8.1.4.7 Packet Tracer - Subnetting Scenario

[@frosty3083]

4 years later and still helping people, thanks a bunch!

[@TechAcad]

Glad it helped!

[@tttt-ny9gp]

You have really help me on my net105 this semester and thanks so much. God bless you.

[@cesarterrones5866]

If somebody did this exercise from zero and is not able to ping from PC3 to PC0, add the following command to Routers 1 and 2 each one: Router(2)#ip route 192.168.100.0 255.255.255.224 192.168.100.129 Router(2)#ip route 192.168.100.32 255.255.255.224 192.168.100.129 Router(1)#ip route 192.168.100.64 255.255.255.224 192.168.100.130 Router(1)#ip route 192.168.100.96 255.255.255.224 192.168.100.130 I had to learn that in a very hard way: investigating by myself...

[@JoYiSgUiTaR]

You have helped me so much this past semester, thank you very much

[@TechAcad]

Thank you so much my dear Friend for your great support...

[@pierremendoza520]

You are the best. Going step by step. Great teacher

[@TechAcad]

Thank you

[@tahersadeghi6773]

This is the heart of networking. You have defined it clearly. Thank you.

[@TechAcad]

So nice of you

[@baconga_]

Thank you so much for the help! This really helped me understand the lab

[@TechAcad]

Thank you so much my dear Friend for your great support...

[@ramsus6088]

All of your videos are really helpful, thank you so much for making these

[@TechAcad]

Glad you like them!

[@brindamourgallina84]

Thank you so much!!! I was struggling with the addressing scheme and you explained it

[@TechAcad]

Thank you so much.

[@CrazyCODGlitcher123]

You saved my whole life, thank you!

[@rainbowdash3059]

Great work as always. Thank you kind friend.

[@MrPeponee]

You are an angel. This really helped me a lot.

[@TechAcad]

Glad you like it!

[@raulmarquez6865]

you are amazing bro. you explain waht & why everything. im here just for do my homework but you help me to catch all the information

[@TechAcad]

Happy to hear that! And you can contact us any time!

[@Natasha-nb3er]

Thank you so much, your videos really help!♥️

[@TechAcad]

Glad you like them! And thanks for your great support my dear Friend...

[@samzhang5682]

Honestly, my uni assesement is up to you!

[@TechAcad]

Glsd to help. If you like to contact ourteam you can visit our Website...

[@denisesmith1120]

Thank you. This was very helpful!

[@WickWire1316]

@ 13:01 in the video you have default gateways listed in the column.. How on gods green earth did you get these numbers for the gateways??

[@diegoblin9090]

thnks for the use of the excel! helps a lot to visualize everything

[@TechAcad]

Glad you like it!

[@calin1980]

Excellent video for checking myself against.. 100% correct like every time ;) Many thanks!

[@TechAcad]

Thank you dear Friend

[@analiciacordova-franco5522]

I dont know who you are but i love you. Thank you.

[@TechAcad]

Thank you so much my dear Friend. ........

[@picodkhifi]

12:27 - Why do we end following IP with 66? Is it because of the Virtual lan? Pretty lost..

[@williesolomon614]

Very nice tutorial for it is like a laboratory teaching that makes us understand very well. Thanks for sharing.

[@TechAcad]

Glad it was helpful!

[@yaboychar9993]

Thank you. I really appreciate this!

[@TechAcad]

Thank you so much my dear Friend...

[@zari0077]

You know about vlan subnetting

[@doflamingo.jnewgate4906]

What do you mean * by 3 bits in 3:20* ?

[@Lukas-kr2vs]

merci frérot tu m as sauver mon devoir, mon année, ma vie

[@Pst.nancy.n7092]

Thamk u sir. U are an amazing teacher 😊

[@TechAcad]

So nice of you

[@laxmitamang7244]

Umm i am confused that how in step 3 you had filled the value like ip address ,subnetmask,default gateway for r1,r2,s1,s2,s3and pc1,pc2,pc3 and pc4

[@WickWire1316]

Yes how!!!

[@dimitarchristov2965]

Amazing, thank you for your time always helpful

[@TechAcad]

So nice of you

[@shahrulnizamzahari9170]

i want to ask, how do you get the bits borrowed as 3 bits?

[@TechAcad]

You can contact us any time for any assistance!

[@temysmael4708]

Thank you Sunny! You really broke down subnetting for me! I could not wrap my head around how Cisco academy explains it.

[@TechAcad]

Thank you so much my dear Friend for your great support...

[@jumb0_9]

How many bits must be borrowed to support the number of subnets in the topology table? i did not quite understand why its 3 :(

[@ILYSTAN]

You’re a life saver❤

[@QuirkCentral]

4:00 where did you get 3 bits from

[@sujithreddypatlolla2107]

we need five subnet masks as per the given topology ,so the min no of bits should be borrowed is 3 bits as it gives 2^3 combinations i.e 8 subnets where as borrowing only 2 bits from the network part will give u only 4 subnets which doesn't satisfy our need

[@GR-xc1hq]

@@sujithreddypatlolla2107 but where are they coming from? nothing changes except the amount of 0's after the .168

[@sadeqsadeq7128]

what about the serial connection between R1 and R2 in CLI

[@javiermancilla8902]

Do you have to set tup the S1 and S2,? because you didnt do it there, that's my question because I am doing something similar but with one router and 3 switches, but the same 192.168.100.0/24 same configuration

[@cicada_moth]

Well explained bro God bless you

[@TechAcad]

So nice of you

[@bigwatcherofthings]

Very helpful. Thank you so much.

[@TechAcad]

Glad it was helpful!

[@mr.mcloremcclure2522]

it would be 30 bits. 2 to the power of 5 minus 2. but thank you for your help on everything else.

[@expleriamos9686]

Hello, can you please explain to me (b) why we borrowed 3 bits? i don't get it

[@lasithadulshan7357]

need 25 ip address so 25 -> 32 = 2 power 5. So 8-5 = 3 bits

[@rich4629]

Thanks so much bro life saver

[@TechAcad]

Happy to help And thanks for your great support and sharing my dear friend....!!!

[@MimoDais]

I'm still lost in solving this table, I'm not good at it, how do I solve each box

[@TechAcad]

We explained it in the video!

[@laxmitamang7244]

Can you repeat the step 3 in detail such as assign the second usable Ip addresses to the switches and host.

[@bjorn6300]

lmao islington ho?

[@rokiedebian2692]

where u used R1>> S0/0/0 & R2>>S0/0/0 ip ?

[@naufaldbei4234]

If you set the last pc, are the rest of the PC automatically configured it self? I saw you configure the PC4, but you can ping PC1 even if you havent touch the configuration, im new to this, sorry if i am ignorant on this topic

[@TechAcad]

Hi dear Friend Thanks for your great support. Here Packet Tracer Activities are preconfigured with some basic configurations. We have to implement only the needed Concept.

[@danfromzr3289]

14:46 "So my girlfriends..." Excuse me? Well your lessons are so good I guess you could call us your girlfriend. ;)

[@TechAcad]

Thank you my dear Friend......

[@amosfeldman9454]

"dear friends"... lol come on

[@ivand1743]

Thank you very much, sir.

[@TechAcad]

So nice of you

[@Eboogie987]

How did you borrow the 3 bits from 25?

[@mertsahin1312]

We use /24, so that means we have to work with the last 8 bits. In these 8 bits we use this formula to know how much to borrow: amount of hosts + 2

[@hatmoney3340]

Great video.

[@TheElpajarolibre]

Thank you, how did you learn all of this?

[@TechAcad]

Glad you liked it!

[@valjasme18]

hi tech acad, is this the same in CCNA Exam? thanks

[@tatumsh9]

Yes, you need to know this well... Sadly

[@yilp]

I love you bro

[@elyasminehaddouche2099]

thank you ery match. Merci Beaucoup

[@TechAcad]

Thanks for your great support and sharing my dear friend...

[@vibe_verse-m8p]

send me this lab sheet

[@ahmeds4312]

Hello Sir, How do we know the ip address of PC1, PC2 and PC3 since config is locked in packet tracer.

[@TechAcad]

Hi Thank you my dear Friend for your great support. If we required PC ip address then they will give the addressing table along with the Activity. If they didn't give, we may need not to use it in that particular activity.

[@ahmeds4312]

@@TechAcad But how did you determine PC1 address as 192.168.100.30 ?

[@ahmeds4312]

Since PC1 configure is locked we cannot view the IP address. Is there any other way we can ping PC1 from Switch or Router to know the ip address ? Please.

[@Xgoldenxeyex]

@@ahmeds4312 I believe because it is the last usable host address on PC1's subnet. Most people use the first usable host address, but Cisco seems to like to use the last.

[@setharmstrong1942]

Thanks so much man

[@TechAcad]

Thank you my dear Friend for your great support...

[@paulmichaeldeluna4485]

Where can I download that file? Thank youuuu

[@TechAcad]

You can join our Telegram group to download all the files! And Thanks for your great support and sharing!

[@rockdrigockm]

Hi, hello i have been struggling with how to fill the adressing table, can anybody explained me?

[@ItsStribe]

same bro like wtf

[@ItsStribe]

I payed for a subscription on course hero just to fill out the shit

[@kashology]

@@ItsStribe bruh im literally going to do the same rn

[@ItsStribe]

@@kashology you in college?

[@kashology]

@@ItsStribe yep

[@zari0077]

Any one how helpnme in my project😑

[@TechAcad]

Hi Please contact our team using our website, we can help you...!!! Website link will get from our latest videos descriptions... And also we thank for your great support and sharing...!!!

[@zari0077]

Sir discription have no link

[@zari0077]

You have any gmail account

[@anonymous-wd2yw]

Please share link of file Please

[@wisamkhalid5663]

thanks very good

[@heriezekiya3797]

thanks bro you help me :)

[@intelnet4086]

thanks a lot

[@TechAcad]

Thank you

[@prathamarifqisyafitrah4950]

thanks mate

[@TechAcad]

Glad it helped

[@IAmHassasin]

thank you

[@jarrettdelarye8834]

gigabitorru

[@DEDEPLDEDE]

Done. Than you

[@TechAcad]

Glad it helped! And thanks for sharing us!

[@natachapilorge6151]

thank you!

[@desyrusvn]

thank you!!!

[@TechAcad]

You're welcome!

[@jin1st852]

thank you so much

[@TechAcad]

Thank you my dear Friend for your great support. .......

[@lasanbangpraxay7592]

Thank you

[@TechAcad]

You're welcome