How To Balance Front And Rear Scooter Wheels And Tires

Information about wheel balancing stands and techniques for typical 50cc and up scooter wheels, including rear drive wheels with splines, and additional tips to get a better result.
✅Tip Jar (Did this video help you?)✅
paypal.me/49cc...
Please like, favorite, share, and subscribe if you found this video to be useful. Thank you for watching.
#ScooterWheels #ScooterDIY #ScooterHelp

[@vz8619]

Clear and concise information. The video is an excellent example of how a How-To piece should be done. The Additional Tips section was a good idea, thank you.

[@DIOSpeedDemon]

That was a Brilliant Video. Cant wait to buy a balancer and balance my 10 inch wheels to go 90mph. Thank you so much. RH DSD

[@49ccscoot]

Thanks very much. Good luck with the 90MPH. I started watching your vids when I first got a scoot more than 10 years ago!

[@carlosipec2270]

Glad you mentioned "rotating the tire on the wheel". I've seen way too many times. The yellow mark balancing a tire on the opposite side of the valve! Yep, that wouldn't be a first. Even on, so called, reputed brands like Pirelli. Your example of 20 gr. to balance such a small tire. Would have me rotating the tire right away. To try and find a better spot. 🙂 Cheers

[@younessoubbad1651]

You're just amazing dude! You Always answer my questions precisely!!! I'm a fan !

[@The77pgl]

Great info, I had a significant "bounce" at 15-20 mph, I took the rim back and they gave me a new one, helped a lot, but I still like to balance them both, definitely a great video, in fact all yours are thanks!

[@49ccscoot]

Thank you!

[@ludditeneaderthal]

pretty much exactly how uncle sam balanced plane props for half a century! as always, superbly presented and informative in a nice "compact" vid.

[@psychouki]

Super helpful. Thanks for posting the video

[@greatquotestoliveby]

Excellent video! See people, this is how things are done properly and correctly. If you think you can just put some "balancing beads" in your tires and your wheels will be balanced you are going to find yourself falling for many scams in life. Again, excellent video.

[@larsalfredhenrikstahlin8012]

Thanks! I followeed this and now I have balanced my front wheel with new tyre on my 110cc.

[@richardworden9747]

I have a icebear scooter and my rims are custom painted So I did not want to put weights on the outside of my rims . So I looked in to counteract glass balancing beads for motorcycle. They worked out great for me and give me a very smooth ride at all speed's. Note I run 12" rims and high speed tires.

[@HasSse666]

Good video and good explained

[@49ccscoot]

Thank you.

[@larsalfredhenrikstahlin8012]

Dig har man lärt sig en hel del av genom åren också när man googlat olika problem som uppstått under moppemeck. All den kunskap som jag nu kan applicera på MC nu när man är förbi mopedåldern sen 10 år, så tack till dig med!! Bor i Stockholms innerstad och har inga kompisar eller föräldrar som är intresserade så har bara haft internet till att lära mig så är sjukt tacksam till er som tar er tid för att lära ut.

[@Barranquitas0424]

I have been watching your videos all night long, besides all the other ones I've watched ever since I bought my 50cc Peace Sport...I typed in "replace front wheel bearing" but haven't found anything...Do you have any experience with this that could hand me down some tips, please??? If you could make a video on the subject it'll be great!!! If you do have experience on it; could you please indicate what type of bearings would I need to get??? Thanks in advance

[@49ccscoot]

Here ya go : kzbin.info/www/bejne/Z4OwdYtqa6etq7c You would need to check the part numbers on your bearings to see what you need to get.

[@niteshademusic5262]

flawless victory! thx great info man!

[@Visionery1]

Nicely done and explained.

[@superstarjay3564]

Love your vids man always quality and informative 👍🏼🤙🏼

[@DIOSpeedDemon]

I had no idea. I am thinking of buying 2 new moped wheels for 250 because my stock wheels are about 25 years old. Where did u purchase the wheel weights from. If I Could ask. Thanks .Randy h dasf

[@49ccscoot]

One type of weights that I use are made by K&L. If you search "K&L wheel weights" plenty will come up. I think the others were generic from eBay or amazon. If your wheels look OK and it's just the 25 years old thing that worries you, you could check for runout (put a dial indicator on them while they're on the balance stand) and make sure the surfaces where the bead will contact are in good condition. Considering the speed goal though, if you have doubts it's hard to argue with replacing them. 90MPH or anywhere near it is fast on those little wheels.

[@chrispychickin]

"Drunk driving makes me AIR BORNE" - I lol'd

[@hfd484]

Here's a mod you might be interested in, no keys needed to start the moped and it's also a alarm. The thing cost like $70(on Amazon) so i'll just stick to the cheaper alarms. Video name - Scooter Alarm Installation with Remote Start Channel name - Jeremy Vinup

[@iBluemoon91]

I have a Taotao 2012. My weight is 112lb. I ride my scooter alone and I will be riding it in a average temperature of 65, how much psi do you recommend for the front and rear tires? There are multiple opinions and honestly I’m so confused! Thank you!

[@49ccscoot]

I'd probably try 32psi front and rear. You may be able to go less, being so light, but low air pressure will slow these small scoots down. If the steering feels too fast for you like that, you could try dropping a couple psi from the front.

[@jerrymiller5101]

Professionally done video-excellent

[@49ccscoot]

Thanks!

[@robertpierce1981]

I’ve got new sneakers coming in the mail. Now I need a rod, some cones and some bearings.

[@nenadjovicic1852]

Thanks man i solved problem like you explained..thanks

[@guitartec]

What was the cut length of the 3/8 rod? I'm buying this balancer and 10mm rod, but I don't know what length to buy.

[@49ccscoot]

I cut mine to 15". The original is 15.5".

[@dbfcrell8300]

Thanks! I appreciate your answer and video.

[@Lacider]

Good info, you think most wheels are out of balance on most Chinese scoots? (from the factory) if/when I get mine, I may just use the packing frame to make a tire balancer. :P

[@49ccscoot]

I do think most are out of balance. Many say it doesn't matter unless you can get to 50MPH+, but I've definitely had wheels/tires that annoy me at slower speeds.

[@larsalfredhenrikstahlin8012]

great guide! thank you.

[@christothegreat1]

On the taotao atm50, which if I remember right is the brand you have here, is there supposed to be a set of spacers on the rear wheel? A short one and a tall one? Getting a metal rubbing squeaking noise while riding in time with speed..

[@49ccscoot]

Mine is just the wheel and a nut. Spacers are usually for dual shock setups, which the ATM50 should not be.

[@christothegreat1]

+90GTVert Good point, how about adding a second shock to the rear, plus foot pegs, for the purpose of not bottoming out while your gf is riding with you on the seat behind you. Would this be smart from a mechanical engineering perspective to carry around 300-400 pounds vs the 250 or so stated in the owners manual?

[@kennypool]

Great video

[@kennypool]

If anyone knows how to release the parking brake on a honda reflex, ?

[@shunjingus]

My scooter on the center stand when wheel is revved to 50-60kph the bike vibrates left and right quite seriously. When riding, this causes the steering to shake left and right at said speed. Is it a balancing issue?

[@49ccscoot]

Could be. Could be that something is bent or otherwise damaged/out of spec. I would do a thorough inspection of the whole scooter's suspension and wheels and tires because it is dangerous if the steering is moving.

[@Chopperhog]

Great vid thanks

[@magicdevil1996]

I have a pit bike and when i tighten up the wheel nuts they become stiff and wont spin, do you know what the problem might be.

[@49ccscoot]

+magicdevil1996 Check the spacing. Make sure you're putting things back how they were. Maybe a spacer is touching more than just one section of the wheel bearing and trying to lock them together.

[@VHF808]

Does unbalanced an wheel affects the handling? Thanks for this useful info vid... :)

[@49ccscoot]

Not totally sure. I've never had an issue on a scooter at least.

[@driftadjiev]

very

[@carlosipec2270]

Depending on the severity of the case it pretty much can make it "unridable". My worst case scenario. Was a very unbalanced Kawasaki KLR 250 (21" front, 18" back). Bought in almost scrap condition. Where the tire fixing clamp was badly assembled. Adding to old tires. Lightly smashed rims. And no sort of balancing for any of the wheels. Long story short. The 350km ride home. Was done at a top speed of around 80km/h! Anything above the bike literally jumped and shacked of my hands... ;-)

[@drewbush6535]

can i balance a 11" wheel thats on a scooter? 48mph starts shaking

[@49ccscoot]

Sure. You can balance 10s or 12s, so 11s should be fine.

[@Ammani-Yat]

very good idea 💡

[@swolneck8615]

How do you change a cvt belt and what's a good brand?

[@49ccscoot]

This will cover the belt change and then some : Scooter CVT Transmission : Full Service Inspection I like Bando belts.

[@joeytaber6379]

where did you get the digital instrument cluster I've seen in other videos

[@49ccscoot]

49ccscoot.proboards.com/thread/8614/trail-tech-vapor-information-installation

[@Xombigod]

My handlebars wobble. Do you think this is a tyre balance issue?

[@49ccscoot]

I would check the fasteners and bearings in the handlebars and steering stem first. Balance issues are more likely to give you a vibration that changes with speed.

[@Xombigod]

The wobble is only when I loosen my grip on the handlebars at speed 30mph-40mph. So do you reckon it's still bearings?

[@49ccscoot]

I would still check the bearings. I would also make sure the tire is properly inflated. If this just started "out of the blue" then make sure the wheel hasn't been bent as could happen hitting a pothole or something like that. Won't hurt to check the balance and it could be related to that if it's way out.

[@Xombigod]

It seem to have occurred since having a new tyre fitted last week, tyre pressure is fine! Thanks for the advice so far.

[@49ccscoot]

Ah, well when you have a specific time/event that it started it's good to list it. In that case it's more likely to be related to the tire directly. See if the tire is mounted in the proper direction if it's got arrows on it to indicate direction. Also check that the light spot (usually marked with a dot) is aligned with the valve stem.

[@wakaoeh]

what if i get new tyres installed but no wheel balancing was done?

[@49ccscoot]

That's common on scooters. Many people don't think it's necessary on low speed stuff. It may not be. If you notice any issues, then you may want to balance the wheels and tires.

[@TattooedDad87]

Is the most common heavy spot on a scooter tire is where the valve stem?

[@49ccscoot]

That's the most common heavy spot on the wheel, but doesn't mean that's always it.

[@crpth1]

Tip: Given the chance check the balance of the wheel alone. Without tyre. If it's a tubeless make sure the valve and other details (like magnets, etc.) are in place. Similar with tube, set it and check. That will give you a good head start, on this balancing game. ;-)

[@robertfreund7525]

Thank you

[@TurboTyler]

Subscribed

[@49ccscoot]

Thanks!

[@nonyadamnbusiness9887]

Nice presentation. I think the presenter must have studied ZeFrank.

[@motley679]

Never knew this was a thing with scooter wheels. Is it serious ordeal or?

[@49ccscoot]

You don't have to do it, but if you have problems with vibrations it may help. It's not tough to do if you have a balancing stand, just takes a little time.

[@TheJcrandazzo]

Balance beads or ride on..

[@49ccscoot]

I've used both of those as well. I prefer Ride-On of those options, because it can help to avoid a flat. I've used Ride on with static balanced wheels as well.

[@neotheseattledj]

Those stiff ass bearings look like the same size bearing that fit in a skateboard wheels. I bet you could use some super smooth skateboard wheel bearings. Buy a 4 pack at any skate shop for like 20 bucks

[@justingalligan7508]

wd40 is not a oil it is a cleaner for parts and takes off rust

[@49ccscoot]

Regardless, it works quite well for this purpose and it's something that many people have sitting around.

[@rmb7247]

how do you get the damn tire off? lol

[@49ccscoot]

Just the tire, like a tire change... or the whole wheel and tire?

[@steveh7085]

wd40 isnt a lube, its more like kerosene

[@49ccscoot]

Regardless, it's been good for this application for me. It's something I have handy most of the time and a quick spray gets the bearings moving and protects a bit when stored.

[@gertvanpeet3120]

Wd40 is not a lubricant! 99% evaporates.... And balancing under 80 kmh is nonsense. The 50 tons trucks on the road... All non balanced!

[@OlonHenderson-ky7sb]

Po

[@bp-tuningaeroxlc-dd6474]

Can you give me a Link direct to the tool you youse i the video….

[@49ccscoot]

This looks just like it : amzn.to/43dnGFF (affiliate link)

[@The77pgl]

Great info, I had a significant "bounce" at 15-20 mph, I took the rim back and they gave me a new one, helped a lot, but I still like to balance them both, definitely a great video, in fact all yours are thanks!

[@49ccscoot]

Thank you.