Adam Drake from Mugen Seiki Racing talks about installing servos.

[@wallyj2000]

Thanks so much for all your videos are outstanding and very helpful, also love the fact that there is no long intros and no annoying music everyone should take notes.

[@AdamDrake]

Glad you like them!

[@KeyBumps1]

Awesome video. This literally answered every question/concern I had when originally installing my servos

[@AdamDrake]

My pleasure!

[@jtr4405]

Great video. Could u go one step further and show how you set up your throttle/brake linkages and how u program them with the futaba 7px. Cheers Tommy

[@AdamDrake]

Yes, I have videos on how to set up the throttle and brake linkage.

[@RcOffroad9513]

Great tip Adam! Hope your doing great! Thanks!

[@AdamDrake]

Thank you very much!

[@sarahwalker5885]

Hello I have a ftx torro nitro and notice it has 2 servos where as my FTX carnage brushless has only 1 , do I order both steering servos for the nitro car . As I cannot find a throttle servo?

[@AdamDrake]

These should work for steering or throttle.

[@skeetskeetonu6928]

I have The Protek 170 SBL Hooked it up and It Keeps Beeping And I Cant Turn Or Anything Need Some Help

[@AdamDrake]

The beeping should stop once you turn on the radio.

[@pauljkknox]

Thank you for sharing your knowledge. You will be receiving more subscribers...

[@AdamDrake]

My pleasure, thank you very much! It's greatly appreciated.

[@billbarberconstructioninc.17]

Like the new outro music, now you need a killer intro clip!

[@AdamDrake]

Thanks!

[@LuisFlores-qo5ey]

Hope you guy's are staying safe had a question about the plastic piece that lockes the servo down what do I use for protek 170 for mbx8 thanks

[@AdamDrake]

Hello, I hope you and your family are safe and healthy. I use the Flash Point FP2112 FP 3mm Blue Countersunk Washers to secure the servos.

[@Hornet7648]

Hello Adam... Thanks again for your videos. Then... You do not use the brass eyelets? Excuse me but my English is not good. Thanks.

[@AdamDrake]

No, I don't use the brass eyelets.

[@hfdsocalss]

Who gives similar install info but for losi vehicles (I run 8x)? You're vids are so informative

[@AdamDrake]

Thank you!

[@nebaartur]

Great video. I have one question? Is there a difference when installing servo with plastic house?

[@AdamDrake]

I don't understand. Can you please explain?

[@nebaartur]

@@AdamDrake you servos have aluminium case. I have servos with plastic case. Do you cut "grommets" in case when servo have plastic case.

[@AdamDrake]

@@nebaartur Yes, I do the same for both aluminum and plastic case.

[@nebaartur]

@@AdamDrake Thanks! Prof. Drake.

[@AdamDrake]

@@nebaartur My pleasure!

[@rccarhobbyinarabic4088]

Very nice Install servo 😍😍👍👍

[@AdamDrake]

Thank you!

[@davidpeterson9422]

Great tip thanks ✌✌👍🇨🇦

[@AdamDrake]

Thank you!

[@rchopup2639]

I would be awesome if the manufacturer integrated your drum and Dremel sanding modifications back into production models to accommodate the servo wires like you have done. I've noticed that the servo wire is an afterthought for several manufacturer's servo trays. Perhaps the designers don't digitally model the servo wire protrusions when they design these trays. It makes me think that the designers haven't ever installed a servo. Maybe they need to require the designers to also build and race the models they design... "Required build and race time for the Engineers; Especially rebuilding things that break on race day"... OR Require that all design changes be vetted by the drivers.

[@AdamDrake]

Yes, this is something to consider in the future. Servos have been a standard size for so many years, but some servo designs have slightly changed.

[@PreludeDude]

Serpent does the same and doesn't really provision well for the servo wires... The detachable harness thing is not common enough that this should be a thing in my opinion.

[@HL-OOI]

Cool tip..damn annoying when u keep turning and it never gets tightened with the gourmet on top 😁

[@AdamDrake]

My pleasure!

[@zannisgoutis2869]

TQ viewer again!! Haha!

[@AdamDrake]

Very nice!

[@HL-OOI]

I hate that plastic piece on all RCs..after a while it will just strip and have to use a longer screw with nut..😁

[@AdamDrake]

It can happen.

[@KeyBumps1]

Awesome video. This literally answered every question/concern I had when originally installing my servos

[@AdamDrake]

Awesome, happy to help!