$8000 Freshly Rebuilt Dirt Bike Won't Run

[@RealSuburbanCowboy]

Unless you are building a professional race machine, I can't see how you could spend $8000 on a rebuild and NOT have every internal part new. Whatever mechanic he used, he should not go to any more. Great job diagnosing this. When I saw the video title, the first thing that ran through my mind was "Check the valves". That should have been part of an $8000 rebuild. I am guessing there is still something wrong (ring gap, or valve seals). I think he basically got ripped off.

[@bmbott123]

8k would been spent on new one.

[@corporalclegg914]

yes. what in the Hell? for $8k, I’d expect to start it up, put it in gear, ride down to my mailbox, open my fresh shipment of stupid pills, crush up 4x the recommended dosage, snort half of it, freebase the rest from my mother’s crack pipe she’s used my entire life plus 5 months (I was 4 mo premature), put my 12 early voting ballots into the mailbox for J. Biden, ride down the hill, then hit top speed in an attempt to make it across the same river that I sunk it in last time I had it rebuilt for $8.2k. I paid an additional $200 to have my headlight fluid replaced with a clear-tinted gender neutral invisible solvent & non-binary filter. what did you guys do that day?

[@teddyf9438]

I don't understand... $9500 total on a 20 year old bike.... a brand new 250f is that price... and this thing is almost bone stock other than the tank.

[@dabears22]

was coming here to say the same thing.. 8k is pretty steep no?? i live in ny where is seems like everything is over priced and i wouldnt be dropping 8k on a 20 year old bike

[@WreckedRevival]

20+ years old is considered a classic in a lot of places and collectible if built to OEM/OEM+ standards, if not wanted by a collector who grew up riding the bike museums could potentially give a high value tax credit for the donation if not bought. Same reason you'd restore a vintage except parts are typically more available at OG costs the younger they are.

[@marksnow3395]

I'm not sure what I'm most impressed with, your knowledge or your patience. Always about 10 minutes into your videos I think if I were in your place I would be throwing stuff.

[@MoistPenguinz0Clips]

Literally bro , I tossed a box across the room over an oil change on a bayou 300 🤣🤣

[@eriklarson9137]

Right? I am proud that I can't control myself. Makes my life better.

[@jasonb6570]

@@eriklarson9137 who's proud?

[@louisavondart9178]

I tossed a screwdriver once. Went straight through the brand new speaker I was trying to install in my car. I'm sure I could never repeat that manouver in a thousand attempts.

[@onebigchevy16]

That fresh engine revving to the moon made me cry on the inside alittle bit lol

[@RonaldDaub-xi5jz]

Rev it up 256 times😂

[@RonaldDaub-xi5jz]

300$ bike. I guess he hates to hear something idling

[@notme1453]

@@RonaldDaub-xi5jzlmao😂😂😂

[@zyxiyzzz9638]

8grand??!!! At that point just go get a brand new bike off the showroom floor!

[@FkCriminalJoe]

8200 bucks for a 2023 250r , yeah this makes no sense whatsoever.

[@Wisconsin-boys]

He paid 3 for the bike and put more money into it decking it out 😅 he’s got a lot into it buddy

[@zyxiyzzz9638]

@@Wisconsin-boys who put that kind of money into an old bike when you can get a brand new one for 8 grand still don’t make sense?? At least get something that’s fuel injected carbed 4 strokes run like junk

[@Carta87Blanca]

🤦🏻‍♂️

[@christinalewis1526]

First bike and I understand it's your first bike and you want to put it up in the garage brand-new that's cool but if you're just going to go out and thrash

[@Freddie-pe9nz]

I grew up on minibikes right on up to everything in between even homemade projects. I love small engine repairs and a passion to ride anything with a wheel on it lol. But I give you my full attention while I enjoy watching you at work. Im 60 years ald now and I can't believe how far these dirt bikes have come like a new vehicle I can't keep up with the digital world stuff a sensor every 5 inches apart and I know that there's a good living doing that type of work. Just getting your name out there and plenty of repeat customers are the best word of the month is the best advertisement. Good luck with your adventure and stay safe your a very good at making sure people understand why you do the things you know first before you have to much invested into something that might be better for another day because you will come across that special part or piece to finsh a back burner project. Thank you again..

[@robsim4692]

My first guess was new Grips! People just underestimate the importance of new handlebar grips

[@louisavondart9178]

So true. Alongside the teflon wheel in the chain tensioner. Amazing how people miss that.

[@fabianatencio6634]

You my friend are an ACE mechanic!!!! Checking the cover just to, was something not a lot of people would do... cheers

[@guppylowerdelaware5239]

I am so addicted to this once you turn it on you can’t stop till it runs man I give you props mad respect 🫡

[@L5man]

Fantastic video. Logical sequence of test, test, test. I learned so much. I’m going to revive my Honda XR 650 R, and my KDX 220. I had no idea about mechanics or how to start but now that I’ve watched your videos I feel comfortable going into it. Thanks a million.

[@artlizarraga677]

Amazing how you corrected all the faults from a bad rebuilt very good in deed

[@VitruviunMan]

"Seems like he took his time on this bike" as he pulls off floppy ass seat cover held together with like 3 staples and two zipties. Haha

[@sunnyvale104]

Yeah whats with the zipties?

[@earl6969]

That was a pretty punk try at a seat cover for sure....

[@benspilker6866]

And the un-oiled air filter...

[@jasonb6570]

hahaha I had the exact same thought.

[@daver3057]

Those bars

[@brir2108]

I grew up from a very young age watching my dad work on bikes as was his job. Sadly he passed away 25 years ago but I find it so relaxing to watch this, must be taking me back to my childhood 😊

[@86ServiceTube]

Little tip to save you a ton of time and money next time. When diagnosing a no start and checking spark pay attention to whether it is a good consistent spark. If it appears to be a quick bright spark then disappear as this one does that is a tell tale sign of a stator/pickup coil shorted to ground. Should spark consistently on every other engine revolution. Also just checking stator with a meter would have also shown this.

[@chumps7974]

Stators! I hate when they go bad.

[@ShawnBlais]

Slavens has a neat method for testing spark, he cuts off the electrode, if the spark can't make the jump it's too weak: kzbin.info/www/bejne/imiZoZtsitygqMk

[@ryanshafer3228]

Nice work going through the diagnostic procedures. The tip below on not twisting throttle while kicking the 4-strokes is KEY!

[@aeroman5239]

He never learns.

[@michaelhenderson5428]

Sorry, I read this just after making a similar comment!

[@MidwestGuy1]

My four stroke bike will only start if I do twist the throttle so it may depend on the bike

[@RonaldDaub-xi5jz]

Only guy I ever knew that could heat up a throttle cable from the inside

[@louisavondart9178]

Kick with a closed throttle and give a 1/10th twist as your boot hits the lowest point. Always worked for me.

[@terryrich4285]

One thing I like to do at the beginning to separate if it's a fuel or a spark issue is have someone spray the air filter a little with brake cleaner whilst cranking it over, if it fires you know there's a good chance it's a fuel issue

[@josephhollifield660]

Yeah, i hit 'em with starting fluid 1st thing. You find out real quick where to start looking.

[@chumps7974]

​I do the same. If it fires and dies it's fuel. If it doesn't fire you have other problems

[@carlosnvegas2426]

Yep, side of the road test helped out w/ my truck. Fuel starvation is an easy troubleshoot

[@snakehunter1342]

That was my first thought too. You can also bridle the horse from behind.

[@jayjudd6518]

😮😮 This is my third time working on this series. Plenty time this holiday 2023 for some favorites. Joe’s skills are great. I’ve watched so many of these I need to refresh my favorites. 😊😊

[@christophervillarreal8565]

Ive owned these bikes for a long time and the last thing you want to do is crack the throttle open while kicking to get it started. the procedure is as follows. gas on, two full throttle pumps, and choke on and without giving it gas kick it from top dead center and it will fire every time.

[@danm2422]

He won’t listen, lots of people have tried to tell him this in the past, he even cracks the throttle on 2strokes. Not hating on him but he never listens lol

[@PaulHigginbothamSr]

@@danm2422 if he blipped the throttle like he does, on my old Kawasaki 500, you pulled the choke full on, no gas. It always started cold with three kicks. If you even touched the throttle it would NOT START.

[@PaulHigginbothamSr]

On my old Kawasaki you certainly never touched the throttle. You left it alone full choke and three kicks started every time. You learned that quick.

[@talonbergeron9761]

I thought the same thing. Only time you go wot when cranking is if it’s flooded to get more air into the cylinder. But I will say he gets them running every time good job.

[@shawnmares8580]

That's how the buy crabs with the electron carb no matter what if you ever had electronic Harvey with no it revs like that and that particular bike Brad's high anyways it's a fastrip so it sounds like he's rubbing it high but he's really not

[@donaldblakley6796]

Wow, that one was frustrating... even to watch lol. I knew that you would figure it out and not give up. I'm agee with that wire and the shavings in the stator causing a short . (Intermittent spark) keep up the good work. Can't wait for part 2:)

[@jlucier59]

All the cold revving on a first start of a new engine hurt my feelings lol

[@RexFixx]

Let the man do this

[@craigmorgan4676]

Yea hate that with a passion!🤔🙈🤔😫😮😫🤔

[@nrmvlogs5025]

I wanted to cry .

[@rvmonkey1669]

ESP with no oil clutch side

[@klatubaradanikto]

It’s a Honda. No worries.

[@metrobadger]

$8k for a bottom end and it didn’t run is crazy! For that kind of money that engine should be brand spanking new! Good job troubleshooting and cleaning up the previous guys trash!

[@colinhudson3723]

I know jack shit about bike mechanics but damn this is Hell of a fascinating. Been binge watching. I'm a steel / electric motor / electronics/ concrete guy but love learning.

[@weekender38]

A true master at work. When there are multiple causes for any problem, the trouble shooting difficulty goes through the roof. Seems as if you found several issues that were combining to cause the no start. JOB WELL DONE!

[@edlockrow6581]

Joe, This is such a great small engine dianogistic channel. You are such a hard-working, knowledgeable guy. I really look forward to your videos.

[@chasleask8533]

He's a good lad is he not ?

[@_WebersWorld]

Haha😂 hold her wide open only way to break her in !🎉

[@michaelmays9292]

The guys that are talking sht about his ways are the guys that can't even change a spark plug ,and when they try they over tighten it ,and strip the head out . The bikes with helicoils are the bikes guys like that owned

[@krotchlickmeugh627]

@@michaelmays9292 no. Most of us have been doing it for decades. I worked with race teams and trained in high comp 2 and 4 stroke racing. I criticize stupidity and gove constructive criticism. This muppet doesnt listen to a word anyone that has ever opened a service manual says. It shows.

[@logangriffith6065]

@@krotchlickmeugh627 when you’re a genius u don’t have too boss🤣

[@crowtubecrozier2857]

That's so awesome your helping a subscriber out! I'm sure he's paying for your time, but that makes sense. I'll tell you, if I ever get stuck, and can't figure the issue out, you would be my very first choice for help. Great job

[@EdwardMurray06]

There’s nothing wrong with putting money into a machine you love. I know exactly how this goes. He just lost patience with it and you rescued his investment. Nice job man.

[@louisavondart9178]

It wasn't an investment. He'll never get his money back.

[@AntiPattern328]

Very cool watching your troubleshooting skills... Definitely the hardest part... I went from being a bike/atv/snowmobile/car mechic into computer science after I grenaded an arm and wrist. Sooo crazy how troubleshooting skills translate across multiple platforms...... Troubleshooting is such an art and applies across multiple platforms!! Super cool watching and learning!

[@andrewgibson1991]

Great job man really good stuff love the diagnostics too bad people still get screwed with bad mechanics and dealers.. glad you were able to help him out

[@devilsadvocate1441]

IM more of a quad and side by side guy but these videos have made me want to get back into dirt bikes again. Great job as always Joe

[@crabbiboi5528]

Do it! I was a die hard sport quad guy my whole life 20 years. I just bought my first bike a 22 yz450f. I have been having a blast, it's actually fun to not be an expert again if that makes and sense.

[@fearlessgod6625]

Michael Sabo is the guy to watch for you.

[@rocklanddale8646]

DUDE DONT! JUST RUN AS HARD AS YOU CAN AND THEN JUMP STRAIGHT UP IN THE AIR AND FACE PLANT! THEN THINK ABOUT 2 WHEELS!

[@Evadingmoto]

Sxs suck

[@kennethbrewer1894]

Have the same bike with the same problem, I'll go over some of the stuff you've done that I haven't, I was hoping you'd do a video on one of these CRF 250's.

[@syitiger9072]

Did ya figure it out?

[@RyleyClaudin]

Yea did you figure it out? I have an 07 and I cannot get it to run after a rebuild.

[@toddschutz5371]

At first I thought, all that work and the SOB won't start. Good job as always. The owner knew who to take it to. Keep up the good work 👍

[@THatChevyguy91]

My buddy's dad has or still may have a 2004 crf250r . We all rode the hell out of it then he decided to do the 280 big bore kit. Kibble white vavles stage 3 hot cam. All the goodies. That bike was stupid fast . Fun bike .

[@warpigs4874]

Once I saw your spark test, I immediately thought electrical. Glad you ran through all the mechanical stuff too and fixed gap spacing and all

[@Ken-ej6xn]

Just enjoy the video everyone. Who cares what the guy spent. 🤷‍♂️ Joe, just wanted to say I’m a big fan of your tremendous troubleshooting skills. I’ve been watching your videos for 6 months or so and have learned a great deal from you. Cheers

[@troyoser5911]

Your videos gave me a lot of information I just picked up a Dr 350 1999. Not running your videos helped me get it running. Thanks

[@reweydewy]

Nice to see you got it running. When dealing with problems like this on any engine it's good to make one change or repair at a time. This way you know what works and what doesn't. Was it the valves or the carb or the stator. The not knowing makes it harder for the next project. If it can save you time that saves you money

[@zain142]

I was stumped watching you try to diagnose that bike I could feel the frustration lmao. Only thing I’d say is on 4 strokes no matter how hard it is to start you don’t wanna twist the throttle while kicking. Give it a few twists then kick it without twisting the throttle. Good work

[@brandonjones952]

Yup. It took me a while to figure that out. Kinda have to do a little starting sequence on these for them to start consistently

[@stevenshepard2381]

I used to own a crf 250 x and the trick to starting it was never twist the throttle when kicking it over or you were in for a hard start. Great diagnosis!

[@MMKnight_1]

I cant understand why Joe twists the throttle on a 4 stroke. It only works on 2 strokes.

[@slickricktheruler]

Absolutely correct. It has an accelerator pump. Twist the throttle 2 times before kicking pull choke and she should fire up first kick as long as everything else is in spec.

[@thewizardoftech5075]

@@slickricktheruler its to allow more air into it. you get a cylinder full of unburnt fuel, so in turn you open the throttle to get more air to mix with the fuel. like blowing on a fire. same way we open the choke. it just adds basically a little more choke. more air the better on startup. its just not good when its running because the fuel burns way to hot , and causes issues .not sure where people got the impression , that you never touch the throttle during startup . im assuming a reddit post ?

[@frankandmo]

Watching you diagnose and talk is through is therapeutic for me!!! Love it❤️

[@mattbrown3858]

Love the content. I'm learning a lot from them. Having a string on bad luck myself with a Chinese quad lol Redid the wiring and got new clutches, belt and starter clutch. was running for 3 mins before the timing chain jumped and bent the intake valve lol

[@richardsmith8700]

After watching these videos with Joe working on these four strokes I'm so glad that I wrote two-stroke since the seventies and still riding two strokes I love my husky 300 fuel injected 2-stroke

[@Aidans_Mx]

Just some advice those fourstokes have a hard time starting giving it that much throttle when you kick it most 250fs won’t start like that

[@kilonnune]

Yea, like almost all other motorcycles, I respect 2vintages Work and dedication but his habit of giving them throttle on startup is one thing I hate with passion.

[@Aidans_Mx]

@@kilonnune yes just the sound of the biker flooding out

[@jasonb6570]

@@kilonnune That and the constant blipping of the throttle once it starts drives me fucking insane. Let it idle ffs. Dude does that in every single video.

[@RonaldDaub-xi5jz]

​@@jasonb6570that's because she has the brain of a 3-year-old I don't care how much money he has to throw at this s***

[@the.way.123]

Dont try starting a four stroke like its a 2 stroke

[@danburque7555]

When doing valve adjustments I always go for the wide side of spec. More torque and easy starts hot.

[@4fiddy_a_aron]

Why is everyone freaking out about reving a bike when you break it in... that's how you're supposed to do it, anyone that's ever rebuilt an engine knows you need to vary the throttle when breaking in an engine apposed to keeping it steady. That's how you seat the rings

[@MM_in_Havasu]

Those CRF throwaway MX bikes all have issues like that. If compression is low, good luck getting it to light off. They have a piston that looks like an aluminum disc with 2 tabs on it to keep it from turning sideways in the bore, and it uses one compression ring and an oil control ring and that's it. Titanium intake valves only compound the problem as the faces get pounded out and clearance goes away, killing compression. We won't get into a less-than-1 quart oil capacity which only promotes grenade action. Bring back the 2-stroke MX bikes! Joe, you're a pro at this and you get stuff running when others give up! Thanks for a cool video!

[@tomstott1140]

This guy is a top mechanic and can fix anything but I did feel sorry for that bike being red-lined on first start up 😂

[@spencerjoness8825]

He had plenty R’s left before red line 😂. It’s all the two strokes lately he’s been going through.

[@Mr.M1STER]

If you tried that hard to get a bike to run, there is no way you are letting that sucker stop, trust me.

[@moretrash4you]

That was painful to watch but I guess it will benefit him in the long run when it needs a rebuild sooner 😂

[@ofnaguycarlwatts8602]

@@moretrash4you yeah I figured out that's how he thinks too!! You know what's worse than him doing. All the idiot's watching him and praising him for his ignorance Green grasshopper LMBO 😂😂😂😂!!

[@jimmyjones9085]

dude every bike this bike has is revved to the moon on cold start it breaks my heart.

[@robrobinette]

I really enjoy watching you, a very competent mechanic, troubleshoot. I've learned a lot of troubleshooting from you. Nice work.

[@theghostkx]

when you said "maybe its not getting fuel" i was like "because there isnt a Tank 😅

[@unknownusr2330]

right?

[@krp-xe3hw]

There is plenty of fuel in the float bowl guys. He clearly showed it during the beginning of the video. It'll run for a little while without the tank.

[@tbounds4812]

@@krp-xe3hw exactly

[@Jakedegaye]

😂

[@greathornedowl3644]

👏BRAVO, after much frustration you found it. 😱I would have guessed the dreaded electrical

[@rvmonkey1669]

For $1500 this bike was a perfect candidate for a CR 500 conversion

[@lucascady4992]

For Sure!! 🙂

[@jamiebroadstock4142]

My friend you are a magician. You could be a teacher for this stuff. I want to say thank you cause I feel like I am learning a bit each and every tear down you make. Thank you again. Cheers James

[@jeffroberts532]

Joe, you are an amazingly talented mechanic! But I must draw your attention to the very beginning of the video when you asked Vinny what the problem was and he went directly to the stator!!! Vinny knows! Is he on the payroll?

[@2vintage]

Hahaha he's probably going to be demanding pay from me soon

[@jamestaylor8860]

I saw that too

[@sunnyvale104]

@@2vintage Appearance fee's for sure

[@Jimsalos]

@@2vintage Vinny is a dirt bike problem sniffing dog

[@markward6076]

Total cost is still cheaper than a new one 😊 good job. I haven't even seen the end yet. 😎👍

[@riccochet704]

Those old CRF's were always a PITA to get running when cold.

[@creamcorn888]

hell yeah they were, had a 04 crf 450. usually bump started it in weather under 50f

[@mr.mullet6881]

@@creamcorn888 sounds like your jetting! My 05 450 starts 4st kick in 40 degree weather in the choke

[@creamcorn888]

@@mr.mullet6881 your probably right. I never took it in because I was 15 at the time and didn't have to nickels to rub together lol

[@riccochet704]

@@creamcorn888 Had an 08. When it was cold I used to tow it behind my truck to pop it off. When I say cold I mean the engine was cold. Didn't matter if it was 90f outside. Bitch wouldn't start no matter how many times you kicked it. Dealer wasn't much help either.

[@aydenrich262]

@@riccochet704 our 08 did the same thing

[@NH-Bill]

Amazing persistence and diagnostics! I can't believe you work that long on a bike while squating down... I'd be crippled after 1/2 hour!

[@Onwaxwings]

Ppl who are blown away by someone spending 8k on a clapped out dirt bike have never worked in the restoration business. Who care what a customer wants to spend. Its thier money, had a friend who, in 2005 restored a 1994 chevy 1500. Dropped 20k+ on this dumb ass basic plain truck. Literally just restored a bone stock 94 chevy. He was happy as fuck, nobody could tell him it was a dumb idea

I bought an 05 CRF 250 off the showroom floor for $5000 out the door due to it being last years model in 06. Once i redid the suspension to fit me it was the best handling motorcycle I have ever owned. I have had many. Wish I had never sold it.

[@videditorEB1]

Any chance of an update sometime? That thing never sounded like it was running very good and I’m sure a few of us are curious if it would actually make any power. Thanks.

[@BajaTravelerXR650R]

Joe you blip the throttle everytime you kick it. to much gas. Modern 4 strokes dont like to be flooded on start up. My 89' CR500 loves it. i lay it on its side until gas runs out of the over flow tube ensuringthe foat bowl is full. There's a starting routine for every bike that needs to be followed to make your life easy! I enjoy watching you diagnose procedures. You're very patient and determined. My dad always said "if you have to say the Fword you're doing something wrong". LOL

[@davidregan9872]

You are the man when it comes to fixing small motors!

[@ryanxf8725]

Love watching you troubleshoot this!

[@aubrey5939]

Once you see the zip tied on seat cover, it's easy to understand how 8k was spent on a 3k bike.

[@Zt3v3]

right?

[@jasonb6570]

Lol yup. "Everything he bought was top of the line" *pans around to the jank-ass cheap looking seat cover*

[@vpweber]

Nice job diagnosing and getting the problem solved. 👍 Man I felt your frustration along the way!

[@jayeddleston9486]

You should be a doctor with all them patients 👍. Awesome videos

[@RacerDude78]

I love how he squirts oil in the head and then is confused when the bike smokes LMAO! Love the videos man!! Keep pumping out good content

[@Greggg57]

Just how many times must you kick a bike engine over looking for spark and not seeing spark? 5 or 6 kicks should show you everything you need to know.

[@andrewmx2586]

I know this video is old but I still figured I’d comment some of my experience with Lectron carbs. I race hare scrambles on an 03 cr 250 that I have a Billetron on. Any Lectron is super finicky any air leak of vacuum leak will make them not send enough fuel into the combustion chamber. In my case my bike ran flawlessly until round 2 when I had to blow into the fuel lines in order to get the bike to fire up. Checking the carb and everything seemed fine, compression was fine. Everything seemed fine. I did not do a leak down test. I tore the motor down at the end of the season and both of my reed valve fingers had some decent size holes in them. This created enough of a vacuum loss to stop the right amount of fuel getting to the motor. Maybe in this case the rings not being seated maybe could have caused that. Idk just throwing out my two sense

[@corporalclegg914]

to those about to whine about the startup revving: know that he was nowhere near redlining. those that have actual experience with this specific 250 will tell you that he was in the bottom half of the rev spectrum the entire time, but it does jump from the middle to the top pretty dang quick. that’s why this era CRF250R was so good coming out of the corners & on Florida tracks. it’s a berm blaster, for sure. I had/kept this exact year/model bike & it’s big 450 brother for over 5 years. the 450 hurt me more than any other bike I crashed on course & I avoided it for nearly a year before we made up. I was wearing a stupid pressure suit because it seemed cooler than the type of gear that kept me safe for over 12 years of serious & circuit riding. that lesson was learned the hard way. I made it through, but blew the best season I ever had going. personally, I would’ve taken it a little easier on the startup; though, I wasn’t the one with a getting-sore right foot, burning quad muscles & hard-tried patience. nice work, Joe. those rings will probably come in well enough in a cycle or two. the Honda Bong Hit you were hearing was probably due to the clutch side being oilless. if you try a LDT again with the wet basket side full, it won’t sound like my college apartment with my roommates watching the new South Park (not that I wasn’t seated with them or reading a Bible alone upstairs) $830 for a carb for a non-circuit racer is pretty dang zealous. I had 4 sponsors, but would never…

[@g57462]

Vinny says another good job,you are thorough and efficient, 👍 good job 👏 👍 👌 🙌 😀

[@mrwhite834]

he’s going to have big smile on his face knowing his bike running now, well done bro 😎 your the best

[@joshstacy4497]

Have you ever heard of a gas rag? I use this method all the time to start engines with carb or no fuel issues. Will work on literally any engine and its so much better than ether.

[@111cube111]

Vinnie sniffed that the front brake line runs on the wrong side of the shock. 😅

[@tonyshortland8812]

(Just my experience) iwhen I check for a spark, I do it by turning ignition switch, off & on. You can can see the spark better than kicking the bike over and looking at the same time, and the whole bike is signaling about. My advice is to see if you can do this now, while you have no problems, rather than not know, when you've broke down on side of the road.. happy riding

[@twanospano5293]

Quit twisting the throttle when trying to start. That's why it's taking forever

[@wisecampmotorcycles8258]

He does that with every bike. People have been telling him for years.

[@owensbama1923]

And revving the piss out of a fresh rebuild as soon as it starts up.

[@twanospano5293]

@@owensbama1923 Dudes wild lol

[@larrycone8821]

That is true Honda's usually start best with a closed throttle.

[@stevenrix7277]

I really like how you troubleshoot these 2 strokes. Im learning a lot on this channel Thank you.

[@jaybosak2767]

this is a 4 stroke

[@Nighthawk1966]

Great great job on that one Joe ! Love the shim formulas and all ! You are definitely a pro at this stuff buddy !

[@halfnelson6115]

When we were kids my brother rebuilt the top end on his cr250. Could not get it started. We pulled it with a car up and down the street with the bike in gear. Finally got it fired up. After that it was fine and would kick start no problem.

[@slagdemon]

"Everything he bought is OEM". Takes off seat... "Look at all those aftermarket parts in there.."

[@johnrussell5180]

Awesome mechanic!! You make it look so easy. Keep up the excellent work.

[@chrismacomber9727]

Cool video brother keep up the good work

[@terrywillis5784]

Good job making it run. He will be proud to ride it now. I’m sure you made a new friend.

[@capeRCouple]

$8000 jesus he was taken for a ride with labor charges because a full engine rebuild will never cost that much,i had a 2002 and fully rebuilt it including bottom and top end for $3000 including the labor

[@arthurburger8415]

wow, I am thoroughly impressed with your persistence

[@thebigguy8306]

Love the channel. Great learning moments. Engine basics, same on a Honda 250cc or Cadillac 472ci. 😭I didn't know there would be math. If the garage was't fumigated before, it is now.

[@josephseibert4662]

The grooves is all that is alarming and yes new one for shure

[@clydejupiter2458]

Damn $8k, he could have bought a new bike for $1k more. Edit: forgot that’s not including purchase price. Could have bought a new fuel injected bike for what he’s got into it.

[@MrZack1497]

Or buy a used one for around $1k. $8k blows my mind for only a 250.

[@ryanw724]

That's what I thought 🤷🤦

[@chele-chele]

yeah he got cornholed on this deal...

[@M.TTT.]

I'm assuming that's due to labor charges, that's why smart men learn to fix things themselves - saves money and a good hobby. Plus can have way more toys for less

[@98wz]

8000 ? 😮 daaaaang in Kuwait you can buy a new one for 10000

[@Berm_Blaster]

Just started watching your videos. I noticed you do the exact same thing with the throttle when trying to start for the first time. You twist it a bunch with your whole hand then you twist it a bunch with your finger tips and then back to full hand twisting while looking down at the carb. Third video ive watched and you've done the same each time 😂😂

[@shawncordeiroTerraceBC]

really took his time as theres zip ties around the seat

[@2vintage]

He didn't have a staple gun. The rest of the bike looks like he really took his time.

[@thejakefromstatefarm6768]

I had one of these and i loved it. I had vavle problems with it all the time but when it ran it was a beast.

[@NOWWECAN]

He must have really liked the 2005’s.

[@ambikesandboards]

Before you take carb apart the easiest way to check if it's getting fuel is spray starting fluid into air intake. If you got spark and timing is correct it will fire off.

[@paulmurphy5964]

I always wonder why he doesn’t try starting fluid…

[@randellrounds7000]

I don't think somebody did a very good job of rebuilding the engine

[@VintageEngineRepairs]

Excellent methodical diagnosis, thanks for bringing us along!!

[@larrywarner9314]

Here's my question did he build the engine or did he have a shop do it ? If a shop did it they'd be fixing it until it runs

[@chuckfry1227]

My two XR650R’s don’t like any throttle when starting them. But I do have to give the throttle adjustment knob a turn or two when cold to get them to start. As it warms up and the revs start to climb I slowly turn the idle back down to normal. Then hang on they are a beast. Funest thing you can do with pants on. Not for the faint of heart crowd. 😂

[@c_capp2015]

I’m rebuilding a 2004 crf250r and i have about 1200 into it couldn’t imagine spending anymore then that 😂

[@brettsummer5070]

Judging by the work order I’d say they confused the idle screw with the fuel screw (2 1/2 turns on the fuel screw instead of the idle). Bummer for the owner but probably best you found that wiring for the pickup before it got eaten up

[@larrywarner9314]

How do you expect it to start with no gas tank ?

[@Haydenluptonbmx]

First thing to always check on any of these 04-09 is the valve clearances and the spark plug. I see he cheaped out on the spark plug and put in an incorrect standard plug, the correct plug is a NGK R04090B-8 Iridium. Over here in NZ these iridium plugs are $120 so people always put in the wrong $10 plugs and wonder why the dont start or run very well

[@martymcmannis6581]

That is ridiculous . A sparkplug makes a spark. Do you really believe that a super expensive plug will have a bunch more spark ? I remember when accell coils were stuck in cars thinking about more spark. They just eat up the points. Good grief you must be new cause if you watch his videos, when he is done with the bikes he works on they start one to two kicks. Why are you even here? Trying to sound smart needs work

[@backyardrestorations]

You’re overpaying lately dude

[@huugo8278]

not his bike

[@backyardrestorations]

@@huugo8278 well, still.

[@huugo8278]

@@backyardrestorations yeah

[@davidwright873]

I had an overheat problem on my bike that i was determined to figure out over paying some schlubb 145 and hour to fix...took me six monts in my spare time but man, was it worth it...Figuring it out is cool....one step at a time....