Mustang camshaft selection and install guide

  Рет қаралды 313,305

Four Eyes

Four Eyes

Күн бұрын

Пікірлер: 1 000
@johnnywright4116
@johnnywright4116 5 жыл бұрын
The quality of your videos are insane man please don’t ever stop. Love the videos
@dogsandcars202
@dogsandcars202 5 жыл бұрын
It sounds really good man. I’ve been missing your videos, please make more!
@everythingjonathan8008
@everythingjonathan8008 4 жыл бұрын
Can ears get orgasms because I think mine did
@kobesn1fan24
@kobesn1fan24 5 жыл бұрын
Why skip to the lope?? It sounds the best hearing it transitioning it from a cold startup to idle....
@kenfoster8120
@kenfoster8120 5 жыл бұрын
Best 3 valve cam install video out there. Thanks !!!
@17456spartan
@17456spartan 5 жыл бұрын
Dude, I was super close to buying Hot Rod cams for my car, but now you have me thinking about Detroit Rockers! Thanks for another awesome video.
@Four_Eyes
@Four_Eyes 5 жыл бұрын
They're both great choices, but I do think the Rockers are slightly more optimized for power (we'll see!).
@3nigma.3nc
@3nigma.3nc 5 жыл бұрын
@@Four_Eyes How long did it take you to get the Detroit Rockers? Looks like Brenspeed has them on back order.
@davidlarricksmith468
@davidlarricksmith468 4 жыл бұрын
I was thinking about mother thumpers, now I’m thinking Brenspeed too.
@masonmaldonado5318
@masonmaldonado5318 2 жыл бұрын
@@Four_Eyes did one of you Detroit rocker cams come in a comp cam box or did brenspeed goof my order
@christophercraftery8369
@christophercraftery8369 3 жыл бұрын
Thank you for this video! Extremely insightful for the instal and extremely well done.Just put them on my ‘05 GT along with a Brenspeed performance tune (and some other stuff). They sound great! I have 2 suggestions to add having done this myself: 1- You will very likely get “some” debris in your valve train in the process of removing your valve covers/manipulating the cams, etc. so I would suggest dropping your oil after you tighten the new cams, and pouring some oil onto each side so any debris drains out, then go ahead and add new oil & filter. 2- when you’re removing the cam phaser bolt, use an air gun if you have it! Getting it off quick makes it less likely to disturb the timing chain.
@daimyo_one
@daimyo_one 5 жыл бұрын
Nice build. I see your making good progress. Most importantly thank you for being conservative and tasteful with the car. No goofy wings....or well you get the point.
@mr.m6315
@mr.m6315 Жыл бұрын
A true man's how to video, straight to the point and got it done in an appropriate amount of time.
@brandonellingson1953
@brandonellingson1953 5 жыл бұрын
If you made everyday context you'd be in the millions for subs. Good stuff. Keep up the GREAT content!
@Four_Eyes
@Four_Eyes 5 жыл бұрын
Ha thanks that's very generous.
@anthonylaudano9751
@anthonylaudano9751 4 жыл бұрын
@@Four_Eyes I agree on the body style. I have a 08 gt500 a 07 Shelby gt and a 07 427 edition convertible super snake.Love the body style.But I also love the 10 look.I have a 10 grabber blue super snake and a couple of cobras also but my favorite car is my torch red 08 gt500.The 500 has a modest 850hp and my 10 is 900hp.But even with those numbers my 07 Shelby gt is 325hp and I still enjoy that car.I can use all the power vs trying to use half the power in my super snakes. I love your car RETRO GOTTA LOVE IT.
@omegargb236
@omegargb236 4 жыл бұрын
@@anthonylaudano9751 how many fucking Shelbie's do you have hot damn
@bryanb6310
@bryanb6310 3 жыл бұрын
@@omegargb236 prolly zero
@aldouseri5671
@aldouseri5671 5 жыл бұрын
This is one of best looking 07 mustangs I ever seen!
@nathanjones-walker8482
@nathanjones-walker8482 5 жыл бұрын
The quality of these video are amazing. Great job! Can’t wait for the next one
@xx_Mr_IQ_xx
@xx_Mr_IQ_xx 5 жыл бұрын
Thanks for the update. You inspire me to build my 2008 gt instead of 5.0 swapping keep up the good work
@maleleeld
@maleleeld 5 жыл бұрын
This is the best video on KZbin on replacing cams!!
@ericrubio5858
@ericrubio5858 3 жыл бұрын
I’m here a year later looking to cam swap my 3v and I’ve got to say this is the best video out there.
@Four_Eyes
@Four_Eyes 3 жыл бұрын
Appreciate it, glad it helped.
@saulespinoza5646
@saulespinoza5646 5 жыл бұрын
Finally you post !! Awesome ride man gotta love our s197
@3vchristian
@3vchristian 4 жыл бұрын
This is super late but this video is the reason I was able to install my camshafts on my 3v! I decided on the BBR Stage 1 cams and I couldnt be happier with the chop and huge difference in performance. Thanks for making this video!
@dakotajones8010
@dakotajones8010 5 жыл бұрын
Sounds amazing major respect for not just throwing in hot rod cams but ik u are actually researching how to build a 3V not like these kids i see all the time cant wait to see more vids keep em coming
@dustinjennifercapitolinehill
@dustinjennifercapitolinehill 5 жыл бұрын
Rarely do I comment, but having just acquired an 05 for a project, your videos have been a huge asset. Outstanding quality and clear content for the adults in the room. Subbed.
@msm402
@msm402 5 жыл бұрын
Great video,sir! Detroit Rockers do just what Brenspeed says they'll do.Good drivability,great sounding idle,and they make decent power.The NA grind also works good with superchargers,if you're thinking down the road.I'm running them in mine,and i love 'em...
@Tony-rs1cv
@Tony-rs1cv 5 жыл бұрын
Sounds incredible man great job on the install and great tutorial video! The quality of your videos are amazing keep up the good work and keep the videos coming. My Mustang is the same color as yours and I went with the frpp cams but had a shop install it after seeing your video it made me feel confident that I could have tackled the install myself. Anyways thanks for taking the time to share your videos hope to see another one soon.
@Revrbz
@Revrbz 5 жыл бұрын
Favorite series for the S197 please keep going with this series and when its finally finished let's do something else with it
@dg9291
@dg9291 3 жыл бұрын
About to troubleshoot a ticking noise. Possibly a bad cam roller follower or stuck lifter. I've watched this video multiple times. Thanks for posting and assisting DIYer to tackle these kinds of issues. I have a 2006 Mustang GT the same color as yours. Love it.
@benjaminaltman2871
@benjaminaltman2871 Жыл бұрын
Man the sound of that idle makes me want to make terrible financial decisions
@Joseoverdosed
@Joseoverdosed 3 күн бұрын
There only one grand but same here and I’m 18
@davidmartin2231
@davidmartin2231 5 жыл бұрын
As soon as you called out the other tubers, I smashed the like button on and off about 20 times lol. Thank YOU for not abandoning your platform. Was wondering where you were. I know that you’ll tell us in another video what happened prior to this video. Good choice on the brenspeed cams. They are proven and work well with forced induction. And yea, it sounds sooo good. 💪🏾😎
@Randomcharacters_
@Randomcharacters_ 5 жыл бұрын
You have amazing quality and care into your videos! By far the cleanest 3V on KZbin.
@banshee4268
@banshee4268 5 жыл бұрын
I like how you explain pretty much everything you need to do to install them! That actually helps a lot
@groove775
@groove775 5 жыл бұрын
FINALLY! Great job man! I did hear you one day down by the Airway Dr. ! Man does it sound amazing! Keep the videos coming and I'll keep watching!
@johnbrummet524
@johnbrummet524 3 жыл бұрын
I have a 2010gt, i went with the brenspeed detroit rockers. Luv em. Very drivable, choppy idle, and on the dyno the graph shows a climb the whole way, never drops. A bunch of cams are cool id imagine. Ultimate choice depends on what the car is for, in your life.
@HoustonScrewedUpCIty
@HoustonScrewedUpCIty 5 жыл бұрын
Was reaaaaally hoping you went Comp Cams Stage 2 NSR for a second but I have to say those Detroit Rocker Cams sound a lot better than I imagined.
@kalipoo713
@kalipoo713 7 ай бұрын
Amazing, amazing, amazing video. Can't say it enough. This helped me tackle my cam install. I took my time, did my research and, mainly because of this video, was able to install them. I had some hiccups, but nothing that wasn't my own clumsiness' doing. Thank you Four Eyes for making my first dose of engine work an awesome learning experience!
@danielroberson5421
@danielroberson5421 5 жыл бұрын
When I first got mine I didn't have the Kooks long tube headers with h- pipe once that was installed I noticed a big power difference. Before only on top end range. Yes, they do sound great. Please make more videos. I personally love my Brenspeed cams which I read on Mustang Forums they produce more power than Ford Racing Cams.
@angenicaaugust3211
@angenicaaugust3211 3 жыл бұрын
Where do I buy the cam from
@CrowdControl123
@CrowdControl123 5 жыл бұрын
Great video! You must work in the business. Not many rookie youtubers start off with such high quality content and editing. If I'm wrong, take it as an even higher compliment! I came for the Mustang. I subscribed for the quality.
@byf4ith
@byf4ith 5 жыл бұрын
Wow. My next summer project. Thanks for breaking this down.
@streetlegal2065
@streetlegal2065 5 жыл бұрын
Sold me on the Detroit rockers. Was originally looking at the hotrod cams, this video changed my mind. Moving over to Instagram to follow you rn 👌
@davidbadgett6332
@davidbadgett6332 5 жыл бұрын
awesome....LOVE THE DETAILS OF THE Install ….. AND THE SOUND
@jerichocorey9802
@jerichocorey9802 2 ай бұрын
Fantastic video - I used it to install mine. Didn’t miss anything because your video was perfectly detailed.
@thatguy35968
@thatguy35968 5 жыл бұрын
Great video bro, glad you picked the Detroit Rockers, you got a great series going here
@aaronmassie98
@aaronmassie98 5 ай бұрын
Great Video, I actually installed the same Cams in my 2006 Saleen Mustang from the steps of your video. It’s really not hard but took a little time. Definitely a 1 day job and I did it myself. I am not a mechanic but am mechanically inclined. Thanks for making it easier for me to do this install. Your car is sick!
@steveninclan9539
@steveninclan9539 5 жыл бұрын
I really appreciate your 3 valve build thanks for making these vids for us 3 valve lovers
@xSN1P3ZZzz
@xSN1P3ZZzz 5 жыл бұрын
Your video quality is mad good. I don’t own a mustang but I respect people that can give proper instructions . Got my sub
@diegovega9004
@diegovega9004 5 жыл бұрын
Please keep making this videos!! They help alot thanks.
@xShiftyyy
@xShiftyyy 5 жыл бұрын
Your like to dislike ratio shows how much we want your content. If you go to events or get together with other car guys bring out the camera. That could be some good content, you’d blow up!
@Four_Eyes
@Four_Eyes 5 жыл бұрын
Thanks Shifty - roger that.
@SupremeAchievements
@SupremeAchievements 5 жыл бұрын
Hearing the deep grumble gave me goosebumps. Good sh*t bro!
@TehMemos
@TehMemos 5 жыл бұрын
Car sounds absolutely aggressive ! Love the sound man
@coltoncaskey5781
@coltoncaskey5781 5 жыл бұрын
Please make more videos more often I love your channel. Such clean editing
@Armygunner
@Armygunner 4 жыл бұрын
Coming from a certified diesel mechanic you did an excellent job
@Four_Eyes
@Four_Eyes 4 жыл бұрын
Thanks dude really appreciate that 🙏
@austinlolzzzz
@austinlolzzzz 5 жыл бұрын
Hell yeah hes back!! Nice work man
@sourdan
@sourdan 5 жыл бұрын
The production quality of your videos is ABSURD. Easy sub, and I don't even own a Mustang.
@nelsonjyspd
@nelsonjyspd 5 жыл бұрын
Again a very clean and descriptive video and the ride sounds great..I have a set of Detroit rockers spec'd for my roush m90 supercharger..but I need a shop to do the install.
@coyotekelly7143
@coyotekelly7143 5 жыл бұрын
Finally! I traded my fbo hot rod cam 3v in on a 18 mustang GT since your last video, but I will always have 3v love.
@Four_Eyes
@Four_Eyes 5 жыл бұрын
Sweet upgrade for sure
@xXThis_LifeXx
@xXThis_LifeXx 5 жыл бұрын
That fucking sounds amazing ! I've been looking forward to seeing this video from you, nice work as always 👍
@josemontes9105
@josemontes9105 4 жыл бұрын
Dudebro continue to make videos man. You honestly got one of the baddest three valves out there
@Four_Eyes
@Four_Eyes 4 жыл бұрын
thanks brew ✌
@baseballblake42
@baseballblake42 5 жыл бұрын
Yesss bro I’ve been waiting for you to come back lol
@double-a-mma6855
@double-a-mma6855 5 жыл бұрын
BTW, this is the best sounding mustang I’ve heard on KZbin (or ever) in my opinion
@mikespeck8642
@mikespeck8642 4 жыл бұрын
I really love the sound of the Detroit rockers, but my goal is for more power over sound, but to stay streetable. So I've come up with a combo for my f150 5.4 3v that "I think" will give me what I'm looking for. Custom grind cam, intake 235°@.490 lift, exhaust 230°@.500 lift With 112°lobe separation , port match the intake and exhaust, shorty headers, cat delete w/dual 2.5 exhaust w/xpipe. Hope this works.
@alpha2gproject783
@alpha2gproject783 Жыл бұрын
Long dead thread but you're more or less wasting your money. First, the shorty headers do absolutely nothing for you so whatever gains you do get will strictly be through the cams. The second are the cams in general. Unless you can get intake adapters to fit something other than the truck manifold you'll barely see much of a gain over 15 wheel because the stock manifold can't flow enough. The heads can support an easy 250-350 wheel but it's the intake that lets the 5.4 down.
@undeadkiller0143
@undeadkiller0143 5 жыл бұрын
Hey man! I'm lovin the videos! Being a 2006 mustang GT you're definately giving a great basis to go from!! Keep em comin!
@stylin60es
@stylin60es 5 жыл бұрын
Definitely getting these.. like after I get my license.. Then my car..then nm. Anyways sounds dope af ✊
@Angelo-dv5nm
@Angelo-dv5nm 5 жыл бұрын
stylin60es same dude
@raymondsolano1780
@raymondsolano1780 5 жыл бұрын
Great choice of the cam. The sound is awesome and does not have that large lop sound that sounds like a drag car. The videos are fun to watch and gives great information on upgrades. Great job.
@sethschronce376
@sethschronce376 5 жыл бұрын
That thing sounds nasty man! Once again one of the best car channels on youtube 👍
@bullittstarter4408
@bullittstarter4408 5 жыл бұрын
Just joined the channel; great video. The details on the install set you apart from basically all other mustang channels, and place in you ChrisFix territory. Looking forward to watching the channel grow!!
@Four_Eyes
@Four_Eyes 5 жыл бұрын
Thanks man ✌
@HandSolo1
@HandSolo1 5 жыл бұрын
Welcome back old friend...
@karoshi42
@karoshi42 3 жыл бұрын
the warm idle sound gave me CHILLS
@josephbishop8677
@josephbishop8677 5 жыл бұрын
Love my Detroit Rocker cams...brenspeed did a great job. Awesome video.
@antonleimbach648
@antonleimbach648 6 күн бұрын
Wow, that sounds great. Your engine is nice and clean and it really shows how much work you do on your ride. Great instructional video, I would use it if I changed cams on a 3V mustang. Thank you!
@craigmcleod5032
@craigmcleod5032 5 жыл бұрын
Awesome sounding cams, really helped me on which way to go on those. Keep it up.
@emiz32
@emiz32 3 жыл бұрын
Changing those cams was way easier than I thought it would be next mod for my stang forsure
@coreywhitacre6581
@coreywhitacre6581 5 жыл бұрын
Love the sound of the new cams. And nice work on the how to portion.
@jmmustangs3078
@jmmustangs3078 5 жыл бұрын
Man glad to see another video!
@jmmustangs3078
@jmmustangs3078 5 жыл бұрын
Made that look way to easy to swap them out. Another great video
@harleyed6830
@harleyed6830 5 жыл бұрын
Good job. I feel confident that I can do this install myself now. I like those cams too, they sound awesome. Looking forward to your next video and some dyno numbers !!
@Four_Eyes
@Four_Eyes 5 жыл бұрын
You definitely can. I forgot to mention it's probably a good idea to buy replacement valve cover gaskets.
@rogernichols7957
@rogernichols7957 Жыл бұрын
I know I’m kinda late to the party, but if you do install these yourself will it run without a tune?
@WildfoxFabrication
@WildfoxFabrication 11 ай бұрын
@@rogernichols7957definitely get a tune
@edwardberwind8544
@edwardberwind8544 5 жыл бұрын
Great video, Sounds Awesome, It's a pleasure to have someone (You) actually show what has to be done without all the B/S
@ttoad0088
@ttoad0088 5 жыл бұрын
I can't wait to see the new dyno numbers with the cams installed. Hopefully you see 350 bhp
@JRMSpeed
@JRMSpeed 5 жыл бұрын
DAAAMN that thing is raw! Best exhaust sound/ Cam/ How-To/ S197 videos on the tube bruh. Fantastic brother! I'll be doing the same cam upgrade on my 06 GT Vert this Spring 2020, myself - ALL thanks to your video. Just have to find a good tuner.
@PiterStreak
@PiterStreak 5 жыл бұрын
Great stuff man. Love the way you break everything down and how you explain things. Subbed. Looking forward to future videos
@Four_Eyes
@Four_Eyes 5 жыл бұрын
Thanks for subbing!
@1chamoy20006
@1chamoy20006 4 жыл бұрын
WOW, i've watched two of your videos and they're so professional, informational and entertaining to watch! Very well done.
@jacobwadley9583
@jacobwadley9583 5 жыл бұрын
sounds wonderful! keep up the great work man!
@jakeelliott238
@jakeelliott238 5 жыл бұрын
Omg it sounds amazing! Been loving this series been here since the beginning!
@hechtspeed
@hechtspeed 5 жыл бұрын
Awesome video man! Sounds badass!!!! I really want to do the detroit rockers in my 05
@thebrotha4545
@thebrotha4545 5 жыл бұрын
Bro, that thing sounds brutal...I love it.
@ryanmartin4053
@ryanmartin4053 5 жыл бұрын
That idle sound is sick. Love it. Another great video, I’m getting a stock 05-09 gt soon. These vids are inspirational. Thx again 👍💪🤟
@bradleysmith4563
@bradleysmith4563 5 жыл бұрын
This is a great video. Very detailed, which is nice for guys like me. A lot of information is skipped in videos like this because a lot of the information is assumed to be common knowledge which might not be for all aspiring mustang enthusiasts. Keep up the great content. thanksP.S. I love the performance upgrades in the 4 stages
@stangasm2678
@stangasm2678 5 жыл бұрын
Sounds mean. Always good videos and content. Keep it up.
@deadshot4245
@deadshot4245 11 ай бұрын
hands down you have the best lookin gt of this generation dog
@vulcan-900bobber7
@vulcan-900bobber7 5 жыл бұрын
Very informative you now have a new sub😊
@BUILTFORDTOUGH79
@BUILTFORDTOUGH79 5 жыл бұрын
Wow. First view on your channel personally...what a sick sounding/looking car. Damn
@dannygarcia511
@dannygarcia511 5 жыл бұрын
*First 10 seconds Intro* already like the vid and subscribe. Keep it up!
@henryweller6417
@henryweller6417 5 жыл бұрын
I went hot rod cams before a tune i picked up 20 peak torque 60 curve and 30 peak horse 45 curve and the chops with my exhaust setup are a very unique sound
@Blaqandbloo22
@Blaqandbloo22 5 жыл бұрын
Those Detroit cams are eargasmic... hey, quick warning before you jump into the rabbit hole that is suspension upgrades on your S197... don't make the same mistake that I did. If you are going to lower the car any distance at all, realize that the further you lower your suspension, the more stress/wear&tear you will put on certain components. Changing said parts out for adjustable versions of them will greatly reduce said stress. IE. the 05-09 parts that usually should be replaced when you lower the car include adjustable front sway bar end links, adjustable tie rod ends (aka. bumpsteer kit), ball joints, adjustable rear upper AND lower control arms, and adjustable panhard bar (alternatively, throw out the panhard bar for a Watts Link kit, which is expensive). I'd advise for KONI STR.T shocks/struts, and SR Performance's Strut Tower Brace and 1.5" Lowering Spring Kit. Best value you can get, but keep in mind lowering the car will come with needing to upgrade some of the suspension to adjustable parts. Love your channel, love your videos. It's a damn shame you don't have more subs/views, because your quality>quantity approach is hard to come by in the car community these days. Kudos.
@Four_Eyes
@Four_Eyes 5 жыл бұрын
Thanks for the thoughtful comment. The suspension upgrades will constitute a near-complete overhaul. Definitely not just getting coil-overs and calling it good.
@Blaqandbloo22
@Blaqandbloo22 5 жыл бұрын
@@Four_Eyes Great to hear! Genuinely looking forward to what you choose and what you think about your choice, because I like hearing differing opinions and approaches to upgrading S197s
@randytheracer3664
@randytheracer3664 5 жыл бұрын
What I think about the new sound DAMN
@darkhorsef1002
@darkhorsef1002 5 жыл бұрын
Sounds great. I had CompCams stage 2 NA cams. I ran those with my Department of Boost supercharger M122. I'm now running a VMP GEN2R supercharger and Bullet stage 3 blower cams. Drivability suffers at low RPMs but topend power with 20lbs boost is insane! My 3v is in a radical 1968 F100.
@Four_Eyes
@Four_Eyes 5 жыл бұрын
Wow dude that is a crazy build! Super cool rig. I always loved Road America on Forza 4.
@jaynosowsky9708
@jaynosowsky9708 5 жыл бұрын
With the new cams, you can use the new ford performance intake manifold.
@Four_Eyes
@Four_Eyes 5 жыл бұрын
Yep - will be running some dyno tests nows.
@jonnyrothfusz6466
@jonnyrothfusz6466 Жыл бұрын
Great video. You missed one thing there are a couple rocker-folowers that need to be reseated with a spring compressor after the cams are installed. Something about how the cams sit, the rocker-followers want to come out. This happend to me and cause one of the cyilinder 8 intake valves to drop. The ford performace install guide depicts which rocker-followers to reseat.
@playboi6411
@playboi6411 5 жыл бұрын
3v 4.6’s in my opinion are the greatest sounding engines of all time.
@ArthurNava
@ArthurNava 5 жыл бұрын
This is my next mod, nice ride man.
@Four_Eyes
@Four_Eyes 5 жыл бұрын
Sweet! Thanks Arthur.
@justicedavenport6388
@justicedavenport6388 5 жыл бұрын
By far Ford performance hot rod cams all day best imo
@justinm.791
@justinm.791 5 жыл бұрын
Damn that sounds badass, and I'm looking forward to the next step!
@kevinj7425
@kevinj7425 5 жыл бұрын
Long live pushrods 😂😂
@wayniexagt
@wayniexagt 5 жыл бұрын
yep i do like the build and the way this car looks .. love the way the cams are so easy to change ... and sounds just right for how i would want a car to sound ... not in your face but you can tell its not standard . Good work
@dennisgarrett144
@dennisgarrett144 5 жыл бұрын
Ha cross your fingers & turn the key lmao........ 93 fox with a 347 stroker....whoops any OHC or DOHC at the track all day long
@Dr.Westside
@Dr.Westside 5 жыл бұрын
Long live the pushrod .
@USArmyZ28
@USArmyZ28 5 жыл бұрын
I had hot rod cams in a 2010 GT from 5k miles to 108k miles with no problem and it sounded great. Videos are still on my profile
@tonycoffee7335
@tonycoffee7335 5 жыл бұрын
The sound.... I think my pants got tighter....
@iamcyberpunk68
@iamcyberpunk68 5 жыл бұрын
lay off the cheeseburgers assface.
Transforming this slow 4.6 into a screaming coyote killer
18:08
Four Eyes
Рет қаралды 6 МЛН
Mustang GT Ford Racing Hot Rod Cam & Intake Manifold Install (05-10 4.6L)
12:09
Late Model Restoration (LMR)
Рет қаралды 301 М.
黑天使只对C罗有感觉#short #angel #clown
00:39
Super Beauty team
Рет қаралды 36 МЛН
Sigma Kid Mistake #funny #sigma
00:17
CRAZY GREAPA
Рет қаралды 30 МЛН
Ford GT Mustang: HOT ROD CAMS (Before & After)
4:23
NEO AUTO
Рет қаралды 336 М.
How to install a T56 Magnum
19:38
Four Eyes
Рет қаралды 777 М.
This is what a 50% increase in horsepower looks like
6:26
Four Eyes
Рет қаралды 1 МЛН
The Right Way To Modify Your S197 Mustang! (2005-2014)
14:58
Easiest way to install cams in a 4.6 3V 2005-2009 Mustang GT
15:05
Showing the world what an all-motor 4.6 Mustang can do
7:03
Four Eyes
Рет қаралды 2,1 МЛН
2006 Ford Mustang GT Thumpr™ Cam Install
7:54
COMP Cams
Рет қаралды 322 М.
Squeezing Coyote power out of a 4.6 Mustang (without boost)
8:06
5 Reasons Why I HATE My Cammed Mustang GT
8:15
Nate Rider
Рет қаралды 60 М.
黑天使只对C罗有感觉#short #angel #clown
00:39
Super Beauty team
Рет қаралды 36 МЛН