4x4 2 Stroke Riding MOWER Gets 10x Better! Sounds like an F1 car

[@johnhiggs5932]

I love that you don’t quit a build. Your tenacity is inspiring.

[@jjhack3r]

"Mowing my neighbors lawns at 60mph in 60 seconds"

[@gdeanandson6402]

WaterBoy

[@SXSFURY]

Mowed in 60 seconds. Be a great movie lol

[@bvisel4558]

That exhaust is f****** sick. You are an amazing fabricator.

[@calholli]

Bro.. the pipe's diameter and distance from the ports are precisely calculated in order to set your power band at a certain RPM-- When you cut it anywhere in front of the expansion chamber, you completely change it's tune. It' still might work well, but if it doesn't, that's why. That expansion chamber echo's the pulse back to those ports, and it does this at a certain speed (actaully at the speed of sound I believe)--- so if you change the distance between the expansion chamber and the ports, then it will change where your power band actually is... Typically the bigger the pipe and longer/ further away from the ports, the lower your power band will be, because it takes longer to echo back to the port--- so that makes it only work at lower RPM's--- (but also the more it will fall on it's face when you high rev)...... and that's because at higher RPM"s, the piston is going up and down in such a short time span, that expansion chamber has to be closer to the ports so that the echo can bounce back quicker, not that it's any faster --- it just has to go a shorter distance, which takes less time. I just have to stress again, the tuning of the engine and power band are directly related to that expansion chamber- it's diameter- and it's distance away from the ports... hopefully it still works well for you--- but if not, just know that it's because of that pipe and you'll have to change it again. There's a whole science to tuning a pipe for a 2 stroke.. There are not a lot of people who understand exactly how to build them right without the computer software to tell them how to do it.

[@jjhack3r]

Yes.

[@baby-sharkgto4902]

You sound very knowledgeable and I agree with you.... being as knowledgeable as you are I figure that you can also hear that it is running very well. When he made his pie cuts he rotated the pieces but kept the pieces in the same order, had he rearranged the pie cuts the results most definitely would have suffered. At one point, many years ago I was thinking the results would change or be very poor, but after seeing dozens, if not hundreds of shifter carts take the original snaking motorcycle chambers and pie cut them and reweld them in to a straight line with little or no loss of performance I became aware that it in fact does not matter.

[@calholli]

@@baby-sharkgto4902 Yeah, it does sound pretty good.. Again, as long as the changes are still a similar volume and length from the ports, it should still be pretty close.. It sounds like it's running fine to me. I actually think his clutch is slipping. If you watch it again. 11:46 -- after he shifts, you can hear the engine rev out quickly for a second--- as if that clutch is slipping.. Maybe that's him doing it on the controls-- maybe he doesn't realize that you only have to 'feather the clutch on take off.. Either he's doing it, or it's slipping.. or maybe the wheels are spinning-- but something is letting go... You hear that smooth rolling load on the engine, and then after he shifts--- it high revs way too fast. Clutches are easy to change though. I've had issues with banshee clutches before... It would seemingly work fine until it would hit that power band, and then it would break loose. I bought cheap new discs on ebay and never had an issue with it again.

[@baby-sharkgto4902]

@@calholli yeah I also hear that

[@wrenchg3954]

F-Yeah they sound tough. My neighbor goes through fazes. So during his quad faze he naturally chose a banshee due to the performance possibilities. So as usual step one break it down to every last nut and bolt. Sends the motor out. $20,000 later this Crazy piece of Performance Art returns. I honestly thought that my buddy got Ripped off and it was just pretty. Oh how I was wrong. We couldn't start it right away because it ran race fuel not regular gasoline. My first words on the first start were, this sounds like a F1 car. That motor was so freaking pissed off I couldn't believe it. He actually only rode it a handful of times and sold it. We both agreed that it was a death trap and had too much power.

[@jasonpetrich4141]

4 mill cheetah motor ??? Or what

[@derpydog1008]

Man that bumper is going to come in handy for pushing the grave ninja out of the way lol.

[@urock0124]

Lol.

[@dicktrickle4197]

Burn 😜

[@viciouscycle6_698]

Lmao shots fired

[@finntrautsch2065]

That’ll make rather b happy… NOT!

[@davesonsadventures474]

Sounds like a punt was intended.. lol

[@kennethhacker1341]

Great job fellas!!!! I did a kz 100engine on a old 4wheeler back in 88 ...great to see young motor heads are still alive.

[@brandenpatterson2776]

Love the look of that bumper great build !

[@bryduhbikeguy]

Man Vasily, you killed it with this build ! Way-2-bada$$ ! Well done.Thank for your Bud's help too.

[@jeffreyness9741]

This kid is creative, skilled, has the right tools, has a great imagination and knows when something's structurally sound. Actually what's most impressive is his neighborhood. How he gets away with all this Street tuning blows my mind. I live in the city and I can have the police here in 2 minutes if I wanted. Also I'm the guy in the block that has the loud Sportster, loud scooter, loud Royal Enfield and I tippy toe out of the driveway out to the major roads before I get on it. Good for Vasily, also the neighbors Black dog seems to enjoy it.

[@calholli]

Great job on moving your shifter.. You still need to shift faster.. Once it's pulling in that power band, just shift through the gears literally as fast as you can and watch it pull through every gear. Trust me, when these things are running right, their power is pretty terrifying..... It kinda sounds like your clutch is slipping... either that, or you are too low geared and it's reving out before you can even shift to the next gear-- I can't tell without riding it myself... It sounds like it's running pretty clean though, considering that you chopped up that tuned pipe.. Keep chewing on it. There are more gains to come. lol.. Once you get it dialed in, it will start popping up wheelies when you shift while running wide open.

[@georgespurlock5547]

I love how you paint all nonchalantly because your welding is so on point!

[@justinstiff5641]

That's absolutely spectacular. Great job getting out, getting dirty and hands on bro! Awesome build

[@Henrik.Yngvesson]

It sounds awesome! Foot shifter will probably work fine. I'm paraplegic and built a hand shifter on my bike and I have a video on it if you want to see it.

[@MarkMachine_]

GOOOOD Morning neighbors. Time to wake up. Its lawn mowing time

[@DonnyT744]

This machine turned out real nice. I think it would be coo to get the factory head lights working also.

[@MichaelSabo]

I think a reaction video passing people walking their dogs at 60mph is in order 😂

[@Mikefngarage]

ON 2strokes its all about managing power band (torque curve) by exhaust flow and porting.

[@reggiexp69]

yup and he just messed that up pretty big

[@BBCMONTE34]

Glad to see the foot shift worked for you.

[@frankensteincreations4740]

Only a few companies make this style pipe for the banshee… 2 into 1 the sound is unreal, but they also claim it makes a totally different machine. Guess the way the power is delivered… sounds wicked!

[@adammorgan3195]

Sounds like a dynoport 2into1

[@reggiexp69]

@@adammorgan3195 its a dynoport, there are not many 2 into 1 pipes for banshee i think he would be better of letting someone make a custom one...

[@bighomieJ5X]

Thanks for the awesome 2 stroke content 👏🏾👏🏾

[@VasilyBuilds]

💯🙏

[@frankierutherford1888]

Not bad for a 11hp 38” mURRAY. She’s rapped up for sure. Well done 👍.

[@1one3_Racing]

Loving the revision vids. Most KZbinrs would be like "Yep, it's done. On to the next build" but nothing is ever good. It's always cool, but never good.

[@mlindsay527]

Yes! The fine tuning is the best!

[@jodiekingston2045]

Love the build!👍 having a banshee myself… U will always come back with a smile like man that was fun! I will never I mean never…. sell my banshee. ✌🏼

[@gearjammin_bluesman]

Wow! It's been a ton of fun following this build! Looks great! Sounds great! Totally awesome!

[@davidmckinney6577]

You take care of yourself buddy 👍👌👊 peace and God bless you my friend

[@tacticalkev.9124]

Dude, you do really nice work. I really like your attention to detail. You don't cut corners. Cool a#s build.

[@oscardeltoro898]

Amazing stuff, It seems like you'll need to re- configure that handle bar to use a bigger to smaller mechanism to obtain better faster turning radius.

[@jnlautotech9646]

You should make a cutout spot in between the headlights for the light bar that would be sick

[@JPLowery918]

I really think the background music is one of the greatest parts of this video

[@VasilyBuilds]

Awesome!

[@18wheeler77]

Looks clean. Only thing is, I don’t like the droop in the rear. Should get stiffer springs. Or adjustable ones. Love it nonetheless.

[@Nunya_Bidnez]

Dope idea. Flip up light bar from the hood. Huh? Huh? I was thinking of a screw gear setup like a snowblower Shute.

[@BruceLyeg]

That sounded awesome. That dog almost got ya on the way coming back

[@zangzang1268]

Beautiful job on the bull bar style front bumper.

[@asbjrnkvisle5831]

I loved the triple build, but I can see this works better. Do you have other plans for the triple?

[@calholli]

"Works better" on this mower maybe-- but that triple is significantly faster on the right setup... A triple sled will absolutely smoke a banshee quad-- both off the line and in top speed... He just never had that triple geared right yet before he decided to change it.

[@VasilyBuilds]

Maybe a drag build

[@angelrs_0838]

@@calholli He said that the cvt was way too low to the ground

[@calholli]

@@angelrs_0838 Yeah. .it wasn't a good fit for this.

[@asbjrnkvisle5831]

Yes, meant works better for this build.

[@allensandven0]

Unfortunately you may need to open that grill to move more air not sure if your running elec fan ? Consider that or some cowling to force air. Bigger radiator if or add small reservoir to displace heat exchange , heat steals power not your friend . Cool build keep at it and it will be terrifyingly fast lawn job , mowing , thatcher , aerating , twin bagger two pop multi purpose machine . And most likely neighbors enemy #1 If you continue to rip back & forth scaring the bejesus out of the unsuspecting ? It would be ok in our neighborhood but their a mile

[@shedtested27]

Really looking and sounding good now..coming together well.

[@baby-sharkgto4902]

I love the new pipe, looks great and sounds insane! You seem like a great young man but your neighbors are probably conflicted about that. Do they ever "talk" to you about all of the noise? Or do they not care one bit 🤔

[@VasilyBuilds]

my neighbors are not like ratherbwelding's

[@baby-sharkgto4902]

@@VasilyBuilds that's cool man, I'm sure you probably fix all the neighbors lawn mowers, and cars or whatever too 😎

[@msw3456]

@@VasilyBuilds that comment made my day XD

[@darthbiker2311]

@@VasilyBuilds 11:50 did someone set their dog after you though? 🤣✌️ Cool build. Thanks for all the amazing ideas. I'm building a gas scooter using your videos as a guide.

[@josecadena4637]

@@VasilyBuilds lmao not ratherbewelding😂😂

[@reigningobscurity]

The Murhee sounds so good!! Great job!

[@DktheWelder]

That sounds awesome!

[@Canadian_Craftsman]

This BEAST is still so unreal to see RIPPING around and sounds AMAZEBALLS badass bro!!😁✊🔥✌💚

[@danielastrom9643]

the thing that makes a low end tourqe exhaust or high end is the lenght and curves before the expansion chamber so you should be looking to make it as close to how it whas when you got it

[@Ham_Strokers_Ejacula]

God I love the sound of a bridged 2 stroke exhaust, miss my snowmobile lol

[@ProlificInvention]

Excellent build man, I like it.

[@christophermorin9036]

Now all it needs is a fan and to rework the rear fenders, they're occasionally touching the wheels when it squats.

[@bikelifeDave]

You changed the performance of the pipe when you altered it. Everything you read about that pipe has now changed. The bottom end power you were talking about will be different from the original pipe. 2 strokes 101

[@VitaliyKhomich]

I was also thinking about that but he just changed the angles instead of left to right and vise versa

[@timothyhays1817]

Yep. Jennings two stroke tuning book is a must read for two strokers.

[@reggiexp69]

yeah plus he choped up a pretty good pipe that you dont see alot (maybe in the usa its not that rare but in europe it is) but yeah he messes up the pipes... i tought he would know by now.. cant just modify a 2 stroke pipe, the form model and size of how it goes is EVERY THING and he just cuts it up

[@VitaliyKhomich]

@@reggiexp69 This pipe is also very, very, very unique here in United States. I have one and I almost punched my phone watching him cut that pipe.

[@reggiexp69]

@@VitaliyKhomich i mean he replied to me he paid 175€ for it. (wait euro i guess he means dollars) anyway for that price i understands that he cuts it up, doesnt change the fact its a well sought after banshee pipe i think. but he was better of getting someone make him a custom exhaust might be more expensive but it will atleast be build for the tractor and shit

[@josephmadden3096]

Wow that sounds amazing 😍

[@soueuluan]

Man, your neighborhood must love you!!

[@Pbk306]

Man I wish I had your brain! I have a off road mower myself. But you have some serious talent!

[@tothlacko8290]

A little tip.. It is a2 stoke...don't use enginebrake! specially in high rev range

[@sbjennings99]

Awesome informational educational video experience Y'alls God Bless Y'alls 🙌 ❤ 🙏

[@ndieselndiesel2006]

Your neighbors must hate you. Awesome build 👌

[@VasilyBuilds]

Me and my neighbors get along great

[@garretts91]

Fuck that. You're using a public street as your playground to test loud ass projects. If I was your neighbor I'd put a stop to it. The builds are awesome but the disrespect isn't. Test your builds where it isn't a nuisance. Once you're old enough and have your own place, you'll understand.

[@lucsurmon3205]

Thank you for Building m'y christmas gift ! 😉

[@psavel274]

The exhaust DOES make it sound like an F1 car. Nice!!! Bumper looks great. You should dremel out the area where the stock headlights are and see if you can cleanly mount the light bar setup in that area. You could make a fiberglass 'bezel' or 'pod' to make it look like it belongs in that spot too. Would be sick looking.

[@jeremyperraud1357]

You should wrap your exhaust with ceramic bands to prevent over-heating because your coolant hose line is in between the exhaust collector

[@that14yomechanic28]

You wire some leds in the stock head lights then you have lights and the stock body

[@larry_to_goated7716]

Love the sounds in the intro

[@robertordewald8678]

Are you having overheating issues? The airflow may be the culprit. The hood openings are very small vs. the size of the Radiator. Either open the grill up or open the side panels beside the grille or possibly near the winch plus do you have an electric fan on the radiator. Nice buggy!!!

[@RudboyDread901]

I SEE U LIL BROTHER JUST CAUSE ION COMMUNITY ON EVER VIDEO I BEEN WATCH U KEEP DO YOU THINGS TRY TO PUSH OUT 2 video a week u got a few our build I ain't forgot about got gone get them up and running LIL BROTHER 🤘🤘🤘

[@mkultra4542]

Any issues with cooling ? . . . maybe add a 12V radiator-fan .

[@Theboys-tn5lf]

Before this video starts after the ads I’m gonna take a wild guess you put a 2 into one onto it

[@jessejohnson2089]

Dude I hope you are proud that is amazing! Great job vasily, just those improvements way better.

[@calholli]

11:48 ... See, it's reving smooth under load, and then right after you shift- it revs out/ high revs too quickly there --- like the clutch is slipping. The 6 speed transmission have really close gear ratios-- so you could actually be running out of gear that fast, which means you are too low geared and need to change sprockets slightly... or again, you can just shift faster. But honestly, it sounds very typical of a clutch slipping when the power band hits, or when you're rolling on the throttle... Make sure that your clutch cable has a little bit of slack in it/ a little wiggle room-- so that you know it's fully disengaged.. Some people like to tighten their cable down too tight so that there is no slack, and that can cause it to not fully close--- it acts as if you're constantly slightly holding the clutch in a little-- which causes it to slip.... Either way, it sure sounds like it's high reving quicker than it should there--- something is letting go. Maybe you're just spinning the back wheels on that pavement-- I can't really tell.

[@jakobro1794]

I also believe the clutch slips when engaging a new gear. I agree, check if clutch cable has little bit of play. This thing is gonna be awesome. This video you really were different, quick and efficient. Keep it going like this

[@rabbyredpath3598]

The clutch is definitely slipping, possibly the cable too tight, or plates on there way out

[@DavidToyotaHead13]

You can hear the chain and sprockets skipping. Needs to go to a ribbed belt design or a better chain.

[@r1too]

Any thoughts of cutting out the center to lower seating position. Cool ass little buggy..

[@calholli]

It's pretty sick. lol.. The fact that it's 4x4 is awesome.

[@tjw1789]

Cool man, I enjoy your videos, God speed. Be careful on that thing

[@jacobbrewer5803]

That thing is awesome. Love me some 2 stroke.

[@joshhung-flakeproductions2588]

What a coincidence, grind hard also recently made a vid on mounting a winch😂

[@Kindaquick1]

You know it sounds great when dogs try to race you.

[@RC-fu6hg]

Are you going to put a tip on the exhaust so it comes out the back? All that two stroke smoke will leave a residue all over the rear suspension and fenders.

[@sbjennings99]

I would have mounted the light bar low too it will work just fine 🙂

[@сегасега-ч5д]

Красавчик👍 продолжай в том же духе😁 классная техника👍👍👍

[@tylerwatts1004]

Really cool exhaust and sounds fantastic. Love the bumper also, great build Vasily!

[@Maga4Lyfe]

It’s coming along really good. Great job kid.

[@joshuamelton10]

Sounds freaking amazing even though it’s breaking up stills sound good love the build bro

[@jonard7037]

This things sounds awesome! Like a cross between an F1 car and a Nitro R/C car. Speaking of nitro... I wonder how it would run on that stuff. Amazing build over all man! Great job.

[@jameswarren423]

Insanely bad ass and boy does it sound good keep up the great work👍🏼🤩

[@prostockultra5722]

Sounds like it needs more fuel up top. Add some main jet

[@CS12172]

Vasily I have a question- my go kart with a stage 1 kit goes a solid 26mph lol. I was wondering if I you removed the governor on your little red go kart you made a video on and rode around a school with. Because when you went full speed and hit 51, wouldn’t that blow the engine? I don’t know I’m just wondering the circumstances if I removed the governor and went full throttle. - Thank you

[@alant5335]

I bet your neighbours love you,racing up and down the road!

[@Herbybandit]

I bet your neighbours love you! And that black labrador is now on a mission to get you 😉

[@1994maroz28]

Can i ask why you turned the wheel back and forth the way you did when doing the burnout

[@CementSmokeR1]

That pup had it out for you brotha lol… but that mower is definitely bad ass

[@steviefigs4677]

Your neighbors must love you

[@gchsbus]

This is super cool as long as this guy don't live in my neighborhood. That noisy exhaust would drive me and the neighbors crazy. Im happy he built something awesome he enjoys. Just, why so loud?

[@davesonsadventures474]

Sounds like the chain is jumping teeth on the sprocket and you really should get a better seat one that wraps around you for your protection.. pls over all great job this thang is sick!

[@two3fpv]

I love how it's like the shittiest riding mower you could have, I had one of these and it was such a pos. Keep these videos coming Vasily, I'm hooked.

[@RogerM88]

Dude, are you related to the Goonzquad brothers? You look like Simeon. Great build.

[@richmills6911]

Dam boy uve built a monster

[@acurarl9929]

Gear ratio sounds good on the road but that’s it. In the woods you can’t hit gear after gear in the powerband because the gearing is to tall and you need a super low first gear anyways so drop that gearing so you can have a useable woods toy.

[@PHUSII]

i think that water line between the exhaust gets heat up a lot.

[@jasonpetrich4141]

Now it's in power band!!!!! Much better

[@calholli]

One other thing--- when you run it hard like that--- you should cruise around a bit and get plenty of air flow and let it cool down... or at least when you stop --- let it idle for 40 seconds or so. It keeps that water flowing in your head and gives it time to cool down. WHen you ran it hard and then suddenly STOPPED. All that heat is still chillin in your coolhead and that's why it started steaming that water............. again, what I do when running it hard is take another lap easy cruising-- still running fairly fast, but not pulling hard and making heat-- that way you still have lots of air flow through that thing.. and by the time you stop again, it will be much more cooled down.

[@jessebarragan6288]

Sound awesome your neighbors must love you lol

[@glennzlotowski8020]

Sounds like my banshee back in the 90s with the team motofast 2 into 1 system

[@Judah-morrison]

Wen are you going to finish the cross cart

[@johnmorgan1629]

Vasily how's the arm coming along? Man that's a speedy lawn service.

[@tetrakite]

This beast isn't too noisy. Pretty sure your neighborhood can appreciate. ;-)

[@EngineeredToDesign]

Man that thing sounds cool would make people look twice!

[@somethingelse2740]

Nice build but you need to add more larger louvers in that front grill. Your engine and radiator will thank you.