4WD Paint Protection | Updated Rhinohide ABS Panels for your Four Wheel Drive

[@TheJetcon]

Love your videos, very informative plus your presentation is great .👍🇦🇺😎

[@JafffaAdventures]

Thank you mate, I appreciate the kind words. I’m glad you found some value here, enjoy your stay. Cheers👍😎

[@LimestoneCoastCustoms]

While I'm definitely not in the market for a set of these, you have made some very valid points Terry (myself being an ex-business owner, I'm hearing you & one of the reasons I really miss the challenge of running my own show) If the company are at all any good, they will take the constructive criticism on board for sure! Oh! yes, I did pick the headlights early on & I was thinking I must have missed something 😂We need more honest videos like yours, no BS... just factual, your personal opinion & how "you" did the fitment😎 (I bet that swim after was good!!👍)

[@JafffaAdventures]

Ohh man Rod, was that swim amazing! Thanks for your support as always mate, I sincerely appreciate it. Stay tuned, that headlight video comes out in 2 weeks time😉😎

[@OutbackOutlaw]

I have the Rhino Hide with the locking key system I put them on about 6 months ago and haven’t removed them. They are awesome and have saved the vehicle many times.

[@JafffaAdventures]

Good stuff mate, I share your sentiment. Go well👍😎

[@Greg-oq5vc]

Informative video. I have just purchased a set for my white 200 series. Your tips will help with the fitting. Yes, it might look odd, but all I am concerned about is protecting my paint and panels on this year’s remote WA tracks trip.

[@JafffaAdventures]

They definitely are fit for purpose mate, you won’t be getting pinstripes👍😎

[@v8s01]

I’ve missed this type of content. Looking forward to the 40 build to continue

[@JafffaAdventures]

Lots more to come including some FJ45 stuff👍😎

[@mrdoodle8748]

I have had it on for 2 years on the 200, car is not used as a daily driver. I have had no issues with it except those blasted Rhinohide logos wanting to peel off. I have had to replace the double sided tape on them. Car is white with carbon fibre wrap on the hood which helps a little by masking the colour clash of the black panels on the white car. I like the peace of mind these panels give irrespective of the look. Yes the fuel panel was a bit of a curve ball & should have been flagged like the snorkel heads up.

[@JafffaAdventures]

Cheers mate, thanks for sharing your experience 👍😎

[@peterguertler2752]

Well said Terry

[@JafffaAdventures]

Thanks Peter, I appreciate the support mate👍😎

[@fishernick2447]

Well said they can’t argue with that Terry 👍

[@JafffaAdventures]

Cheers mate😎👍

[@adrianmonk7663]

Hi Terry, I have been running the Bush Barriers on the Y62 for a few 10 day Victoria High Country trips ("Big fridge magnets" is a good description). I've been happy with them, not lost any on the 110km/ hour highway trips from Sydney. Good protection from sticks flying up and hitting the panels.

[@JafffaAdventures]

Good stuff Adrian. Thank you for sharing your experience, I do appreciate it 👍😎

[@denisgately4701]

I reckon the “new” Rhino Hides are just a Bush Barrier copy…. And yes, I have been using BBs for some time now.

[@bigfishfishing-111]

Awesome video, Terry. Thanks for posting

[@JafffaAdventures]

No worries mate, I’m glad you found some value here. Go well👍😎

[@craigjensen4179]

Great video Terry. Very informative

[@JafffaAdventures]

Thanks Craig, that is very kind of you to say 👍😎

[@davewilson7313]

Thanks Terry for Your very honest video , keep up the good work , Cheers Dave ....

[@JafffaAdventures]

You are very kind Dave, thanks for your support mate👍😎

[@tonyf7997]

Great vid Terry and once again, a very educational approach to the upgrade and your detailed and learned process to prep and complete this project. 10/10 mate! As for the questionable dealing and promotional activity of RhinoHide it makes a consumer sit up and listen to your very valid comment and believe me, all taken on board that will resonate heavily before I spend $ with them. Thank you! Also love the new rubber boots - you collected and had fitted! ✅

[@JafffaAdventures]

Thanks for the kind words Tony, I sincerely appreciate it👍😎

[@MB-ld6wq]

5 X kits were allocated at 50% off and further codes were released through the day with other discounts, again in limited volume. It was not a scam, it was a genuine discount and unfortunately, Terry missed out.

[@tonyf7997]

@@MB-ld6wq - 5 kits ???? Why bother. You may get better traction if you do a decent sale either for a weekend or a limited time , not based upon a small insignificant quantity.

[@JafffaAdventures]

@tonyf7997 I agree mate, but remember during the campaign they never actually disclosed there were 5 kits, so you walked into the promo thinking if you get the discount code, you got the deal. Transparency is not their strong suit in my humble opinion. Cheers 👍😎

[@tonyf7997]

@@JafffaAdventures - agree Terry. If a company is going to have a real sale do so but a bit like a bait advertising only having a few on sale with zero mention of that very important point … Cheers

[@crispyinasia61]

Good on you Terry, another ripper review. I looked at upgrading my panels, but gee you have to question the cost stepup and so i have stuck with the original set and using black gaffa tape (my car is black) on the top edges of the front panels as they are the ones that have come off on a few occasions, and that stops them lifting off by preventing the wind getting in behind. I spoke to a guy down here who has the new version an the only issue he made a point of was the number of times he has caught his shirt sleeve on the panels as they stick out a bit more. Good comments of yours on their marketing guff, I did look at perhaps trying to repurpose my current panels but they won't go at that.... so for the moment I'll stick with what I have. Avagreatone 👍

[@JafffaAdventures]

Thanks Andrew. I used the magnetic panels for years and they served me well. I’m sure you will get excellent use out of yours. Enjoy your travels my friend 👍😎

[@MB-ld6wq]

Hi Andrew, unfortunately there are a couple of reasons why the old magnetic kits cannot be refurbished with the new system. Firstly, the gauge of the material on the magnet kits is thinner and doesn't span without touching the paint, the thinner gauge material means the clearances in the fastener also don't work and it engages sloppily. The magnets are almost impossible to remove which would mean magnets are stuck permanently on the vehicle which as Terry has pointed out without maintenance can cause chaffing. Hopefully that gives some clarity.

[@VaughanMunro-js4nr]

Great Video Terry. Apart from Ronny Dahl's fitting it to the landcruiser and a Prado. You are the only other person I have seen on KZbin who has fitted it to 4wd. They are missing out on a chance to get their product out to the market. Not having a display vehicle fitted out and going to all the 4wd shows in Australia.

[@JafffaAdventures]

I could not agree more Vaughan, they are certainly missing a marketing opportunity. Plus getting out there with your own vehicle testing it is fun👍😎

[@MB-ld6wq]

Video content will be increasing

[@MudducksTouringAustralia]

Nice clip Terry, as you said on a full time Offroad truck they are fine, but my OCD would not deal with the clips when they're off. I have run the Bush Barrier panels but they also have some shortcomings, my new rig will be clear wrapped with the good stuff. Cheers Steve

[@JafffaAdventures]

Nice one Steve, thanks for sharing your perspective. Cheers👍😎

[@66pheonixpatrick76]

Well said - nice job

[@JafffaAdventures]

Cheers mate, I appreciate the kind words 😎👍

[@LimestoneCoastCustoms]

👍

[@VenidiciRobidici]

I was surprised you didn't tackle the rhino badge, somewhat. Are you keeping it unchanged for warranty purposes? Excellent vid tho. Very informative and reassuring with honest content 👍👍👍

[@JafffaAdventures]

No mate, it’s a thick rubber patch and the panels look horrible without anything in that recess. Maybe I’ll have to get a rubber Jafffa Adventures patch made up, that would be cool😎👍

[@VenidiciRobidici]

@@JafffaAdventures Upstairs for thinking, haha, adding 'value' to Jafffa. I'll remind you down the track 👍

[@Mr.Cyberdude]

Informative video

[@JafffaAdventures]

Cheers👍

[@bigfishfishing-111]

Hey Terry My 200 is a white one. In my previous comment, I mentioned that I picked up a brand new set of the magnetic Rhino hides off Market place for $400. They are grey in colour and look average on the car. It's not as bad as the black ones 😂 Autobarn mixes colour coded paint in a spray can. I'm considering spraying them. What's your opinion on auto spray paint? I may give it a go. I love your videos for the past 4 years. You're very clever.

[@JafffaAdventures]

Thanks for the kind words and support mate, I sincerely appreciate it. I think the rattle cans that Auto barn and other suppliers mix would be problematic, especially a light over dark colour. One scratch and you have cut through the colour and down to the dark panel below. Before too long it would look pretty ordinary. If I was going down the rattle can route, I’d use base coat as you described, but then hit that with a 2 pak satin clear. You can get 2 pak clear in a rattle can. The reason 2 pak is important is that it’s tough and can handle abrasions. Single stage clear would be as fragile as single stage colour in a rattle can. Don’t forget the plastic primer first. Go well mate👍😎

[@bigfishfishing-111]

Thanks, Terry. Appreciate the tips.

[@JafffaAdventures]

@bigfishfishing-111 my pleasure mate👍

[@stevenjohnson5024]

Hi Terry, Love all your content with all your traveling . Went into your maintenance section but could not find the new headlight install. Can you send me a link please. Thanks

[@JafffaAdventures]

Thanks for the kind words Steven. Stay tuned, that headlight video comes out in 2 weeks time😉😎

[@nathanwestaust9992]

Hi Terry...great video as usual. Just wondering what ceramic coat you have settled on? Its a mine field out there with all the claims that are made.

[@JafffaAdventures]

Thanks Nathan, I appreciate the kind words. I just went with Mothers CMX. I’m sure there are better products for the professional, but as a back yard hack I cannot fault it. I use it on my 57 Chevy as well👍😎

[@nathanwestaust9992]

Cheers. I use other Mothers products and are happy with them so ill give it a try.

[@JafffaAdventures]

Enjoy your journey mate👍😎

[@grahameroberts8109]

Informative. Did you fill your lungs up when spraying? 👍🏻🙏 Those magnetic panels are useless on Land Rovers. Lol. 🦘

[@JafffaAdventures]

PPE all the way Grahame. I hear ya with the alloy panels mate😉👍

[@MB-ld6wq]

Great video. Thanks for such a comprehensive review. Although you said defending claims is arrigant, I do want to clarify a couple of points. 1. The black Friday sale discount was allocated to the first 5 kits ordered. They were available at 50% off we released further dicounts over the day again in limited numbers, that wasnt a marketing dupe. You simply weren't fast enough unfortunately. The paint breathing is regarding moisture being trapped against the clear coat. Its not a dig at clear wraps, they dont have an issue as they are impervious. Good ceramic coat also addresses this issue, but the factory clear coat is not fully hydrophobic. When moisture is trapped against paintwork and heated it can cause paint "blooming". Admittedly Toyota's have great paintwork and not ever been an issue in testing but some other brands suffered from this in early prototype testing on versions not released which didn't allow airflow and the moisture trapped gets sucked into the clear coat. It looks like fog on a mirror like when you've had a hot shower on a cold day. Colour coding was extremely hard to manage sku wise but will likely be making a return in the near future so watch this space. As will more videos. Thanks again for taking the time to review.

[@JafffaAdventures]

Fascinating and not unexpected response. Here’s how I would have responded if it were my business. “Dear Terry, we very much appreciate your comprehensive review. As we continue to strive to improve our products and service, real would feedback like yours is extremely valuable to us. Your comments of feeling duped by our marketing campaigns have been taken on board and we will ensure greater transparency into the future. Also, we have listened to you and others and will bring back colour coding in the near future. Great idea about the second hand panels as well, we will table that as a discussion piece in an upcoming management meeting.” Or something to that effect. Instead you took the arrogant path and simply said, “we are right and here’s why”, completely discounting how a customer “felt”. That one act speaks volumes about your company culture and attitude towards your clients. I wish you the best and trust your arrogance will not get in the way of good client centric business decisions.

[@zeushellrider27]

I’ve been asking rhinohide for 3 years or more to make them for the 76 they already make 2/3 with the 79 they just need to make the rear panel my requests fall on deaf ears they just don’t seem interested. I would buy a set in a flash if they did.

[@JafffaAdventures]

Seems like an easy win for them as you point out. Very strange indeed. Thanks for sharing 👍

[@bigfishfishing-111]

I didn't want to hear that. I just bought a new set of Rhino hide, old school panels brand new for $400.

[@JafffaAdventures]

$400 is good buying mate. I ran the magnetic ones for years and they served me well. Cheers👍😎

[@babeyoulove1883]

Terry - You need to do a video on your new headlight mate.,.... come on now...

[@JafffaAdventures]

Stay tuned, that video comes out in 2 weeks time😉😎