?... nice video
@turbolabamerica3 жыл бұрын
I’m not sure, one of the people I’m talking with has a set of 17t he’s trying to repair but he is facing a problem of the parts not being the same, the bearings and piston rings are different so the parts would have to be recreated.