544 RWHP N/A 6.0 Silverado combo package!!!

  Рет қаралды 20,020

Elvis_ect

Elvis_ect

Күн бұрын

Пікірлер: 121
@robertmontalvo597
@robertmontalvo597 Жыл бұрын
Thank you for doing both English and Spanish. More shops need to do that. Its more than just Mexicans that like fast trucks lol
@Elvis55
@Elvis55 Жыл бұрын
Yes! I try my best I have a lot customers of both sides!
@Tazerect
@Tazerect Жыл бұрын
Check out freddy lsx it’s like 90 percent English
@lsx_evan
@lsx_evan Жыл бұрын
@@Tazerect ong, they never speak spanish anymore. back in the day they barely spoke english perro 🤣🤣
@TeddyDub17
@TeddyDub17 Жыл бұрын
This truck runs so good!!!!! Maybe that’ll be my next setup up🤔 what gears is this truck on?
@1lentagmc
@1lentagmc Жыл бұрын
Thanks again bro truck came out strong and powerful 🔥
@Elvis55
@Elvis55 Жыл бұрын
No problem 👍 truck put good power!!
@melvincosey7606
@melvincosey7606 Жыл бұрын
What exhaust system are you using
@tripstomexico9770
@tripstomexico9770 12 күн бұрын
Broooo post more vids on ur channel🙏🏼 this bitch is a beast💪🏼
@jorgemoreno8316
@jorgemoreno8316 Жыл бұрын
I got this cam in my lq4 stock 243 milled.30 with tbss with a 4k stall nd 3:73 excited to see what it will run!
@Elvis55
@Elvis55 Жыл бұрын
This truck had the 243’s with ms3 cam on nnbs intake out down 428. Not bad
@jorgemoreno8316
@jorgemoreno8316 Жыл бұрын
@@Elvis55 now its new setup spicyy!! what would you think I’ll put down with e85?
@IAM_HC
@IAM_HC Жыл бұрын
@@Elvis55 @jorgemoreno8316 Post some videos of your build, I’d love to see how it comes out and sounds. I’m building a lq4 with 243s polished and milled .20 with a tsp 220 and 5.13s. Lifted 4x4 on 38s build. And same excited to see what I’ll do especially with being a 4x4. I’m predicting at least 350 rwhp. I’m also doing larger injectors, and 30 overbore. I’d like to try a 4 barrel efi with a single plane intake for the snappy throttle response and the aesthetics however from what I’ve seen I may lose low end. Likely throw a tbss intake to play with different setups and see how it responds. That’s what it’s all about right?
@TeddyDub17
@TeddyDub17 Жыл бұрын
@@Elvis55crazy that’s my set up on my c10 !!!!😮
@gallo71359
@gallo71359 Жыл бұрын
Que tipo de fuel system usaste? Injectors and fuel pump? You guys should do the ported intake to see the difference in gains.
@Elvis55
@Elvis55 Жыл бұрын
Injectors son de FIC fuel injector connection, y son 60 libras. Fuel pump es la 450 walbro Manguera es la original con un regulador de gas. That port it intake should be a good test.
@gallo71359
@gallo71359 Жыл бұрын
@@Elvis55 6.0s are underestimated, but they sure can get up there before doing some serious mods. Good content 🔥
@dmoore91478
@dmoore91478 Жыл бұрын
how did you go about doing the throttle cable to the gas peddle
@Elvis55
@Elvis55 Жыл бұрын
Summit Slaes the throttle body cable. Lokar Hi - Tech LS throttle body cable.
@dmoore91478
@dmoore91478 Жыл бұрын
@@Elvis55 what about the pedal. Did that truck come with a dbc or dbw
@CGPRacing
@CGPRacing Жыл бұрын
Que chingon jala la neta y chido video
@pazlsx8761
@pazlsx8761 10 ай бұрын
Question did the owner do pistons and rod’s upgrade?
@jmg_2_slow74
@jmg_2_slow74 Жыл бұрын
So I got a gen 3 6.0 so I can put all of that & I won’t have ptv clearance?
@Elvis55
@Elvis55 Жыл бұрын
Yes, heads are stock mill
@jmg_2_slow74
@jmg_2_slow74 Жыл бұрын
@@Elvis55 ah ok thank you
@Papisartee
@Papisartee 5 ай бұрын
@@Elvis55if they are stock height heads why the longer pushrod? Curious.. Is it for the cam? I have a 6.0 bored 6.2 tryna what size pushrod i need
@cody72rs10
@cody72rs10 11 күн бұрын
What cc chambers? And what compression?
@cartelmigi7044
@cartelmigi7044 4 ай бұрын
Question what’s all done to the truck besides those new mods and links would be greatly appreciated!
@bowhite1293
@bowhite1293 2 күн бұрын
6.0 F35 PRC 260 heads 102 Hi Ram Auto trans 544rwhp?
@6ohaintslow
@6ohaintslow 7 ай бұрын
How much torque did it put down?
@drewster956
@drewster956 Ай бұрын
Any track numbers , power seems amazing
@dobleaaracing2204
@dobleaaracing2204 Жыл бұрын
What converter did you use boss? Any milling to the heads?
@Elvis55
@Elvis55 Жыл бұрын
No milling, and converter it’s a 4c
@romantijerina5364
@romantijerina5364 9 ай бұрын
That was a huge improvement. What cam was in it before
@1slow96
@1slow96 Жыл бұрын
What exhaust set-up sounds good!!!
@jose38706
@jose38706 Жыл бұрын
Badass setup! I just got done with my 03 silverado. Did a L87 swap, wondering if there's another L87 swapped single cab out there 99-06
@Elvis55
@Elvis55 Жыл бұрын
Just seen one in The Valley. L87 put good power!
@jmg_2_slow74
@jmg_2_slow74 Жыл бұрын
What did you do I’m trying to do a l86 10 speed on my nbs
@jose38706
@jose38706 Жыл бұрын
@jmg_2_slow74 well I did a LT swap because I want a reliable setup. Take it to mexico, anywhere I want. If you looking for max performance I would keep it LS but built. LT fuel system it's expensive. But if yes, it is possible and not hard. I made my 03 cluster work. All my gauges work with the 2022 engine setup.
@timbowalk
@timbowalk 5 ай бұрын
Almost another I have a 2000 Sierra rcsb with a 65 over lq4 with cnc'd 799 heads coming together but I'm thinking of going turbo
@Tazerect
@Tazerect Жыл бұрын
Can the heads let you run a Lsa super charger since your running a high ram ls3
@NoNames-oi5sd
@NoNames-oi5sd 18 күн бұрын
What stall are you running
@GM_Trent
@GM_Trent Жыл бұрын
Was this a stock bottom end 6.0? Or is it bored? If it’s sbe, that’s some great power!
@Elvis55
@Elvis55 Жыл бұрын
SBE 6.0
@cesarvillagrana733
@cesarvillagrana733 4 ай бұрын
What head gasket did you use?
@albertchaidez6317
@albertchaidez6317 7 ай бұрын
what cam was in it before? what gears? very stout build. but even 420 wheel was a very healthy set up
@lakarma0118
@lakarma0118 Жыл бұрын
what size pushrod did you end up using ?
@Elvis55
@Elvis55 Жыл бұрын
7.52 this truck using ls7 lifters.
@jankycustoms6089
@jankycustoms6089 Жыл бұрын
I have an lq9 with a truck Norris do you think I’ll still get solid Gains from the high ram and cam swap with out the heads
@Elvis55
@Elvis55 Жыл бұрын
What other mods you have, like gesrs, stall converter & headers?
@jankycustoms6089
@jankycustoms6089 Жыл бұрын
@@Elvis55 I have a 3600 fti 4l80e lq9 headers cam and 4:10 gears
@jankycustoms6089
@jankycustoms6089 Жыл бұрын
@@Elvis55 or should I do heads and cam and run a tbss and do the Holley later on
@Elvis55
@Elvis55 11 ай бұрын
@@jankycustoms6089 with that stall converter and gears get a bigger cam, something around the 238/242. You will gain good power combine with the Holley.
@alexandergranados5644
@alexandergranados5644 11 ай бұрын
​@@jankycustoms6089Throw that cam away and get a better one
@jorgequezada78
@jorgequezada78 Жыл бұрын
You could get more if you get more fuel ?
@Elvis55
@Elvis55 Жыл бұрын
No, unless your maxing your injectors. But adding more fuel will not gain more power. You do need to get your AFR at a hood point. Some builds like a little rich or with more air, not where you ganna lean the engine.
@630filmz4
@630filmz4 Жыл бұрын
Quick question was this a lq9 or lq4? Great content btw you earned a subscriber 🤙🏽
@Elvis55
@Elvis55 Жыл бұрын
Lq9
@rodrigobarreraloaiza
@rodrigobarreraloaiza 3 ай бұрын
Algun combo para un motor 5.3 que recomiendes para un buen desempeño
@macdaddy887
@macdaddy887 Жыл бұрын
Yo nice idle what kinda nunbers u have for your overspeed underspeed
@MyTiresDontBurn
@MyTiresDontBurn Жыл бұрын
Yall linked the 92mm hi rise, yall running the 102mm tb on that?
@Elvis55
@Elvis55 Жыл бұрын
Yes we running the 102mm
@MyTiresDontBurn
@MyTiresDontBurn Жыл бұрын
@@Elvis55 just checking, i thought you had to use the 105mm for it to flow with it
@Elvis55
@Elvis55 Жыл бұрын
@@MyTiresDontBurn it will help more using the 102mm intake with throttle body. But you might not see much difference. This guys bought the parts from another guy for a good price.
@5kwattz
@5kwattz Жыл бұрын
Mange dip,, they sale it at feed stores.. 💯❤️🍻🔥 🐕
@melvincosey7606
@melvincosey7606 Жыл бұрын
Man what exhaust setup is that
@Gladiatorguy1998
@Gladiatorguy1998 Жыл бұрын
Impressive.
@horaciovazquez4803
@horaciovazquez4803 2 ай бұрын
donde te ubicas ando ocupando un jale de esos yo estoy en Dallas tx
@julianbarroso271
@julianbarroso271 Ай бұрын
this was a lq4?
@JoseVazquez-oz1by
@JoseVazquez-oz1by Ай бұрын
Que más tiene la troca ?
@sidewayzsteezy
@sidewayzsteezy Жыл бұрын
any 5.3 combos?
@Elvis55
@Elvis55 Жыл бұрын
We been thinking of doing one.
@DELOBUENOMYBOY
@DELOBUENOMYBOY Жыл бұрын
Whats up bro , what fuel pump and injectors is it running ?
@Elvis55
@Elvis55 Жыл бұрын
Fuel pump it’s a 450 walbro and injectors we are using the FIC 60 lbs. (Fuel injector connection)
@DELOBUENOMYBOY
@DELOBUENOMYBOY Жыл бұрын
@@Elvis55 thank you brotha 🤙🏽 badass set up
@1lowNNBS
@1lowNNBS Жыл бұрын
What rpm limit do you run the high rams at?
@Elvis55
@Elvis55 Жыл бұрын
We shifting this one at 7k
@1lowNNBS
@1lowNNBS Жыл бұрын
@Elvis55 what rpm do you recommend boss?
@Elvis55
@Elvis55 Жыл бұрын
@@1lowNNBS shifting with similar set up, 6,800-7,000
@1lowNNBS
@1lowNNBS Жыл бұрын
Thanks for the info!
@slowvertiblefoxbody6604
@slowvertiblefoxbody6604 4 ай бұрын
Whats the specs on the wheels? S77?
@rico4x224
@rico4x224 10 ай бұрын
How much for this package??
@thesinglecabfamily
@thesinglecabfamily 8 ай бұрын
I’m doing the same setup but I’m using stock 6.2 823 heads , what head bolts did you use?
@thesinglecabfamily
@thesinglecabfamily 8 ай бұрын
And what head gaskets did you use?
@sixty4garage
@sixty4garage Жыл бұрын
good numbers, would make like 580 if it was three pedals
@IsaacKapone405
@IsaacKapone405 3 ай бұрын
Nah
@westcoast443
@westcoast443 4 ай бұрын
Un 5.3 package bro
@AlbertVen75
@AlbertVen75 8 ай бұрын
What year ?
@felipearrieta2649
@felipearrieta2649 Жыл бұрын
What heads? Link to them?
@Elvis55
@Elvis55 Жыл бұрын
We just link them. F35 camshaft 257 Prc heads from Texas speed Holley hi ram Ls3/L92
@felipearrieta2649
@felipearrieta2649 Жыл бұрын
Will this set up work good on 6.2 ls ?
@Papisartee
@Papisartee 3 ай бұрын
@@felipearrieta2649its a 6.2 top end
@towaim.
@towaim. Жыл бұрын
What type of fuel you use ? e85 ?
@Elvis55
@Elvis55 Жыл бұрын
93
@towaim.
@towaim. Жыл бұрын
@@Elvis55 Awesome
@6slow_lsx
@6slow_lsx Жыл бұрын
Flycut pistons?
@Elvis55
@Elvis55 Жыл бұрын
No flycut
@jaimea9151
@jaimea9151 Жыл бұрын
What cam shaft what is it ?
@Elvis55
@Elvis55 Жыл бұрын
F35 from Texas speed
@jsperformance2982
@jsperformance2982 Жыл бұрын
What injectors are those
@gtoantonio
@gtoantonio Жыл бұрын
bad ass video bro , cool vibe
@Elvis55
@Elvis55 Жыл бұрын
The dog bro 😢
@boostedwidow
@boostedwidow Жыл бұрын
🔥🔥🔥
@fernandoreyes1340
@fernandoreyes1340 Жыл бұрын
80? n what gears?
@Elvis55
@Elvis55 Жыл бұрын
60e and 4:56 gears
@fernandoreyes1340
@fernandoreyes1340 Жыл бұрын
@@Elvis55 lq9 id say ?
@felixortega21
@felixortega21 9 ай бұрын
🖕🏼a 80e for N/A the 60-65e will work just fine just has to be build right
@seanmccaskey6427
@seanmccaskey6427 Жыл бұрын
@SLEEK888
@SLEEK888 6 ай бұрын
Bro feed and bathe that dog, forget everything else
@lego4x638
@lego4x638 Жыл бұрын
ima need this
@lsxday
@lsxday Жыл бұрын
Stock bottom end??
@Elvis55
@Elvis55 Жыл бұрын
Yes
@Aaron-ge9my
@Aaron-ge9my Жыл бұрын
What stall does it have ?
@Elvis55
@Elvis55 Жыл бұрын
4k
@guerolil
@guerolil Жыл бұрын
Lost torque?? Sacrifice low end to get some on top... with that intake...go better with a ls3 intake or lsx..bad ass video tho 👌
@Elvis55
@Elvis55 Жыл бұрын
We have a 4K stall converter and 4:56 gears, to make up on the low end.
@mikee2398
@mikee2398 5 ай бұрын
Maybe try 2 different versions in different languages. If you only speak one language it's annoying lol
@cartelmigi7044
@cartelmigi7044 4 ай бұрын
Question what’s all done to the truck besides those new mods and links would be greatly appreciated!
@BenjaminGonzalez-zt5mc
@BenjaminGonzalez-zt5mc Жыл бұрын
🔥🔥🔥
How to Build a 700whp 6.0 LS
21:47
Tyre Fryer
Рет қаралды 541 М.
10 Minute Cam Swap!
10:17
Bo Builds
Рет қаралды 982 М.
Sigma Kid Mistake #funny #sigma
00:17
CRAZY GREAPA
Рет қаралды 30 МЛН
小丑教训坏蛋 #小丑 #天使 #shorts
00:49
好人小丑
Рет қаралды 54 МЛН
the ULTIMATE street and strip silverado is FINALLY done
27:59
Lawrence LT Tolman
Рет қаралды 138 М.
LS3 HEADS ON A LQ9, LS3 HEADS ON A LQ4
21:16
RNM GARAGE
Рет қаралды 2,5 М.
The BADDEST Cummins Truck on YouTube
13:31
Decent Garage
Рет қаралды 142 М.
@ONDGAS Supercharged LSA Silverado 6.0 Build 700hp+
13:11
BoostDistrict
Рет қаралды 45 М.
Sigma Kid Mistake #funny #sigma
00:17
CRAZY GREAPA
Рет қаралды 30 МЛН