5 Reasons Why I HATE My Cammed Mustang GT

[@Balrog124]

Who did you have to bribe to be able to legally drive this in California?

[@flubdreload2818]

$2K for cam install on that Stang is a rip-off. Most I can see is $500.

[@kennyG990]

Book time is 9-10 hrs... plus gaskets, new phaser bolts, shop supplies (cleaners, silicone sealant, assembly lube, shop towels etc.) and any extras that may be found while the engine is opened up, oil change afterwards is recommended, anything under $1000 for the install is a deal

[@brianshaggy]

@@kennyG990 9-10 hours for a professional? I did mine in 2 hours lol

[@buckfutter99]

BikeLifezx10rT I rebuilt the top end of my K20 with TODA cams and accompanying hardware. That engine is a bitch. No I’ll never work on it again. Currently at 65,000 miles of abusive 9k fast and furious shifting. Worth it though. Edit: my one day planned project took 4 days. 2 percent f which were just data driving. The hondata community really helped.

[@roybell583]

I bought all parts and the cheapest I've found to do it is $1700

[@roybell583]

4.10s are better for autos, run 3.73 for stick

[@Shutchohole]

Your 4.10 gears are hurting your fuel consumption far worse than your cams will.

[@alecaygt]

It has an overdrive gear though lol

[@ericwagner413]

@@alecaygt well yeah but so does ever mustang

[@kcampbell4098]

My GT500 does not have any of the problems and it drinks heavily. I did not buy a 500HP touring car concerned about fuel consumption. I am currently at 650HP at the wheels....

[@UNR4TEDGUNZ]

So true about having the car in a garage, reving and hearing that echo lol

[@jimbrow83]

You have no cats wtf you expect it to smell like smh

[@msm402]

Detroit Rockers...Got 365HP on the dyno with bolt ons,410 gears, and stock coils and plugs.That was being conservative with the tune,and twisted to 6700 rpm's.Great choppy idle,good low and midrange,and pulls like a bear! The car is a blast to drive,with no bad manners.Sally needs some dyno time,dude.Forget that Bama stuff.With your mods,it's time to bring it all together.Are you done with school?Might be time to leave Commiefornia and move somewhere where you can mod your wheels and not have to worry about getting pulled over because some cop doesn't like the sound of your cams.I enjoy your videos,Nate!Sally is lookin' good!Oh,and check out a Barton shifter.Completely bolt in,no adjustments.You'll be glad you did.Good luck!

[@NateRider]

thanks man! i loved all this information! can't wait to see how sally does and yes . i need that shifter!!!

[@mikejames1860]

Catless straight piped 03 GT 4.6 V8 running 4.10 gears with forged delipped pistons looking at adding Whipple supercharger

[@noviefros8911]

Mike James damn, sounds like a beast

[@WhoThisGuy515]

I bought the detroit rockers and did the install and CMDP 1. my cammed 07 gets the same 13mpg on 90% town driving and 24mpg at 80-85 on the highway after i did my cams. Your decrease is probably due to the way you drive after the swap 2. I kept the cats so i don't have the smell issue 3. Yep i noticed a good deference on the Throttle response and low end but i kept my 3.55 gears (wanted 4.10s but they were on back order for 2 months everywhere and my pinion bearing crapped out) 4. Price is a little high but totally worth it to me 5. The 4000rpm+ power band is much stronger to me (which i do get to quite often) and i rev mine out to 6500.

[@cdubu18]

I will agree the low end torque is mehh with the hot rod cams I rectified this with a torque converter, i lived in Houston at the time and a major torque convertor distributor was down the street. Went 3200 billet stall and its night and day!

[@andrewmako7366]

Nate does not have a torque converter.

[@RayLoveJr]

them 410 gears definetly eat gas on the higway (well period). 373 for me!!!

[@NateRider]

yeah its realllllyyyy bad lol

[@UNR4TEDGUNZ]

Bro your riding on the edge of life with 4 mile to empty...

[@kevinb.3656]

Arco has a lot of impurities in the fluid. I would look into it and into switching from Arco to 76.

[@groove775]

Nate, great video bro! You know there's nothing you hate/dislike about your car! Lol Sally looks amazing like always!

[@NateRider]

haha nothing!! thanks man

[@colegreen99]

Stink mostly because flash tunes usually run rich to be safe on any and every mustang they flash get a dyno tune to lean it out a little and get your numbers right the smell will go away and by getting the air fuel right you will pick up some torque I had same issue with my cammed 3v

[@NateRider]

you couldn't have said that nay better. dyno tune coming after i get new meat

[@JCnordic2983]

I agree

[@zackcash7277]

Exhaust burns your eyes because its running too rich. The tune your using puts more fuel in the intake causing an excess. Not a problem and should not cause an issue. It is what is when you run a race type of tune

[@prospenda]

Beautiful car guy!! ❤

[@thomasmarquez6790]

My Mustang uses corn fuel....

[@biggtastee2401]

The low end torque is not because of the cams, it's because you removed the CMCV's. They are engineered into the stock OEM manifold for a reason....and that reason is....wait for it......LOW END TORQUE! Educate yourself about your engine FIRST before you start throwing parts on it.

[@ronforister8374]

Try to do a video of daily driving the car with cams vs stock.

[@NateRider]

i will :)

[@kamryn7496]

The #1 reason to cam a 4.6 3v is because at 1 point in time your roller followers will fail an eat up your camshaft an then you will have no other choice but to put cams in it that’s my issue now with my 09 lol

[@cj95ize]

Love the content all the time man gonna buy my self a s197 👍

[@NateRider]

nicee man! you're gonna love it!!

[@franciscofernandez203]

Do a small video on the rear window Louvers, don’t know if I want them or not

[@NateRider]

ive done some. go check out my channel. look at my exterior mods video

[@AdroitJake]

So.....Im installing cams 2 days from now. I saw the title to your video and was like....ah shit! I better watch this. Watched it....butthole unpuckerered! 😆

[@100thomasmagnum]

U kept a straight face when u were doing a pull...i am usually grinning. Ahaha.

[@NateRider]

hahaha i gotta work on my face. im trying to record, not spin out, hit any crowds, or pull any other mustang moves LOL

[@jaehjona]

I love the intro 😅

[@lmv1668]

Look like sid from ice age jaja 😂

[@NateRider]

haha i look like a lot ofpeople

[@zackcash7277]

Savage lol

[@jasmine5982]

Your car sounds so good 🤤

[@NateRider]

thank you jasmine!!! :)

[@theprofessor-bi5eh]

So would those air fresheners add 50 horsepower?

[@Sirtee96]

This just about made me cry considering I’m still trying to save up for cams 😭😭😭

[@nfsking4826]

All about dyno

[@silverbulletS197]

Just bought your air fresheners. Got 1 of each scent cuz theyre both that damn good! Lol

[@NateRider]

i just shipped yours out man! thank you so much for the support

[@markrobinson63]

Sick ass air fresheners! And I changed my tune back to 87 octane so I’m not paying 3.99 a gallon haha I can’t imagine ugh

[@NateRider]

yeah its pretty bad! lol hopefully it gets better!!

[@foristj]

What benefit did you notice from the Charge Motion Delete Plates?

[@JustinAlanW8]

Forist Johnson probably very little. Shouldnt delete unless you are going turbo OR NA with 4.10 gears LT headers and 62mm TB.

[@foristj]

I do have 4.10 gears, complete Exhaust Long Tubes as well as Off Road X-Pipe.

[@NateRider]

kinda hard to tell since i did the install the same time as long tube headers and camshafts, but multiple resources say 10hp

[@foristj]

Thanks for the Reply back.

[@WhoThisGuy515]

I'm putting this here for future people. The CMP actually close off 75% of the port until 3000 (i think maybe 3500). When they open they don't go straight up and down either they are still slightly angled which hurts airflow. With mine they were also caked with cooked oil and were probably 3-4 times thicker then the plate originally was. Unless you absolutely need then or never go over 3000rpm ( why do you even have a Mustang then) delete them.

[@coyotekelly7143]

Nate try not to let your fuel get so low. that's terrible on the fuel pump.

[@NateRider]

yeah imma get it check out on the dyno

[@bullittstarter4408]

Sounds great!

[@NateRider]

thanks man!

[@bullittstarter4408]

Nate Rider dude, you live in LA or San Diego right? If you are ever up in the Sacramento or San Fran areas, hit me up! We’ll do some runs and see how Sally pulls against my 08 Bullitt!

[@keenanking722]

I have a 06mustang gt but I need it now and cool 😎

[@Machlifes-]

Can believe i been here since 500 subs and no 13k

[@NateRider]

damn thanks for the love and support! we are continuing to grow!!!

[@icey7225]

Bro you should do a gt500 front conversion kit and the black mamb venom hood

[@dudebro7227]

how would it cost 2000?

[@JuggusNawt]

You gotta put the cats back on man.. Don't make people behind you that are trying to like and appreciate it suffocate. It will make people more likely to vote against these types of machines. you dont lose very much power with cats anyway.. they arent worth cutting off..

[@Racerx215]

I have a question Ever since I put comp cams in my 08 mustang for some reason at lower rpms it will jerk forward or if I’m racing and I try to launch at like 2500 rpm it will die to about 500 then take off not sure what’s wrong with my car if I need to upgrade my gears cause I have stock gears or something I don’t know what to do

[@jbfirebird1]

It would help if you didn't slip the clutch when shifting

[@carlogandullia1316]

Bro I just got a mustang like yours but its all stock, just wanna know whats your 0-60 and like how much horsepower you got to see if modding it will be worth it. Im in love with Sally awesome job

[@michaellevenduski7263]

Do you have the link for your cams.

[@hams1005]

Great videos homie. You should do a Dyno day and document. I'm going to do the same before I slap nitrous on her and then after

[@NateRider]

thats to come after my new tires!

[@hams1005]

Awesome man can't wait to see! Compare #s

[@vitoaugello1677]

Air fresheners...lol. Got to be kidding. You kids are amazing. Should have put your photo on them. They would surely sell like hotcakes....

[@taylorchafin2849]

If you want good gas mileage than why did you cam it?

[@brianpreston3052]

After camming how bad did the mpgs goes down.

[@salvadorquintana67]

Hey bro hope im a huge fan i hope you see my comment, I've been wanting to cam my s197 but havent figure out a way to pass a smog test with my engine cammed, how did you do it?

[@JonFox1945]

How do you pass the smog with cams in california?

[@DavidHernandez-hp3je]

Camshafts this camshafts that

[@NateRider]

gotta love camshafts

[@moto6ixmoto83]

The smell ain’t from the cams it’s from running the off-road H-pipe

[@NateRider]

true

[@Fordf-td6wq]

how are the 4.10s on the freeway too much drone?

[@brandoncollins6621]

damn almost $4 for gas lmao

[@NateRider]

its over $4 now!

[@stevie9361]

You wearing concealer makeup?

[@hknux5112]

No 93 octane in your area? I tend to use it on my 05 Monte Carlo S/C.

[@denniss4951]

I haven't seen 93 in California since the 1990s.

[@negativesplits06]

We don’t have 93 in NM either :(

[@NateRider]

nah just 91...

[@marcosaruca5283]

your cams are not killing your gas its your 410 gears

[@footwearXP]

When is the weight reduction series coming? 🤔

[@denniss4951]

If you have to run high test octane you might as well be running a blower. IMHO.

[@NateRider]

i know i really do lol

[@pierstonsalinas940]

U could upgrade yourTQ by getting a drive shaft 😉

[@NateRider]

yeah thats coming for sure when i get more power!

[@Mcarbajal113]

Damn, here in NC, Premium(93oct) is $3.05

[@NateRider]

you're so lucky!

[@haterget1nb3ast]

Damn in Bama it’s only like 275 a gallon for 93 octane

[@NateRider]

i needa move over there lol

[@specops1903]

It's 400 where i'm at in cali

[@JCnordic2983]

Just install it yourself buddy!

[@yochaielgrabli1934]

I just bought my first car it’s a 2006 mustang what upgrades u think I should get first

[@joseesquivel3749]

Yochai Elgrabli v8 or v6?

[@yochaielgrabli1934]

Real Madrid F.C v6

[@joseesquivel3749]

I also have a v6 for now and honestly it isn’t that fast... I will buy a 5.0 soon .but I will start off with a cold air intake ,throttle body, throttle body spacer, and full exhuast

[@NateRider]

cold air intake, tune, and exhaust!

[@yochaielgrabli1934]

Nate Rider thanks man

[@jjhickson2104]

U need to make a vid with that guy marlin

[@MichaelReeves412]

Nate you gotta take off your exhaust and cats and listen to the lope of the cams completely open headers. I ran my car open headers before i got the straight pipes put on and even with the stock cams it sounded like it had upgraded cams. I can't imagine how yours would sound

[@denniss4951]

That wouldn't be smog legal.

[@denniss4951]

That smog equipment is there to keep our air clean. It's stupid to take that stuff off. Especially if you live in a basin.

[@NateRider]

imma get cutouts soon!

[@MichaelReeves412]

I'm running Long Tube Headers in California, I stopped caring about Smog a loonnnggg time ago. Now, I'm Long Tube Headers to Straight Pipe with no cats, DEFINITELY not passing smog this year LOL

[@TheSharpBuckle]

You need to work on your shifting. Your lugging would go away.

Driving a modern car below 1/4 tank of gas.

[@JCnordic2983]

But then you boost it!

[@goshdornit1355]

Dang I like those air fresheners, I might just have to cop some of those

[@NateRider]

do it man! i would appreciate it!

[@dustynglynn1306]

Oh yeah, imma grab some air fresheners:)

[@NateRider]

do it man! i greatly appreciate it :)

[@davidsmith-ve7oj]

whats that song

[@dylnfstr]

My pretty much stock GT gets only 12mpg. Anyone know why?

[@cyberprimate5511]

Are your spark plugs fouled? Is your air filter clean? Is your air flow sensor clean and working properly? Are your O2 sensors working right?

[@dylnfstr]

@@cyberprimate5511 turns out the spark plugs were fouled. This was also causing major throttle hesitation/misfiring. Never threw code. Changed the plugs and a cracked coil and it’s running like new again!

[@cyberprimate5511]

Glad to here me throwing everything that came to my mind possibly helped figure out the issue! How’s your mpg now?

[@IN54ANE]

Almost cut your fingers for that thumbnail lol.

[@NateRider]

things i do for you guys lol

[@JCnordic2983]

Ha, your supposed to have a toy and a daily!

[@bonsaiocean]

The exhaust is so bad because you went catless.

[@carlosgomez4664]

First bro like alway

[@NateRider]

your the best my dude

[@boostopher]

I wanna see a dyno on sally! And a supercharger hehehehehe

[@denniss4951]

Let's make him get forged internals first so he doesn't throw a connecting rod through his engine block.

[@NateRider]

dyno after new tires!

[@flubdreload2818]

Dennis S he won’t. The rods can handle 450whp. I don’t think he’d plan on putting more through the car.

[@denniss4951]

I dunno man pushing more than 400hp at the crank with this engine with stock internals seems like running on borrowed time. If I do mine I might go 525 horsepower with forged internals. I just don't want to break my car :)

[@s197gt6]

U put arcoo gas that's why it stinks.

[@bigolejosh1281]

😂😂me and you have the same mileage on are moostangs 2008 mustang gt deluxe

[@johndough7039]

you went from hate to love...... baitish headline

[@alexdjgonzo9410]

Dude do you have any lights on dash on (check engine)

[@katieadams5860]

Gas milage is defently a big issue, especially after our idiot president ripped the Iran deal causing gas prices to rise.

[@germanshepherd13]

Its Putin's fault per Brandon

[@nef003]

I wonder what you think about our current MORON. Gas prices are now 4.99 and up. With the previous administration it was 1.67$ a gal. Huh???

[@DrDerty]

Clickbait