4 Barrel Carb VS 2 Barrel Intake ??? - Tested/Tuned

Old HotRodder Trick: I have wanted to do this for a long time - it surprised me!!!
Adapter I used to make this happen: amzn.to/2MkvNe0
FULL Satellite Series !!!! - • ABANDONED Muscle Car R...
Junkyard Digs KZbin channel - best revivals on youtube.
/ @junkyarddigs

[@missionpassed4584]

Just some good ole boys never meaning no harm, great video series.

[@roberttaylor5999]

I did the opposite on a 76 Cutlass. I didn't feel like messing with the PITA quadrajet so I bought a Mr. Gasket adapter and threw a Motorcraft 2bl on it and deleted the smog equipment. That old Cutlass never ran so good.

[@tonydespain6380]

What causing a rebuilt motor , carb , .. at first start to break in motor and set timing to have response with foot pedal used to keep idling but a few small revs , but after 45 seconds .. bo revving but still running g with smoke that burns the eyes

[@jeffgood6441]

@@tonydespain6380 sounds rich to me brother or u blew a head gasket

[@Billccm]

Gotta love an old Plymouth with a 318. That's Mopar at it's best.

[@Shane-Singleton]

In the style of Roadkill. Doing the wrong thing the right way! Love it! Runs great! This was a fun series to watch. I hope it turned into logs of views for you and Kevin.

[@maxfastest]

I am very impressed that you two managed to totally revive that engine ! Hats off to ya !

[@vicmabus1532]

This was a common low-buck hack back in the olden days.

[@letsdoittoit7554]

I cant wait to see another series like this again! I wish I had a 70 Satellite just like that.

[@TheKeymaster316]

Necessity is the mother of invention! 👍

[@enjoyingretirement4846]

You all may not know it but you are living the high life and making forever memories. So Cool!

[@chiplacey256]

I used to get JC Whitney catalogs in the 60s & 70s and they offered adapters to put 4v carbs on 2v manifolds.

[@grendelthewise1971]

I have to saw the same thing, but instead of the 60s and 70s. I enjoyed the 90s catalogs

[@backachershomestead]

If JC didnt have it you didnt need it.lol

[@grendelthewise1971]

@@backachershomestead You're right about that

[@maynardreed8374]

@@backachershomestead I've been busy the jc whitney warehouse in Illinois it's very big.

[@backachershomestead]

@@maynardreed8374 I used to live in Illinois.

[@Odawg3709]

Seen this already but I’ll give it a thumbs up for the love of the channel!

[@ryannakamura6906]

Yup, brings back memories. Back in the poor days. Seen 4brls on 2brl intakes all the time. Adapter at every napa.

[@tony66au]

You boys dun good bringing that old Plymouth back from the dead. You tidied up before and after too, rare breed sadly. Now grab some rust panels!

[@elmostong1865]

This was such an awesome series

[@darthbader6506]

Damn that car has presence, great job fellas

[@icerazar713]

One of you should drive that car for the Power Tour next year. Just send it! 👍

[@wildman510]

It's literally rusted in half, some how the body is decent though

[@siggyretburns7523]

Agreed 100%. ANY vacuum leaks will throw everything off and you'll never know why. Cloth vacuum hoses should have been outlawed years ago. The biggest contributor to carburetor mistuning. (Maltuning?... Bad carb tuning). Same thing with header leaks. Correct timing usually gets blamed for it. Lots of backfiring? Check header gaskets before adjusting carb or timing.

[@gregfoster4541]

Thanks for sharing, I enjoy watching both channels! Y'all seem to have a lot of fun doing it and very entertaining, have a Merry Christmas and a Happy New year too. "Howdy from Texas 😁"!!

[@plumbingstuffinoregon2471]

I'm still just baffled by this revival. This is definitely the most insane one on the internet!

[@mikeeru]

Not sure about most insane but it can definitely compete with Roadkill's Cuda resque.

[@ryannakamura6906]

Good candidate for rhino lining and stop sign floor repair.

[@dirtmgirt209]

I think thunderhead only has black and blue shirts.

[@johndowe7003]

i wear the same outfit too way better for me, so pretty much 20 pairs the same shirt xD

[@louroberts5567]

Sounds like me. Same colors. T-shirts, sweat shirts, Carpenter jeans. That's my wardrobe. Low maintenance.

[@FishFind3000]

Lou Roberts function over form

[@gettintheresafelywithpatf2869]

If formal and winter time, I grab a flannel shirt, should have seen me at a black tie event!!! USMC Dress Blues, It was the last time I got seriously dressed up... for a wedding, my wife is still my angel and always will be!

[@ImTheJoker4u]

Best ROADKILL episode yet!!

[@just-another-guy]

This is my fav rescue so far guys

[@mikiesmustangs4803]

Man i have always been a mustang guy but the old mopars ❤❤❤ i love um i want that car lol

[@siggyretburns7523]

I've always had a thing for brake pedals that have a twist in it. The cheapness of it is just so damn cool.

[@MsKatjie]

Like the song at the start. Will listen more closely to the lyrics 2nd time around. Place seems rural and the rest of the world matters little. As long as the gas, beer and electricity gets through! Fixing old V8 cars, with time and know how. Do the same my self. Cheers, to all watching as well.

[@study650]

Good series. Merry Christmas to you both.

[@tattooeddude72]

I literally just orderd this exact Adapter kit 20 minutes ago for my 318 build

[@RpmAuto]

It's ready to run moon shine

[@chuckhaynes6458]

Going back to Hot Rodding in the olden days carb adaptors were a pretty common item. Beginning with Model A Fords which had a 1 bbl. updraft carb. It was a common trick to flip the intake manifold over so you could use a downdraft carb. Not being happy with that, adaptors were made to place a 2 bbl. Stromberg 97 carb on it. That worked very well. By the late '50's every kind of adapter imaginable was on the market. including one to put a 4 bbl. onto a 2 bbl. manifold. If I had more time I could suggest how to adapt a large base Holley or Carter (Edelbrock to you) to an early small base manifold correctly. It can make a huge difference. Now it's time to get the correct Ball&Ball carb for the poor 318.

[@johnrolf4338]

Is the epoxy absolutely necessary? That makes it a irreversible permanent install on the intake. Doesn’t the carb gasket block off the extra holes in the adapter? Just wondering how a vacuum leak can occur with the gasket blocking everything off?

[@jeremiahsmith6689]

I have been tempted to try the same thing on my 67 mustang

[@russell11fitzgerald]

Two guys working on the car one tub of Vasoline

[@joshlara8237]

Wow thats crazy it runs that good with a 4bbl on a 2bbl intake good video

[@thomasringer954]

I did this on a slant 6 was a 2bar went with a old holly econimizer carb about 400cmf worked great

[@alguertler4981]

Deck the Dodge with a four barrel Holley fa la la la la...

[@davidwichner2018]

🤤🤣 thats a good one

[@RetiredTony]

Bad ass guys! Merry Christmas!

[@jurajokasa834]

8 cylinder salvaged diesel would be great junkyard project

[@makaylaslater5247]

I still cant believe you got that car to run after all those years let alone the 4bbl to work on the 2bbl intake. Lmao

[@bohemialite6371]

You're amazing Luke your mathematics you're awesome

[@AntonioClaudioMichael]

Great video guys awesome revival

[@claudiovargas9571]

You guys did a great job so what will b happen to the "Satelite"?

[@JohnArceane]

I believe that they sold the car off but don't quote me on that.

[@CopeLongcut94]

There is a project 1965 GTO sitting near the highway near where I live in Nebraska that is definitely needing a revival by you guys.

[@ThunderHead289]

Nebraska isn’t far from us, that’s for sure

[@tonyperezchica7407]

Nice job guys!

[@bryco32]

Probably too old of a video to get a reply but what are you considering "Sealant " when fitting the 4bbl adapter? Is RTV used as the sealant our are you mixing epoxy and using it? I have a Amc 304 I'd like to adapt a Edelbrock avs 650 to but I really don't want to spend $500+ on a 4bbl intake for it.

[@ThunderHead289]

Lucky you, here I am - check out that most recent video I made. I use a 2 to 4 barrel adapter of my own design that I'm releasing soon - is your 2 barrel comparable to a holley/autolite 2 barrel?

[@bryco32]

@@ThunderHead289 Hey Luke. Sorry I didn't get a notification of your reply! Yes My factory AMC 304 2bbl intake had Motorcraft / Autolite 2100 on it from the factory. Definitely interested in your adapter for this swap.

[@colerippeon3903]

Never messed with a summit carb but dig the design. Its shaped like a holley but you service it like an edlebrock / carter. I like removing top plates compared to bowls. Do they use a metering rod set up? And is it diaphram style accelerator pump or plunger style?

[@marcosmarcao8234]

Big hug from friend Marcos Polux Brasil 🇱🇷🤜🇱🇷

[@GiulianoAlmeida]

Man! this video will help me a lot! I have a Quadrijet Edelbrock 1405 to install on a 302v8 with original collector! I will follow your tips! I have a 1974 Ford Maverick V8 4 doors. Thx a lot! :)

[@Marcelo-rl3cd]

Vc instalou a quadrijet com adaptador? ficou bom? Vou insônia meu tbm

[@GiulianoAlmeida]

@@Marcelo-rl3cd opa! Vê lá no meu canal. Tem o vídeo passo a passo disso :) ficou animal! Abraço!

[@graybeardproductions2597]

Tuff looking car on top of it. You guys are good ehh

[@TheFrameoff]

Was this put up earlier ... I've seen this

[@ericmiller2052]

I recently bought a couple AMC 304s, and one of them has the 2 to 4bbl adapter. Haven't done anything with it, though

[@traviswarehime5796]

Awesome video as always!

[@tylerseyfert2015]

Dude my 75 has two dead cylinders a two barrel bbd and almost all of its original components and it idles great

[@tonystoakley5816]

Love you Guys always look foward to new vids and Dylon super cool when you 3 gonna do something together again ????

[@johndupuis6911]

same

[@brokehippiegarage7384]

Nice like y’all videos🕶🔨⛽️

[@dridiott]

and then you dig a hole! nice work gentlemen!

[@mattwiedenman3268]

Merry Christmas!

[@GoodBariusOfTheNorth]

Just did the opposite on a late model sbc 350 vortec put an old quadrajet on it and the well plugs went so got myself an adapter plate and a dualjet fucker runs like a top now.

[@spiv_gennedy]

I had the exact thing on my '66 Plymouth Fury. Same damn ass engine too. ( Yanked it out of a '73 cuda.)

[@thetwoidiots8659]

You guys are really funny

[@kman-mi7su]

Now drive that junker down to Dylan McCool to see what he can do to it!!

[@grendelthewise1971]

Not a junker, its a work of art

[@MemorableC]

@@grendelthewise1971 its a rotted out pile of trash with a good motor

[@grendelthewise1971]

Was this car actually saved or was it left at this property

[@ThunderHead289]

We took it with us indeed 👍

[@alan6832]

@@ThunderHead289 So is there any reason to put a 4 barrel on a 2 barrel manifold? Is it any faster? or is the flow still limited by the manifold? or the need for mixture to flow around the throttle plates partly obstructing the adapter?

[@backachershomestead]

Shes ready for the road.

[@stevenlopez102]

I LOVE U VIDEOS. QUESTION. IM RUNNING A 460 74V DATE CODE. IM CURIOUS TO WHY U LIKE HOLEY OR SUMMIT CARBS MORE THEN EDEL. I THINK I MIGHT SWITCH TO THE 750 SUMMIT. I JUST WOULD LIKE TP GET UR INPUT. FYI. ID REALLY LIKE TO SEE U DO SOME 460 BUILDS

[@Framlife351]

I did this to my 351m and didn't put epoxy on the bolts and the secondaries are not active. It sputters at high rpm. I will be adding epoxy tomorrow. Your thoughts?

[@akinoffury2332]

Now I gotta ask, what's going to happen to the Satellite now?

[@ThunderHead289]

There are plans for it

[@akinoffury2332]

@@ThunderHead289 Future video plans, I'm hoping.

[@the_sad-panda_gaming9938]

Question: do you think that I could do this to a 1600cc duel port VW engine? I was thinking of putting a 32\36 carb on my engine but the work and money to put in the right manifold is to much. Thinking of getting 1-2 barrel adapter for it.

[@aarvolaredonjunior1032]

Can you make a carb suggestion for something that would work for 1987 ford ranger 2.0 4 cyl manual so I can move it around ansison carb way to expensive.thanks for your help

[@sunzoo7173]

notice how the scene cuts after the dirt throwing? they got a new camera guy is all I'm saying

[@pisibish6111]

Put some bad ass wheels on that thing and road trip it!

[@runningraggedranch5086]

Thats one car ya guys should have rescuedan purchased

[@TechTimeWithEric]

I wish you guys would release this on DVD along with outtakes and bloopers and whatnot

[@rogjackson]

So what happened to the Satellite after you and JDigs were done with it? You can't leave us hanging like that!

[@ThunderHead289]

Ultimately dylan mccool is to pick it up for a project. We had more plans originally, but I just can’t get the time off work. Two weeks a year isn’t a whole lot

[@nicolasroque163]

U guys are insane Wat u do with the car in the bushesthat broke three starters

[@heathersanborn4914]

🤘 - oh yeah "Luke " 😘😍

[@nathanmccree3089]

Awsome video's

[@edcain3676]

Try A HOLLEY " Dirt Track" 2 Barr.500 cfms,If U Can't Get A 4 to Work.Did That ,Back in the Day,To My 71 JAVELIN AMX ,& Oversized the Jets W/ 600 cfms,Stk 2 Barr. Was 275 cfm,Went To 600 cfms.Ran Like A 4 Barr.& Didn' t Mess the Fuel Air Mixture Up,Being a 360 Engine.

[@trickyricky12147]

Nice!

[@n0rphe]

I felt in love into a car... AGAIN, i blame u guys.

[@oldcroneysgarage9739]

Do you still have the satellite?

[@lawnmowerdude]

That thing sounds better than a Ferrari.

[@Ddffgghhjj]

That whistle is triggering ocd I didn’t even know I had

[@esesoke]

Build another MOTORIZED bike happy New years

[@Docstantinople]

So what’s the future for this thing?

[@JetBomb-xx6ye]

I wonder if this is possible in a Tesla 😅

[@ryannakamura6906]

How did you do the burn out? Thought all the drums were mangled.

[@housestark45]

They tied it to the tree behind the car

[@ryannakamura6906]

@@housestark45 aaaahhhh. Didnt catch that.

[@housestark45]

@@ryannakamura6906 you can see it in last vlog of the series

[@sladeschopshop]

What kind of epoxy/sealant is best?

[@MyronBuss]

If that thing has an automatic in it, you better get the kickdown linkage on it or you'll be rebuilding the transmission.

[@ThunderHead289]

You must have skipped around in the video - it's a manual 3 speed

[@Maximusfoisey]

​@@ThunderHead289it's been 4 years not every one is going to know the whole story on it witch I don't know how because you just reposted the full story on KZbin channel a year ago. This thing is the best revival ever to hit KZbin because most of them is all put in a battery and gas and run . When this one actually was challenging and fun still one of the best videos to rewatch other than Kevin bluer videos. In the past 3 years you and Kevin have both been super busy you will carb cheater and Kevin with KZbin. It s always fun to see you guys hang out once in a while. I probably took too much of your time reading this all if you're even going to read it all. Me myself I'm 15 so I don't know what beaing super busy is😂.

[@alan6832]

Watching burnout videos is a lot greener than doing burnouts.

[@fredmaxwell9619]

Whatever happened to the 70 Satellite?

[@ThunderHead289]

It’s Kevin’s

[@fredmaxwell9619]

@@ThunderHead289 Thank You.

[@pjimmbojimmbo1990]

Well, it will run up to the Flow Capacity of the Intake, but it will never be able to Utilize all the Flow the carb can provide. I doubt the Secondaries ever open more than a Crack, if they open at all.

[@Rayman1961.]

Are both of you from Iowa??

[@ThunderHead289]

We are. We actually now have a little garage arrangement together

[@Rayman1961.]

@@ThunderHead289 I'm in Mason City

[@firstgenerationgarage2803]

Great video Thunderhead I have a question for you I have a 67 Firebird and A 69 Firebird my 67 Firebird has a 455 Pontiac engine in it and my 69 has a 350 Pontiac engine in it I have a Edelbrock 1406 on the 455 and a Holley on 350 it's not a double Pumper my question to you is my car's both of them starts doesn't matter how hot it is outside or cold I don't need to put the choke on some guys tell me I might have it running too rich but I set the adjustment screws 1 and 1/2 turns and about 650 RPMs on idle and I still don't have to put no choke to turn on the car is that okay thank you for everything I love your KZbin channel

[@Bigdaddy-Donkyking]

With electric fuel pump an knowledge of carbs you can bet old cars

[@60EFFIE]

When are y’all getting hitched?

[@ThunderHead289]

October 3rd, save the date

[@barryhopesgthope686]

Hey, how about a recovery with Aaron and Emily.

[@barryhopesgthope686]

Have you texted them?

[@barryhopesgthope686]

Whoa! I don't remember asking this question. Just the first suggest.

[@alcatrazrider]

🤘🤘🤘🤘🤘

[@thomasharvanek2411]

'Murica

[@dalejrfan820002000]

If you get the Right Spacer

[@ThunderHead289]

There isn’t one - the only spacer out there is a 4 to 2. You flip the adapter upside down to make this happen

[@johnathanprice8255]

Two dudes and a jar of Vaseline js

[@ThunderHead289]

Weird fantasies you have there, I suppose no one will judge you for that now.

[@charliesybert2683]

I love old farm trucks. I would rather pull in to the school parking lot with my 1948 Ford f1 with a Chevy 350 small block