A Professional Grade Scanner at a Fraction of the Cost - OBD II and Dealer Software

So in this video we'll go over why you need an advance scanner in order to be able to fix modern cars. I will be doing a review of a professional grade scanner I bought recently, this scanner is capable of reading live data PIDS, Scanning different control modules like the PCM, TCM, SRS, ABS, PATS, HVAC, INSTRUMENT CLUSTER, and many more, it also is capable of bi directional or active controls, it can read codes from the modules it scans, it can also program Electronically Controlled Throttle Bodies, ECU's and TCM's and much more. If you have compatibility questions ask the seller through the link bellow.
Link to My Maxidas Scanner Used in The Video: amzn.to/2bXGDp4
Please consider supporting this channel: / ratchets
Please Consider Supporting My Channel at : / rnw
Facebook: / ratchets2015
Twitter: / ratchets15
Instagram: / ratchetsandwrenches
Here are some other video's you may find interesting:
Hand Tools for the DIY Mechanic: • Recommended Hand Tools...
How to Remove Scratches From Your Car: • How to Remove Scratche...
How to Restore Headlights: • Ultimate Guide on How ...
If this video helped you out please don't forget to subscribe, give it a thumbs up or if you are feeling generous leaving a tip by clicking the " i " button on the top right corner of the screen. Thank you very much for your support!
Disclaimer:
Due to factors beyond the control of Ratchetsand Wrenches, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. Ratchetsand Wrenches assumes no liability for any property or personal damage that may arise from doing a repair on your vehicle after watching any of my repair video's. Due to factors beyond the control of Ratchetsand Wrenches, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Again Any injury, damage or loss that may result from improper use of tools, equipment, or the information contained in this video is the sole responsibility of the user and not Ratchetsand Wrenches.

[@scottshepherd1365]

as a mechanic myself I just want to say this channel has been the most informative and useful that I've ever found. thanks for the work and time you put into this. keep it up

[@melvinjohnson7033]

Another smart guy who refuses to be ripped off by Snap-on.

[@andrewball8441]

Your one of my favorite internet techs - I ordered a scanner earlier today (MP808) and then was researching scanners tonight to verify my purchase, and found that you bought the same exact one lol.

[@eightysevenmoore]

Thanks mate! I've been circling the idea of purchasing the Autel Maxidas ds808. I know its pretty PCM capable but not too sure how TCM, BCM, and all the other modules capable. Everyone and their grandma makes a code reader that you can see live data on and so many people think thats all you need. Well what happens when your driver seat wont move backwards because there's a BCM control issue.

[@melvinjohnson7033]

Kudos to Ratchets and Wrenches for not allowing himself to be ripped off by Snap-On. Good video, good chanel.

[@Giblet535]

There's also the OpenXC project for those who prefer DIY CAN bus analyzers. You won't have access to vendor data with a DIY rig, but the proprietary systems don't provide much of that either unless you're an authorized dealership.

[@wyattoneable]

Nice run down on the machine. Too bad they couldn't send you one for your use and review. You have a deserving channel. Congratulations on the purchase. That's a big decision but despite some design limitations, (according to Eric at SMA and Paul at scannerdanner) a lot of professionals use this unit. Good luck with it and let us know how you like it after some use.

[@myRatchets]

There are flaws in every tool, in ways this is better than the $10,000 snap on, like coverage for programming control units, re'learns and key programming. and ways its inferior like the scope/multimeter/graphing capabilities. but at fraction of the cost of that thing. This is a fantastic choice, especially as a first scanner.

[@wyattoneable]

Awesome!

[@DIYAutoHomeschool]

I'll be honest, I'm really a Snap-On guy, BUT, I have been hearing a few really good things about the Autel Scanners. And, they actually help those of us who love Snap-On, because of how low priced they are, and the fact they have been developing more and more capabilities, they are pushing Snap-On and other major brands to bring their prices down or they will get to a point that almost no one will buy their scan tools when something with similar abilities is so low priced.

[@wolleysegap9740]

Are you still using the Maxi, or have you moved onto something new ? Let me know.

[@sk8allica1]

Yes @Ratches and Wrenches please let us know if we should still buy this or another

[@venomx4093]

I've been planning on buying this one for many reasons, but my main reason is for my F150. I'm glad you demonstrated the Autel on the F150. I was curious on what it would do with this truck. Because of your review, I am now getting this Autel. Thanks!

[@venomx4093]

So, I ended up buying the Autel MaxiSys MS906. It is faster and Android based. So far, I love it, especially the bi-directional controls.

[@FR-ji3hw]

I like how you enjoyed geeking out on your new toy bro.

[@gordonbryan8367]

Good news I'm very impressed and I'm in the market to purchase a new scan tool. I'm going to purchase the one you demonstrated for my business. Its in great demand ,thanks again

[@WorldMechanics]

We have been using m908p with the programming device and it is amazing. We work on imports mostly, tried it on domestic and it does great

[@D2004slt]

World Mechanic

[@gthegreat153]

Thanks for the review. This helped me decide on which scanner I should choose. Picked the ds808. I wanted to confirm that these have "active test".

[@R1fanatic112]

Great channel & keep up the good work. I purchased this scanner about 2 years ago. Great tool but can ne wonky. It dosnt re calibrate the air suspension on the S430 / S500 MB like it should "tried on several MB" or program keys for the 99-04 Discovery but surprisingly does as advertised for the most part for the $ spent. Mine has already paid for itself many X over.

[@eugeniocesareo6925]

Whatt's the name of the scanner and how much is the cost.other thing where can find that scanner?

[@jeffsheldon]

These are fun to hack. It's easy to mess with the boot sequence as it's using standard Window CE 5.0, which has also passed Microsoft's security death date. Internally, there are several com ports which you can tap with a TTL-to-USB cable and monitor console and add functionality. Ultimately, the software is the real key...one can easily reproduce the hardware using off-the-shelf Raspberry Pi hardware and use the Autel adapter kit. Edit: This hardware design is based on a Samsung platform which is well documented. One can also override the USB controller chip easily. They really didn't do much to lock this down and are selling these as a legacy design now that they have the more expensive MaxiSys out....and that's just a tablet running Android, their speciality software, and using USB devices.

[@111kipp]

Where exactly would you find this software? The price is alittle high and was wondering if I could use one of my raspberry pi's to make myself a scanner.

[@jeffsheldon]

@Jonathan: Finding software is the trick. Last I checked, there isn't an open source effort to make a diagnostics software suite. There are efforts at making hacking tools and software exists for diagnostics PIDs (OBD-II), but they're limited. I think a real key is for something to talk OEM vehicle-specific, provide an assortment of data specific to ECUs, and then marry that data to some sort of open field/repair manuals. That would get enough traction to become a serious effort. Diagnostics companies are making huge money off subscriptions and that could really upset the mom & pop shop sales demographic.

[@jeffsheldon]

以蔵岡田: Same here. I've been looking for one with a cracked screen, burned, etc. Anything where the data can be surgically pulled. Hard to come by.

[@jaguarpaw5]

Anyway you can upgrade the ram or something to speed it up?

[@israellopez2334]

Jeff Sheldon would it be possible to then reproduce this hardware onto a laptop?

[@uggadugga8070]

I was going to get one but found a Maxisys Mini (MS905) on Egay for just a couple hundred more than the Maxidas. Like Scotty K. says, you almost have to have one to work on cars these days. Even DIY'ers!

[@meti903]

how much does it cost to update it every year?

[@Clownsatthecemetery]

Will this device let you re program your cars computer to make small fuel trim adjustments at the click of a button? this looks like the stuff they use at the dealer. all i have are 200 dollar scanners that get you by on basic stuff.

[@dianasimmons3213]

Thank you for this video and all explanations.

[@ROSSYDAVIS]

You're a good KZbin mechanic bro.

[@TheDisgruntledMechanic]

Good review. hope to see it used in future videos.Have the exact same unit for about 2 years now. It does everything I need. I put a bigger SD card in it so I could download and have all updates for all cars on it just because I could. Have used it in a few of my videos. I would buy it again.

[@verajavi12]

got mine at harbor freight $750 on sale with %20 coupon.love it

[@ryantownsend7501]

harvey jackass the harbor freight one is the discontinued 708 model...

[@JJ-it4ni]

Thank you sir. Been looking for the right scan tool for a decent cost. This helped a lot. =D

[@theoldviking1562]

I hated mine. I thought i was getting a great deal because of how cheap they are. Mine quit working on me 3 times in the first 10 months i owned it. They did send brand new units each time but it took 2-3 weeks to get it which hurt since i'm a professional mechanic and need it daily. I also spent $900 on a update and got it back where they had removed half the software and i paid for the down grade. I was so pissed. The reason they removed so much software is because their getting their ass sued off for pirating software by several OEMS like Ford. You can tell its cheaply made when your holding it. It had so many holes in its software too which pissed me off. It said it could do certain tests and even list them but when you try to actually do them.....NOTHING. The wi-fi is a absolute joke. You can't go on-line with it to do anything other than download updates which take all day to do. Just a joke. Plus their customer service???? Which i used all the time with all the problems i had with it. Whats up? Come on can you hire anyone that speaks English?? And once i found out it was a Chinese based company stealing American patented products like every other damn company in China WELL...... %$#@ OFF!! Their new Autel model from what i hear ain't any better and i've heard their programmer has a very good chance of locking up any computer you want to program. I watched a fellow tech use the add on scope you can get for the new model. Being a scope junkie I have a very low opinion of the scope as well. Not worth getting at all. The scanner part is about the worst graphing scanner i've ever seen and the additional add on scope module is laughable. Don't waste your money on that as a $154.00 uscope would run circles around it. There's a lot of scanners and scopes out there to choose from don't waste your money on this Chinese piece of shit that pirates everyone's patented tools and breaks American and international laws at the expense of American companies and their employees.

[@geologic740]

Thanks for your input. I'm a retired mechanic who needs more than just a hobbyist tool. I want the more advanced graphing and multi system scanning available to work on my own cars. Unfortunately, I have very little experience with obd2 since I haven't worked on them enough to get familiar with. I understand the theory and functionality, but can't settle on a scope or scan tool that's thorough and affordable. It appears this scanner doesn't fit the bill either.

[@jeandufresne9225]

What scanner are you using now.

[@appleparts5365]

I have had an MS906 for about 2 years and that thing is awesome! No hardware issues at all. Purchased mine through NAPA when they had a sale. A few mechanics I work with swear by it. It's not a perfect tool but it is very powerful. You just gotta learn to deal with its shortcomings. That's why lots' of mechanics suggest you have more than one scan tool. 1) some bi directional controls don't work. 2) auto decode vin doesn't always work. - sometimes you gotta manually select the vehicle to get it to recognize different systems.

[@lifepresent3183]

Thanks man this point matters alot to some

[@patrickmorrissey2271]

I'm talking to you, Snap On.... Hahah! I love your videos, Sir.... Keep it up!!

[@kismofer1]

good video my friend ....I have a question if that scanner can bleed abs system module...if yes I will get it

[@ComoGrabarBodas]

Tool companies should send you free stuff to review it. Great vids man, keep it up!

[@andrewball8441]

This would corrupt the purity of his Channel. Long live zorp.

[@moshe2002]

that scanner will help you for sure thanks for sharing

[@bombardier3qtrlbpsi]

Thanks for the great info and your outlook on the scanner very helpful!!

[@chungaleta1234]

For the price, this one looks like a great tool. Great vid

[@themechanic6117]

I own this scanner but don't use it much, I'm interested in future videos to see what you can do with it .

[@tonyreyes3294]

Launch x431 pad v is the best way to go

[@ozzstars_cars]

Good info. I'm on the fence but i keep leaning towards the Autel 908. It does more and is faster but costs 3 times mroe. Decisions , decisions. Thanks for the video

[@Dewey-wz4ny]

Make sure you review it's capabilities, with Autel, price does not equal capability.

[@Andy-ue3dv]

Thanks for sharing. Appreciate your content. Always helpful!

[@anti0918]

Eric at South Main Auto's channel uses one of these, along with the more expensive Verus. He said the graphing capabilities are the weakest part of the Autel.

[@kbauer57]

he has the maxisys not the maxidas, this is the older scanner autel offers more in line with the launch autoboss and solus

[@myRatchets]

He has both, also a Snapon Verus and an OTC he likes all of them :)

[@dc5723]

He also uses a Launch X-431 Pad

[@TelosDextroza]

Who needs graphics?

[@trustyauto2738]

Not "graphics", graphing. PID graphing.

[@kingbolen_official]

Autel Win 2016 Launch Win 2019 Launch X431 Diagun IV and X431 V has the full bi directional control capability. A not bad scan tool for auto technician or mobile mechanic.

[@richardgilmore856]

great if you do cars, but I do diesel OTR tractor trailers. for someone who didn't know the material you did a great job!

[@MoneyMarcMes]

Nice Vid! Thanks for explaining the Autel. I was debating this scanner vs a Snap On Ethos. This is much cheaper. How much are updates though after 1 year?

[@jyhuh]

I've had this one for a while. Nice scanner, especially for the price but sooooo slow. I am upgrading to maxisys elite

[@hp11208]

$?

[@ppentertainment2351]

$798

[@Z14kt12timandjes1]

Great video. Do you still use this scanner or have you upgraded to something different now that it's several years later? Looking for a good bidirectional one that I can afford. Just not sure what to get.

[@leefhead1]

Although the Autel scanners are great, they are SLOW compared to a snapon scanner. I own neither, but ive heavily used both (as well at matco, and OTC) at shops that i have worked at.

[@YourLocalFireAlarmTech]

If you think Autel is slow, then go try that Zurich Scanner from HFT. It's PAINFULLY slow.

[@lsx_moe]

I have the ds708, nice diagnosis tool but I wish it could program body control modules and ecu's

[@noelnoel3973]

What is the price for that OBD 2 scanner

[@ZEUS-xt3dt]

For the 700 almost 800 dollars that’s great if you do mechanic everyday and that’s your job I bought the Blue Driver scanner for 99 dollars and works fine.

[@danielrutledge9788]

Just picked mine up so far so good.

[@bwagenberg]

How do you vent the exhaust in your garage?

[@tirzahjoy4454]

ok so would this be able to show which abs sensor is causing my vehicle speed sensor is not working?

[@leroyjohnson4973]

Hi which scan tool can you recommend for SCR ADBLUE reset?

[@vicentehenriquez6131]

hi, are you familiar with the autel 519 , it says it has mode 8 which can send commands to modules. what do you think of this one, thanks

[@robertanderson6850]

Hey.....Really great videos...lots of good information. Keep it up !!!Bob

[@kurtbennett1164]

I hope you respond please. I've tried two different cheaper scan tools that SAID it could but turned up they couldn't. Big hassle. Does this scan tool read CURRENT misfire live data? It would help too if it reads HISTORICAL misfire data also but CURRENT would be the biggest help! I have a 2002 Nissan that bumps at idle only (at least that I can feel) and only with a/c on. I've replaced the rear bank of coils and all plugs. I need to watch at idle which cylinder is intermittently misfiring so I can replace only that coil. Fords and Nissans are bad about when one coil fails, the others are not long behind but, I only replaced the rear bank coils because during the spark plug change, I found cylinder 5 had oil on the plug boot. I changed the valve cover assembly (gasket isn't seperate) and only the rear bank coils. I figured if one of the front coils goes out, its easy to replace those one by one. The coils cost upwards of 65 bucks apiece (my cost-ngk) but if I only need one, I only want to buy one. Desperately need current misfire or historical to help me figure this one out. If this scan tool does it, I'll get it! Please answer.

[@moonlighter6]

Awesome, great to check more expensive auction vehicles especially if you purchase regularly. The auctions I frequent allow you to spend time checking vehicles days before auctions. Only problem, if the seller isn't available they don't let you drive a vehicle off their lot.

[@raidernation1271]

By far the best on KZbin for my vw b5!!!!!!!

[@cooldude2245]

A lot of scanners don't read transmission codes. The old maxidAs I had read transmission codes.

[@bgregg55]

I'll bet launch will send a scan tool your way to review. Like to see your thoughts on the diagun.

[@noelvillafane7747]

hey master can i program honda immobilized keys whit this model

[@chi-townvenom3364]

if your on a budget this tool is not bad thanks for the review

[@t2pt554]

Will this scanner diagnose a 1996 benz S320 W140?

[@johndoe-zq1js]

Can it be used to replace new pcm and program them with vin, milage, and set register chip keys to pcm? Looking for something that can flash or program a new pcm that works and not a cheap gimmick.

[@marks7352]

which code reader could I use to be able to use this Nissan Adaptor Niss-1 EOBD - EAA0355L40A? My grandson got a 1994 Nissan pick up....Thanx and hope you can help me on this

[@jwagner1993]

.. I'm still stick with Launch systems.. but Autel it's became great too

[@thomasniner001]

Wish I had one -- congratulations!!!!

[@christopherbaza4655]

Thanks for the info just bought one

[@dc5723]

Awesome, hope you enjoy it.

[@joelabriola6289]

Hi, I did a Lt1 Camaro swap to a 1996 Impala ss. My tachometer is not reading correctly and a couple check engine lights are on but not effecting the performance of the car. I have true mechanical gauges installed. Any help would be appreciated. Thanks

[@justforetertaiment9266]

hi my car kia sephia 2000 shake when stop on gear D i cleaned the iac sensor and same problemes any ideas?

[@termides]

I have a 98 f150 and windows, wipers and dome lights work intermittent. I need advice.

[@blakebiltwell5]

Great info Will this reset “Adblue engine start remaining “ message. I have a 2014 Benz E250 bluetec

[@ED-ki9mm]

Do you have a name ? What do people call you ? How much wood can a woodchuck chuck ? Thanks for all your help. Signed, your do it your sulphur friend.

[@colinlyne1660]

fabulous video . especially love those on the audi many thanks colin

[@fieldsofomagh]

,,,Looking forward to real live diagnostics and plenty of white board demos !!

[@mechanicandskills7215]

does it have a ashtray ejection function ?

[@hassanbuttscanmaster3765]

I have launch x431 pro what you think this good , bad , average scanner ?

[@baxterdeberry3463]

so wait how far in does it go with the pats system? I have almost the same truck in the video (98 ford f150 4.6 rwd lariat) but the previous owners at one point I believed pulled the security system out of it

[@spelunkerd]

Wow, bidirectional control for less than $1000. I've seen remarks from people who aren't so happy (on other Autel models) with their inability to replace the battery, slow boot up, and the expectation of a short life span because of eclipsing technology and lack of support for old models. But Autel seems to be a leader in the price category, and all scanners require frequent updates with subscription fees on top. No wonder mechanics everywhere have a love hate relationship with generic scan tools.

[@Dewey-wz4ny]

Autel charges a lot for their lower level models that don't do squat. I just bought a DS808 Pro and it's going back because it dies not have any bi-directional capability - none. I wanted only to bleed my ABS. They have cheaper units that will do it, but somehow they think this unit is worth way more than one with bi-directional capabilities. Their pricing scheme just does make sense to me.

[@eddiet336]

Do you know if reads misfire counts by cylinder? Thank you, awesome video.

[@ronmahoney175]

Is it true that autel was sued and can no longer support or service their products! What does it cost to update?Is the graphing slow?

[@ukehfortune6943]

Hello good day. A fan from Nigeria, and sorry am typing this here but it base on fuel trims. Here is my question and hope you can help. I don't have a code yet but from my fuel trim, or LFTS bank 2 I have -17, mean am running rich. And I have this funny herd start during warm startup and a little misfire don't really know what my problem is. The funny part is no body here around me seem to know what is going on

[@kermit80526]

Are you testing a DS708 or DS808? The link is to an 808, but the boot up screen says 708.

[@robinbasdeo6464]

what is your take on the launch crp touch pro 229 car scanner ?

[@rafaelchuqui6553]

Hi, good thing you can explaing some of those things about the scanners! Question? what you thing about the Actron Cp9680 plus scanner, bcause some say in the from if the scanber say.....only....(SCANNER) and i have seen in the other ( ACANNER PLUS) but the same number? thank...u for you time.

[@dianasworldoffixingthings4090]

Mr. Ratchet, I love your videos. Do you work for somebody or do you have your own business and is that your garage? Thank you in advance.

[@TheDisgruntledMechanic]

OTC is dolling out their scantools for free it seems to me, for review to youtuber's. Maybe they will send you one.

[@myRatchets]

Hope they see this, that would be real nice.

[@Jgarcia4195]

Which model are you using right there I'm trying to get one but I don't know if I need to get the cheap one or the expensive one I'm a DIY mechanic work on the weekends what do you suggest

[@gordonbryan8367]

Great tool .is presently using p809 pro.where can I obtain more information on this tool

[@CrazyLegsFE]

Can this scanner do a cylinder balance test?

[@sgrunt2144]

NICE PITCH TO SNAP ON ! enjoy your informative video's

[@donwalker5855]

Will this scanner program keys and fobs?

[@xxxshivaxxx4179]

Thanks, does this work on all cars ?

[@gamerfoxz3304]

what do you think of the maxisys ms 906 bt scanner?

[@davidd8435]

I was wondering what the yearly updates will cost?

[@mindiseverything5036]

how much does the updates cost after the first year ends ?

[@Chris-sx3he]

Has this scanner worked as well as you'd hoped? How about an update?

[@MrBlue-ib7oi]

how much for a year subscription of updates? i know you get the first one for free. also, do you have to use the stylus or can you use your finger to select options?

[@DSMernyy]

So I wouldn't be able to use these on Porsche or Lamborghini?

[@pleaseentername.192]

Can this marry and divorce car componests for 2003 saab 9-3 9440 (ex. Ecu)

[@JZONE14U]

have you heard about Actron U-scan? after getting all in-app add-ons purchases and spending $99+ 35 + 17 for a total of $153 it seams to work the same way yours work. All I have to do is pair it using Bluetooth to my smart phone!

[@ppentertainment2351]

julio zepeda I have that same device and love it, however it will not do everything the Maxidas does. It does a lot though for the money. It graphs too.

[@jgeorges3061]

GOOD ONE great info hope in future you well show more on that. cheeers