4th Order SubWoofer Box | Home Made SubWoofer - 40Hz Frequency | DIY Community

[@eduardohenriquelima]

The resonant frequency (Fs) of the subwoofer is probably 40Hz and the maximum response efficiency of the speaker is at 50Hz. The response of the Box/Subwoofer set was very restricted and limited in the bandpass. I believe it is due to the limitation of the subwoofer that is not suitable for this type of box.

[@NorthFloridaAirGunner]

Why would anybody want a 40hz tune on a home sub? Mine is 28hz and even that is a high tune for ho.e use. A home sub should be 18-20hz tuned. Regular full range home towers are tuned around 40. Not the sub. Stop giving audio advise.

[@ColmanDeejay]

hello, very good video, the sound is great. i wanted to ask you if you had tested the woofer outdoors and if the bass was still audible. greetings from argentina.

[@DIYCommunity]

Hi, Thanks. I tested this in a 3000sqft auditorium and it sounds good. I did not get a chance to test it outdoors. Will update you once I test this.

[@tractorlover446]

Telugu

[@jdkarora6729]

@@DIYCommunity Thanks for this full detailed video sir can you please share the box dimension for 12 inch subwoofer

[@nezuko-cihan]

Hello! I want a cabinet that can be used everywhere like JBL PartyBox. Which cabinet do you recommend for 1 x 8-inch subwoofer? I want a deep and vibrating bass. What is the type of cabinet that vibrates in every area? Do you recommend an L port cabinet or a bandpass cabinet? I'm building a portable system and I need your advice. Thank you :D

[@royalabhi_0001]

Sir ek sawal ha ke jo apne ply wood lia ha uspe apne dimention likha ha ha na to apne jo 14''×20'' -2 likha ha usme -2 ka kya matlab ha or apne sare dimentions ko inches me lia ha na cm to nahi lia and 14''×20'' apne L×B KE HISAB SE LIA HA NA

[@DIYCommunity]

Dimensions are in inches. And 2 is no of pieces.

[@royalabhi_0001]

@@DIYCommunity thanks sir you are a very careful youtuber who cares about there subscriber because i seen your comment box and seen that you always reply when someone ask any question this love for subscriber will make you succesful☺☺

[@DIYCommunity]

Thank you ❤️

[@siranjeevisiva500]

Hi you made 10 " box .it's ok . But I want make 12 inch box . But I don't have measurements 😞 please tell me

[@DIYCommunity]

Hi, you can make a box of 15x18x22 inch. And use 3 ports of size 2.5 inch and port length is 10 inch.

[@siranjeevisiva500]

@@DIYCommunity thank you for answering me 🥰🥰🥰🥰

[@BonniGyanesh]

Great Deep Bass Sir very nice quality rich Bass effect coming from Port sir want to ask you please tell me i want to make this enclosure for 10inch subwoofer in that case how many ports I need 2 or 3 and please tell the pipes you given for bass pass in length and inside width how much please tell sir in 10 inch Subwoofer Enclosure what is the length and inside width can I take for good results thanks iam waiting for your reply only tell me the size of pipe and width of pipe

[@DIYCommunity]

Hi, All details are shown initially in the video. Do check out.

[@claudiomirofacanha7194]

Eu achei muito legal esse projeto diferente da minha caixa subwofer e normal ou seja e simples. Agora eu te pergunto do jeito que você fez embutido o fone fica melhor?

[@jaireduardocamargobuelvas1526]

Buen proyecto amigo 👍🏼

[@leonel8328]

Vaya,por fin un video que muestra lo que buscaba desde hace tiempo gracias este tipo de cajon lo he querido ver por que habia visto 1 home thater activo y el subwofer era pequeño pero con el modo en que estaba armado el cajo asi como el que hizo es genial ,tratare de hacer uno para mi auto haber como me queda,

[@SUNILKUMARRISTAL]

Made 12 inch subwoofer box

[@ร.ต.อ.สง่าจันทมาส]

thank you very much from thailand

[@paulopuchi2736]

Nossa mano um alto-falante tão bonito desse colocar uma tampa horrível dessa colocação acrílico

[@extremegaming6365]

I have made this enclosure after watching your video. It sounds really awesome thanks for sharing your skills

[@sandeeprx100]

Nice👍... How can i order ur subwoofer box,, not mensioned ptice and conduct details.

[@DIYCommunity]

Hi, I don't sell these items. You can ask any carpenter by sharing this design. If you still need a readymade one let me know.

[@snhongo1]

Whats the name of that tool you put on the drill to cut circles

[@DIYCommunity]

It's called as Adjustable circle drill bit.

[@snhongo1]

@@DIYCommunity thank you

[@ร.ต.อ.สง่าจันทมาส]

...thank you... form thailand 20 october 2022

[@royalabhi_0001]

Sir can i use 8inch subwoofer because i dont find 100w subwoofer with 10inch size so please tell

[@DIYCommunity]

Yes you can use. Reduce the size by 1 inch overall. It will not be perfect but not sounds bad also.

[@royalabhi_0001]

@@DIYCommunity oh ok sir thanks A special gift for you You got a new subscriber❤👍👍

[@royalabhi_0001]

@@DIYCommunity sir i want to ask that in how much money you make this subwoofer box

[@DIYCommunity]

Hi, I had few unused ply at my home and I made use of it to make this subwoofer box. If you but these plywood and make a box it may cost Rs. 2500/- approx.

[@royalabhi_0001]

@@DIYCommunity oh its in my budget in just rs 8499 i will make a home theater with big bass

[@tonixthegreat5371]

hi there im a new subscriber..i would like to ask if you have a box plan for d8? since this vdeo is for d10.. thank you..

[@DIYCommunity]

Sure I will plan for an 8inch

[@kasunsanjaya8756]

Please give me a 15mm wood thickness sub box parameters ...... same like your 4th order subwoofer box

[@DIYCommunity]

If it is for a 10inch woofer you can use same dimension

[@aerobks]

Hello Sir , Could you please share me your experience which is better on this PORTED vs 4TH ORDER SUBWOOFER BOX fore the clarity , deepbass etc. Please

[@DIYCommunity]

Hi, The experience which i share may not be same for you. It depends on various factors like the room size, woofer size, woofer quality, box dimensions, woofer placement, amplifier wattage and low frequency you get from your amplifier. When comparing on various type of subwoofer box. 4th order and 6th order gives you deeper base only when all the dimensions and all required parameters are met. Ported boxes are much easier to making and it gives a decent output. If you are planning for a 4th order derive all the parameters first and then start building. So you don't get hidden surprises once build. Hope i have answered you. Let me know if you have anymore questions. Happy to share what I know.

[@aerobks]

@@DIYCommunity Thank you soo much for your great reply sir.. Thanks ❤🌹 Just one clarification, Which material is good for 4th order. PLYWOOD vs MDF

[@DIYCommunity]

You are welcome. For Any subwoofer a high dense wood will have more stability. If you are planning to make some curved edges then go for MDF. Else plywood. Both of 19mm thickness.

[@aerobks]

@@DIYCommunity Thank u again sir.. 🙏

[@jordanmwenda8029]

@@DIYCommunity Thanks for sharing bro... this is very useful to some of us we really appreciate your work💪

[@mr_Solorider_46]

Bro you make one mistake mesh on pipe 🐁 cut the wofer

[@keitakahiro2409]

How to calculate that box, sir? Vas volume? Is that from outside or inside volume? Please tell me..sir

[@DIYCommunity]

Hi, You can use subbox pro app to design your box. It has readymade designs for branded subwoofers. Also it has option to enter T/S parameters and design any subwoofer. I have designed a sealed and a ported box then combined them together for optimum results. Most softwares calculate the inside volume of the box.

[@keitakahiro2409]

@@DIYCommunity ok i will download that app. And how about your tutorial, sir. Is there any video? Thank you for reply my comment

[@DIYCommunity]

It's an online app. So no download required. I am planning to make a tutorial soon but no related video in channel yet.

[@keitakahiro2409]

@@DIYCommunity ok, i will wait it, sir. If you not busy, please make it 4th order bandpass enclosure. Because to difficult for me to measure it. I will subscribe your channel.. Greets from indonesia, sir.

[@Waton_Mangap]

@@keitakahiro2409 = Mengko tak ajari Lik.... 😀😀😀😀

[@kmsaudiolab2026]

Super

[@DIYCommunity]

Thank you Brother 💕

[@AshishKumar-sl2rd]

What is the suboofer price sir

[@DIYCommunity]

I brought this for rs.2300/- on March 2022.

[@Sumit-gc3dy]

Kon saa subwoofer hm log isme lagaye

[@pradipkadamgraphics]

Eskeliye bord konsa use kre batado

[@DIYCommunity]

19mm plywood.

[@aperta_o_pray6076]

Top 🤙🏻🤙🏻

[@debasishroy2017]

Please upload link for Subwoofer purchase.

[@DIYCommunity]

Sorry, This is a diy demonstration and not for sale

[@thepnimit...7043]

Thank you sir 😊☺️😊 Thank you for your share the Plan.

[@itsmetorque]

Damn 2when 40hz hits 🙄😎👻

[@DIYCommunity]

Theater effect while watching movies

[@sbsp6510]

excellent service 👏

[@mandarin136]

Finally 😍😍😍

[@a.thamaraimanalan2526]

Specs for 12inch subwoofer.

[@DIYCommunity]

Hi, what I have used is a bullstone 10inch double magnet dual coil 250watt subwoofer. Bullstone also has similar with 12inch.

[@salvadorlovite4869]

nice sir ,😊new subcriber here,

[@s.skamble4216]

super vibration

[@editz_2M]

Bhai kon sa subwoofer lagaye isme hm log aur kitne inch kaa

[@DIYCommunity]

It's a 10inch dual magnet dual coil subwoofer. Bullstone brand

[@vedanshmgayboywantlove9992]

I want ap banake dete ho ?

[@aryostosantossantos1215]

MOINTA CAIXA LABIRINTO DUTO REGUA TER DOBRO GRAVES CHEGA VERDADE 20 HZ WOOFER PODES USAR FALCON 12 POLEGADAS

[@jagdishthalore1122]

Sir box konse software se design kiya h

[@DIYCommunity]

Hi, i designed this using subbox pro. Designed a sealed and a ported enclosure then combined them for optimum results. I used a combined design as my subwoofer brand was not directly listed there.

[@jagdishthalore1122]

@@DIYCommunity sir posibal ho ske to ek enclosure design ka video bhi bna dijiye with full details Thanks 😊

[@DIYCommunity]

Yes sure i will do that

[@supampaul3606]

Dada JBL i300 subwoofer 12inch 300RMS 4th bandpass measurement pls pls pls

[@DIYCommunity]

JBL subwoofer comes with a dta sheet where you get all measurements suitable for their subwoofer. You also see ported and 4th order designs on that sheet. Refer JBL website if you don't have a data sheet.

[@sikhedgamerkamar5946]

Nice work 👍 but it's still a seal box

[@DIYCommunity]

It's a 4th order band pass. You can see the ports at one side of the box. Sealed at one half and ported at other half.

[@sikhedgamerkamar5946]

👍

[@Camocountry1]

Your using the wrong wood that's just gonna echo.

[@saranraj384]

ப்ரோ உங்க கடை எங்க இருக்கு பாக்ஸ் ஒன்னு வேணும் ப்ரோ

[@DIYCommunity]

Sorry bro I am not a seller. If you want to buy same kind of box you can contact KMS audios.

[@nanhsi1]

Diamention plz

[@DIYCommunity]

Dimensions shown in video

[@9704429]

can you share the link to order the speaker?

[@DIYCommunity]

Hi, I brought this from a physical store after testing it. I don't have a online link currently to share with.

[@แจ็คสิบทิศ]

❤

[@Valcano24]

Excellent 👍👍👍

[@kimanifrancis9718]

Make 12 inch box

[@rajasekar.s7904]

Sir 12" box 20 to 30 Htz response box making video upload plz

[@DIYCommunity]

Hi, That is very hard to achieve still I will try in my next project.

[@leonels101]

After installing everything, do you have to tune the speakers or it's good to go right away.

[@DIYCommunity]

If you are using a branded woofer then follow the tuning methods they provide. If it's a normal one without any specs then we are good to go. Based on woofer and box quality the frequency may slightly vary.

[@leonels101]

@@DIYCommunity Hey thanks, but here's a follow up question, can i add another diy simple air ported active subwoofer box (8" at 200watts) to my existing active sub which is a 4th order bandpass designed box (8" at 200watts)? Is there a possibilty of phase cancellation since they both have different box design? or it's just okay to go with it as long as they'll be tuned up with the same freq. and volume.

[@DIYCommunity]

@jomanski101 Hi, try with the 4th order one with a good amplifier. It should satisfy. If you plan to add one more yes there are chances of phase cancellation. You can avoid this by placing both woofers apart and move around your room to find the best place to avoid phase cancellation.

[@leonels101]

@@DIYCommunity Good idea, Thanks.

[@eduardogenao3315]

Me interesa hacer el cajon md. Puede facilitar las medidas de la madera

[@kimanifrancis9718]

How about 12 inch speaker

[@benjamarchena]

muy bueno,,

[@mr.darksoul805]

Hi 12 inch JBL subwoofer 4 th order box measurement tell me

[@DIYCommunity]

Hi, JBL subwoofer somes with a sheet where they have mentioned exact measurements. That will be the best match. You can also refer those measurements on JBL website

[@malleshsiripuram5040]

Cantact member

[@joshykx3561]

12"box price

[@DIYCommunity]

Hi, I don't sell box. In this video I have given all measurements you can ask any carpenter to do as per this.

[@umeshms7538]

Empty box sigboda.... 10" ge

[@MithuKumar-io9uw]

Bhai aapane yah box bekar banaya hai na yah band pass banaa only shield banaa

[@Dineshkulla420]

Super❤️❤️❤️❤️❤️❤️❤️

[@saranraj384]

Order box

[@domskiphotography2699]

do you have a design for a 4inch subwoofer speaker thank you

[@DIYCommunity]

Hi, I am making a 4inch dual subwoofer box. Will upload the video soon.

[@rexgonzaga2848]

what is the size of the sub?

[@DIYCommunity]

It's 10 inch

[@user-qg6lp6sx3t]

❤❤❤🙏🙏

[@kaliyappankaliyappan6602]

Hi..excellent video... Please how to fix 40 hz in subwoofer audio

[@DIYCommunity]

Hi, The frequently tuning is purely on the design of box and port size. If you already have a box then try using a sub pre with frequency adjustment. Set the frequency which matches your box and matches your expectations.

[@kaliyappankaliyappan6602]

@@DIYCommunity ok bro Thank you very much for your reply

[@royalabhi_0001]

Sir again i am here with a new question The question is that can i use a slim ply wood like 16 or 15mm Because my subwoofer is 100w only so please tell

[@DIYCommunity]

Welcome back 🙂 yes you can use. The purpose of using thicker plywood is to avoid vibrations. If you face any vibration issues attach a plywood piece of 2 inches to the cross walls (supporting opposite side) and this will minimise vibrations.

[@royalabhi_0001]

@@DIYCommunity ok

[@supampaul3606]

Plzzz

[@djalansantos9107]

Amigo faça a mesma caixa mais agora pra falante de 12 polegadas blz

[@DIYCommunity]

Okay I will try making one and upload the video. Thanks

[@Sakthikavin786]

12 inch measurement pls

[@DIYCommunity]

Will upload soon

[@ianrielcalansingin7934]

Sir.. is this good for car subwoofer set up? 4th order

[@DIYCommunity]

For car it is preferred to go for ported box. As size of 4th order box is large.

[@angellightandsoundblog5697]

Same design la 12 inch 300 watts speaker poodalama

[@DIYCommunity]

Hi the box and port size should be increased for a 12inch subwoofer. Let me know what subwoofer you want to use, I can try helping you on box design.

[@angellightandsoundblog5697]

@@DIYCommunity 12 inch 300 watt subwoofer

[@aanganggara884]

Apakah pakai crossover?

[@360love]

8 ing box how much sir

[@anthonymilton5547]

What's the measurements for "12in woofer

[@DIYCommunity]

Hi, All measurements are shown in beginning of this video.

[@MithuKumar-io9uw]

Yah magnet ki taraf se shild box hai aur use side se agar isko air nahin milega to yah perform nahin Karega

[@DIYCommunity]

Hi, there are variety of designs available to make subwoofer. This is one of model I used and the performance is very good. Try once and let me know. I designed this using a subwoofer software.

[@dontgiveup8048]

👎👎👎👎

[@yuvrajpatel8292]

Bro blue stone vs Dainty, kiska low bass achha h. Jaisa Maine info lia h to iska smooth h and dainty ka hard h ab ye hard and smooth me smjh ni aa rha bina sample k

[@DIYCommunity]

Both subwoofers are good at low bass. Hard bass and soft bass can be achieved based on what subpre you use. Select a good subpre with frequency control to achieve the sound you are looking for. Also the box design is very important for hard or soft bass.

[@yuvrajpatel8292]

@@DIYCommunity thanks for responding bro. Suppose I am using a subpre which I have set to 40Hz, now my only question is that will I feel the bass or it can only be heard?

[@yuvrajpatel8292]

Sorry for my silly questions, but such things can't be found with experimenting or without having abundant knowledge

[@DIYCommunity]

With a branded sub with all TS parameters available, we can build an exact box in which we get same response as they mentioned. But with non branded we modify the box size and sub placement to achieve this. The frequency measure can be done using mobile app and thro microphone. Recorded reading may not be precise but we can tune to a nearby value. As i suggested sub pre with frequency control can be used in which the sound quality can be adjusted as per users requirements and also for various sound tracks.

[@yuvrajpatel8292]

Thanks you very much :) i really appreciate it

[@user-ry9wi3yd5d]

Magkano po mag order

[@libin6127]

Bro Nice DIY Did you design box in net or your own design

[@DIYCommunity]

Hi, I refered internet for some information and designed this box. Couldn't get a direct design online for this subwoofer. Mixed a sealed and a ported box design to make this.

[@enricogirao1656]

bro can you share the measurement of your box

[@DIYCommunity]

Hi Brother, I have shown all measurements in beginning of this video. Pls do check.

[@supampaul3606]

Help 😭 big bro

[@amitdas2138]

Dada iska rate kitna hai

[@baluaddala1305]

How much cost

[@thugdogeofficial1662]

Bro 8 inch kaa measurements bataoo naa please 🥺muje kahi nahi mil raha hai band pass kaa

[@DIYCommunity]

Hi, you can reduce all sides by 1.5inch from the one I showed in video. Use 2inch port instead of 2.5inch.

[@kasunsanjaya8756]

15mm thickness wood measurements for 8 inches sub box please ......

[@matrixrj142]

Bom dia Teria como passar as medidas para corte

[@DIYCommunity]

Hi, I have shown all the measurements in beginning of the video. If you still need it I can get that for you.

[@cristianhenrique4061]

Opa boa tarde teria como passar as medidas da caixa

[@DIYCommunity]

Measurements are shown in beginning of the video. Pls watch. If you still need I will share again.

[@divyachittineni7902]

Cost

[@DIYCommunity]

Subwoofer cost based on what brand you buy and box cost will be between 2000 to 3000 rs based on material you choose.

[@boostedaudios4879]

Very good bass as i like😁

[@Odengaja-ej6he]

Berapa Haga

[@onewheelup]

when you hit 40 haha it shook my walls and i barely had it turned up.ive been trying to do the math on a couple bandpass boxes,and yea haha its confusing.use ebp calculator to see if your sub will work,easy,then design sealed part easy but getting ported section and port right can be tricky,but you make the box do what you want it to do,people get it twisted around thinking the other way,and the most screwed up part is,wood and stuff is so expensive now thanks to joe biden omg,so there goes my last hobby.i guess start stocking up on stuff,eggs are 5.73 almost 6 dollars man thats jacked up hope you liberals are happy.cool video man

[@puneeth2253]

Box measurement please

[@DIYCommunity]

Hi, I have shown measurements in this video. Check the initial clips

[@manogarjagan6545]

12" box price

[@arungokul20]

Speaker inch please

[@DIYCommunity]

What i have used is a 8inch subwoofer

[@smartmuthu123]

12"box price

[@supampaul3606]

Bro help mee

[@DIYCommunity]

Hi, how may I help you. Let me know your doubts

[@supampaul3606]

@@DIYCommunity I am completely mad I can't think of anything to do

[@nelsonkarolinnelsonkarolin5123]

Which inch speaker

[@DIYCommunity]

This is a 10 inch woofer

[@maheshkumavat8346]

Sir box ki size

[@DIYCommunity]

I have shown all measurements in beginning of the video.

[@benasirparvin184]

Price?

[@DIYCommunity]

I m not selling these. This is a demonstration video on how to make l.

[@robinvincernt3815]

Price

[@DIYCommunity]

Hi, I don't sell them. If you are looking for one I can help you with a contact you does similar box and ship to you address.

[@MithuKumar-io9uw]

Isase achcha to aapka band pass bachta

[@karanmalhotra2603]

How to contact you?

[@DIYCommunity]

You can connect with me over telegram "DIY Community"