7 PVC fishing HACKs you will use

[@thomshere]

***New subscriber here. Great video, thanks a lot! I'm all about saving money and the pride that comes with DIY!

[@FishinNStuff]

Thank you Sir , I'm going to be making another one about pvc soon , but I have a bunch of DIYs in general . I appreciate you taking the time to comment brother

[@JuanPerez-rn8mu]

Great ideas! Adapted your kayak light and made a light pole for night surf fishing.

[@FishinNStuff]

That's a great idea , one guy made one for camping

[@dalegrible5556]

@@FishinNStuff where is the link for your first underwater fishing light? thanks

[@FishinNStuff]

@@dalegrible5556 I've got 2 visits on that now kzbin.info/www/bejne/bKTHg6p4bNN0gLM

[@timschwarze4842]

I appreciate how you teach by telling us what you are going to do and then proceed to show us.

[@FishinNStuff]

Thank you Tom

[@marcwatkins6784]

These are all good. My favorite is the free standing rod holder. Because, when I finally sell my house and move into a cabin, I'll take it with me!

[@anglersnkayaks8430]

The rod rack is great, I really like your favorite # 7 - great night light and work light!!

[@FishinNStuff]

Thank you Sir, I appreciate that . That Nav light is awesome , watch the nav light video though, it makes it make more sense. I appreciate you taking the time to leave me a comment brother

[@darrellrichards2133]

Great job

[@paulejrlawson3278]

Thanks for having us in on your fun,,plans,and ideas. I cut a bunch of sand spikes,but didn’t know how to put the flair on them, But I do now. Keep up the good work Partner. Pablo

[@FishinNStuff]

Yes Sir , thank you for watching buddy

[@enduringpatriot]

I'm a PVC DIY fanatic. Two of my favorites was (1) a raised box (4x8) vegetable garden irrigation system, and (2) a bike rack for my truck bed. I will definitely be building the rod storage holder!

[@FishinNStuff]

I think you'll like the rod rack , it turned out pretty cool , thanks for commenting brother I appreciate it

[@colinguernseyguydunn639]

I love the new pvc rod holder you made

[@brianmena3able]

I have done all those diy! Your awesome brother keep them coming!

[@FishinNStuff]

Thank you brother

[@Jay-ud6jv]

Come across your videos looking for truck fishing rod holders. That was a awesome project. Come out fantastic. That got me watching all your videos.

[@FishinNStuff]

Thank you I appreciate it brother, yeah those truck rod racks can get a little expensive . I looked at em a few years ago and thought man its cheaper to just keep breaking rods lolol . I thought up that rack in the process. But sometimes ppl like simpler DIYs . I really appreciate you watching brother

[@richardstrouth2359]

My wife liked the rod rack the best. I like the light one and rod holder one to use as sand spikes on the beach.

[@precisionanglingYT]

Rod holder...Great idea! By far one of the best I’ve seen

[@FishinNStuff]

I appreciate thanks

[@donaldandireneyoung3089]

Man, that was stinkin' awesome! Thanks so much for sharing...I don't have as many of the tools you have but will do this a little at a time. Have a blessed one...

[@FishinNStuff]

Thank you buddy , and thanks for watching and taking the time to comment

[@sams5155]

Keep up with all your ideas and thank you sir because you make it easier to actually try doing stuff on your own and learn new ways of doing things instead of buying them. Basically what I’m saying your doing good things and well explaining your ideas to us dummies lol.

[@FishinNStuff]

Thank you brother , you ain't no dummy . There's plenty of stuff I can't do . I just love making stuff , and anything you doi a lot your going to improve st . You just got to try . M an I sure do appreciate your comment buddy that was awful nice of you to say and I appreciate you watching too

[@billmansfield7369]

Great Fish N Stuff, I just made the rod holder, and screwed together with small ss screws for later expansion and even flared the tubes. All your videos and diy hacks are awesome. Thanks for the inspiration to be creative

[@FishinNStuff]

Thank you for your inspiration as well and I appreciate you watching

[@michaelrogers4285]

Great video Keith ! I like ALL 7 ! This video shows why you’re the man 👍. Thank you for sharing, and hope you have a great week ahead my friend.

[@FishinNStuff]

Thank you brother, I appreciate you watching and I hope you have a great week as well buddy

[@dustinsmith5611]

By far the best DIY fishing project channel on KZbin. Well done as always

[@FishinNStuff]

Man that means allot you saying that , it's only the best because you guys watch my videos or it wouldn't even get seen

[@deltapromasterlauj4848]

Yo Fishin N Stuff, you uploaded the video last week and 1 week later it’s gotten over 183,000+ views with only 15k subscribers.............less get this man some more subscribers please!!!!!!! Thank you sir for these awesome diy pvc fishing projects!!!!!

[@FishinNStuff]

That means a lot too me brother, yeah that video did good . Ive actually gained 7k subscibers because of that video lol . Im just happy the channels starting ti grow some , I appreciate you brother

[@GulfSoftwash]

Boy that rod rack is the cats meow. About to make one for all my Talicas and Saragossa reels for offshore. That nav light is slick too. Keep it in the bay boat and stick in the leaning post rod holder with a small battery.

[@greglittle404]

pvc rod rack is walmart worthy for sure! Good stuff!

[@FishinNStuff]

Thank you Sir

[@kaleoariola]

Great ideas. Mahalo for sharing. For the pole holder just use the long bolt with a wing nut and you can fold it up when you're done fishing.

[@garyvee6023]

Looove that rod rack.., project for this weekend. Big thumbs up. :)

[@FishinNStuff]

Heck yeah , a fellow Fabricator lol . Thanks for watching and leaving me some feedback brother I appreciate that

[@sreenayvonne]

I love DIY and my husband loves fishing. Next summer we are going to be ready with these awesome projects!!

[@FishinNStuff]

Thank you very much and thank you so much for watching I appreciate it and thank you for taking the time to leave a comment, I love hearing what ppl think .I think its awesome you guys are a great team . My wife fishes with me . Do you and your husband fish together?

[@bikmo7349]

Always wanted to build a simple rod rack, thanx man

[@FishinNStuff]

Yes Sir thank you

[@conroe2502]

New subscriber....Finally a channel that's DIY fishing stuff only....LOVE IT !!! 👍👍

[@FishinNStuff]

Thank you brother. Thank you for your awesome feedback

[@gr0uch02a]

These are TOO cool! Can't wait to watch more of your videos. Thanks!!!

[@FishinNStuff]

Thank you Sir

[@itguy19]

Great video !! Thanks!! I've been making the the catfish tubes for years! I love the other ideas especially the rod organizer !!

[@FishinNStuff]

Thank you Sir !! I appreciate you watching and thanks for the feedback brother . I figured a lot of ppl knew about the noodles but I just threw em in there for those ppl who didn't. The rod holder turned out pretty cool

[@robertbarnes7240]

This was/is the greatest thing since sliced bread!!!! I made one that holds 12 rods. I had to add some smaller PVC tubes to hold the top half of my two piece rods.... Too bad I can't send you some pictures!!! I really like watching your videos!!!

[@FishinNStuff]

That sounds awesome You can send me pictures , [e-mail]

[@freddy3070]

5:45 rod rack, just made one for the first time today and came out nice . Thanks for showing how to make one and save money.👍🏼

[@FishinNStuff]

That's awesome buddy thank you for watching sir

[@waynecarpenter3984]

Excellent video. Made the rod holder and most pleased with it.

[@FishinNStuff]

It's a great rod storage,,,,,I think lol

[@peaceandlove0317]

Thank you Thank you!!! This woman can use all of those!

[@FishinNStuff]

Thank you for watching

[@DSzajta]

New subscriber. Your DiY projects are very practical and you inspire confidence that they can be tackled on the cheap. Been looking for a rod organization system for a while and I just the together your PVC rack. It's working wonders! Thanks! Keep it coming

[@FishinNStuff]

Thank you so much for subscribing that means a lot , I'd you ever have ideas let me know

[@DSzajta]

@@FishinNStuff I do actually. Perhaps a variation of the PVC rod mount that could also be broken down quickly to take bank fishing with a C clip or something. It would also be cool to have a storage rack that held 4-8 rods that could easily and quickly attach to either a truck hitch or roof rack.

[@kavak1344]

#2 saved me and made me say, why didn't I think of that?! Lol thanks buddy! I had a old baseball glove laying around, so I cut the fingers off and put it at the bottom of the tube, the padding and leather is perfect for protecting the tip👌

[@FishinNStuff]

Thank you Sir, thanks for watching and for taking the time to leave a comment I appreciate it brother

[@gregbryant9673]

Great Video. I am going to make some of those underwater lights. Thank you for your time and knowledge.

[@FishinNStuff]

You will like it man , thank you for your time too . I appreciate you watching and taking the time too comment it means allot

[@Villachai]

Man I love your channel and all the products you’ve made! You’re my GEICO dude - you’re saving me a ton of money!

[@FishinNStuff]

Hahaha thank you for watching

[@guitargator17]

I had made a pvc rod holder similar to the one you made with one difference. I put wheels on it to move around easily. I used the wheels and inserts from an old bed frame. I drilled a hole in the 4 corners and hammered the plastic female piece in the hole. I then inserted the wheels and off it went. .. hope this helps. Love the channel. Also made your best nav light period. ..love that . Keep making stuff!

[@FishinNStuff]

Thank you brother I appreciate it , yeah I bet wheels finished that rodholder off nicely

[@greatlakeswoodworks5122]

These are super great ideas. definitely gonna build the rod holder. thanks for the great video!!

[@FishinNStuff]

Thanks for watching brother

[@darrylb4048]

Good job. I like the rod holder the best, I think I will do the same!! Good idea to use a rock in your 1st project as it will not add more lead to our waterways if lost etc.

[@FishinNStuff]

Thanks brother i appreciate that , and you taking your time too comment

[@lynkpaul2171]

Thanks for your cool, innovative and sometimes simple solutions to what we face as major problems but at times are too frustrated to come up with an easy fix.

[@bradhelton3500]

Hey man. I just made 25 of the fishing noodles! Per your specs, I got all the materials from Home Depot and Walmart, total cost $122.78. Less than $5 per noodle is a damn DEAL! Fishing them this weekend!! Thanks!

[@FishinNStuff]

I hope you catch a bigun

[@bradhelton3500]

@@FishinNStuff One question. Is the 3" piece of metal rod enough to make the noodle stand straight up? I saw one vid that the guy said he needed to put a little water in the tube as well to help it. But he used smaller rebar.... I'll do a little testing, but figured if you had any input it would help. Thanks so much! BTW, my dad and I made some of your "monster" rod holders (33degree) and they.....are.....awesome!!

[@FishinNStuff]

I'm not sure if it'll stand straight up , but if a fish is on it ,,,it will

[@jamyhawkins2982]

My 1st time watching your videos. Have to say I was really impressed. Thanks for the new ideas.

[@FishinNStuff]

Thank you brother and thanks for watching my videos. I appreciate you taking the time to leave a comment too

[@hendricks6760]

Love the light project!!

[@bpekhoul]

Sir, you are so creative with the PVC. This is an excellent and informative video you made. Thank you for sharing your awesome ideas.

[@FishinNStuff]

Thank you Sir , I appreciate you taking the time to leave such an excellent comment brother

[@Flow_intoflames]

A good fishing pole holder, if you want to mount it on the wall is just some PVC and a board. Saved me tons of room in my garage and didn't cost very much.

[@FishinNStuff]

I like this too . Ive made so many different kinds lol , its the ideas that interest me lol

[@buckeyecatfishing622]

Made the PVC rod holder just now, it works great. I spent $45 in material at Lowes. I added (2) 3/4" in the back for my boat camera/light poles. I don't think gluing will be an issue with expansion. I think I'll get some wheels and make it mobile. Thanks.

[@FishinNStuff]

Mobile is an awesome idea brother 👍

[@DeltaRogueFishing]

Great videos! There's nothing better than saving a little cash and your content helps me do just that! Keep up the good work!

[@FishinNStuff]

Thank you brother

[@outdoorfreedom9778]

Pretty good surf fishing rod holder!!

[@FishinNStuff]

Yeah it's really light too . I liked it . Thank you for watching Brother

[@carnufiasfishing8444]

Brother you are the Man! All these DIY's to choose from. Can't decide which to make when i get the time. Thanks for sharing all your wonderful insights with us 👍👊🎣😎

[@FishinNStuff]

Thank you brother , you always got the best comments . You da man not me

[@richardwright8902]

Loved the pole holders. Gonna make some for all 20 of my poles

[@FishinNStuff]

It turned out pretty good , I would have made it bigger but ive got some more ideas I'l be working on soon lol I'm a Rod n Reel addict haha I've got a smaller building full of em . Trust me I get it lol

[@brettkoch8514]

I watch all of your videos. Love this channel!! Keep em coming sir !!

[@FishinNStuff]

Thank you brother

[@vinniesdayoff3968]

Most excellent projects there Keith. You wouldn't believe how hard it is to find end caps over here. We need us a Lowes!!

[@FishinNStuff]

Yes Sir everyone needs a Lowes . But I'll warn you they high lol

[@emmittm7]

Great DIY’s I used the rod rack and supersized it to make one that holds 32 rods.

[@kevinglancy6799]

I made the rod stand but i modified it a little. I made it to hold 9 rods. Front 3 i cut at 8 inches, middle 3 i cut at 10 inches and back 3 i cut at 12 inches. Turned out great.

[@robertseybold1818]

For a very cheap rod holder to store your rods in the garage, on the boat, or almost anywhere, buy some galvanized pipe hangers and install them along the edge of a ceiling two by ? in a row with another row of hangers on another two by an appropriate distance from the first row. For the butt end of the rod, I only fasten one end of each hanger so I can then put the tip end of the rod in the pipe hanger that is fastened on both sides and then the butt end then can be “snapped” in to the other hanger. I rapped the butt end Hanger with a few turns of elect tape for protection.

[@mikemiranda1154]

I kinda like the first one due to the distance off the floor. if your shop is like mine it gets kinda dirty between sweeps. Great vids keep them coming.

[@FishinNStuff]

Ol yeah I have to clean after every build cause I make a mess lol . And I agree the first ones my favorite too

[@ravenking1334]

I love your videos everything you make is just plain awesome! I have a good chunk of the things you've shown in my fishing gear closet just waiting to be used!

[@FishinNStuff]

Thank you very much

[@ericb.1476]

Yep I will be getting me so PVC n make tht rod rack..Thanks🙏🎣

[@michaeljohnston777]

I just found out about Fishin N Stuff and now it's my Favorite KZbin Channel! Great stuff! Thanks Brother!! :)

[@FishinNStuff]

Ol my you just made my day buddy lol . I appreciate you watching and leaving such an awesome comment

[@michaeljohnston777]

@@FishinNStuff no problem! I really mean it too!! I've got the day off work because I had my wisdom teeth pulled, so my Dad(he's retired) and me are watching all of you videos now. He really enjoys your videos too. Keep making them! Your channel and "Richard Gene The Fishing Machine" are my top 2 KZbinrs! But you're channel is our new Favorite, for sure!! Thanks for the reply Buddy!! :)

[@danielwood2134]

The rod rack great idea starting my tomorrow

[@FishinNStuff]

Thank you brother, i think you gonna like it

[@jenky1044]

I will subscribe and look at some more of your videos. These PVC DIY's were great, but that rod holder would cost about $25 just for the tees. PVC is pretty cheap but the joints, caps and couplers get expensive. Great show, thank you for sharing this with us.

[@FishinNStuff]

I appreciate buddy , and your exactly right the PVC joints are what cost ya . But ppl seem to like em . I like working with steel , but everyone doesn't have a welder . But over all its cheaper to work with if you buy used materials

[@cleanandshineautosales224]

Awesome projects mate. Thanks for taking the time to do this. On the rod holders you could make different lengths of tube in each row, like one row short the next a little bit longer, in case some of your rods are longer than others. Thanks Mike.

[@FishinNStuff]

Thank you Mike , your right you can redesign it any easy that suits your needs , I'm always saying it's about the idea , thank you for commenting brother

[@johnbooker8434]

What are the measurements and size of end caps, John

[@MissingLinkMTB]

The before and after on the rod rack, yeah, i need it. Thankfully i live close to Home Depot.

[@benberry703]

Another great DIY video, I will use some of those PVC’s for myself. Thanks for this great DIY and keep these DIY’s coming👍👍

[@FishinNStuff]

Thank you brother, I appreciate you watching. And the encouraging comments you always leave it means a lot to me

[@flslingmaker8612]

Gotta make myself on of those rod racks. Really like your channel and I visit often, now a subscriber too.

[@FishinNStuff]

Thank you Sir

[@mikecarp3383]

Great vid very good to watch your a clever man all the best from mike Australia I want to see more of your ideas thanks heaps

[@FishinNStuff]

Thank you Mate , I really do appreciate it my friend

[@terencegillespie6675]

Great vid. Definitely not boring.

[@FishinNStuff]

Thank you buddy , I try and make em interesting lol . I appreciate you taking the time to leave a comment brother

[@hagenohea]

Coolest and simplest builds. Great work, man!

[@FishinNStuff]

Thank you brother . I've got a few PVC DIYs on my Channel I appreciate it brother

[@ReelHazardous]

Those are really cool ideas! Definitely going to try some of these out. All about DIYs for fishing!

[@FishinNStuff]

Me too thanks

[@oscarram5000]

Another great video!! I built your nav light a while back. It's a great kayak light but I'm finding that I use it for a lot of other stuff too.... like camping out and surf fishing at Big Shell to using it as a camp light when we go hog hunting. Hell, I even put the battery in a back pack and strapped the pole to me when wade fishing at night. Great job. Keep em coming. 👍

[@FishinNStuff]

See note your the type of thinking person I'm like . When i watch a DIY I'm normally not thinking about exactly what they are intending to do with it . Im thinking about what i can do edith it lol . That's why i always say its about the idea not the DIY . And those are great ideas man . Me and i buddy used em to light up his boat one time for a KZbin video lol

[@jameslaw3740]

I use a eye bolt on my chum PVC pipe , works great . #3 I buy my PVC at Menard's, buy in bulk 10 pieces $1.22 and the elbows and tees at the re-store, three pieces of 1/2" pipe in Canada costs as much as the whole cost in the USA, its with the 3 hour drive. #5. We use 5 gallon pails with rod holders on the sides, they are good for ice fishing , load all your rods and tackle in one and bait minnows in another, also good for bank fishing in summer, and they double as a seat while fishing. Thanks for your multiple ideas of invention's, my brother in law makes rod holders with worm holders on one side of the bank rod holder and a beverage holder on the other and a flashlight eye hook on topside, I'll have to tell him about the led strips. Awesome winter projects, thanks 👍 👍 🇨🇦

[@FishinNStuff]

Man you got some great ideas buddy I can't believe I didn't think of the eye bolt in the chum tube , I didn't even think about it shopping. I made it and thought dang I can't even hook this thing to the rope lol then I came up with the paracord idea after looking around

[@jorgerivero9460]

Man those we're pretty cool projects I thought the light for the kayak was cool thanks for sharing tight lines man

[@FishinNStuff]

Thank you brother , the lights are both cool and tried and true . I appreciate you watching and commenting buddy

[@mikecha1957]

Awesome projects Keith. I might have to make that rod rack. Very cool buddy

[@FishinNStuff]

Mr Chavez thank you Sir . I think it would look really good filled up with BCF rods man , that would look awesome

[@guitarmanw4181]

great idea. im going to make one well done mate. cheers from New Zealand

[@FishinNStuff]

Cheers from America thank you for watching Sir

[@markjackson5240]

Thanks for the information. Things you never think about.

[@FishinNStuff]

Thank you brother , and thank you for taking the time to comment I appreciate it

[@skeetersaurus6249]

One of the most-brilliant things anyone ever showed me, was how to actually FORM PVC into what I needed. Get you a coleman stove, a 5-qt sauce pan (all stainless is best), a 50-lb bag of sand, a metal funnel, and the PVC you need to form...now, fill the sauce pan with sand and heat it on the coleman stove (outside the house). When the sand is hot, put the funnel in the end of the PVC tube (cap the other end), and pour the hot sand into the PVC tube...using welding gloves, form the tube like you want...it will bend like a cooked spaghetti noodle...you can make it bigger diameter by pushing it together, thinner by pulling it like taffy, bend it in any shape you want...you can even take a router bit and some pine shelving, and make forms ('S' forms, archery bow forms, whatever) and 'lay it in there' in the form...then just pour the sand out so the PVC can cool...it will re-harden in the shape you laid it up in... Stuff is like play-doh for adults!!! Make ANYTHING YOU WANT OR NEED, cheap!!!

[@skeetersaurus6249]

Oh, and don't use that thin stuff for this...use Schedule 40...still cheap, and whatever you make (chairs, fishing stuff, boat stuff, whatever) will last longer.

[@FishinNStuff]

That's a really good idea I saw ppl put bend it before by filing it with sand and putting it in the over , but I like your way better

[@danielcollins9850]

I like that last one a lot. New sub.

[@FishinNStuff]

Thank you brother. I like that last one too . I appreciate you commenting man

[@NedHanks]

I'm inspired and created a rod holder for my fishing wagon.

[@theshorefisherman1]

Good projects. I've used wood for rod holders, but like the durability of the PVC.

[@FishinNStuff]

Thank you Sir, and thanks for leaving a comment

[@marshallhurt8814]

Awesome video as always, very great product!Like rod hold,nicely done

[@FishinNStuff]

Thank you Mr Hurt

[@vinnyhowells8132]

Totally awesome tips, thank you for sharing, love the rod rest tidy,

[@FishinNStuff]

Thank you Sir, I appreciate it. I think 90% of ppl that commented like that rod rack . I appreciate you commenting brother

[@elcaminosoldier1]

Just built the light love it when I'm fishing from the surf in the middle of the night it's a good thing to leave on the beach so I know where the hell i parked and also great when handling a 20+ pound bass (I put a red light strip on it so the bite doesn't shut off veca7se of the bright white LED)

[@FishinNStuff]

The red strip is a great idea man

[@fossilcreekkennels1973]

Those are awesome ideas I’ve done a few of them myself thanks for sharing my new friend

[@FishinNStuff]

Thank you Sir and thanks for watching

[@psychonursehomestead9680]

Amazing my friend!! Truly amazing. My time in California is coming to a close. I have a place in the Ozarks that is ready to go. About 45 mins from Table Rock by Branson Mo. Cant wait to get there. Thanks for your help and videos Brother. God bless you my friend.

[@FishinNStuff]

You be safe brother and thank you Sir for watching my videos . I hope God blesses you too

[@larryfulmer]

there's some really good ideas to start with and build on. Thanks dude.

[@FishinNStuff]

Thank you Sir

[@fredwest5396]

Awesome creativity genius., thanks

[@FishinNStuff]

Thank you Fred I appreciate it

[@robcaponesoutdooradventure8286]

I love the rod holders, Boy I need to get building and stop slackin and yakin 😆

[@FishinNStuff]

Thank you brother , man I've been praying for you , I hope the lord blesses you above all measure

[@charlesleaf8272]

Rod rack was the tits. Nice!

[@tammyhembrow1278]

Hi there

[@tammyhembrow1278]

@@charlesleaf8272 hi there

[@tammyhembrow1278]

Am just wondering if we can get to know each other better than this, if you wouldn't mind

[@bigbearchaseme4352]

This guy is a freakin genius!

[@FishinNStuff]

Ol thanks man thanks mighty awesome of you to say

[@markb.1259]

Excellent projects... Thanks!!!

[@FishinNStuff]

Thanks brother .

[@g-rod5199]

I just discovered your channel and it is awesome, I definitely need me an organizing rod holder for sure! Great content!

[@arthurmedina6175]

I'm hook, this guy has great ideas.

[@billcoley8520]

I think the light for attracting bait is the best of these

[@FishinNStuff]

That one's a great DIY works really well man

[@conroe2502]

I wanna see you go on a actual fishing trip with the stuff you build, like your navigation light and crappie light any other stuff you've built that would be useful on a fishing trip.

[@FishinNStuff]

I might do that , I've built 10 of the Nav lights once the last 4 years they work great and the guy I made the rod Racks for loved em and he makes videos every week using em .

[@FishinNStuff]

I'll tru and do some tips on using em . My not a full time youtuber after working all week then working on KZbin I'm luck ti get time ti fifth here lately lol

[@FishinNStuff]

kzbin.info/www/bejne/qYGQi5WMm82No7c

[@joenoel5690]

For the chum basket use 3" perforated drain pipe. Cheap and predrilled. Works great!

[@michelebartholome7798]

Love you diy projects now that we have a house I can make a few rod holders ect

[@FishinNStuff]

Thank you

[@jamesleary1405]

Awesome ideas thank you for sharing and tightlines

[@FishinNStuff]

Thank you buddy I appreciate you watching and taking the time too comment

[@WildBillFlysRC]

Think i'm gonna copy that NAV light set up! with the switch to work just the rope light part... the top bulb will have a switch at the helm. Dang lighting can be expensive for boats! you can bet i'm making a rod holder as well, but i was thinking wood for that. Thanks for the DIY tips!

[@FishinNStuff]

Thanks great ideas man I just make the NAV light stay on because on a kayak I would hate for someone to forget to cut it on and get run over you know , but it would work get on a boat , you could even make it where you could change the bulb if needed , even though I've never had one to burn out . Im still sure the have a certain life expectancy. I appreciate you commenting brother

[@larrymlynch9608]

Great project ideas Guy ... Thanks for posting these! Another new subscriber!

[@FishinNStuff]

Yes Sir , I appreciate it brother, thank you for watching and for commenting. It means allot brother

[@Absolut3mayh3m]

Video suggestion for Keith (@Fishin N Stuff): What about a PVC wall mounted rod holder system? A lot of them on the market only hold a few rods and even few let you store more then a single rod per row, a 4x4 or 4x6 wall mount configuration would be a better use of the wall space then say a 1x4 or 1x6 wall mount system. Thanks for your awesome videos!!

[@FishinNStuff]

Thank you brother , thanks for watching and for the great idea buddy

[@chriswatson5730]

Keith (@Fishin N Stuff), I built a wall rod rack that Absolute MayheM maybe interested in. If you want several rows of rods, you simply that my drawing and buy wider wood. How do I submit a picture and drawing of it?

[@guitarmanw4181]

what a great idea, im going make one. cheers mate,

[@FishinNStuff]

Thank you Sir , I appreciate it my friend

[@mikeswave2]

Suggestion before you build the rod rack check your rod ends I have several that won't fit 1 1/4" due to a large knob on the end. I made part 1 1/4" and a back row of 1 1/2" pvc with a couple of reducers still have a surf rod that needs 2" but this worked

[@FishinNStuff]

Thank you brother i wasn't thinking I assumed lol and you know what assume means lol . I've had some big handled rods but I hit rid of most of em

[@keepitsimple257]

I’m a new subscriber and I want to thank you for your videos they are really helpful and good.

[@FishinNStuff]

Thank y you sho mitch , not just for commenting but for your support too