94-2002 Dodge Ram STUCK ON DEFROST , "FIXED"!!!

I've had this problem since I purchased this truck and could not find a video that could fix this problem, This hack will fix your problem and is FREE!!
This will work for any 94-2002 Dodge Ram 1500,2500,3500!!!! Make sure to like and subscribe!!!!!!!!!!

[@dylanhinch9114]

YES this is what i was looking for quick easy and now wonderful cold air on my face, fyi to anyone, i didnt even take anything apart can do it while its running i just wedge my craftsman utility knife in the gap to keep it pressed down and it works pretty good 👍

[@mightyjoebean]

DUDE, stick shift Cummins dually, nice~

[@doubledforge]

Thanks for the video! That's some old school ingenuity!

[@stevevick9946]

My vacuum line broke behind the dash this last week and I grabbed some new vacuum line and ran it in from the drivers side. Much easier and works as it should now

[@sethboggs3058]

My vac line broke off under the dash. I didn’t want to remove the dash because it’ll be in pieces. 30 seconds later with this. Might not be right but it work! Thank you

[@melissaramsey4864]

Hey thank you so much for the video you posted! This is exactly what was wrong with mine and i did the quick fix with the ziptie. Its hotter than hell out here in Dallas Texas and Ive been without the AC for months now

[@amanciosalas24]

Glad it helped!

[@kennethhuff7158]

Thanks a lot

[@chanchoalv8271]

By chance do yall know where to get the part cause mines just went out and Houston hot as hell rn

[@amanciosalas24]

It’s called Vaccum door actuator , you can get it at any parts store , eBay , or junkyard.

[@samwithaplan8412]

I tried this but it goes back up on its own I’m going to just try a new one and see from there

[@amanciosalas24]

If you set it just to blow thru the vents it should stay when you turn the a/c or heater on ?

[@trayanderson4620]

Mine stayed up too. But thats my problem. 99 24v thank you

[@jacobflorin600]

How did you disconnect it?

[@amanciosalas24]

Mine was already disconnected when I bought the truck , but I believe you can just unclip from the actuator