70 Years Old Anvil Restoration | Restoring Antique ANVIL

[@blrestoration1]

Thank you for 100k subscribers 😍😍😍🤩🤩

[@maxim_izhevsk]

Надо до милиона набрать, хороший реставратор, видно что с удовольствием делом занимаешься! Удачи!!!

[@chechel_l]

Поздравляем, брат, в пути к миллиону!

[@CJ_7519]

Keep on doin' your thing, man!

[@jordanmusick8982]

No problem

[@RESTORATIONOFSCRAPMETAL]

congratulations buddy

[@billfunk1219]

Turned out really nice! Looks like a lot of kids learned how to weld using that anvil!

[@johnthemainguy9059]

Great job! A couple of comments from an ex-blacksmith if you don't mind. One, the stump has to sit perfectly flat and the anvil has to sit perfectly flat on the stump. Two, I'd rather have a perfectly flat face on the anvil than a polished one. Keep up the good work, and buy some boots! 😁

[@o.sz.a.2128]

I saw a lot of times, that there is a chain in the anvil; lik in this case, can you tell me why?

[@johnthemainguy9059]

@@o.sz.a.2128 It stops the anvil from ringing. That noise can be very annoying after a few hours.

[@o.sz.a.2128]

@@johnthemainguy9059 thanks :)

[@normajeancaballero7959]

Awesome 👍😎👍😎👍😎👍 Nice Work 👏👏👏👏👏👏👏

[@KyznetcCrimeanBlacksmith]

Anvil from the USSR, I have two of these))

[@eddierodriguez419]

Wow that's simply beautiful.. looks VERY GOOD 👍🏼👍🏼

[@marcuscicero9587]

nice and stout, especially the horn. you prettied that up real nice

[@leegoldeneagle9003]

Very nice work nice to see it live again Lee

[@carlmcgee1623]

Am glad to see you are SICK enough to create such a work of art. GOOD JOB SIR !!!!!!!!!!!!!!!!!!!!!!!!!!!!

[@chriscyrus2983]

Excellent job guys that is really sweet

[@julienghanadan8311]

Great job on old anvil restoration antique bl restoration 🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰

[@DodgerGang]

NOT BAD FOR A ROOKY...... Got a lot to learn but you're getting there

[@davidens8204]

I loved the fact that you shielded our eyes from the welding flash but also surreptitiously advertised your brand in the process creative thinking like that will get you everywhere ..lol i will be back i subbed

[@davereeves1967]

Shielded our eyes? You can't be serious...

[@RESTORATIONOFSCRAPMETAL]

Cool project 👍 and beautiful result, like it 👍

[@jonathanhall7903]

I appreciate how you used different techniques to remove the rust.

[@thierrypasquet1503]

Voilà une belle restauration.👍

[@imjosephvasta]

Wonder how many grinding discs he went through

[@93derekmusic]

All those sparks with no gloves or sleeves dude is bold

[@meninoandrade9833]

Need to patch up some blue holes by welding need more finishing touches any how good work Some ages to be need more finishing Tnx for your video

[@torquemada6781]

nice work, but I think the anvil sits too low, it looks like you were bending over while hammering. And since the surface of the anvil isn´t smooth, I would prefer something like Hammerite as paint.

[@Cat-qc6vi]

Gut gemacht, Junge, gute Arbeit, um es aufrecht zu bekommen.

[@herrdeutschmann4602]

Well Done!

[@dannyarrowheadstalker3054]

A good bed of silicone would take a lot of the ring out of it. Nice find and restoration!

[@shedmanx3640]

Good job mate.

[@wokohedgehogs]

Superb restoration, image they conversations that have happened around that anvil since it was first made, would be interesting if it could talk 😊

[@Tatal.b]

Bem trabalhada 👍👍👍👏👏👏👏🇧🇷

[@ggdzanas5261]

More likes deserve such quality💕

[@VOLK_X5]

Красавчик, с меня подписка

[@jeremiahgray8483]

really good job on the restoration of that anvil

[@anthonykent7983]

A lot of work but we'll worth it. Thanks

[@Lorgrom]

How much weight was removed?

[@rosanapascoal7747]

Tank you from the Brazil

[@ricardogaraycochea1939]

Felicitaciones por el buen trabajo, 🇵🇪 rescataste del olvido una herramienta indispensable en un taller de herrería

[@dador1584]

Very good boy

[@dreaded360]

how much is iit worth now?

[@Rustam_Nakhushev]

Взяли хорошую наковальню, поиграли по ней сваркой, облили солёной водой, подержали неделю в сырости и пи@ец - восстановили они, дурить народ ума не надо

[@RandomEngineer]

Really Amazon Brother. Enjoyed alot. Congratulations on 100k. Best Wishes From Mister Family.

[@lightofthemoon5197]

Ковадло получилось супер👍

[@tinkeringtaylor3053]

amazing workmanship well done what was them sanding pads you were using 👍

[@lindawallace6750]

C O O L !

[@billmoffet1443]

That's a Russia cast steel anvil sold by harbor freight 20 years ago. Got three of them in trades over the years.

[@oneshotme]

If you put a rubberized caulking on the bottom of the anvil it it'll help stop the ringing

[@AliAli-zv5ot]

👌

[@Castleknight]

What's the chain for? Bling?

[@blrestoration1]

for tuning the sound of the anvil

[@Nunbawon]

Why would you put your logo over the spot welder?

[@tuanviet4882]

Cái đe vết thời gian rất đẹp - tự dưng làm hỏng và xấu đi Làm để đưa vào tủ bày à

[@jonathanhall7903]

I read that bar magnets stuck to the sides of the base middle and the underside of the base reduces vibration/ringing.

[@theforge4591]

looks like a possesed anvil to me..... they even put chain like those were put there to seal the demon inside. joking hahahhhaa great video man.

[@ДмитроДіденко-я1у]

Тебе нужно больше подходящего инструмента

[@darrinsibert282]

Should've spent more time on the base. Like making a new one. Putting a chain around in was good. One thing that you didn't do was secure the anvil to the stand

[@flowfarmer4916]

What does the chain do?

[@juansolo7709]

Al pintarlo la habéis cagado !!!! Con lo bello que es el acero reluciente

[@atanassotirov9466]

What is the chain for?

[@blrestoration1]

for tuning the sound of the anvil

[@hrenim]

От громкого звона магнит помогает.

[@mark109s]

I call that a clean up ! Not a restoration. Good job on saving that old anvil.

[@semihzirig]

A question. Why is it very often around an anvil either a large chain or a (motorcycle) chain or the same as here wrapped around and attached to the anvil? Is there a special reason for this? I would be happy if someone could help me in this regard and give the reason provided there is a reason ... I thank you in advance //////-///// Eine frage Und zwar warum wird sehr oft um einen Amboss entweder größe Kette bzw. wie hier eine (motorrad) Kette oder der gleichen um gewickelt und am Amboss befestigt ? Gibt es einen besonderen Grund für dies? Würde mich freuen wenn mir jemand diesbezüglich helfen könnte und den Grund nennen vorausgesetzt es gibt ein Grund... ich bedanke mich im voraus

[@kdkrueger112]

it adds to the overall mass of the anvil. The more mass the better absorption of the hammer blow. The ring and rebound of the hammer on the anvil means that energy is being sent back into the hammer rather than being placed fully into the anvil or the object that you are trying to forge. This is why many people attach an anvil to something like this video did. The reality with this video, is that they would benefit from using a rubberized caulk in addition, as it creates a better connection of the anvil to the other mass, and that rubberized material will also absorb the blow rather than sending it back up to the hammer.

[@semihzirig]

@@kdkrueger112 Thank you, my friend, for your clarification, it is informative and now I understand it too, since I never had to deal with this type of matter, that really interested why and why that with the heavy chain etc. again, thank you very much, it was nice of you enlighten me ... see you then

[@XAVIERANDREW]

para restauración se quedo corto le falta muchísimo trabajo de restauración sol sacaste el oxido y pintaste nada mas y todos los huecos del metal los tapaste con pintura no es buen trabajo

[@jurdull2290]

More subscribers ♥ ️ ♥ ️

[@robertgrell486]

👍

[@mauriziobertoglio9408]

$100? Lucky you

[@johnnyvoodoo666]

Silicone the anvil to the stump, it will take the ring out

[@bradleybettis6428]

You should’ve used a 7018 rod instead of that crappy 6011.

[@robertwilliams2623]

Why did you do all that work jest to pant it

[@videntetobar1945]

slay

[@Kurban199]

Где можно такой достать

[@sambasivaraorao8862]

Restoration is not satisfactory The top hammering portions edgeas are not been set right it is very bad

[@richardbryant7972]

100 dollars great find not in the US, Cost way more than that here

[@Chevelle_addict]

I picked one up for a hundred bucks a month ago.

[@BgushBour]

И похер, что дыра на плоскости

[@dachiulal]

1

[@ДмитрийОтинов-з9н]

🤪🤮

[@MeanJohnDean]

What is the chain for?

[@AlexPu74]

Цепь гасит звон при ударах об наковальню.

[@luismatteyr.3668]

What is the chain for?