Where did you get that after market bushing for up top to get rid of that extra play
@joshuaboyell779 Жыл бұрын
Hello, appreciate the video. The AC dealer looked at me like I was stupid when I asked for this kit but I saw it here and on snowest. Do you have a part #?
@lazar_asain8310 ай бұрын
Hey I was just got this sled and one thing I have been seeing a lot is people handle bars adjusted up super high I have the exact same sled as you and was wondering how to get mine as high as yours when I release it and pull up it feels stuck
@mainetroutwhisperer6 жыл бұрын
Enjoy your videos. I have CA Pro skis as well and mine tended to hold a lot of water in them right were the bushings are the the bolts go through. When the snow melted if filled up like a swimming pool and would cause them to rust over time. I drilled 2 drain holes on the sides for drainage and now she’s mint.
@syxxes6 жыл бұрын
Yeah a lot of skis hold water. Usually you have to cut out the skaggs in a couple years when they need to get did.
@dcbillybob4 жыл бұрын
Good video. What tools do you use to unscrew the steering post nuts at thé bottom on top of the bracket ?
@kendallbange79802 жыл бұрын
So I looked up this part by the number and it has all the models listed that it works in but it doesn’t have the m800 listed. Mine is a 2013 m800 limited will it still work? Thanks in advance
@richardhlady19994 жыл бұрын
Going to tackle this. Is it a hard fix. You make it look easy. Can you get it from the top
@Gerry7o4 жыл бұрын
Solid video thanks for the help. Did you just order the 2707-496 kit or also 0607-991 bracket steering stop? I don’t see that angled piece coming with the kit but maybe I’m wrong?
@jesse.jsmall06522 жыл бұрын
I need this whole kit
@codjonesy26535 жыл бұрын
Great video but how do you get down to the motor like that
@syxxes5 жыл бұрын
Like taking off the hood?
@demonwolf21785 жыл бұрын
Thanks for posting, I have exact problem on my 10,000 mile 2012 turbo.. I think I did something stupid though, I welded the nut and bracket this weekend so now mine is gonna be a pain to fix properly.. any thoughts on my predicament?
@syxxes5 жыл бұрын
Depending on how easy it is to get that tack off, you might be better off just pulling out that whole steering post and bracket assembly as one piece and deal with it out of the machine- (if you can.)
@spirited1puppetmastered9173 жыл бұрын
Hey great vids guys!!! I was wondering if anyone has ever fixed the telescopic steering post by drilling a hole for a through bolt where the telescopic assembly goes over the actual steering post. just above where the round post changes into a hex post ( under the rubber boot) to fit the tele section on? That's where the play is on my machine
@deansikorski65966 жыл бұрын
Awesome video Matt. Very imformative. Quick question, an approx price on the steering bracket kit. Also with the new bracket and reinforcement piece, do you expect it to last longer?
@syxxes6 жыл бұрын
It comes as a kit which is nice. I think it was in the range of 40-50 bucks, so pretty cheap. I've seen a lot less failures with that reinforcement. Once that kit is installed, normally I never have to go in there again.
@qrothing3 жыл бұрын
Is there a good way to tell if this bracket is broken?
@syxxes3 жыл бұрын
Open up the steering boot and look
@Name-vg3fu6 жыл бұрын
Hey matt! I have a prob and wonder if you can help! I own a 2010 crossfire 8 and a known problem with the telescope handlebar is that you can move the handle bar side to side without steering. Some bars even break.. When you pull the handlebar to carve the telescope handle bar almost broke off. Do i need to change to a different handlebar that isnt telescope? Bad english??
@syxxes6 жыл бұрын
There is steering play in the post itself between the bar adjuster and the post. I'd check the post for cracks behind that exhaust shield firstly- it is common for them to break there. There is a conversation piece where you can put on a solid riser. Just trying to track that part down again.
@Name-vg3fu6 жыл бұрын
Syxxes Performance oh god thanks for the tip. Going to check it tomorrow
@trentpastir78354 жыл бұрын
I got a 16 m8000, hit a ice wall and bent something, bars are turned a few degrees to the right when the skis are straight. Would this bracket cause this also?
@syxxes4 жыл бұрын
You'll have to do an inspection and find out what's bent.
@trentpastir78354 жыл бұрын
Syxxes Performance I’ve pulled pulled it mostly apart, that bracket doesn’t look cracked, have you ever heard of the shaft twisting? I tried adjusting that little tie rod up top connecting the upper steer post to the lower steer rod, didn’t work. I’ll have to pull the turbo intake out of the way to have a better look. Thank you for the reply
@syxxes4 жыл бұрын
@@trentpastir7835 Good luck!
@Yammi19906 жыл бұрын
So the airbox doesn’t need to be pulled for this job?
@syxxes6 жыл бұрын
For sure it makes to easier to see what you are doing but it can be done without moving the airbox. I've done so many I just do it by feel!
@jr5133 жыл бұрын
What's the part number to those
@erickholm95636 жыл бұрын
Where did you buy the steering bracket kit from?
@syxxes6 жыл бұрын
Its an Arctic Cat part number. 2707-496
@kimolsson75636 жыл бұрын
What are you riding next season?
@syxxes6 жыл бұрын
I have a plan, not sure if I am going to go through with it this year or next.
@DanielHugh3s6 жыл бұрын
Mine broke recently. Where can i buy these?
@syxxes6 жыл бұрын
You can get this at any arctic cat dealer.
@danielkatairoak40156 жыл бұрын
Oftracing makes a billet steering post bushing! Great quality 👌
@syxxes6 жыл бұрын
Yeah, the cat ones wear out after a while. The lower post bushing works pretty well with a tighten, but it's good to have something aftermarket.
@mikaeljohannhenriksen55126 жыл бұрын
You aer best
@rigginnedrow89054 жыл бұрын
Made that look to easy what’s the trick??
@syxxes4 жыл бұрын
I've done probably 50 of em or more. That's what makes it look easy!
@rigginnedrow89054 жыл бұрын
I got it, 2 hours of clanging and banging 😂
@nah64306 жыл бұрын
I can't x40
@jr5133 жыл бұрын
Mine did yesterday
@mikaeljohannhenriksen55126 жыл бұрын
Vi har en arctic cat alph 2018
@tarivard2 жыл бұрын
The dumbass dealer welded the post nut on my sled so...if this bracket fails on my sled, I have a whole lot more work ahead of me including a new steering post. I would have used blue locktite on the nylock nut.
@syxxes2 жыл бұрын
I don't know what tech thought that was a great idea...
@pim123456785 жыл бұрын
Mine broke up exact same way. Even a bit worse.
@syxxes5 жыл бұрын
Yeah, it's pretty common. The upgrade kit fixes the issue.
@allensnook77602 жыл бұрын
Should make them yourself out of some solid steel pieces im sure u could weld something more solid than what they sell oem.snooky pa.
@syxxes2 жыл бұрын
Well maybe not me... but someone!🤣
@draperjd02386 жыл бұрын
Ya need all the steering you can have to sneak through all the fu**ing pine trees while your side hilling!!!
@syxxes6 жыл бұрын
Not fun with squishy steering!
@seanw54966 жыл бұрын
you could fix it or just buy a reliable sled
@syxxes6 жыл бұрын
Or you could buy the 35$ bracket xD
@Rantny-9mm4 жыл бұрын
Sure this will be a continuing problem for next 10 years..we all know Arctic cat does not take responsibility for their crap sleds. I own 2. Be the last Arctic Cats I ever own. Crap clutches...crap suspension bushings...diamond drive bearing failures...sloppy steering ...crap stock reeds...the list is long. Why you guys ride Cats is beyond me.
@kalybcoats82302 жыл бұрын
How do ya get the nut on the end of the steering shaft tight ? It just spins how the heck do ya hold it ? Custom tool? Lol
@greatalaska6429 Жыл бұрын
@@kalybcoats8230 I slipped a square key in next to the bottom brackets side and held it with a vise grip, then you can tighten or loosen the nut while the ball joint is held in place with the key.
@Jeff-fs1zy6 жыл бұрын
Arctic cat steering fix.... 🤔hmmmmm.....put off cliff Buy a Skidoo G4 850 Summit Equals problem fixed 👍🏻
@syxxes6 жыл бұрын
JIVEN IT AGAIN the new summits are nice! I'm not into spending 800 bucks a season in belts tho.