7.3 idi diesel race truck build ep.14 the little stuff

Hit like and subscribe for more idi videos. Until next week, check out these other #idi #6.9 #7.3 #diesel #bricknose #bullnose videos!
What to look out for when buying a used 6.9 or 7.3 idi diesel part 2
• Buying a 6.9 or 7.3 id...
What to look out for when buying a used 6.9 or 7.3 idi diesel part 1 • BUYING a Ford 6.9 or 7...
3g alternator upgrade in 6.9 or 7.3 idi diesel ford
• 3g alternator conversi...
7.3 idi engine wiring harness color codes and sensor locations
• 7.3 idi diesel wiring ...
The truth about idi injector return line kits
• The truth about inject...
Wiring you high idle to a manual switch.
• IDI diesel manual high...
Old timers trick injection pump repair in a bottle
• 6.9 7.3 idi diesel inj...
How to bleed air and prime a 6.9 or 7.3 idi diesel fuel system
• Bleeding air out of th...
Replacing power steering lines in my 6.9 idi
• 6.9 idi ford truck pow...
Idi coolant flush and refill
• 6.9 or 7.3 IDI diesel ...
Ford shower head fuel pick up to fuel sump
• Fuel sump install bull...
Ford fuel selector valve replaced with brass 3 way valves
• ford fuel tank selecto...
3g alternator swap to upgrade your old externally regulated alternator • Ford 7.3 idi diesel 1g...
Facet electronic lift pump installation
• 7.3 idi facet Duralift...
Where to plumb in and hook up aftermarket gauges to an idi engine (oil pressure, water temperature sender locations) • 7.3 idi diesel gauges ...
How to change 7.3 idi glow plugs • 7.3 idi diesel Ford e3...
7.3 idi race truck build part 1 tearing down the crash test dummy
• 7.3 idi diesel race tr...
7.3 idi manual glow plug button how to • 7.3 idi diesel glow pl...
7.3 idi fuel heater delete mod • 7.3 idi diesel ford fu...
High torque starter in a 6.9 or 7.3 idi diesel • Ford 6.9 idi diesel du...
Reviving a 6.9 idi diesel by hotwiring the fuel shut off solenoid and doing a manual glow plug button • 6.9 idi diesel crank n...
Basic wiring to hotwire and start a 6.9 idi from under the hood
• NO KEYS NO PROBLEM! Ho...
Basic wiring to hotwire and start a 7.3 idi from under the hood
• Start a 7.3 idi diesel...
Diagnose and test a heater defrost system that is not coming on
• Troubleshooting and re...
Heat only blows on high DO THIS!
• Heat only blows on hig...
Check out these videos for more information on my #wmo #blackdiesel centrifuge set up.
5 ways to save $ setting up a waste oil centrifuge
• Waste oil to black die...
5 hidden costs to setting up a centrifuge
• Waste oil to black die...
First batch of black diesel ran through my wvodesigns centrifuge
• waste oil to black die...

[@mordicialuminous6792]

Great job! On my mud flaps I used, cut rubber welcome Matts to the right size. On my battery case I use a wooden built case, painted black, than found a thrift store plastic casing matted with left over welcome Matt inside and out for battery, left some Matt over hang, then bolted wood . Used the bolts& wood bolt inserts, from an old couch, that was on side of road.😆 Again thanks!!

[@worthshop]

I am all for repressing junk from the side of the road! Great job sounds good. Thanks for watching.

[@mordicialuminous6792]

@@worthshop Same with me, creating new purposes for what we see as thrown and discarded treasures. Imagination is one of God's greatest gifts to us through free will. When car parts are no more, men like us shall find ways to make sure he parts, even if we have to cast aluminum in sand for a part. Helping each other in ideas as one family. We only have each other, especially now days!😎

[@troyhager3467]

Fun to watch you having fun.

[@worthshop]

THANKS! Hope it encourages you to get out and have your own fun as well. I do this chanel to encourage people. Thanks for watching.

[@DirectCurrent4u]

Hay Aspie, The Race Truck is lookin good! Nice job on the Mud Flaps,Window Net, Hood Pins etc...Looking forward to what Your going to do next week! Keep up the good work and have a great Mothers Day and work week. 🙏🏻👍

[@worthshop]

Thanks! Really appreciate your involvement with the chanel. Other than racing, I am really looking forward to painting the truck. I think it will bring the project together and be the icing on the cake.

[@DirectCurrent4u]

@@worthshop I was thinking about the Paint myself. That is going to make a huge difference. Looking forward to the paint scheme. 👍

[@andrewmunchkin7212]

I'm working on my 90 idi fseries dually

[@worthshop]

Hope some of my videos are helping in that process. Good luck on your project, and God bless.

[@andrewmunchkin7212]

@@worthshop yes I do, and you have alot of great info on idi diesels. Have a great day 🌞

[@simpleman4224]

Looking good buddy! 👍👍👍👍🇺🇸🇺🇸🇺🇸🇺🇸🙏🙏🙏🙏

[@worthshop]

Thanks! Can't wait to swap tires and do paint.

[@o61000]

Enjoying your videos

[@worthshop]

Thanks for watching, appreciate the comment.

[@MansoyHumilde777]

I'll beat you with my bone stock ford f250 with an inline 6 any day lol.

[@worthshop]

Come on out to the track! More people the better. It is all about putting on a good show and raising $ to help the town. If I was really going for the fastest truck, I wouldn't have started with a idi diesel that's for sure...