3D Printed Photo Booth / Photo Sweep

Here's how you can start taking better photos/videos of your 3D Prints with this simple but extremely useful 3D Printable Photo Sweep - quick DIY project
Photo Sweep Stand by HPaul
www.thingiverse.com/thing:363...
Thanks again to Elegoo for Sponsoring today's video!
Elegoo Mars 3 ➜ shrsl.com/33ha2
Elegoo Mercury X Bundle ➜ shrsl.com/33ha6
Elegoo Mars 2 Pro ➜ geni.us/erkc
Elegoo Neptune 2 ➜ geni.us/2MWuj
Elegoo Saturn ➜ geni.us/ABTdtjm
bit.ly/367ROqy
Elegoo Mars ➜ geni.us/GGUV82l
Elegoo Wash & Cure Station ➜ geni.us/hgyLGW
Elegoo ABS Like Resin ➜ geni.us/Lb9kl
Elegoo Washable Grey Resin ➜ geni.us/Ufg4
ResinLapse - Record your own ResinLapse timelapses ➜
resinlapse.bigcartel.com/
Checkout my patreon for all of my Resin Settings / Support Settings
My PATREON ➜ / unclejessy
Links on this page include affiliate links which help support the channel
Wham Bam Slap mats ➜ whambam3d.com/collections/acc...
Wham Bam Flex Plates ➜ whambamsystems.com/fbs-for-re...
Starro by ChaosCoreTech ➜
/ chaoscoretech
Starro by Wekster ➜
/ chaoscoretech
Toll Collectors by Loot-Studios ➜
www.loot-studios.com/
Agama Rising by Archvillain Games ➜
/ archvillaingames
X23 by Eastman ➜
/ eastman
Studio Lights amzn.to/2VZYIMJ
RGB Light amzn.to/3CYvXQV
Links on this page include affiliate links which help support the channel
________________________________________________
Interested in other resin 3D Printers?
Peopoly Phenom ➜
www.matterhackers.com/store/l...
Epax X10 ➜
epax3d.com/products/epax-E10?...
Elegoo Mars ➜ amzn.to/2xvAJVr
Anycubic Mono X ➜ geni.us/dmQqQ
________________________________________________
Some Additional Items you will want to consider for Resin 3D Printing ➜
Full List - www.amazon.com/shop/unclejessy
Disposable Gloves - amzn.to/2Xjaxfo
Plastic Spatula - amzn.to/2Ijrhuy
Metal Spatula - amzn.to/2XgiHoS
Isopropyl (IPA) - amzn.to/2KoTsdY
Pickle Container - amzn.to/2KkWsrH
Funnel - amzn.to/2IjrrCa
Paint Filters - amzn.to/2XcpK1V
________________________________________________
Interested in getting a 3D Printer? Here are some that I use ➜
Ender 3 amzn.to/2GcCECB
CR-10 amzn.to/2Id9o1T
CR-10 S4 amzn.to/2UgWMbL
TinyMachines3D.com
www.tinymachines3d.com/?rfsn=...
________________________________________________
My PATREON ➜ / unclejessy
Buy Me a Coffee ➜ www.buymeacoffee.com/UncleJessy
_______________________________________________
Gear I'm Using ➜ www.amazon.com/shop/unclejessy
________________________________________________
/ unclejessy4real
Twitter ➜ / unclejessy4real
Instagram ➜ / unclejessy4real
Facebook ➜ / unclejessy4real
KZbin ➜ / unclejessy
________________________________________________
Thanks for watching!
SEND STUFF TO ➜
Uncle Jessy
PO BOX 629
25 Goodburlet RD
Henrietta, NY 14467
Music provided by Argofox:
Xublime - Ocean
• Xublime - Ocean [Argof...
#DIY #3DPrinting #UncleJessy
Quick Links

[@par2228]

I am so printing these, my primary hobby is knifemaking and have had a hard time taking pictures of them, this will help a lot.

[@mikesilluzio9399]

Great video, Jessy. I do MISS your FDM content so thanks for throwing in a little bit for us that did not be get into resin. Also, GREAT to see your finishing skills get some screen time. I don't mind seeing the raw prints but I forgot how great your finishing looked. Super job.

[@NatesMiniatures]

Jessy this is so freaking awesome, I have been finding it a little difficult to get some backgrounds to sit up when taking thumbnails for videos. Once my current print is done I will print them on my Ender 5 plus, might have to do multiple just because it is always good having backups. Thank you!

[@SuperMakeSomething]

Great tutorial and very nice results! Always great to have a setup where you can customize the background and control the lighting!

[@ethansdad3d]

The photos and videos look great with the background. What an easy setup. Thanks for the tip!

[@AstrocyteCosplay]

Fantastic idea! Thanks so much for this video. Going off to print some soon. They look so easy to use. Husband paints Warhammer figures and I do cosplay props. We have a photo box however he is finding his army is already getting too big to take group photos. This might give us another option. Also love the different lighting options.

[@tdougler]

These are so key for taking pictures of 3D prints, especially minis! I built one a few years ago for eBay listings and miniatures (3D printed). I love the clamps on this file though, so I may have to try it out.

[@offearth3d]

Yup, Printing and using this! Also, AWESOME Paint work on Starro!

[@animexartist1]

ok, I need to print this right away :D thanks you so much for sharing!

[@melsminiloft]

This was EXACTLY what I was looking for! I have been taping the paper to a bookshelf and it just causes the paper to have tons of tape on it and takes forever to assemble. I am printing this ASAP

[@WhamBamSystems]

Love it, now to scale it up x5!

[@avejst]

Great design 👍 Thanks for sharing your experience with all of us 👍😀

[@alessandrodicesare2970]

so useful! thank you!

[@TheCreativeCollector]

I need to try and find a way to do this for the 1/4 scale pieces I make and paint. Right now Im having to use cloth backdrops.

[@ShahriarFarkhan]

Thank you for this!

[@trashfirefuneral]

as "the miniatures person" of my group, people ask me this more than anything else: How do you get those pictures? I love your janky first gen version but I was so relieved to see the upgraded version tbh

[@UncleJessy]

Oh man the janky version was okay at best. The new one is by far and away soooo much easier to work with

[@hendrikg6003]

Funny. I just printed a week before exactly the same one :D I used toothpics to connect the parts. Filament is better I guess, that should be by hand when assembling. great vid!

[@cybernetix86]

Nice video, you could also buy some grey paper as a neutral backdrop. With colored lights you can get great results.

[@stldenise]

Wish I had seen this before I made my husband install an IKEA window shade (yes!) in front of my work bench. I just roll that sucker down like it's school picture time! I think I was using something like that first paper holder, a real PITA to get set up. But I've also used tri-fold display cardboard (like for science fair), poster board propped on a tool box, and a roll of shelf liner. The nice thing is whenever a kid has needed posterboard for a class project they can go raid mom's photo supplies.

[@krzysztofmathews738]

Very useful!

[@ahlokecafe_articulate]

This are so much goodies

[@fernandogha]

Im printing one for me right now!

[@KarrMcDebt]

You could replace the colored cardstock with a diffusor panel and then put an LED strip behind it for soft, colored, backlighting if you were so inclined.

[@markwilliams5654]

I remember printing one of these about 5 years ago lol

[@plasticarcade]

Your paint job actually turned out really great, you should keep painting.

[@fireflare260]

You have the chaos core tech link for Wesker's pateron too.

[@sespider]

I'd like to know how you time-lapse your resin printing. It's soooooo smooth.

[@Big-Monkey-Man]

Well my Etsy pics are about to improve. Thanks!

[@pradeepjewelsmith6671]

Thank you so much Jessy Anycubic photon ultra dlp. Review please.

[@dougsundseth6904]

As a professional product photographer, a few points: 1) I use continuous paper in rolls for most of my photography. The big name in the business is Savage, which can be found at most photography stores in a variety of colors. 2) Continuous paper gets scuffed and creased a lot; be prepared to replace it regularly. (This is why I get rolls.) Before replacing, remember that you can use both sides of the paper. 3) For miniatures photography, you generally don't want to use a photo box, because they're designed to bring light in from the top. For minis, you want light from the front. 4) Watch out for your exposure. With light backgrounds on an automatic exposure mode, the camera will "correct" for the brightness and underexpose. (I'm seeing this in a lot of cases here.) Dark backgrounds will give you overexposure. 5) Cameras also "correct" for color casts, so if you use strongly colored backgrounds, you'll want to include a neutral reference so you can "uncorrect". 6) Short focal length lenses (specifically including many camera phone lenses) have a deeper depth of field (welcome to optical physics). If you're having problems with depth of field, try your camera instead of your DSLR.

[@__--JY-Moe--__]

U the Man UJ!!

[@3DMusketeers]

I WILL NOT SHOW THIS TO AMBER! Cardstock at less than $1 that is dangerous sir! Painting looks good, keep it up! I need to learn it myself!

[@Tbaz777]

Thanks for the recommend on the Elegoo Neptune 2 I'm really enjoying it. However after having it now for 3 weeks there's now a knocking sound coming from the Z stepper motor. Any ideas/help? Cheers

[@heliumfreak5364]

Hi could you do maybe a small video on the best printer options if you don't want to get locked into using chitubox? Like I don't mind using it to print but I don't see why I should have to use it to slice and do everything else. I was keen on the Mars 3 until you mentioned about being locked to chitubox

[@stephencase5160]

It's a tiny psych wall. At least that's what we call the full-size ones in the photo studio.

[@thespectatorsproductions6709]

Do you have any affiliate link to buy the finished product for those who don't own a printer but are interesred in those ? Thanks for all you do for the community. Great content and always both entertaining and informative.

[@Dexterbostic]

Love your ch!!!! Am big elgoo!!!! Do u have a good Suggestion for a slicer program for my endeo three am working a little with FDM Again

[@TAiiNE]

Speaking of painting. Exactly what kind of primer are you using for the 3d prints? I have found so far every kind that I have used, from brush on to spray (current one is the rust-oleum 2x ultra cover paint + primer black, label clearly says it bonds to plastic) goes on a bit thick, still have an issue sticking to the print, and spray on often leaves behind bubbles on the print and 'fills in' details. Plus when I do get the print primed, I find paints still have a hard time sticking and/or starts to peel off later on. All I'm using so far is basic elegoo resin for my printer, but I can not find a good primer that works, and at LEAST doesn't leave annoying bubbles on the print, it seems no matter how far away I spray the darn things it still leaves bubbles. also... would you be willing to sell the printed/assembled clamps? While I'm looking into getting a Neptune 2, it's out of my budget atm but what you showed would be a godsend for me right now. better than my foam backdrop with a cloth draped over it :P Yas know... like this: kzbin.info/www/bejne/maTJlquVitiar9E blahhh... also stupid webcam focus. why does it look fine and crisp on-screen but the recording is yuck. @.x

[@Skott62]

Not so much a booth but a Photo Background. Good stuff though Uncle Jessy. Thanks for sharing it.

[@3DJapan]

Yeah, backdrop is what I was thinking.

[@victorclausson4039]

Consider choosing another color for the backdrop. Black, grey och white depending on your prints to give it some contrast. The pink backdrop doesn't go well with the prints.

[@georgeaura]

Awesome staro

[@nikvernon4251]

"you could buy your own photo booth but those things are like $50" he says holding a $90 RGB lamp. lol, I love the set up and have been thinking about building my own photobooth for like the last 3 weeks. just need to find a handheld light that can change colors closer to $20 bucks

[@Kal-el23]

You should do videos on your painting process

[@georgeaura]

How about a much larger version to hold the shape of a full size backdrop maybe that would be an idea for a test video

[@Phaix]

Have you tested/seen the Neptune 2D with dual Extruder? I would really like to know if it's usable and if its a mixing hotend. Just in case Elegoo wants more content, that would be interesting. 😉

[@bentebrunsvelt319]

Thanks you👍👍🇳🇱

[@rdgk1se3019]

I've asked this before but got no answer, what kind of drafting programs can be used with 3D printers?

[@freedom2663]

Is there something free and easy to use on the computer to edit pictures after you take them that is better than an app phone? Any recommendations guys?

[@freedom2663]

No Anycubic new DLP printer?

[@juanca3]

I wanna buy a small resin printer but im scared that I will just be able to make mini figures. I know resin printers are limited due to size but can you help, telling me what other things can be made?

[@benjaminford8173]

When Phrozen Mega 8K review?

[@3DJapan]

They sell those card stocks at the dollar store too.

[@Q8Police777]

You'll be better off buying extention tubes for your camera if you have interchangeable lenses

[@RH3D]

is there any reason you dont sell any resin prints on your etsy?

[@UncleJessy]

I do, they are just not listed at this time. Should have some up again by the end of the month.

[@RH3D]

@@UncleJessy ah ok - I was wondering if its because they remain slightly toxic to touch even after curing or something? (im new to this)

[@RH3D]

Also what is it youre spraying on the starfish?

[@freedom2663]

Too bad I don't have a 3d printer. This could be very useful for painting miniatures and actually then uploading them to the net.

[@GreatScottJ]

Get some green board and make the background whatever you want!

[@AtkinandSon]

Come on Jessie, where’s the Phrozen Sonic Mega review?

[@miguelgomesqueirozjunior7796]

👏😎

[@paullender]

You can just tape the paper to wall and sweep it across a table top

[@DEEZYTOLDYA]

Iknew it

[@FLG8r]

Fusion 360 ... easy

[@makewithmegma]

🔥💕😍👍

[@raykcy]

how stupid am I, I thought Uncle Jessy printed the whole background

[@mattkeegan1359]

lol tape it together man

[@troylee4171]

1st view