A4RA Transaxle Rebuild [96-00 Honda Civic] Part 1 : Teardown

[@kellymcguire9424]

The link for the factory service manual is dead!!!

[@emik6269]

Are the lock up solenoid on top is that the same solenoid as the bottom 🤔

[@isaiahramirez9557]

Im currently trying to replace my case, my problem is the Gear selector you turn with the screwdriver , my gear selector thing doesnt have the notch to line up with the marking?

[@danielsagurosky]

Hello, I have a question: When disassembling the secondary valve body to do the maintenance (polishing of housings and stems in a b4ra) I found that to remove one of the valves (cpc) you have to remove a closing screw that the manual says " watch out: don't move. " The valve does not move well, it locks, so it would be necessary to make a polish. The manual clearly shows that the other four valves must be removed and does not show this.

[@ModdedMK5Jetta]

New link for manual?

[@sethc758]

Why would you use an impact to screw bolts back in that are to long for the hole without being through the solenoid plate?

[@w0lvez1]

Does the A4RA also have 2 Feed Pipe for the MainShaft in the cover like SLXA?

[@ronnin64]

great video friend , You know if this transmission fits into a b18 or b20 engine. I want to improve the engine of my civic and is the only one I have at hand, I really like this transmission and I do not want to replace it

[@gazayouth96]

Is this the same for M4RA D16y7 ej6

[@camoskill]

Great info bro.

[@MattsMotorz]

Thanks man!

[@xXRacer9000Xx]

holy crapo, i rebuilt a 4r70w aode it was waay simpler then this starwars fortress of gears

[@nojokeauto]

I’m parting out a 96 Honda Civic A4RA right now. Trans was shifting fine. any body need hard parts let me know. PM me..

[@jfelshaw]

That poor table

[@kellyt5056]

Did you go to school or hands on learning?

[@MattsMotorz]

hands on

[@MMMRCHPCTB]

that puddle of atf on the table bothers me...

[@ancientapparition1638]

lol its bleeding

[@sinanshepherd5385]

Great info bro