Undervolt your RTX 4090 in THE RIGHT WAY

Undervolt your RTX 4090 in THE RIGHT WAY - Tutorial

Рет қаралды 58,767

Күн бұрын

Пікірлер: 625

@PicBizzaro13 Жыл бұрын

I've never undervolted a card before and I was really worried about messing something up or worse my GPU but your video made this process SUPER easy. Thank you so much for the info man!

@ImWateringPSUs Жыл бұрын

I'm glad I could help! Thanks a lot for leaving some feedback!

@thori4788 Жыл бұрын

I agree, this is amazing!

@MnDogman Жыл бұрын

its near impossible to break your gpu undervolting and changing anything in msi afterburner

@AqepbxVondx 10 ай бұрын

It is. Straight to the point and no nonsense talking.

@loeken1 3 ай бұрын

Wow! Nearly a 10C drop in my thermals, and I notice no degradation in my gaming experience. Thanks!

@villarey.angelo 3 ай бұрын

Hey! I'm just leaving a comment 6 months after I've followed your video on my RTX 4090. Been working perfectly at low temperatures ever since. :)

@ImWateringPSUs 3 ай бұрын

That’s actually so nice! Thank you :)

@ResonanceInvalid 2 ай бұрын

@@ImWateringPSUs I just followed method 1 for my Asus TUF 4090 and hasn't gone over 60C degrees even while playing The First Descendant on 4k Ultrawide lol.

@APB_1 2 ай бұрын

Just did this on my card! Dropped from 75 c to 61 c in games with no noticeably performance loss. Took only 5 minutes. Fantastic job!!

@Liberteen666 Жыл бұрын

Thank you brother. I've applied your values and now I have stable frametime as a result. My card is pulling less power and it is still delivering the same performance as before. Great video! Liked & subbed!

@ImWateringPSUs Жыл бұрын

I’m really happy it was helpful! Thanks a lot for taking the time to write this! :)

@MicroWave233 Жыл бұрын

Hey man that's good to hear. Did you use the efficient or performance profile?

@Liberteen666 Жыл бұрын

@@MicroWave233 I'm using the efficient profile and still getting the same performance as before while drawing much less power.

@DavidPortillo-k1y Ай бұрын

Very helpful I have always used your videos to undervolted all of my gpus in the past I now have upgraded to 4090 founders edition and used this method to undervolt my gpu has dropped to 32-45 celsius playing call of duty in a cold room that sits at about 68 degrees thank you !

@Lostprophet0985 Жыл бұрын

Dude, you're amazing! Your power-save profile seems stable for my card and completely removed the frame-time spikes that I got when I just power-limited the card to 60%. And all this while using even less power! Thank you so much! Keep up this great work, I specifically appreciated the explanations at the end so that I now have a better grasp of why this is the best method. This video alone made me a subscriber, I'm so happy right now 🙂

@ImWateringPSUs Жыл бұрын

I’m really happy it was helpful! Thanks a lot for taking the time to write this! :)

@NTSBcarlos Жыл бұрын

This is it... you nailed it mate, big thanks to you! By this simple tweak my coil whine is reduced by almost 90%. My build is pure silence now with almost no loss in performance! God bless!

@ImWateringPSUs Жыл бұрын

I’m really happy it was helpful! Thanks a lot for taking the time to write this! :)

@kostistsiutras4373 10 ай бұрын

Gigabyte rtx 4090 Gaming OC and you NEVER hear coil whine again my dude.. 1 of the 3 cards with literally 0% coil whine

@NTSBcarlos 10 ай бұрын

it's possible, my 4090 msi gaming trio is whining but i reduced it@@kostistsiutras4373

@mintycoke9456 10 ай бұрын

@@kostistsiutras4373Gamerock Palit Omniblack

@muzimoyo2804 Жыл бұрын

My Palit 4080 Gamerock comes tomorrow BEEN waiting for it I'm excited, thanks for this video! Definitely going to try the undervolt

@ImWateringPSUs Жыл бұрын

I’m really happy for you my man! Let me know how it goes :)

@ianflanagan7827 9 ай бұрын

Excellent tutorial. I used method 1 and it has reduced the power consumption and lowered the temperature of my GPU without reducing any FPS. Keep up the good work. PS liked and subscribed.

@ImWateringPSUs 8 ай бұрын

Thanks a LOT! I’m glad I could help ;)

@fidelgames Жыл бұрын

Thank you for the tutorial. I will try out both of them and hopefully less heat gets dumped into my room.

@ImWateringPSUs Жыл бұрын

My pleasure! Do let me know how it goes :)

@Crazy09starkillor Жыл бұрын

Very concise and straight to the point, thank you, used this as a guide for my 4080

@ImWateringPSUs Жыл бұрын

I’m really happy it was helpful! Thanks a lot for taking the time to leave some feedback! :) I’ve got other tutorials on the channel and more coming, if you like the content consider subscribing as it REALLY helps me a lot!

@kakugo71 3 ай бұрын

It worked like a charm, 100 W less and only 4% smaller graphics score in 3DMark. Max temp 61 in a room with 29 deg temperature!

@hzalien001 11 ай бұрын

Keep in mind that different bins will have different voltage curves. My 4090 Strix has a really strange bin. At 900mv it can only manage 2500-ish clock speed, any higher it would crash, but the curve shoots up at 950mv and can clock to 2750. It also does 2950 at 1.05v stock voltage which is total madness. It appears that there are some bins that can do really high frequency at the higher voltages but sucks at undervolting. So the more reliable way to undervolt is to do +170 mhz on the whole curve (no matter what frequency you land at), and then pick a voltage you want to stick to and flaten the curve from there. I picked 950mv @2750 mhz, doing basically stock performance while drawing at most 380w in 3DMark Firestrike.

@pnajnaja2720 9 ай бұрын

could you share a screenshot of your settings? I did the same as you, but without adding 170mhz.

@Ace-ff3px 3 ай бұрын

⁠⁠⁠@@pnajnaja2720did you figure it out ? idk how to add 170mhz or what that even means so i just did everything in this video but with 2750mhz at 950mv

@imaviet408 Жыл бұрын

Thank you so much! This works like a charm. I’m playing on ultra settings with DLAA turned on at ~180w and 47degC

@ImWateringPSUs Жыл бұрын

I’m really happy it was helpful! Thanks a lot for taking the time to write this! :)

@SAFFY7411 9 ай бұрын

This is a great guide. I think you can take your undervolt videos on to the next level by testing the GPU performance in Fire Strike or something and then testing the undervolt, delivering both stock and UV power figures in watts for the average Joe to understand as well as the graphics scores to compare. Taking things even further would be how Bryan did it with FPS charts. But I definitely do think upping the info on these guides will give you a good audience because you test a good variety of hardware to begin with in a non complicated way.

@ImWateringPSUs 9 ай бұрын

Thanks a lot for the feedback, I’ll definitely try to improve them :)

@C4rl0s_ Жыл бұрын

Dude, you are amazing! Really! I never undervolt before, and on the same day, you helped me unvervolt my CPU (Ryzen 7 7700x) and my GPU (rtx 4090). I will show your videos to my friends, for sure! Greetings from Brazil

@ImWateringPSUs Жыл бұрын

I’m really happy it was helpful! Thanks a lot for taking the time to leave some feedback! :) I’ve also got a few build videos on the channel and more coming, if you like the content consider subscribing as it really helps me a lot!

@VRLunatic 5 ай бұрын

Really smooth and legit guide! Before undervolt (Heaven benchmark): 391.8 fps, 9869, minfps: 72, maxfps: 779.8. And then WITH undervolt (Heaven benchmark): 374 fps, 9422, minfps: 61.2, maxfps: 742.7. So overall, that is a substantial difference, so now I'm thinking how to boost that score to have nearly the same performance as before (Asus TUF OC 4090). UPDATE: I feel like Heaven is an archaic benchmark anyhow, so I instead ran VRMark. Stock 4090 settings gave a score of 17946. Undervolted settings (second half of your video) gave a score of 17,901. Performance is almost identical to stock, so I'm pleased with that, honestly. I suspect that Heaven benchmark is so old that it gives inconsistent results (at times).

@Paul_Wasson 6 ай бұрын

I've used this tutorial 3 times now (2 x reinstall windows) and it remains the most useful resource for RTX 4090 owners. THANK YOU!

@ImWateringPSUs 6 ай бұрын

I’m really happy it was helpful, thanks a lot for taking the time to comment, it made me very happy to know you’re coming back to it :) Consider subscribing if you wanna support the channel & for more tutorials!

@Sean-fs1sg 2 ай бұрын

Great tutorial! Just did this with my old 3070Ti but instead of 2600Mhz I went to 1850Mhz. Getting same FPS as before the undervolt but max temp is now 59C insted of 70C. Nice!

@andrewshortt1746 Жыл бұрын

thank you so much, i was a bit annoyed at how much power the 4090 was taking, but i was a bit scared to do this. youve explained it so simply and easy to follow, very happy with the results

@ImWateringPSUs Жыл бұрын

I’m really happy it was helpful! Thanks a lot for taking the time to write this! :) I’ve got other tutorials on the channel and more coming, if you like the content consider subscribing as it REALLY helps me a lot!

@poppyboiXCIX 9 ай бұрын

3:20 You can just press shift and then hit enter twice to flatten the right of the curve, no need to do the dragging it all down...just shift + click and drag, then hit enter twice.

@ImWateringPSUs 9 ай бұрын

Correct! Thanks for pointing it out :)

@poppyboiXCIX 9 ай бұрын

@@ImWateringPSUs Thanks for all your videos man they are super helpful.

@davefulford8890 4 ай бұрын

A fantastic video. Why can't all tutorials be this clear and simple...!

@nexxusty Жыл бұрын

Dude. I had NO idea you could flatten the curve beyond your desired clock speed. Honestly. Years of doing this and I didn't know. Lol thank you.

@ImWateringPSUs Жыл бұрын

Ahahaha glad the video could be helpful! :) Consider subscribing to support the channel & for more!

@nexxusty Жыл бұрын

@@ImWateringPSUs Done!

@JohnFinch-e9j Жыл бұрын

well done and good reasoning. been using this method since 3090. this is the correct way.

@ImWateringPSUs Жыл бұрын

Thanks a lot for the support! On the 4000 series it's essential in my opinion!

@ixoye56 9 ай бұрын

Great tutorial, a tip, you can fine tune the frequency scale with the up and down arrows while holding shift.

@ImWateringPSUs 9 ай бұрын

I’m really happy it was helpful! Thanks a lot for taking the time to leave some feedback :) Consider subscribing if you wanna support the channel! Thanks for the tip btw, I should point it out :)

@Pinedsauce 10 ай бұрын

This was absolutely amazing! Thank you so much, this dropped my Temps and power draw by a HUGE amount ( i havent checked the exact figures, but im seeing a roughly 6-7C) And this took me no time at all. Will be recommending to some friends aswell

@ImWateringPSUs 10 ай бұрын

Glad I could help my man, I truly have to thank you because there's nothing that matters more to me that someone who shares my video :)

@nhpv08 6 ай бұрын

Just found this video after fully building out my new pc a few weeks ago and have had a few growing pains. Got everything flowing smoothly until I started playing Destiny 2 again. the game would hard shut off my pc after about 5-10 minutes of playing. this is on a ryzen 7950x3d, rog strix x670e-e mobo, gigabyte 4090 oc with, 64gigs of trident z5 ram, and a corsair rm1200e psu. all the games i'd played i'd had no issue. heat was good. power draw was fine. until destiny. i found this video and followed your tutorial and i can say i haven't noticed a single performance issue and still holding around 250fps on destiny with max settings and zero crashes. appreciate the easy tutorial and explanation

@martywrx 8 ай бұрын

My friend, thankyou for the video, this worked perfectly. It also reduced my coil whine significantly. Subbed!

@ImWateringPSUs 8 ай бұрын

Glad I could help, thanks a lot for the sub!

@kmorness 11 ай бұрын

Be careful, if you start seeing texture artifacts (small rectangles of corrupt textures) which becomes pretty obvious when you see it in multiple different games, then these settings were triggering it for me. I reverted to stock and no longer any artifacts. I suspect Nvidia may have quietly adjusted the default curve to improve stability. Nearly RMA'd mine before I figured it out. While undervolted based on this video, I did not have any stability issues (no BSOD, no crashes)... just artifacts. Wasn't temperature related, would happen even after a cold boot (not sleep) after it was off all night.

@applebro9943 10 ай бұрын

this happend me too

@snuckles888 10 ай бұрын

you're not going to RMA your gpu just cause your seeing artifacts

@LOLZYLA 4 ай бұрын

oh my god man! i have an inno3d x3 OC 4090 that started getting a bit toasty (92 degree hotspot with 20 degree delta). I followed your performance setting and it works amazingly well! hotspot max is 82 degrees now and the GPU is super quiet... best part? there's maybe a 1-2 fps performance loss in the witcher 3 maxed out... this is insane.... Thank you so much for this tutorial and explanation!

@everope 9 ай бұрын

I've been doing this for years and it works great, you can also lock your frequency by pressing the L key by the way

@ImWateringPSUs 9 ай бұрын

100% agreed! Thanks a lot for commenting :)

@fourty9933 Жыл бұрын

thanks for the video brother , i had my 4070ti undervolted by your 4070ti undervolt tutorial but you used a different method to tweak the curve editor ( which was buggy for me atleast,after startup the curve would change slightly so the profile didnt make sense anymore) this method is way better good job

@ImWateringPSUs Жыл бұрын

I’m really happy it was helpful! Thanks a lot for taking the time to write this! :)

@MicroGUNterV2 8 ай бұрын

Thank you fella for your work :) worked like a charm, almost 30 percent drop in power consumption, sweet :) Good luck to you in everything you do! :)

@ImWateringPSUs 8 ай бұрын

I’m really happy it was helpful! Thanks a lot for taking the time to leave some feedback :) Consider subscribing if you wanna support the channel!

@PRINCE300990 Жыл бұрын

Ho seguito le tue indicazioni ed il risultato è fantastico, adesso la scheda video è silenziosa, più fresca e consuma meno con prestazioni praticamente uguali a prima. Sei stato estremamente utile, grazie.

@ImWateringPSUs Жыл бұрын

Mi fa davvero piacere! Se vuoi supportare il canale iscriviti :)

@LevelsForGuitar Жыл бұрын

I had the hardest time getting my 4090 liquid suprim x fans to follow the curve I set in Afterburner. The firmware in the 4090 would automatically spin fans at a much lower temp from what I assigned. With this undervolt the fans now behave the way I want. I'm still having trouble getting the fans to spin below 30% but at lest they kick in based on my set temps. Thanks!

@ImWateringPSUs Жыл бұрын

@RTJJstudios Жыл бұрын

Funny thing I actually had problems getting my fans to spin at all regardless of temperature on my 4090 suprim liquid x until I installed afterburer.

@Manu-sb2pi 2 ай бұрын

Excellent tutorial! I understood everything you said, but you didn't explain why you overclocked the memory clock (+1300 and +1200 respectively), I would appreciate if you could explain it. Thanks!

@Callesson93 Жыл бұрын

Finally someone who knows what they're talking about. Kinda embarrassing that Optimum and Der8auer both got this wrong.

@ImWateringPSUs Жыл бұрын

Ahahahah you’re way too kind! I think they were a bit too quick with their testing, but it’s not 100% their fault because much has changed compared to how we used to UV the previous gen! :)

@douglas5097 Ай бұрын

What a great video, thanks a lot! I also followed your step by step for the ryzen 7 7800x 3d and it's working well! About this video, my msi afterburner doesn't allow me to go over 100% power limit and I still don't understand why would I want to go over that. I actually don't want to spend too much energy.

@stateazure 7 сағат бұрын

I had the same issue, I can't push it over 100%, so I just left it there, not sure why others can seem to go past 100%..

@wiiinston17 8 ай бұрын

This is a great video! Thank you so much and side note, you genuinely look like a really nice person!

@ImWateringPSUs 8 ай бұрын

Ahahahaha you’re the one who seems like a really nice guy, since you took the time to write that :) I’m really happy it was helpful, I wish you a great day!

@mihaitudor5698 5 ай бұрын

Incredibly informative and answered all my questions, loved the video

@jgakpp Жыл бұрын

Thanks man! Just built a new monster gaming PC but having some issues with loud coil whine on the ASUS Strix 4090 OC. Undervolting using your guide did help but I'm hoping some burn in will decrease it even more, which some users report. Time will tell..Have a nice summer buddy :)

@ImWateringPSUs Жыл бұрын

I’m really happy it was helpful! Thanks a lot for taking the time to write this! :)

@AqepbxVondx 10 ай бұрын

I got the same card did you undervolt it even more ?

@michaelfrank5279 2 ай бұрын

I've never undervolted a card before also. Lol This video was great! I appreciate it. I look forward to watching others.

@OC.TINYYY Жыл бұрын

Good video, what knowledgeable people already knew. Glad you explained it to people who didnt know. Honestly disappointed he never updated the original video saying "dont undervolt". His recent content shows he doesnt take criticism the best when he's in the wrong. Like his recent mouse reviews. Kind of lost respect for him as a peer.

@ImWateringPSUs 11 ай бұрын

Thanks a lot for the kind words! I definitely agree, not making a part two was a mistake imho. I’m sure he had a lot on his mind but yay, I fundamentally agree

@TCPUDPATM 5 ай бұрын

Very helpful! 20% power drop with 2% performance loss.

@alkanomaly5264 Жыл бұрын

Great video. After watching this I noticed I was being way too conservative with my undervolt and vram oc

@ImWateringPSUs Жыл бұрын

I’m really happy it was helpful! Thanks a lot for taking the time to write this! :)

@AndyMac508 Жыл бұрын

My MSI 4090 comes in today. Thanks for the easy tutorial bro!

@ImWateringPSUs Жыл бұрын

My man! Let me know how it goes with the UV, glad you came here in advance :)

@poppys33d Жыл бұрын

My MSI 4090 crashes to desktop with these undervolt settings. Be warned.

@karimmourabitamari6540 Жыл бұрын

Mine does 900 mV 2450 MHz in ESO. I did not test beyond that but I think I could push 2500 MHz easy. But why. I put +1000 on memory and no issue. What is fun is that I won't need to push harder and when 5090 comes maybe I skip it or buy it.

@jwlafferty Жыл бұрын

That was helpful. Loved that this was 11 minutes long, simple, and covered everything I needed. Got a sub from me.

@jwlafferty Жыл бұрын

I wanted to add, I just ran Cyberpunk RT: Overdrive + Path tracing, DLSS OFF benchmark and I'm getting 1-1.5 fps gain over stock with your 975/2800 undervolt. I can also run my portable AC in the room with my 4090 while gaming on the same circuit without tripping the breaker now. A life saver.

@ImWateringPSUs Жыл бұрын

I’m really happy it was helpful! Thanks a lot for taking the time to write this! :)

@novacombatarts 8 ай бұрын

Love when people show it then explain. This is the way

@ImWateringPSUs 8 ай бұрын

:)) My man!

@catalinasixty 11 ай бұрын

Super straight forward and very informative video, no nonsense and straight to business. You deserve way more subs. Cheers!

@ImWateringPSUs 11 ай бұрын

You're way too kind my man, thankyou!

@michaeldolan9130 Жыл бұрын

Very helpful video! Subbed. the first undervolt reduced my 4090 power draw around 100w for about 5-10 fps thanks.

@ImWateringPSUs Жыл бұрын

Glad I could help, thanks a lot for the sub!

@ShufflerBluey 7 ай бұрын

Amazing tutorial! thanks!!! Quick question, im running a Gigabyte 4090 master edition. With your "performance" settings, im getting 2750mhz @ 975v with +1300 on the memory. I'm only hitting 55 degrees and the card is whisper quiet. I feel like the GPU has alot more head room. Do you recommend any other settings, or stick with these settings?

@passiono4 11 ай бұрын

Your The Man!!!! Helped me out a ton and got me the results I was looking for and more!!! 💪🏽😎👍🏽

@ImWateringPSUs 11 ай бұрын

@MrJoeTrocious Жыл бұрын

You just saved me from constantly sitting at 87c on my 4090, thanks man!

@ImWateringPSUs Жыл бұрын

Glad it was helpful and I really can’t thank you enough for the detailed feedback!

@gardenia1738 3 ай бұрын

Great key combinations brother. Before I was doing EVERY voltage point manually lol😂 Thanks man

@Treeck57 6 ай бұрын

I know I've already done this before, but when I had my 3080 Ti before upgraded to a 4090. I had two different UV profiles because the one is for games that use Ray tracing. I did research and found out that Nvidia GPU's RTX cores are very sensitive to the gpu voltage. If you set it a bit too low voltage and games would just simply crashed. Just be aware about that. So I set it slightly higher volt but still less than what factory voltage was used to be set and i tested a couple RTX games and it ran solid without crashing. But for raster games that don't have RTX. So I have a quite lower voltage but can clock at higher and it ran for hours no problem. Right now is I haven't UV my 4090 yet, but I had to watch your video because i can't remember what shortcut keys to make clocks go flat line. So thank you for showing me for that.

@ImWateringPSUs 6 ай бұрын

I’m really happy it was helpful, thanks a lot for taking the time to leave some feedback :) Consider subscribing if you wanna support the channel & for more tutorials!

@jemborg 7 ай бұрын

That was great mate, thank you so much. I've subscribed. Looking forward to trying this on my PNY 4090 XLR8 OC. Regards from Australia.

@ImWateringPSUs 7 ай бұрын

Thank you for watching and for the sub! :)

@Manny32V Жыл бұрын

i undervolted my 3080 years ago and now i undervolted my 4090. it makes the gaming experience much smoother even if peak fps is lowered by a percent or two.

@ImWateringPSUs Жыл бұрын

@emir_audio 8 ай бұрын

Thank you so much! This works very well. 5 degrees drop for only 5 FPS!

@ImWateringPSUs 7 ай бұрын

I’m really happy it was helpful, thanks a lot for taking the time to leave some feedback :) Consider subscribing if you wanna support the channel & for more tutorials!

@doczombiez 5 ай бұрын

Hello, I wanted say thanks for this guide. I subscribed, ain't going lie i'm not a huge computer guy when it comes to undervolting and overclocking. Main thing I wanted to do is decrease the temperature since it's summer and my pc feels like how it did in the xbox 360 console days a huge heat warmer that heats the whole room Do you have anymore tips that can push down temps more?

@eliadbb9634 Жыл бұрын

You deserve my sub, thanks for making good stuff like this and not copy/pasta like other "tubers"

@ImWateringPSUs Жыл бұрын

Glad I could help, thanks a lot, for real :)

@mrBytemare Жыл бұрын

Amazing thank you so much !!!!!!!!!!! Went down -8c and with no performance loss lol! Thanks !!!

@ImWateringPSUs Жыл бұрын

@eclipse1999able 21 күн бұрын

I love this channel im subbing your a great teacher

@liahfox5840 Жыл бұрын

Thanks, I'm very new to this stuff and you made it really easy to understand.

@ImWateringPSUs Жыл бұрын

@LiquidGene Жыл бұрын

Awesome job! thank you. Keeps up the great work with helping the pc/gaming community.

@ImWateringPSUs Жыл бұрын

Hey there, you way too kind, really :) I’ll keep the content coming and try to improve it!

@gwonzz 2 ай бұрын

I’m gonna do this most likely when I get my 4090 I undervolt all my cards thanks to you

@Alex-cz4ky 9 ай бұрын

Tyvm for this! 200W less power consumption. Great!

@ImWateringPSUs 9 ай бұрын

I’m really happy it was helpful! Thanks a lot for taking the time to leave some feedback :) Consider subscribing if you wanna support the channel!

@applemonkey7305 2 ай бұрын

great video man. now thinking if i should wait for 5080 or get a 4090 :D

@joby602 9 ай бұрын

Very nice clear video. But when you talk about optimum tech using the 'previous method' at about 8:27 and getting worse results, what method is that? I'm just curious because what you described in this video is what i've done for my 3080, though your way of moving the dots on the graph is a lot quicker.

@ImWateringPSUs 9 ай бұрын

Thank you! The previous method is what I also use in my tutorials on the channel for 3000 series cards. If you’ve done it on a 3080 it is perfectly fine :) But on RTX 4000 you need to do it the right way!

@louishoffmann4459 2 ай бұрын

I like your method. It works. I'm just running at 2910MHz-1500Mhz respectively. I do however run a super high airflow case...NAF/You are a genius:)

@louishoffmann4459 2 ай бұрын

with average effective clock 2840'ish

@Goryglory0209 Ай бұрын

Thanks I finally did this after 1.5 years of usage and the temps dropped 10 degrees. I dont see any FPS loss TBH

@pawswi4900 Жыл бұрын

Thank you for your work and sharing. I have Asus Rog Strix OC 4090 and setting 900/2600 solved the coil problem. In fact performance is also better than stock when it comes to coil.

@ImWateringPSUs Жыл бұрын

@NeverGiveUpz Жыл бұрын

I have this same card, what does 900/2600 mean mate?

@silfrido1768 6 ай бұрын

@@NeverGiveUpz 900mv running at a frequency of 2600mhz

@petersenpansen8658 Жыл бұрын

gracias :) always coming back, because I always forget how to move the curves ;) having profiles with 0.9 and 0.925 and clock speeds from 2600-2700 with nice temperatures and powerconsumption (don't need the performance profile yet with the 4090, before my 7800x3d will limit in my games). Fans are only at 30% while playing demanding MSFS. It is a pleasure! THX. btw. can I see the Palit GameRock OC? I have also the Palit. Which CPU are you using?

@ImWateringPSUs Жыл бұрын

@leokrato 10 ай бұрын

My PC was shutting down every time I apply high definition textures in Adobe Substance Painter and the reason was my RTX 4090 is getting up to 400w, too much for my power supply capacity. After this undervolt, my consumption is about 280W and the PC stoped to shutting down when use real time render. Thank you!

@ImWateringPSUs 9 ай бұрын

I’m really happy it was helpful! Thanks a lot for taking the time to leave some feedback :) Consider subscribing if you wanna support the channel!

@lucasvenarotti 9 ай бұрын

Hi! Great vid. I have a 4090 Zotac Amp Extreme Airo. Which settings would you recommend for undervolting it? Cheers from Argentina!

@ImWateringPSUs 9 ай бұрын

Exactly the same as the video :) All 4090s aside from liquid cooler ones are the same

@brianwilson594 Жыл бұрын

Thanks for the video. One issue however that I discovered the hard way. Going higher on ram speed is not necessarily better for FPS. Using your suggestions, I ran benchmarks in Timespy and the higher I went on memory, the LOWER my graphics score was each time. +1300mhz for example ended up offering worse performance than +1000mhz. This is apparently due to error correction that takes place on modern GPUs when ram is pushed too high. Many times, modern cards will keep running (not crash) at unstable memory speeds, but the performance suffers. Can you do a video on this topic? I think many people are not informed about it and would appreciate being shown how to find the “sweet spot” for memory OC.

@andremessado7659 Жыл бұрын

1. ECC is not enabled by default on Nvidia GPU's, you have to enable it through Nvidia control panel. 2. Every card is different. I can Max my GPU's memory (4090 AERO) to 2000+ and still not see degradation in performance but its not stable. I run +1700 stable and get the best gains at this OC. 3. It is general practice and mentioned in many overclocking vid's from years and years ago that you OC until you either a.) GPU starts becoming unstable or b.) you start loosing performance. Maybe he assumed most people would understand to look for this already and is why he didn't mention it.

@ImWateringPSUs 11 ай бұрын

Thanks for this comment. And thanks for the reply too! Yes I did assume people would double check with a benchmark, I’ll make a dedicated video about it!

@triple8284 Жыл бұрын

Great video right here, you are a genius in this field 🙌🙌❤❤

@ImWateringPSUs Жыл бұрын

You're way too kind my man, thanks a lot!

@BlazeBlevinspace 4 ай бұрын

Easy to follow tutorial thanks my friend got a new sub

@Mojardan 8 ай бұрын

Good tutorial. 925mv at 2650mhz memory clock default , lost around 60w to 80w power draw at 1440p. And max temperature. In cyberpunk 2.1 ray tracing on temp never passes 72.

@ImWateringPSUs 8 ай бұрын

I’m really happy it was helpful! Thanks a lot for taking the time to leave some feedback :) Consider subscribing if you wanna support the channel!

@yipman9021 Жыл бұрын

You're a hidden gem on KZbin!

@ImWateringPSUs Жыл бұрын

You’re way too kind, thanks a lot :)

@VALV3RD3 Жыл бұрын

Great video, thanks. Let me ask you, do you think I should undervolting my 4090 with lower values than you recommended? The 4090 msi faming trio seems to get only 2610 Mhz maximum core clock, so it wouldn't be a considerable undervolt with 2600 max, right?

@ImWateringPSUs Жыл бұрын

I'm glad I could help! I'd still recommend trying my values, but drop it to 2500Mhz if not stable!

@KingJerbear Жыл бұрын

Great guide. How will I know if 1300 is too much for the memory clock? Am I just looking for artifacting or other graphical errors in the benchmark? Seems perfect so far

@ImWateringPSUs Жыл бұрын

Glad it was helpful! To check if it’s not too much yes, you’re looking at artifacting but you also need to test is going from +800 to +1300 produces a performance increase. If it doesn’t, no need to put +1300 as it might be slightly unstable

@DizConnected 7 ай бұрын

I set 2750 in the curve editor and +1300 Mem as per your video and so far everything seems to be stable with my MSI RTX4090 Gaming X Trio with the Suprim X BIOS installed.

@ImWateringPSUs 6 ай бұрын

I’m really happy it was helpful, thanks a lot for taking the time to leave some feedback :) Consider subscribing if you wanna support the channel & for more tutorials

@tianyangxiao9837 Жыл бұрын

Thanks for the great sharing！Have a question that if we just do the undervolt without reducing the power target, to what extent of effect will it have on reducing the total power consumption?

@ImWateringPSUs Жыл бұрын

There’s no need to reduce the power target! Just need to undervolt really :)

@GirlNoNonsense Жыл бұрын

Great video, will try it out when my card arrives - much appreciated! Just one thing, it would have been even great to also see how much power was saved due to this methods and that it shows if the FPS stay the same/change

@ImWateringPSUs Жыл бұрын

I’m really happy you liked it! Make sure to leave some feedback after you tried it! :) I’ve also got a few build videos on the channel and more coming, if you like the content consider subscribing as it really helps me a lot! I generally do the testing on the build videos!

@TillTheLightTakesUs 7 ай бұрын

This is how I UVed my 4090, long long ago when it first came out, despite the idiots on youtube claiming not to undervolt their cards. And have been happy ever since. I was more aggressive though, I picked 865mV. The only reason I didn't go lower is, the card doesn't allow it. The thing idles at 0,875mV and slightly droops to 865

@ImWateringPSUs 7 ай бұрын

Ahahaha that was the best thing to do! Thanks a lot for watching and for commenting :)

@Ureel2 10 ай бұрын

Subbed and Notifications turned ON! Very well executed video! I appreciate your respect for viewers time and your awareness about similar videos about this subject. Being able to put yourself in your audience shoes is very good skill, although im not sure if specializing your channel in pc building tips is best approach - maybe its fine at the beginning to get some community but imo think about diversifying it at some point (games, Ai, anime/other shows, commentary, maybe organize some fun tech tournaments with your subs, idk). Unless its just a hobby of course; I say all that because there are at least 2 big channels about pc's - linus tech tips and gamers nexus and it will be tough to become the third one. I detect some max power limit on this one ;) but maybe you will prove me wrong

@ImWateringPSUs 8 ай бұрын

Thanks a LOT for the sub, for the feedback and for the advice! PC building is definitely a niche subject, but it’s my passion! I’ll definitely try to diversify as you say, it’s probably a good move business wise, but I can’t see myself stopping doing builds :)

@Varil92 4 ай бұрын

What's the percentage of performance drop with the first undervolt profile you showed compared to stock settings?

@Greatskeem Жыл бұрын

I just want to say your tutorials regarding undervolting are great, I just want to make sure about my RTX 4070 ti, the video you have on that card's undervolt is different, I follow this guide right? I ignore that one? Thanks again. I did -300 and then got .950 to 2750MHZ and 1000MHZ memory overclock per your guide and it is stable, this is the better method right?

@ImWateringPSUs Жыл бұрын

Thanks a lot! Yes this is the better method but for the 4070 Ti the other one is valid as well. On the RTX 4090 one NEEDS to use this method :) be sure to subscribe for more & to support the channel

@Greatskeem Жыл бұрын

@ImWateringPSUs I can't thank you enough man, I made sure to subscribe as you make this so easy unlike other videos which make it all so convoluted.

@robdog979 10 ай бұрын

Worked like a charm. Played Alan wake 2 at 4k high settings from 450 watts to 380 watts while keeping the same FPS using the performance undervolt method 2. Thanks the detailed guide! Question out of curiosity: How are you able to set your power limit up to 111? Mine is already maxed at 100 by default.

@ImWateringPSUs 10 ай бұрын

I’m really happy it was helpful! Thanks a lot for taking the time to leave some feedback :) Consider subscribing if you wanna support the channel! The maximum power limit offset achievable is card dependent :)

@euricoribeiro4643 Жыл бұрын

Is there a chance that you will do a undervolt vid for the 4080? And thank you so much for your guides!

@ImWateringPSUs Жыл бұрын

Hi there! I’ll definitely make it, I just need to get a 4080!

@applebro9943 10 ай бұрын

Few days undervolting fixed my coil whine this is a miracle

@ImWateringPSUs 10 ай бұрын

I’m really happy it was helpful! Thanks a lot for taking the time to leave some feedback :) Consider subscribing if you wanna support the channel!

@applebro9943 10 ай бұрын

@@ImWateringPSUs already subbed ;) thanks again 🙏🏼

@nandishpandish7964 8 ай бұрын

You Sir, are fantastically pedagogical in your explanations. Great work! Definately a sub from me.

@ImWateringPSUs 8 ай бұрын

Ahahahah now this is a serious compliment! Thanks a lot, really :)

@allenm9578 Жыл бұрын

Very informative! If my stock for 4090 is 2730mhz, is this the frequency I should target too at 975mv? Or lower still? Tested option 1, performance in 3dmark seems too low vs stock so am opting for option 2.

@ImWateringPSUs Жыл бұрын

@poppys33d Жыл бұрын

Thanks for the video. Unfortunately with these settings, I get crashing in Diablo 4. I had to disable these Afterburner settings as they simply don’t work stably for me with my MSI 4090 Gaming Trio. So your mileage may vary.

@nestormolina3512 Жыл бұрын

Same

@ImWateringPSUs Жыл бұрын

You need to lower your core clock by 100Mhz and you'll be golden! Please consider subscribing if this helped

@poppys33d Жыл бұрын

@@ImWateringPSUs Do you mean to set 900 to 2500 instead of 2600 as in your video? And then follow the rest of the instructions?

@MicroWave233 Жыл бұрын

Great video, im trying to decide which profile to choose I don't mind a small performance drop (maybe 5 fps) for lots of saved power consumption. Would you recommend the 90 mv undervolt for this case?

@ImWateringPSUs Жыл бұрын

Personally yes, I think the 900mV one would be the best for your usecase!

@Kahlert02 4 ай бұрын

Hey there again, thx for your response on my comment at the Undervolting 5950x tutorial. Now im again here i get today my MSI 4090 gaming x trio. I have to say great thanks again, first i decrease my temps on the 5950x nearly about 19 degrees and now ive set this monster of a card to your recommended 2600 and it stays about 2580 and i have to say the temps are about 53 at max and you cant feel the performance loss its stays up in the bench with around 240 and at other scenes at about 380-410. Great Work and many thanks from Germany =) you let my hardware live for few more years. Carry on youre doing great content!!! Update Downside is i cant run it with 900ma und 2600mhz at warthunder is the issue the +1000 memory clock or the other settings? maybe you have an idea =)

@Kahlert02 3 ай бұрын

Re-update your profile is really fine. My Gpu Core has to be reballed, thx to the DPD Football-Team -.- now it is and it works totally fine. Many thanks from germany =)

@Kahlert02 3 ай бұрын

Hey another Update 😂 i cant use the 0.900 mv Setting for warthunder it crashes after 1 hour ive set it to 0.950mv now it works

@Moerti84 Жыл бұрын

Hey! Thank you for this video! Im thinking about upgrading my built from a 3070TI to an MSI 4090. The only thing I was worried about, was the 450 watts since it seems to be quite a lot of power in the long run (power is expensive in europe :D ), and if my Corsair RM850x PSU will be good enough for it. What is the average max power that the card consumes after the undervolting? Thx for an answer and keep up the great work :)

@damonm3 Жыл бұрын

Should be under 400w and I’m using an hx750i and have even run cp2077 at 133% max power and with only a 3 to 1 cable and still was pulling around 550w on the gpu only. I didn’t run it this way for long as I like to keep card under the 70°c mark and under 60% fan speed. Asus tuf non oc. I haven’t tried this uc yet but I’d just try it and monitor the card power in Hwmonitor.. can crl alt out of some games with them still running full power. Also furmark works if it’s in windowed mode. Just play around and please don’t worry about power being too much for your psu. It’s plenty even if you’re running intel haha… but you shouldn’t run intel imo unless you know specifically why you need it. 95+ % of ppl should be running an x3d either the am4 or 5…

@ImWateringPSUs Жыл бұрын

Late answer but here I am! I can definitely confirm that the 850W Corsair unit would be plenty for an undervolted RTX 4090! It should draw a maximum of 300W with the 900mV option

@MxrkoPro Жыл бұрын

I hope with this it's going to improve my fps. Right now im doing 130fps on warzone with the 4090 and i913900f.🙏 And you will suggest to upgrade my cpu with the 13900k?

@ImWateringPSUs Жыл бұрын

It’s definitely gonna help! Yes getting a 13900K would help in Warzone

@laurent1512 Жыл бұрын

Thank you, i'm an Afterburner noob so i really needed someone to explain it loud and clear to me. I tested 30 mn of Alan Wake 2 at almost max setting and power consumption went from 350w to 260w with a barely noticeable hit in performance, which is great. I didn't even do the VRAM overclock because i was afraid it might damage it in the long term, are there any risks?

@ImWateringPSUs 11 ай бұрын